carboxamide wrote:Resolved.

I've been messing with this issue for 2 days, but after writing this post I immediately realized. I am connecting the HDMI, but not into the GPU connected port.

Brave of you to admit that. LOL.

logrusx wrote:The emerge man page?

Best Regards,
Georgi

If I must. Was hoping for something online and more formattet, but it is what it is.

Maybe I haven't found it, but I still struggle with the symbols and output. I can usually muddle through, but I would be happy to sit down with a complete, thorough explanation of all the symbols, etc. I only seem to find piecemeal answers and never exactly what I'm looking to understand.

I have hd audio drivers for both my nvidia card, and alc1220.
https://pastebin.com/zwxCL8LW
I want HDMI 2, but pavucontrol shows that one as unplugged and unavailable. I want sound from my gs2f7a, but I can't get sound out of it. I'm completely lost when it comes to sound in linux, and is has "just ...

Seems the fix was intermittent. Sometimes kernel panic on trying, I guess to load the ahci driver for 2nd chipset, sometimes it works. I'm trying different kernels to see if there's something newer than 5.15.80 (which works perfectly). If not I can fall back to that. So far, 6.12.23 seems to be ...

I suspect you mean you you are not able to mount the NTFS file system for "Win10 drive" for your newer kernel.

can you share lsblk -f to verify if a device/partition detected by the newer kernel.
and lsmod to confirm no dynamic ntfs module loaded
and the newer kernel .config? to verify if any ntfs ...

I suspect you mean you you are not able to mount the NTFS file system for "Win10 drive" for your newer kernel.

can you share lsblk -f to verify if a device/partition detected by the newer kernel.
and lsmod to confirm no dynamic ntfs module loaded
and the newer kernel .config? to verify if any ntfs ...

I suspect you mean you you are not able to mount the NTFS file system for "Win10 drive" for your newer kernel.

can you share lsblk -f to verify if a device/partition detected by the newer kernel.
and lsmod to confirm no dynamic ntfs module loaded
and the newer kernel .config? to verify if any ntfs ...

pingtoo wrote:What is "EFISP"? I cannot find any reference for the term.

Apologies efi system partition.

2 nvme m2 drives, one with Gentoo, one with Win10. My old kernel, 5.15.80, Sees the Win10 drive, which is where the Win bootloader is in the EFISP. lsblk and blkid both see it. I can mount the ESP and manipulate files there. My newer kernel is not aware of the Win10 drive at all. It doesn't even ...

Hello and thank you for this beautiful community.
Last time I installed Gentoo, there was problem with wifi drivers. I have intel wifi drivers, iwl wifi drivers.
Can I install with this method ? I need desktop profile Gentoo.

https://forums.gentoo.org/viewtopic-p-8597910.html

Should I skip ...

What command are you issuing exactly?

I had some efibootmgr issues recently, also it didn't lasted for the next login, until I added the -d parameter
Because my root=/= /dev/sda, I always have to use the -d parameter. That wasn't my issue.

Have found a method that works for my bios, anyway:
I ...

So, I have managed to populate my /sys/firmware/efi/efivars by flipping my bios' nx bit back on. I can now see the variables both from the min install environment, outside of chroot, and inside. I then
'modprobe efivarfs'
'mount -o rw,remount /sys/firmware/efi/efivars'
and efibootmanager will show ...

Just so happens that when fiddling in my new motherboard's bios late one night, I inadverdantly flipped the NX bit off. Thanks for all who tried to help.

New motherboard: CSM is off in bios. Windows installed and runs in UEFI mode just fine. Gentoo install still exists, with a known-good efi partition and everything. As a matter of fact, Windows is using this partition for its own boot loader. I went to add rEFInd to EFI boot list with efibootmgr ...

I used to rock my own custom kernel, but got tired of spending hours upon hours updating my kernel configuration. I'm now using the `gentoo-kernel-bin` package.

It can be fun, but it's not worth the excessive time it takes maintaing it. I work full time and I have a family to take care of ...

Hello.

I hope it fits here.

I have those components.
Ryzen 3700x
Crucial Ballistix red DIMM Kit 32GB, DDR4-3600, CL16-18-18-38 (BL2K16G36C16U4R)
B550 MSI Gaming EDGE WIFI

I only use 3600MHZ with a bit lower timings and a bit more voltage on the RAM.

When I understood correctly anything more ...

kukibl wrote:

bammbamm808 wrote:The new cpu also runs much, much cooler.

What is the highest temperature you reach when emerging?

And wow... those merge times are really something.

Its very warm here, and I saw a maximum of about 75C. I have yet to do any fine tuning to voltages and limits, etc.

nikolis wrote:Enjoy !

I am. I love it when costly upgrades work out better than Id hoped. Also, my old IMC limited me to 3k dram freq., but this one easily doing 3200 with no extra voltage.

After 3 years or so on my venerable 2700x, I finally managed an upgrade Ive looked forward to for some time: A brand new 3900x. Why not a 5900x? It looks as though the gains per dollar arent as sweet with ryzen3 as with the 3900x. Long story short: gcc-10.3 went from 32 min @ -j14, to 19 min @ -j20 ...

delizza,

welcome to Gentoo forum !


[...]There is already an EFI partition and I'm not sure if I'm supposed to create another one for Gentoo or if they both share one EFI partition.
You have to use the existant EFI partition. With UEFI you can have many bootable executables (bootloader ...

I have re-installed my entire system anew, but found a typo for my user data. I apparently double tapped the 't' at the end of my first name and now it comes up as Robertt.
How do I go about changing this.
I re-installed about 6 months ago and it took me nearly the entire week getting it just how ...

I have heard many definitions of this distribution
I told myself I had to try it
Is there a way to easily install it ?
Well, I have to ask this question here, right ?
**********
Should Gentoo finally be installed or not ? now either with a command line or a light graphical environment
Can you ...

...
Unless you're massively misconfigured, you wont notice much, if any performance improvement. Get a hobby that you enjoy?
Once you get a kernel configured and working, which is kind of basic to Gentoo, you don't really have to do much to maintain it. But, don't stop. Keep sharing. How do you ...

I keep on wanting to start making my custom kernel but I just don't/can't be bothered to make one.

I have all the time in the world currently but I just don't want to?

For now I'm using a slighly edited -bin .config (a bit of stuff taken out) which is okay for me but I want to also squeeze out ...