Thanks. Don't know I how missed it.

I have been doing a reinstall recently using the livegui USB. I first downloaded a version with a previous date and used it successfully.

However, I ended up needing to do it again. This time it was the 8-25-2024 version. This version fails to load the kde environment. Instead. I just get a ...

Since I was unable to find fw updates that addressed the problem, I modified the kernel with a quirk.

Bear in mind that my experience with patches is limited, here is what I have.


--- drivers/nvme/host/pci.c 2022-08-01 13:18:49.806650206 -0700
+++ ../new_pci.c 2022-08-01 13:12:31.749992593 ...

I have a new laptop: Asus Strix Scar 17 se.

It has two nvme drives (Micron_3400_MTFDKBA1T0TFH). When purchased, with Windows, the two drives were mirrored (raid 0). Since then, trying to install linux, only one drive can be seen at a time.

Here is an excerpt from dmesg using the livecd:

livecd ...

Version 6 of redis supports TLS directly, but I am having trouble getting that to work. Their documentation emphasizes that there is a directive make BUILD_TLS=yes required.

I am trying to prove to myself that the setting BUILD_TLS is there, but I don't know enough to answer that question ...

I recently updated the profile to 17.1 following the instructions as far as I can tell correctly, and successfully. A few days ago I noticed I had a runaway process that showed in as kworker/0:1+kacpid. In my investigations, one thing led to another, things got worse. Long story short I finally ...

If you are still having a problem invoking vnc you might try using for example -vnc :5, where the ip address is implied and you are just selecting the display port for vnc. When I use it this way, vnc is available on both localhost and other ip address.

Hope this helps.

All right I am going to mark this problem as (somewhat) solved.

Basically, I am satisfied, although there is an unresolved issue which I will look at later.

For those who look at this later:

If you unremark the entry in /etc/default/grub

GRUB_TERMINAL=console

it sidesteps the issue and all the ...

Thanks for taking a look.

Fairly lengthy, but here they are.

grub.cfg

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load ...

I am having a problem on a system that when upgrading to Grub2 from grub.

I am upgrading to Grub2.

My problem occurs when I implementing the chainloading portion.

Sequence:
reboot
get original grub menu
select GRUB2 Chainload
get Grub2 menu
select to gnu/linux
screen clears, shows loading ...

not enough bandwidth

http://stackoverflow.com/questions/9781770/capturing-multiple-webcams-uvcvideo-with-opencv-on-linux

are you running low tech hardware ?

i have a working setup with 2 640x480 camera @60fps on the same usb hub 2.0 with an old intel e5300 , so any recent motherboard should ...

I'm not sure if this is in the right section, so please point somewhere else if necessary.

I have started playing with opencv and I want to use two webcams for this. While one works just fine, I am able to use two only if the resolution is moved from 640x480 to 320x240.

The error that I get with a ...

Sorry Gerard,

I interpreted that as a let-me-google-that-for-you comment, and so I apologize. I have indeed searched google for linux cad and open source. What I was hoping for was someone who had first hand knowledge of something that they use, like and had gotten to work with Gentoo.

I thank you ...

Thanks, the reason that I thought so was:
http://forums.gentoo.org/viewtopic-t-80 ... art-0.html

but I'll take a close look at the ebuild that resides there.

Thanks very much.

Google's a wonderful thing, but it is not showing me the reason that FreeCAD was removed from portage. It seemed like someone closer to Gentoo might know.

I noticed that FreeCAD used to be in portage, but is no longer there. Does anyone happen to know the reason that it was taken out?

Also, what I am really after is the best open source CAD program for 3d work and solid modeling.

Thanks for any help that you can give me.

Thanks for your help.

Thanks very much for your reply.

I've been mulling over what you have written and have realized some additional questions and comments:

1. I was originally under the impression that raid1 meant only using two drives, studying your diagram and reading a little helped me to understand that two ...

I am going to be setting up a new system and I am going to use software RAID.

I see in the guidelines that it is recommended that the boot drive not be part of the raid system. It pains my thrifty nature to use a several GB drive for just booting the system, since the boot partition is typically ...

I am still having a problem and have been unable to solve it.

I had been holding off rebooting, because I still had a number of programs running on that system, but finally I did and, naturally, the python stuff is failing now.

I have now tried rolling back to python 2.4 by reemerging it and ...

I upgraded to python 2.5 on a system and all appeared to be normal as far as the upgrade. Then, I ran python-updater and everything appeared to be running smoothly except for the final step on each package.

The following is a typical sample:
* Performing Python Module Cleanup .. ...
* Cleaning ...

Very nice. I never noticed it in there.

Thanks very much.

I'm running out of room on my laptop and was looking for things to delete. Distfiles that have been long superceded look like good candidates.

Of course, I can pick through them and delete. But, I was wondering if there was some automated method that I could invoke (or should have been using) that ...

I have switched back to metalog and cpu issues are resolved.

oh, and to answer your other question, there are no other logs posted to this computer.