[PALUDIS] Support thread (current v. 0.30.*) - Part 5

Message

mroconnor · Post by **mroconnor** » Fri Jan 30, 2009 7:05 pm

I just made the jump to Paludis and I must admit I am not even sure where to start to fix the errors it throws. Can someone point me in the right direction to fix this?

I have an odd feeling it is one of those 'it's the ebuilds fault' you cant do anything about it.

Code: Select all

cosmo2 ~ # paludis -pi everything --dl-reinstall always
paludis@1233342008: [QA e.repo_name.unusable] Couldn't open repo_name file in '/var/paludis/repositories/local/profiles/', falling back to generated name 'x-local' (ignore this message if you have yet to sync this repository).
paludis@1233342008: [QA e.repo_name.unusable] Couldn't open repo_name file in '/var/paludis/repositories/the-overlay/profiles/', falling back to generated name 'x-the-overlay' (ignore this message if you have yet to sync this repository).
paludis@1233342008: [QA e.repo_name.unusable] Couldn't open repo_name file in '/var/paludis/repositories/local/profiles/', falling back to generated name 'x-local' (ignore this message if you have yet to sync this repository).
paludis@1233342008: [QA e.repo_name.unusable] Couldn't open repo_name file in '/var/paludis/repositories/the-overlay/profiles/', falling back to generated name 'x-the-overlay' (ignore this message if you have yet to sync this repository).
Building target list... 
Building dependency list...paludis@1233342028: [WARNING e.cache.save.failure] Not writing cache file to '/var/cache/paludis/metadata/dev-jokey/app-emulation/virtualbox-bin-2.1.2' due to exception 'Empty slot dependency specified' (paludis::PackageDepSpecError)

Unhandled exception:
  * In program paludis -pi everything --dl-reinstall always:
  * When performing install action from command line:
  * When executing install task:
  * When building dependency list:
  * When adding NamedSetDepSpec 'everything':
  * When adding PackageDepSpec 'app-emulation/virtualbox-bin':
  * When adding package 'app-emulation/virtualbox-bin-2.1.2:0::dev-jokey':
  * When parsing metadata key 'RDEPEND' from 'app-emulation/virtualbox-bin-2.1.2:0::dev-jokey':
  * When parsing '!!app-emulation/virtualbox-ose !app-emulation/virtualbox-ose-additions ~app-emulation/virtualbox-modules-2.1.2 !headless? ( x11-libs/libXcursor media-libs/libsdl:[X] x11-libs/libXrender x11-libs/libXfixes media-libs/libmng media-libs/jpeg media-libs/libpng x11-libs/libXi x11-libs/libXrandr x11-libs/libXinerama x11-libs/libXft media-libs/freetype media-libs/fontconfig x11-libs/libXext dev-libs/glib chm? ( dev-libs/expat ) ) x11-libs/libXt dev-libs/libxml2 x11-libs/libXau x11-libs/libX11 x11-libs/libSM x11-libs/libICE x11-libs/libXdmcp sys-apps/usermode-utilities net-misc/bridge-utils x86? ( sys-libs/libstdc++-v3 ) ':
  * When parsing from offset '111':
  * When parsing from offset '144':
  * When parsing elike package dep spec 'media-libs/libsdl:[X]':
  * When parsing generic package dep spec 'media-libs/libsdl:[X]':
  * Empty slot dependency specified (paludis::PackageDepSpecError)

The repo_name messages I can handle when I paludis -s. But the messages about the virtaulbox-bin and RDEPEND mean nothing to me. I tried this, paludis -pi libsdl to see if there was a missing 'X' use flag but it looks fine to me.

Code: Select all

These packages will be installed:

* media-libs/libsdl [R 1.2.13-r1] <target>
    X -aalib alsa -arts audio -custom-cflags -dga -directfb -esd -fbcon -ggi joystick -libcaca -nas -opengl -oss -pulseaudio (-svga) video -xinerama -xv build_options: -optional_tests split strip

Thanks for any assistance.

gimpel · Post by **gimpel** » Sat Jan 31, 2009 3:32 pm

Hm, paludis just fucked up itself.

gcc update 4.3.2 -> 4.3.3:

Code: Select all

<<<         /usr/lib64/gcc/x86_64-pc-linux-gnu/4.3.2/32/crtend.o                                                    
<<<         /usr/lib64/gcc/x86_64-pc-linux-gnu/4.3.2/32/crtbeginTS.o                                                
<<<         /usr/lib64/gcc/x86_64-pc-linux-gnu/4.3.2/32/crtbeginT.o                                                 
<<<         /usr/lib64/gcc/x86_64-pc-linux-gnu/4.3.2/32/crtbeginS.o                                                 
<<<         /usr/lib64/gcc/x86_64-pc-linux-gnu/4.3.2/32/crtbegin.o                                                  
--- [!empt] /usr/lib64/gcc/x86_64-pc-linux-gnu/4.3.2/32                                                             
--- [!empt] /usr/lib64/gcc/x86_64-pc-linux-gnu/4.3.2                                                                
--- [!empt] /usr/lib64/gcc/x86_64-pc-linux-gnu                                                                      
--- [!empt] /usr/lib64/gcc                                                                                          
--- [!type] /usr/lib                                                                                                
--- [!time] /usr/bin/x86_64-pc-linux-gnu-gcc-4.3.2                                                                  
--- [!time] /usr/bin/x86_64-pc-linux-gnu-g++-4.3.2                                                                  
--- [!time] /usr/bin/x86_64-pc-linux-gnu-cpp-4.3.2                                                                  
--- [!time] /usr/bin/x86_64-pc-linux-gnu-c++-4.3.2                                                                  
--- [!time] /usr/bin/gcc-4.3.2                                                                                      
--- [!time] /usr/bin/g++-4.3.2                                                                                      
--- [!time] /usr/bin/cpp-4.3.2                                                                                      
--- [!time] /usr/bin/c++-4.3.2                                                                                      
--- [!empt] /usr/bin                                                                                                
--- [!empt] /usr                                                                                                    
--- [cfgpr] /etc/eselect/compiler/x86_64-pc-linux-gnu-4.3.2.conf                                                    
--- [!empt] /etc/eselect/compiler                                                                                   
--- [!empt] /etc/eselect                                                                                            
--- [!md5 ] /etc/env.d/gcc/x86_64-pc-linux-gnu-4.3.2                                                                
--- [!empt] /etc/env.d/gcc                                                                                          
--- [!empt] /etc/env.d                                                                                              
--- [!empt] /etc                                                                                                    
locked_pipe_command: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory

Code: Select all

# paludis -i1 gcc
/usr/bin/paludis: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory

Nice one!

env-update && source /etc/profile helps here. (If others stumble over this one)

mroconnor · Post by **mroconnor** » Tue Feb 03, 2009 8:30 pm

Is there somewhere I can learn how to make a set? I was thinking of making a toolchain set that I could use to rebuild the toolchain easily. Thanks for the help.

loftwyr · Post by **loftwyr** » Tue Feb 03, 2009 10:19 pm

Basic paludis sets are easy

use * at the beginning of a line for a set
use ? for an package without a slot (foo/bar)
use ?: for a package with a slot (foo/bar:4.2)

There's the basics.

The file needs to have a .conf extension.

kimrhh · Post by **kimrhh** » Wed Feb 04, 2009 11:35 am

use * at the beginning of a line for a set
use ? for an package without a slot (foo/bar)
use ?: for a package with a slot (foo/bar:4.2)

There's the basics.

That is incorrect. Instead of posting misinformation you should point others to the relevant documentation:

http://paludis.pioto.org/configuration/sets.html

pigeon768 · Post by **pigeon768** » Mon Feb 09, 2009 2:56 pm

Error with paludis -i world --dl-reinstall always --continue-on-failure if-satisfied:

Code: Select all

moamp ~ # grep -a '(unsatisfied' build.log
(558 of 946, 30 skipped, 3 failed) Skipping gnome-base/gdm-2.20.9:0::gentoo (unsatisfied 'virtual/pam')
(559 of 946, 31 skipped, 3 failed) Skipping x11-misc/xscreensaver-5.08:0::gentoo (unsatisfied 'virtual/pam')
(586 of 946, 32 skipped, 3 failed) Skipping kde-base/kdebase-kioslaves-4.2.0:4.2::gentoo (unsatisfied 'virtual/ssh')
(603 of 946, 33 skipped, 3 failed) Skipping dev-python/PyQt4-4.4.4-r2:0::gentoo (unsatisfied 'virtual/python')
(667 of 946, 34 skipped, 3 failed) Skipping sci-geosciences/gpsd-2.37:0::gentoo (unsatisfied 'virtual/dev-manager')

It happens occasionally without --dl-reinstall always, but I *believe* it only starts happening after a package fails - IOW I believe it's an error specific to --continue-on-failure if-satisfied.

There are threads on the paludis mailing list about it, but the complaints are somewhat non-specific. (no error messages, no analysis, no background)

edit: there are more skipped packages - at least 29 more, obviously - but build.log seems to be corrupted.

Mr. Tao · Post by **Mr. Tao** » Tue Feb 10, 2009 1:05 am

I do use paludis for clean installation on new HD and I'm repeatedly facing the same problem. Some ebuilds (e.g. net-dns/avahi) in some parts (pkg_preinst in avahi's case) include instructions for adding new user/group in the system.

Unlike emerge, paludis doesn't seem to honor these instruction what is cause of nasty problems. Usually I have to run something like ebuild /usr/portage/net-dns/avahi/avahi-0.6.24.ebuild preinst to fix it. This is very annoying.

I wonder if I'm just missing something in configuration or the problem is in paludis itself.

shazeal · Post by **shazeal** » Fri Feb 13, 2009 12:42 pm

I dont get this, portage had slotted phpmyadmin-3.1.1 and 3.1.2, I switched to paludis. And now when I try and do paludis -i -p world I get this...

Code: Select all

 * In program paludis -i -p world:
  * When performing install action from command line:
  * When executing install task:
  * When building dependency list:
  * When adding NamedSetDepSpec 'world':
  * When adding PackageDepSpec 'dev-db/phpmyadmin:3.1.1':
  * No versions of 'dev-db/phpmyadmin:3.1.1' are available.

So I uninstalled phpmyadmin:3.1.1 but the error still comes back, so I removed 3.1.2 as well same thing. I can install other stuff fine, but I cant run the update. Any ideas why its doing this?[/code]

slangdaddy · Post by **slangdaddy** » Fri Feb 13, 2009 2:49 pm

@shazeal You could check your world file for occurences of phpmyadmin.

shazeal · Post by **shazeal** » Fri Feb 13, 2009 8:52 pm

Yup it was in there, backed it up and deleted the line. It all works great now thank you

sternklang · Post by **sternklang** » Sat Feb 14, 2009 4:33 pm

Current paludis now includes a manifest-creation utility, appareo. I've been eagerly awaiting this as my only use of the "ebuild" command is to generate manifests.

There is as yet nothing on the Paludis web site describing this in detail, and so far using the man page info I have not been able to get it to work. Trying to generate a manifest for an ebuild in my local repository fails:

Code: Select all

$ sudo appareo --manifest tomboy-0.12.1.ebuild 

Unhandled exception:
  * In program appareo --manifest tomboy-0.12.1.ebuild:
  * When loading profiles.desc:
  * E Repository configuration error: No profiles.desc found (maybe this repository is not synced, or maybe you need to specify its master (paludis::ERepositoryConfigurationError)

This repository doesn't sync and doesn't have it's own profiles.desc, so I tried this:

Code: Select all

$ sudo appareo --manifest tomboy-0.12.1.ebuild --master-repository-name gentoo

Unhandled exception:
  * In program appareo --manifest tomboy-0.12.1.ebuild --master-repository-name gentoo:
  * When initialising NoConfigEnvironment at '/usr/local/overlays/myoverlay':
  * Repository 'myoverlay' depends upon 'gentoo', which is not configured (paludis::ConfigurationError)

There is indeed a gentoo.conf in /etc/paludis/repositories so I'm not sure what the issue is:

Code: Select all

$ cat /etc/paludis/repositories/gentoo.conf 
location = ${ROOT}/usr/portage
sync = rsync://rsync.us.gentoo.org/gentoo-portage
distdir = /usr/portage/distfiles
format = ebuild
names_cache = ${location}/.cache/names
write_cache = /var/cache/paludis/metadata

$ cat /etc/paludis/repositories/myportage.conf 
location = ${ROOT}/usr/local/overlays/myoverlay
sync = 
master_repository = gentoo
format = ebuild
names_cache = ${location}/.cache/names
write_cache = /var/cache/paludis/metadata
cache=/var/empty
importance = 10

Every other aspect of paludis usage works as expected so I believe my configuration is correct. Any help would be appreciated.

cheater1034 · Post by **cheater1034** » Sat Feb 14, 2009 5:58 pm

sternklang wrote:Current paludis now includes a manifest-creation utility, appareo. I've been eagerly awaiting this as my only use of the "ebuild" command is to generate manifests.

There is as yet nothing on the Paludis web site describing this in detail, and so far using the man page info I have not been able to get it to work. Trying to generate a manifest for an ebuild in my local repository fails:

Run:

Code: Select all

# appareo --master-repository-name gentoo --extra-repository-dir /usr/portage BLAH

You can put this stuff in metadata/layout.conf too in the repository in question.
I like it a lot, since you can create all the manifests from the base directory instead of the ebuild directories, just -P name

sternklang · Post by **sternklang** » Sat Feb 14, 2009 6:13 pm

cheater1034 wrote:Run:
Code: Select all
# appareo --master-repository-name gentoo --extra-repository-dir /usr/portage BLAH

Works perfectly, thanks!

cheater1034 wrote:You can put this stuff in metadata/layout.conf too in the repository in question.

I'm not familiar with that config file, other than the entry in the appareo man page. Can you point me to further documentation on that? Also, neither gentoo portage nor any of the overlays I manage with playman seem to have such a file, so am I correct in assuming this is something new with appareo?

cheater1034 · Post by **cheater1034** » Sat Feb 14, 2009 6:28 pm

It's used in exheres repositories too. I don't believe portage has any use for the layout.conf file like paludis does, anyway you can put masters = in layout.conf:

Code: Select all

# cat layout.conf
masters = gentoo

I do not know if it exists or what the variable is for the location of the master, but I'm sure it's written somewhere i just haven't really looked.
(I don't understand why it doesn't use the repositories/conf file because it specifies location in there)

I would think masters = gentoo would make it look at repositories/gentoo.conf file but it doesnt work that way yet apparently.

kimrhh · Post by **kimrhh** » Sat Feb 14, 2009 8:11 pm

guys, you should really ask these question on the paludis user mailing list, you are not right about layout and configs

taipan67 · Post by **taipan67** » Tue Feb 17, 2009 8:50 am

Please excuse what i'm sure will be a repeat question, but i'm buggered if i can find the answer anywhere i've looked...

Is there a Paludis equivalent to 'PORT_LOGDIR'? I'm using paludis for the first time, and one particular package, tango-icon-theme, installed successfully, but my file-manager, thunar, displays it's hideous fallback-icon far more frequently than it ought to, and i suspect that the icon-theme failed to install a lot of icons (there were countless messages highlighted in red which flashed by on the console too fast to read), but without a log of the installation i can't check what those highlighted messages said.

Thanks in advance.

tranquilcool · Post by **tranquilcool** » Tue Feb 17, 2009 2:13 pm

In program paludis -i world -p:
* When performing install action from command line:
* When executing install task:
* When building dependency list:
* When adding NamedSetDepSpec 'world':
* When adding PackageDepSpec 'app-mobilephone/obex-data-server':
* When adding package 'app-mobilephone/obex-data-server-0.3.4:0::gentoo':
* When adding build dependencies as pre dependencies:
* When adding PackageDepSpec '>=net-wireless/bluez-libs-3.13':
* When adding package 'net-wireless/bluez-libs-3.36:0::gentoo':
* When adding build dependencies as pre dependencies:
* When checking BlockDepSpec '!net-wireless/bluez':
* Block: net-wireless/bluez (paludis::BlockError)

any help?

SlashBeast · Post by **SlashBeast** » Tue Feb 17, 2009 2:16 pm

You can only have bluez or bluez-libs + bluez-utils in system..

tranquilcool · Post by **tranquilcool** » Tue Feb 17, 2009 2:27 pm

SlashBeast wrote:You can only have bluez or bluez-libs + bluez-utils in system..

so do i have to uninstall bluez-libs + bluez-utils? and i don't have both installed
bluez is a dependency of kde4 from kde-testing.

another question please.
how can i keyword the qt-live-all-kde from qting-edge?
paludis wants to downgrade to the portage version.

tranquilcool · Post by **tranquilcool** » Tue Feb 17, 2009 3:45 pm

tranquilcool wrote:
SlashBeast wrote:You can only have bluez or bluez-libs + bluez-utils in system..
so do i have to uninstall bluez-libs + bluez-utils? and i don't have both installed
bluez is a dependency of kde4 from kde-testing.

another question please.
how can i keyword the qt-live-all-kde from qting-edge?
paludis wants to downgrade to the portage version.

EDIT: SOLVED
unmasked;
app-mobilephone/obex-data-server

masked;
echo "x11-libs/qt" >> /etc/paludis/package_mask.conf

uvok · Post by **uvok** » Wed Feb 25, 2009 4:28 pm

I have a similar error like mikkoc had, but for me, it says

Code: Select all

Ignoring run dependencies due to exception 'Error searching for 'virtual/xft': no available versions' (paludis::AllMaskedError)

Unfortunately, I cannot unnstall it, as there is no version available...

Full log is here btw:
http://dpaste.com/1002/
These

Code: Select all

paludis@1235500715: [QA e.profile.no_match] (same context) No match for '->=gnome-base/gnome-desktop-2.24.0'. This usually indicates a bug in your profile.

errors are very annoying, too. How can I get rid off them?

paludis-info:

Code: Select all

 # paludis --info
paludis 0.34.4
Paludis build information:
    Compiler:
        CXX:                   i686-pc-linux-gnu-g++ 4.3.3
        CXXFLAGS:               -O2 -march=i686 -pipe
        LDFLAGS:               -Wl,-O1
        DATE:                  2009-02-24T18:29:27+0100

    Libraries:
        C++ Library:           GNU libstdc++ 20090124

    Reduced Privs:
        reduced_uid:           115
        reduced_uid->name:     paludisbuild
        reduced_uid->dir:      /var/tmp/paludis
        reduced_gid:           1020
        reduced_gid->name:     paludisbuild

    Paths:
        DATADIR:               /usr/share
        LIBDIR:                /usr/lib
        LIBEXECDIR:            /usr/libexec
        SYSCONFDIR:            /etc
        PYTHONINSTALLDIR:      
        RUBYINSTALLDIR:        /usr/lib/ruby/site_ruby/1.8/i686-linux

Environment:
    Format:                    paludis
    Config dir:                /etc/paludis
    World file:                /var/db/pkg/world

Repository installed-virtuals:
    format:                    installed_virtuals
    root:                      /

Repository virtuals:
    format:                    virtuals

Repository gentoo:
    format:                    ebuild
    location:                  /usr/portage
    append_repository_name_to_write_cache: true
    binary_destination:        false
    binary_keywords:           
    binary_uri_prefix:         
    builddir:                  /var/tmp/paludis
    cache:                     /usr/portage/metadata/cache
    distdir:                   /var/portage/distfiles
    eapi_when_unknown:         0
    eapi_when_unspecified:     0
    eclassdirs:                /usr/portage/eclass
    ignore_deprecated_profiles: false
    layout:                    traditional
    names_cache:               /usr/portage/.cache/names
    newsdir:                   /usr/portage/metadata/news
    profile_eapi_when_unspecified: 0
    profiles:                  /usr/portage/profiles/default/linux/x86/2008.0/desktop
    securitydir:               /usr/portage/metadata/glsa
    setsdir:                   /usr/portage/sets
    sync:                      rsync://rsync.europe.gentoo.org/gentoo-portage
    sync_options:              
    use_manifest:              use
    write_cache:               /var/empty

Repository installed:
    format:                    vdb
    location:                  /var/db/pkg
    builddir:                  /var/tmp/paludis
    names_cache:               /var/db/pkg/.cache/names
    provides_cache:            /var/db/pkg/.cache/provides
    root:                      /
...

edit:
Okay, The xft message disappeared after I reinstalled qt-3; but still thereare these strange profile.no_match errors...

mroconnor · Post by **mroconnor** » Wed Feb 25, 2009 5:41 pm

uvok wrote:I have a similar error like mikkoc had, but for me, it says

Code: Select all

Ignoring run dependencies due to exception 'Error searching for 'virtual/xft': no available versions' (paludis::AllMaskedError)

Unfortunately, I cannot unnstall it, as there is no version available...

Full log is here btw:
http://dpaste.com/1002/
These

Code: Select all

paludis@1235500715: [QA e.profile.no_match] (same context) No match for '->=gnome-base/gnome-desktop-2.24.0'. This usually indicates a bug in your profile.

errors are very annoying, too. How can I get rid off them?

paludis-info:

Code: Select all

 # paludis --info
paludis 0.34.4
Paludis build information:
    Compiler:
        CXX:                   i686-pc-linux-gnu-g++ 4.3.3
        CXXFLAGS:               -O2 -march=i686 -pipe
        LDFLAGS:               -Wl,-O1
        DATE:                  2009-02-24T18:29:27+0100

    Libraries:
        C++ Library:           GNU libstdc++ 20090124

    Reduced Privs:
        reduced_uid:           115
        reduced_uid->name:     paludisbuild
        reduced_uid->dir:      /var/tmp/paludis
        reduced_gid:           1020
        reduced_gid->name:     paludisbuild

    Paths:
        DATADIR:               /usr/share
        LIBDIR:                /usr/lib
        LIBEXECDIR:            /usr/libexec
        SYSCONFDIR:            /etc
        PYTHONINSTALLDIR:      
        RUBYINSTALLDIR:        /usr/lib/ruby/site_ruby/1.8/i686-linux

Environment:
    Format:                    paludis
    Config dir:                /etc/paludis
    World file:                /var/db/pkg/world

Repository installed-virtuals:
    format:                    installed_virtuals
    root:                      /

Repository virtuals:
    format:                    virtuals

Repository gentoo:
    format:                    ebuild
    location:                  /usr/portage
    append_repository_name_to_write_cache: true
    binary_destination:        false
    binary_keywords:           
    binary_uri_prefix:         
    builddir:                  /var/tmp/paludis
    cache:                     /usr/portage/metadata/cache
    distdir:                   /var/portage/distfiles
    eapi_when_unknown:         0
    eapi_when_unspecified:     0
    eclassdirs:                /usr/portage/eclass
    ignore_deprecated_profiles: false
    layout:                    traditional
    names_cache:               /usr/portage/.cache/names
    newsdir:                   /usr/portage/metadata/news
    profile_eapi_when_unspecified: 0
    profiles:                  /usr/portage/profiles/default/linux/x86/2008.0/desktop
    securitydir:               /usr/portage/metadata/glsa
    setsdir:                   /usr/portage/sets
    sync:                      rsync://rsync.europe.gentoo.org/gentoo-portage
    sync_options:              
    use_manifest:              use
    write_cache:               /var/empty

Repository installed:
    format:                    vdb
    location:                  /var/db/pkg
    builddir:                  /var/tmp/paludis
    names_cache:               /var/db/pkg/.cache/names
    provides_cache:            /var/db/pkg/.cache/provides
    root:                      /
...

Would you be trying to install a virtualbox ebuild? If so yo have to delete that dep in the ebuild and appareo it.

tranquilcool · Post by **tranquilcool** » Fri Feb 27, 2009 6:20 pm

/var/tmp/portage/sys-apps/paludis-0.34.5/work/paludis-0.34.5/paludis/selinux/.libs/libpaludisselinux_0.34.so.34)
make[5]: *** [inquisitio.1] Error 1
make[5]: *** Waiting for unfinished jobs....
mv -f .deps/inquisitio-key_extractor.Tpo .deps/inquisitio-key_extractor.Po
make[5]: Leaving directory `/var/tmp/portage/sys-apps/paludis-0.34.5/work/paludis-0.34.5/src/clients/inquisitio'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/var/tmp/portage/sys-apps/paludis-0.34.5/work/paludis-0.34.5/src/clients/inquisitio'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/var/tmp/portage/sys-apps/paludis-0.34.5/work/paludis-0.34.5/src/clients'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/sys-apps/paludis-0.34.5/work/paludis-0.34.5/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/sys-apps/paludis-0.34.5/work/paludis-0.34.5'
make: *** [all] Error 2
*
* ERROR: sys-apps/paludis-0.34.5 failed.

errors with latest paludis.
any help?

uvok · Post by **uvok** » Sat Feb 28, 2009 12:00 pm

tranquilcool wrote:...
errors with latest paludis.
any help?

Try Paludis 0.36
Furthermore, you can't see the error, try to paste more of the buildlog (maybe to a pastebin)

tranquilcool · Post by **tranquilcool** » Sat Feb 28, 2009 1:53 pm

uvok wrote:
tranquilcool wrote:...
errors with latest paludis.
any help?
Try Paludis 0.36
Furthermore, you can't see the error, try to paste more of the buildlog (maybe to a pastebin)

paludis 0.36 compiles.
thanks!

[PALUDIS] Support thread (current v. 0.30.*) - Part 5

Paludis sets