ATI 3D Hardware acceleration not running [solved]

Message

robselina · Post by **robselina** » Tue Sep 26, 2006 2:59 am

-----------------------------------------
EDIT: I've fixed the AGP/DRI errors in the first xorg log shown, but still having issues. Any help appreciated!
Thanks, Rob
-----------------------------------------

I'm having a hell of a time getting 3D hardware acceleration running. I figure I'm just doing something stupid and I need someone to catch my mistake.

I've read the applicable 'how-to' articles and I think I've followed them correctly:
http://www.gentoo.org/doc/en/ati-faq.xml
http://www.gentoo.org/doc/en/dri-howto.xml

I have an ATI Radeon 9250 on an AMD 1GHz Thunderbird MB of some sort.

My problem in a nutshell:

gentoo rob # glxinfo | grep rendering
direct rendering: No

Here's lspci output:

gentoo rob # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20)
00:09.0 RAID bus controller: Promise Technology, Inc. PDC20571 (FastTrak TX2200) (rev 02)
00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
00:0c.0 USB Controller: NEC Corporation USB (rev 43)
00:0c.1 USB Controller: NEC Corporation USB (rev 43)
00:0c.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)

I have ati-drivers.
I have re-emerged x11-drm after every kernel rebuild.
In my kernel agpgart is compiled into the kernel. I also tried it as a module...no difference.
ATI driver support is enabled as a module.

Here's my xorg.conf

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"

# The module search path. The default path is shown here.

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg

# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbModel" "pc104"
Option "XkbLayout" "us"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
#Not - Auto, ExplorerPS/2, Microsoft, PS/2, MouseSystems, BusMouse
#Failed - SysMouse
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "800"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Avitron-17"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-70

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-160

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

# EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "Radeon-9250"
Driver "radeon"
VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Radeon-9250"
Monitor "Avitron-17"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
Mode 0666
EndSection

/etc/modules.autoload.d/kernel-2.6

# /etc/modules.autoload.d/kernel-2.6: kernel modules to load when system boots.
#
# Note that this file is for 2.6 kernels.
#
# Add the names of modules that you'd like to load when the system
# starts into this file, one per line. Comments begin with # and
# are ignored. Read man modules.autoload for additional details.

# For example:
# aic7xxx
# agpgart
radeon

dmesg

gentoo rob # dmesg
Linux version 2.6.15-gentoo-r1 (root@gentoo) (gcc version 4.1.1 (Gentoo 4.1.1)) #15 PREEMPT Mon Sep 25 20:36:30 GMT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000047ff0000 (usable)
BIOS-e820: 0000000047ff0000 - 0000000047ff8000 (ACPI data)
BIOS-e820: 0000000047ff8000 - 0000000048000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 294896
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 65520 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa8d0
ACPI: RSDT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x47ff0000
ACPI: FADT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x47ff0030
ACPI: DSDT (v001 VIA VT8371 0x00001000 MSFT 0x0100000b) @ 0x00000000
Allocating PCI resources starting at 50000000 (gap: 48000000:b7ff0000)
Built 1 zonelists
Kernel command line: root=/dev/hdb2 psmouse.proto=exps
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01903000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 996.851 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1164952k/1179584k available (2645k kernel code, 13904k reserved, 760k data, 180k init, 262080k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1996.93 BogoMIPS (lpj=3993870)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) Processor stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0800 (from 0e20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-08ff claimed by vt82c586 ACPI
PCI quirk: region 0c00-0c7f claimed by vt82c686 HW-mon
PCI quirk: region 0400-040f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 6000-7fff
MEM window: dfe00000-dfefffff
PREFETCH window: bfc00000-dfcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
audit: initializing netlink socket (disabled)
audit(1159218467.144:1): initialized
highmem bounce pool size: 64 pages
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PCI: Disabling Via external APIC routing
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Thermal Zone [THRM] (30 C)
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at f8816f80. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input1
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
hda: LITE-ON DVD SOHD-16P9SV, ATAPI CD/DVD-ROM drive
hdb: MAXTOR 6L020J1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: COMPAQ CDR-8435, ATAPI CD/DVD-ROM drive
hdd: TSSTcorpCD/DVDW SH-W162Z, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdb: max request size: 128KiB
hdb: 40132503 sectors (20547 MB) w/1819KiB Cache, CHS=39813/16/63, UDMA(66)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 hdb4
hda: ATAPI 48X DVD-ROM drive, 254kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
libata version 1.20 loaded.
sata_promise 0000:00:09.0: version 1.03
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
sata_promise PATA port found
ata1: SATA max UDMA/133 cmd 0xF8818200 ctl 0xF8818238 bmdma 0x0 irq 5
ata2: SATA max UDMA/133 cmd 0xF8818280 ctl 0xF88182B8 bmdma 0x0 irq 5
ata3: PATA max UDMA/133 cmd 0xF8818300 ctl 0xF8818338 bmdma 0x0 irq 5
ata1: dev 0 cfg 49:2f00 82:7c6b 83:5b09 84:4673 85:7c69 86:1a01 87:4663 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 195813072 sectors: LBA
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:407f
ata2: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_promise
ATA: abnormal status 0x8 on port 0xF881831C
ata3: disabling port
scsi2 : sata_promise
Vendor: ATA Model: Maxtor 6B100M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 195813072 512-byte hdwr sectors (100256 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 195813072 512-byte hdwr sectors (100256 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt 0000:00:0c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:0c.2: EHCI Host Controller
ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0c.2: irq 10, io mem 0xdfffee00
ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:0c.0: OHCI Host Controller
ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0c.0: irq 9, io mem 0xdfffc000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:0c.1 -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:0c.1: OHCI Host Controller
ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0c.1: irq 5, io mem 0xdfffd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000b000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:07.3: irq 11, io base 0x0000b400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-2: new low speed USB device using uhci_hcd and address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
hiddev96: USB HID v1.10 Device [APC Back-UPS ES 500 FW:801.e5.D USB FW:e5] on usb-0000:00:07.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
ip_conntrack_pptp version 3.1 loaded
ip_nat_pptp version 3.0 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 180k freed
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[drm] Initialized radeon 1.25.0 20060524 on minor 0:
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 506036k swap on /dev/hdb3. Priority:-1 extents:1 across:506036k
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held, held 0 owner 00000000 f7d31f20
[drm:drm_unlock] *ERROR* Process 5997 using kernel context 0

Any ideas?

Thanks!

Rob

psycepa · Post by **psycepa** » Tue Sep 26, 2006 3:08 am

dunno 'bout acceleration on ati, since i don't have one, but try to look
here: http://forums.gentoo.org/viewtopic-t-37 ... t-ati.html
and here: http://forums.gentoo.org/viewtopic-t-50 ... ight-.html
maby it will help

robselina · Post by **robselina** » Tue Sep 26, 2006 3:23 am

Thanks, looking at those threads now.

here's my xorg log if it helps anyone:

......
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5. for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),

ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon 9250 5960 (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX
[6] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX
[7] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX
[8] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX
[9] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX
[10] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[13] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[14] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[15] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[20] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[21] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[22] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[23] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[24] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[27] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[28] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[29] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[30] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[6] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[7] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[8] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[9] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[10] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[13] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[14] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[15] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[23] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[24] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[25] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[26] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[27] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[28] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[29] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[30] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[31] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[32] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[33] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xdfef0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8

(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 9250 5960 (AGP)" (ChipID = 0x5960)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0xdfec0000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.2.0 and kernel module version 1.25.0
(II) RADEON(0): AGP Fast Write disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(II) RADEON(0): Video RAM override, using 131072 kB instead of 131072 kB
(**) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=16600
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Avitron-17: Using hsync range of 30.00-70.00 kHz
(II) RADEON(0): Avitron-17: Using vrefresh range of 50.00-160.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x960" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x768" (width too large for virtual size)
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) RADEON(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) RADEON(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) RADEON(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) RADEON(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) RADEON(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) RADEON(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) RADEON(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) RADEON(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) RADEON(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) RADEON(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) RADEON(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) RADEON(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) RADEON(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) RADEON(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0

ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[8] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[9] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[10] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[11] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[12] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[14] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[17] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[22] 0 0 0x00007800 - 0x000078ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[26] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[27] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[28] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[29] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[30] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[32] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[33] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[34] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[35] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[36] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit d0000000 0
(**) RADEON(0): Map: 0xd0000000, 0x08000000
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x8217c10)
(**) RADEON(0): Read: 0x0000000c 0x00030065 0x00000000
(**) RADEON(0): Read: rd=12, fd=101, pd=3
(**) RADEON(0): RADEONSaveMode returns 0x8217c10
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf8848000
(II) RADEON(0): [drm] mapped SAREA 0xf8848000 to 0xb7fa0000
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(WW) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
(II) RADEON(0): [agp] You may want to make sure the agpgart kernel module
is loaded before the radeon kernel module.
(**) RADEON(0): RADEONDRICloseScreen
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8848000 at 0xb7fa0000
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x08000000
(**) RADEON(0): agp_size : 0x00000000
(**) RADEON(0): agp_base : 0xb7fc8680
(**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1024x768 94.50 1024 1072 1168 1376 768 769 772 808 (24,32) +H +V
1024x768 94.50 1024 1072 1168 1376 768 769 772 808 (24,32) +H +V
(**) RADEON(0): Pitch = 8388736 bytes (virtualX = 1024, displayWidth = 1024)
(**) RADEON(0): dc=9450, of=37800, fd=168, pd=4
(**) RADEON(0): RADEONInit returns 0x82185c0
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x82185c0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x000200a8 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=168, pd=2
(**) RADEON(0): GRPH_BUFFER_CNTL from 20155c5c to 200d5c5c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration enabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 128
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7417
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provi
ded - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Buttons" "5"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
(**) RADEON(0): RADEONSaveScreen(2)

psycepa · Post by **psycepa** » Tue Sep 26, 2006 3:48 am

do your best

at first sight there is one thing:

Code: Select all

(WW) RADEON(0): [agp] AGP not available 
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.

do you have an agp support in your kernel?

ville.aakko · Post by **ville.aakko** » Tue Sep 26, 2006 6:44 am

Hi,

first, what modules have you loaded? (type lsmod in a console). Make sure you first load (or have compiled in kernel, in your case) your chipset specific *-agp (I have via-agp). Then load module drm and then radeon (or compile them in kernel).

Secondly, you do not need to emerge ati-drivers, unless you want the closed fglrx driver from ATI. If you do want to try both (fgrlx and radeon) you do need compile drm as a module (not in kernel), as fglrx does not need drm (and does not work at all if you have it loaded IIRC).

Thirdly, I have configured my system to work with the opensource 'radeon' driver, but xorg hangs every time I start it. I Googled and believe I have stumbled on this bug:

http://www.mail-archive.com/dri-devel@l ... 28244.html

According to the mailing list, it might actually be a kernel bug with some chipsets, if I've understod correctly. A workaround is to disable AGP (put 'Option "BusType" "PCI"' to xorg.conf). I haven't yet tested if that works.

But do tell us if you get your DRI stuff working, or if you get the same AGP-no-no bug.

ville.aakko · Post by **ville.aakko** » Tue Sep 26, 2006 8:30 am

Now I have tried with Option "BusType" "PCI", and it does not hang anymore!

Also, according to Xorg.0.log, DRI seems to initialise correctly:

Code: Select all

Xorg.0.log:(**) RADEON(0): DRI Finishing init !
Xorg.0.log:(II) RADEON(0): [DRI] installation complete

Of course, without AGP. But, unfortunately I still seem to get no direct rendering:

Code: Select all

$glxinfo 
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
.
.
.

(the output is the same both as a user and root, so it is not a permission issue...)

Hmm, have to look into this later. If anyone has any ideas, please tell me!

BTW., I put the relevant config files and logs in http://www.student.oulu.fi/~villeaak/ge ... n9200-dri/ if someone needs help on configuring or spots some errors I've made

robselina · Post by **robselina** » Wed Sep 27, 2006 12:09 am

Thanks for the input guys, still trying.

I set up a new video card (an ATI Rage 128 we had lying around) in my work machine and DRI works fine with the rage128 driver. Doesn't work with fglrx for whatever reason (probably because I had x11-drm installed based on what Villie says).

Only thing I did differently on that machine was the fact that the kernel already had AGP support and the appropriate AGP chipset support built into the kernel (not modules) so I tried it that way and it worked. I've tried the same here and I don't see any errors anymore about AGP not being available.

Here's the section of the Xorg log:

rob@gentoo ~ $ cat /var/log/Xorg.0.log

X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15-gentoo-r1 i686
Current Operating System: Linux gentoo 2.6.15-gentoo-r1 #21 PREEMPT Tue Sep 26 17:42:43 GMT 2006 i686
Build Date: 01 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 26 17:57:43 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Avitron-17"
(**) | |-->Device "Radeon-9250"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0686 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 0c,05,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 1458,a000 rev 20 class 04,01,00 hdr 00
(II) PCI: 00:09:0: chip 105a,3571 card 105a,3571 rev 02 class 01,04,00 hdr 00
(II) PCI: 00:0a:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1033,0035 card 1033,0035 rev 43 class 0c,03,10 hdr 80
(II) PCI: 00:0c:1: chip 1033,0035 card 1033,0035 rev 43 class 0c,03,10 hdr 00
(II) PCI: 00:0c:2: chip 1033,00e0 card 1838,1074 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:0f:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80
(II) PCI: 00:0f:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 1002,5960 card 174b,0260 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5940 card 174b,0261 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00006000 - 0x00007fff (0x2000) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xbfc00000 - 0xdfcfffff (0x20100000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200 PRO] rev 1, Mem @ 0xd0000000/27, 0xdfef0000/16, I/O @ 0x7800/8, BIOS @ 0xdfec0000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) rev 1, Mem @ 0xc8000000/27, 0xdfee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[1] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[2] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[3] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[4] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[5] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[8] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[9] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[10] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[13] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[14] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[15] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[16] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[17] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[18] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[20] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[21] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[22] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[23] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[1] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[2] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[3] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[4] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[5] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[8] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[9] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[10] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[13] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[14] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[15] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[16] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[17] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[18] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[20] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[21] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[22] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[23] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[6] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[7] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[8] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[9] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[10] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[13] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[14] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[15] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[20] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[21] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[22] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[23] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[24] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[27] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[28] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[29] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[30] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 4.0.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 6.5.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5. for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon 9250 5960 (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[6] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[7] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[8] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[9] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[10] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[13] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[14] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[15] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[20] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[21] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[22] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[23] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[24] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[27] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[28] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[29] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[30] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[6] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[7] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[8] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[9] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[10] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[13] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[14] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[15] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[23] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[24] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[25] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[26] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[27] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[28] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[29] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[30] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[31] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[32] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[33] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xdfef0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 9250 5960 (AGP)" (ChipID = 0x5960)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0xdfec0000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.2.0 and kernel module version 1.25.0
(II) RADEON(0): AGP Fast Write disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(II) RADEON(0): Video RAM override, using 131072 kB instead of 131072 kB
(**) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=16600
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Avitron-17: Using hsync range of 30.00-70.00 kHz
(II) RADEON(0): Avitron-17: Using vrefresh range of 50.00-160.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doubl
escan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x960" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x768" (width too large for virtual size)
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) RADEON(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) RADEON(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) RADEON(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) RADEON(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) RADEON(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) RADEON(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) RADEON(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) RADEON(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) RADEON(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) RADEON(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) RADEON(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) RADEON(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) RADEON(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) RADEON(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdfffee00 - 0xdfffeeff (0x100) MX[B]
[8] -1 0 0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
[9] -1 0 0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
[10] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
[11] -1 0 0xdffc0000 - 0xdffdffff (0x20000) MX[B]
[12] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[14] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[17] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[22] 0 0 0x00007800 - 0x000078ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[26] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[27] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B]
[28] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[29] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[30] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B]
[31] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[B]
[32] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[33] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[34] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[35] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[36] -1 0 0x00007800 - 0x000078ff (0x100) IX[B](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit d0000000 0
(**) RADEON(0): Map: 0xd0000000, 0x08000000
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x8217c10)
(**) RADEON(0): Read: 0x0000000c 0x00030065 0x00000000
(**) RADEON(0): Read: rd=12, fd=101, pd=3
(**) RADEON(0): RADEONSaveMode returns 0x8217c10
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf886e000
(II) RADEON(0): [drm] mapped SAREA 0xf886e000 to 0xb7f2f000
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x0691; Card 0x1002/0x5960]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf674000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb78aa000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf474000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaef94000
(II) RADEON(0): [drm] register handle = 0xdfef0000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x08000000
(**) RADEON(0): agp_size : 0xbfa5c030
(**) RADEON(0): agp_base : 0x400c6459
(**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1024x768 94.50 1024 1072 1168 1376 768 769 772 808 (24,32) +H +V
1024x768 94.50 1024 1072 1168 1376 768 769 772 808 (24,32) +H +V
(**) RADEON(0): Pitch = 8388736 bytes (virtualX = 1024, displayWidth = 1024)
(**) RADEON(0): dc=9450, of=37800, fd=168, pd=4
(**) RADEON(0): RADEONInit returns 0x82185c0
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x82185c0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x000200a8 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=168, pd=2
(**) RADEON(0): GRPH_BUFFER_CNTL from 20205c5c to 200d5c5c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Will use back buffer at offset 0xc00000
(II) RADEON(0): Will use depth buffer at offset 0xf00000
(II) RADEON(0): Will use 112640 kb for textures at offset 0x1200000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 9
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(**) RADEON(0): GRPH_BUFFER_CNTL from 20205c5c to 200d5c5c
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration enabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 128
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7417
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Buttons" "5"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
(**) RADEON(0): RADEONSaveScreen(2)
rob@gentoo ~ $

The AGP issue is gone and DRI starts according to the log, but still:

rob@gentoo ~ $ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
......

Still no Direct Rendering!

Okay, to recap, here's what I've done last round:
1 - rebuilt the kernel with AGPGART and VIA-AGP as part of the kernel, not modules (this got rid of the AGP error above)
2 - re-emerged x11-drm
3 - re-emergex xorg-x11 making sure radeon and fglrx were supported video cards. (I'm still using the radeon driver btw)
4 - have radeon in /etc/modules.autoload.d/kernel-2.6
5 - rebooted the machine, ran "eselect opengl set xorg-x11"
6 - loaded X (log above) still no direct rendering.

robselina · Post by **robselina** » Wed Sep 27, 2006 12:15 am

just a few more things:

1 - if I change the drifer to fglrx and also do "eselect opengl set ati" - it still doesn't work when I restartx
2 - drm and the radeon driver are loading:

gentoo rob # lsmod
Module Size Used by
snd_seq_midi 7072 0
snd_emu10k1_synth 6784 0
snd_emux_synth 35840 1 snd_emu10k1_synth
snd_seq_virmidi 6016 1 snd_emux_synth
snd_seq_midi_emul 6656 1 snd_emux_synth
snd_pcm_oss 49824 0
snd_mixer_oss 17280 1 snd_pcm_oss
snd_seq_dummy 2820 0
snd_seq_oss 32768 0
snd_seq_midi_event 6400 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
snd_seq 50576 9 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_emu10k1 119460 1 snd_emu10k1_synth
snd_rawmidi 21280 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_seq_device 7052 8 snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec 92832 1 snd_emu10k1
snd_pcm 82184 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_timer 21892 3 snd_seq,snd_emu10k1,snd_pcm
snd_ac97_bus 1920 1 snd_ac97_codec
snd_page_alloc 8584 2 snd_emu10k1,snd_pcm
snd_util_mem 3456 2 snd_emux_synth,snd_emu10k1
snd_hwdep 7456 2 snd_emux_synth,snd_emu10k1
snd 46052 13 snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
radeon 117664 1
drm 75160 2 radeon
gentoo rob #

Thanks in advance guys!

ville.aakko · Post by **ville.aakko** » Wed Sep 27, 2006 2:33 pm

I set up a new video card (an ATI Rage 128 we had lying around) in my work machine and DRI works fine with the rage128 driver. Doesn't work with fglrx for whatever reason (probably because I had x11-drm installed based on what Villie says).

I meant the drm kernel module, not x11-drm ebuild. You only need x11-drm if you do not have the DRM kernel module(s) already. You should be able to install it even if using fglrx (just don't load the modules). The only thing that matters is that you need different modules loaded depending on which driver you use.

1 - if I change the drifer to fglrx and also do "eselect opengl set ati" - it still doesn't work when I restartx
2 - drm and the radeon driver are loading:
Code: Select all
gentoo rob # lsmod
Module Size Used by
radeon 117664 1
drm 75160 2 radeon

I believe you used the wrong modules when trying fglrx

. Remove drm and radeon, and modprobe fglrx.

Also, make sure that you use version 2.28.8 of ati-drivers, as newer ones drop support for older Radeons, including 9200 and 9250. ATI has never supported Rage series in linux fglrx AFAIK (I could be wrong). Fglrx works fine here - or, more precisely, as badly as it's supposed to work. That's why I would like to check out the open source radeon driver, but fglrx might just be enough for your use.

Here are the checklists I go through when installing the corresponding driver:

open source ATI radeon:

Code: Select all

- put VIDEO_CARDS="radeon" in make.conf
- emerge xorg-x11 (or emerge -uDNva world)
- eselect opengl set xorg-x11
- compile, install and have kernel modules X-agp, agpgart, drm and radeon loaded
- use driver "radeon" in /etc/X11/xorg.conf

ATI fglrx:

Code: Select all

- have VIDEO_CARDS="fglrx" in make.conf
- emerge xorg-x11 (or emerge -uDNva world)
- eselect opengl set ati
- have kernel modules X-agp, agpgart and fglrx loaded (but no drm or radeon module)
- use driver "fglrx" in /etc/X11/xorg.conf

You need to (re)emerge xorg always when you change your VIDEO_CARDS variable in make.conf. The simplest way is to just run 'emerge -uDNva' world - that's what I do

And of course you can have several drivers in VIDEO_CARDS, I have VIDEO_CARDS="fglrx vesa radeon" (vesa is a backup if I manage to f*k up both fglrx and radeon).

For some reason fglrx also works without chipset specific agp driver (only agpgart) on my system, although I think it shouldn't. And, fglrx also has the internal agpgart, but it doesn't work as well AFAIK, so you might just want to stick with the ones provided by kernel. If you do wan't it for some reason, unload the kernel agp modules (both X-agp and agpgart) and configure fglrx to use it in xorg.conf.

Hope this helps. And hope they get the damn kernel bug fixed. Ah well, I will try to compile AGP in kernel, then I'm going to try with modules from x11-drm (currently I'm using ones that come with gentoo-sources), and then if that doesn't help I guess I'll try if it's been fixed in CVS. If I have time to do all that. Too bad I can't upgrade my kernel (2.6.17).

_pF_ · Post by **_pF_** » Mon Oct 02, 2006 7:42 pm

Well, I'm now trying the cvs build because I had trouble with x11-drm and Beryl [sic]... and now I've the OP's problem - again. Xorg.0.log says that "(II) RADEON(0): Direct rendering enabled", but glxinfo disagrees.

robselina · Post by **robselina** » Tue Oct 03, 2006 3:04 am

I've made little to no progress. I've corrected the fglrx vs radeon module loads, both say DRI is starting, neither throw an error in the xorg log, but glxinfo still says no worky.

ville - what are you saying about the ati-drivers package version? I'm running the only stable branch in the tree, is that the wrong one? ( x11-drivers/ati-drivers-8.27.10-r1) Your version number doesn't seem to match up with mine.....

Wondering if its a hardware issue, I tried using an Nvidia PCI video card but was completely unsuccessufl in that attempt. I think the card is fried (it was in a system that was malfunctioning, it apears to be part of the problem) so I'm back to the ATI card w/o DRI until I get more motivated to troubleshoot this further.....

Rob

_pF_ · Post by **_pF_** » Tue Oct 03, 2006 4:10 am

It's a hardware issue in the respect that you bought an ATI card in the first place - as I foolishly did; never again.

This direct rendering problem is recurring and I think you will eventually solve it. I'm currently investigating the various libraries' paths. An emerge -e world might solve it for you by brute force.

lxnay · Post by **lxnay** » Tue Oct 03, 2006 6:46 am

Unfortunately, if you have ati-drivers or nvidia-drivers installed, the X.Org drivers' DRI won't work. You have to do:

Code: Select all

emerge -C ati-drivers nvidia-drivers
rm -rf /etc/env.d/09ati
env-update && source /etc/profile
eselect opengl set xorg-x11
/etc/init.d/xdm restart

hope this helps

ville.aakko · Post by **ville.aakko** » Tue Oct 03, 2006 2:08 pm

ville - what are you saying about the ati-drivers package version? I'm running the only stable branch in the tree, is that the wrong one? ( x11-drivers/ati-drivers-8.27.10-r1) Your version number doesn't seem to match up with mine.....

Well, I sould say that in case of an external driver not made by Gentoo (ATI fglrx in this cse) you should not look at which version is marked as stable and which one isn't (this is my personal opinion). Just try which one works the best, generally speaking one could assume that the newest one works the best. But you're right in that the 8.27.10-r1 is the last one marked as stable by Gentoo.

Anyways, I have the following in /etc/portage/package.keywords (among a loads of other things:)

Code: Select all

x11-drivers/ati-drivers ~x86
x11-apps/ati-drivers-extra ~x86

In package.mask, I have this to prevent never than 2.8.28 of ati-drivers to be ever installed:

Code: Select all

>x11-drivers/ati-drivers-8.28.8
>x11-apps/ati-drivers-extra-8.28.8

You shouldn't really try a never version, as ATI really DID drop support for anything below (and including) Radeon 9250:

https://support.ati.com/ics/support/def ... olderID=27

I think this sucks, as there has never been a driver made by ATI that would have worked right. On my setup the ATI fglrx leaks as hell and for example UT2004 is unplayable after 10 minutes (I'm not absolutely sure it's fglrx, but I have strong suspicions..). Not to mention the occasional hang when logging out of X (in xdm login screen) and not being able to run another xorg session.

So I hope the Open-source version will have decent DRI performance in the future - it surely didn't have a year ago or so.

It's a hardware issue in the respect that you bought an ATI card in the first place - as I foolishly did; never again.

That is so very very very much true. And neither will I never ever buy anything from ATI again.

Unfortunately, if you have ati-drivers or nvidia-drivers installed, the X.Org drivers' DRI won't work. You have to do:
Code: Select all
emerge -C ati-drivers nvidia-drivers
rm -rf /etc/env.d/09ati
env-update && source /etc/profile
eselect opengl set xorg-x11
/etc/init.d/xdm restart
hope this helps

This is new information for me. I just assumed you can have both (open-source and closed) drivers installed - just need to configure them properly. (and. btw., that's the way it should work, IMO).

Anyways, I will need to try that right away - thanks!

p.s. I put my current config files and logs, which do work with fglrx, in http://www.student.oulu.fi/~villeaak/ge ... ogs.tar.gz - you may check them out freely to see what is different on your setup.

ville.aakko · Post by **ville.aakko** » Tue Oct 03, 2006 2:16 pm

I forgot to mention that in kernel version 2.6.18 ati-drivers doesn't currently emerge properly. You need to patch the source to get it emerged - see bug:

http://bugs.gentoo.org/show_bug.cgi?id=139624

But the kernel version shouldn't matter. I had other reasons to try a never one, and fglrx used to work in at least both 2.6.16 and 2.6.17 for me with the same setup. So do not upgrade to kernel 2.6.18 to "just to try something", the fault is somewhere else

.

Yuka · Post by **Yuka** » Tue Oct 03, 2006 3:25 pm

ville.aakko wrote:I forgot to mention that in kernel version 2.6.18 ati-drivers doesn't currently emerge properly. You need to patch the source to get it emerged - see bug:

http://bugs.gentoo.org/show_bug.cgi?id=139624

But the kernel version shouldn't matter. I had other reasons to try a never one, and fglrx used to work in at least both 2.6.16 and 2.6.17 for me with the same setup. So do not upgrade to kernel 2.6.18 to "just to try something", the fault is somewhere else .

I have kernel 2.6.18, on a X1800XL (R520 i think) PCI-e, AMD64X2 4400 Toledo system and it works fine.

The kernel is not compiled with DRM and has the AGPgart as a module along with the chipset suport.

The only time it got dumb (missconfigure) was when i re-compiled the kernel. The solution to that is to re-emerge the drivers (i use the ati-drivers) so they can be compiled with the new kernel (i dunno why it has to be that way though).

Then run "eselect set opengl ati" and voilá.

Well, the xorg.conf i use is this one:

Code: Select all

Section "ServerLayout"

	Identifier	"Lime"
	#Screen      0	"aticonfig-Screen[0]" 0 0
	Screen	     0	"Screen1" 0 0
	InputDevice	"Mouse0" "CorePointer"
	InputDevice	"Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/75dpi"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "record"
	Load  "xtrap"
	Load  "glx"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "AutoRepeat" "500 30"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "es"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "ImPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier	"Monitor0"
	Option		"VendorName" "Samsung"
	Option	    	"ModelName" "SyncMaster 753v"
	Option	    	"DPMS" "true"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DefaultRefresh"     	# [<bool>]
        #Option     "ModeSetClearScreen" 	# [<bool>]
	# ### generic DRI settings ###
	# === disable PnP Monitor  ===
	#Option                              "NoDDC"
	# === disable/enable XAA/DRI ===
	# ### FireGL DDX driver module specific settings ###
	# === Screen Management ===
	# Note: When OpenGL Overlay is enabled, Video Overlay
	#       will be disabled automatically
	Identifier  "Card0"
	Driver      "fglrx"
	VendorName  "ATI Technologies Inc"
	BoardName   "R520 [Radeon X1800]"
	VideoRam    256
	Option	    "no_accel" "no"
	Option	    "no_dri" "no"
	# === misc DRI settings ===
	Option	    "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
	Option	    "DesktopSetup" "0x00000000"
	Option	    "MonitorLayout" "AUTO, AUTO"
	Option	    "IgnoreEDID" "off"
	Option	    "HSync2" "unspecified"
	Option	    "VRefresh2" "unspecified"
	Option	    "ScreenOverlap" "0"
	# === TV-out Management ===
	Option	    "NoTV" "no"
	Option	    "TVStandard" "NTSC-M"
	Option	    "TVHSizeAdj" "0"
	Option	    "TVVSizeAdj" "0"
	Option	    "TVHPosAdj" "0"
	Option	    "TVVPosAdj" "0"
	Option	    "TVHStartAdj" "0"
	Option	    "TVColorAdj" "0"
	Option	    "GammaCorrectionI" "0x00000000"
	Option	    "GammaCorrectionII" "0x00000000"
	# === OpenGL specific profiles/settings ===
	Option	    "Capabilities" "0x00000000"
	# === Video Overlay for the Xv extension ===
	Option	    "VideoOverlay" "on"
	# === OpenGL Overlay ===
	Option	    "OpenGLOverlay" "off"
	# === Center Mode (Laptops only) ===
	Option	    "CenterMode" "off"
	# === Pseudo Color Visuals (8-bit visuals) ===
	Option	    "PseudoColorVisuals" "off"
	# === QBS Management ===
	Option	    "Stereo" "off"
	Option	    "StereoSyncEnable" "1"
	# === FSAA Management ===
	Option	    "FSAAEnable" "yes"
	Option	    "FSAAScale" "1"
	Option	    "FSAADisableGamma" "no"
	Option	    "FSAACustomizeMSPos" "no"
	Option	    "FSAAMSPosX0" "0.000000"
	Option	    "FSAAMSPosY0" "0.000000"
	Option	    "FSAAMSPosX1" "0.000000"
	Option	    "FSAAMSPosY1" "0.000000"
	Option	    "FSAAMSPosX2" "0.000000"
	Option	    "FSAAMSPosY2" "0.000000"
	Option	    "FSAAMSPosX3" "0.000000"
	Option	    "FSAAMSPosY3" "0.000000"
	Option	    "FSAAMSPosX4" "0.000000"
	Option	    "FSAAMSPosY4" "0.000000"
	Option	    "FSAAMSPosX5" "0.000000"
	Option	    "FSAAMSPosY5" "0.000000"
	# === Misc Options ===
	Option	    "UseFastTLS" "0"
	Option	    "BlockSignalsOnLock" "on"
	Option	    "UseInternalAGPGART" "yes"
	Option	    "ForceGenericCPU" "no"
	BusID       "PCI:5:0:0"
EndSection

Section "Device"
	Identifier  "Card1"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth      24
		Modes      "1024x768"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth      24
		Modes	   "1024x768"
	EndSubSection
EndSection

Section "DRI"
	# Access to OpenGL ICD is allowed for all users:
	# Access to OpenGL ICD is restricted to a specific user group:
    	#Group 100    # users
    	#Mode 0660
	Mode         0666
EndSection

And yes... Unfortunatly Ati has dropped development for older video cards. So anyone with less than a 9600 series card should not upgrade his/hers drivers <=/

Hope it helps =)

ville.aakko · Post by **ville.aakko** » Tue Oct 03, 2006 3:42 pm

I've got the radeon Open-source drivers working too! The key was to remove ati-drivers (along /etc/env.d/09ati). Thanks, lxnay.

The performance with 'radeon' driver is better than it used to be (a year ago or so), but still not enough for UT2004 on a Radeon 9200 (but it is not far from being playable, at 640x480 after putting the world textures at lowest it is ~10fps'ish, which I do not consider playable). I still consider that better than fglrx way better fps with a leak... and, it isn't far from being playable, and with the future Open Source driver version I hope the performance gets better!

I also noticed Xorg hangs at startup if you enable AGPFastWrites. Also, make sure your xorg.conf's Option AGPMode is concurrent with your BIOS setting (that had me confused for a while). Here's my whole xorg.conf for 'radeon' driver: http://www.student.oulu.fi/~villeaak/ge ... n-dri.conf

So, I consider this problem solved - hope the threads starter finds a working setup too!

ville.aakko · Post by **ville.aakko** » Tue Oct 03, 2006 3:57 pm

Yuka wrote:
ville.aakko wrote:I forgot to mention that in kernel version 2.6.18 ati-drivers doesn't currently emerge properly. You need to patch the source to get it emerged - see bug:

http://bugs.gentoo.org/show_bug.cgi?id=139624

But the kernel version shouldn't matter. I had other reasons to try a never one, and fglrx used to work in at least both 2.6.16 and 2.6.17 for me with the same setup. So do not upgrade to kernel 2.6.18 to "just to try something", the fault is somewhere else .
I have kernel 2.6.18, on a X1800XL (R520 i think) PCI-e, AMD64X2 4400 Toledo system and it works fine.

You mean without patchin? I'm quite sure there is the issue with utsrelease.h moving some information to version.h, which is quite easy to patch but hasn't been fixed in portage yet, AFAIK (unless they've just fixed it). This is the error I get without patching the source and with kernel 2.6.18:

Code: Select all

....
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c:233: error: UTS_RELEASE undeclared here (not in a function)
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c:447: warning: initialization from incompatible pointer type
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c: In function firegl_stub_open:
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c:570: warning: assignment discards qualifiers from pointer target type
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c: In function __ke_vm_map:
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c:3175: error: VM_SHM undeclared (first use in this function)
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c:3175: error: (Each undeclared identifier is reported only once
/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.c:3175: error: for each function it appears in.)
make[1]: *** [/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod/firegl_public.o] Virhe 1
make: *** [_module_/var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod] Virhe 2
make: Poistutaan hakemistosta "/usr/src/linux-2.6.18-gentoo"
 * DRM module not built
....

And, here's what I need to do to fix it, (partly from the top of my head, I may have some dirs wrongly):

Code: Select all

rm -R /var/tmp/portage/ati-drivers-8.28.8  # just in case the source is already extracted by 'emerge' to start from a clean table...
ebuild /usr/portage/x11-drivers/ati-drivers/ati-drivers-8.28.8.ebuild unpack
cd /var/tmp/portage/ati-drivers-8.28.8/work/common/lib/modules/fglrx/build_mod
patch < ../../../../../packages/SuSE/kernel-2.6.18.diff
ebuild /usr/portage/x11-drivers/ati-drivers/ati-drivers-8.28.8.ebuild merge

I too had fglrx "working" (with the leak and other issues) under 2.6.18, I only meant that you should get fglrx working hassle-free with a bit older kernel. And hopefully without leaks, maybe that's just with radeon 9200 or something else on my setup.

robselina · Post by **robselina** » Tue Oct 03, 2006 10:58 pm

I wish I could figure out what solved it but I ended up getting fglrx to work last night after a set of updates. I haven't actually tried using 3d acceleration yet (except for glxgears) but I'll give it a shot with enemy territory this evening.

Thanks for all the support guys!

One thing I will say is reading up on this has sold me on nvidia cards from here on out for a linux box. I'm not saying ATI is junk, but support for nvidia seems better from the factory. If you're an ati fan, get a 9600 series or better card or you'll regret it.

Thanks again!

Rob

Yuka · Post by **Yuka** » Wed Oct 04, 2006 2:52 am

robselina wrote:I wish I could figure out what solved it but I ended up getting fglrx to work last night after a set of updates. I haven't actually tried using 3d acceleration yet (except for glxgears) but I'll give it a shot with enemy territory this evening.

Thanks for all the support guys!

One thing I will say is reading up on this has sold me on nvidia cards from here on out for a linux box. I'm not saying ATI is junk, but support for nvidia seems better from the factory. If you're an ati fan, get a 9600 series or better card or you'll regret it.

Thanks again!

Rob

At first, i didn't get it right and i didn't know what to do, so i got angry and upgraded to gcc 4.1.1-r1, then "emerge -eaD system", then world, then gentoo-sources, then make my brand new kernel (2.6.18 with [M] agpgart and no DRM n' the stuff from the ati-wiki) and finally emerged ati-drivers...

To probe it works fine, i emerged quake4 n' it does work fine =P

But it ain't as fast as in Wintendo... I still wonder why...

Well, at least you got it solved =)

Yuka.

robselina · Post by **robselina** » Thu Oct 05, 2006 2:14 am

yea, speed is a little less than I was hoping for, but this is an old machine and I do have a PS2 sitting right next to it so I can't complain much....