2.6.13.1-nitro1 "The Legend Continues" [STATUS: TESTING]

Message

Cinder6 · Post by **Cinder6** » Sun Sep 18, 2005 5:55 am

Dang, el kernel failed to compile. I will mess with it some more tomorrow before I post an error message.

fireball-13 · Post by **fireball-13** » Sun Sep 18, 2005 6:02 am

I have compiled this, but suspend2 is not working

Code: Select all

Sep 18 00:33:28 [kernel] Software Suspend 2.2-rc6: Initiating a software suspend cycle.
Sep 18 00:33:28 [kernel] suspend_userui: userui_program not configured. suspend_userui disabled.
Sep 18 00:33:28 [kernel] Software Suspend 2.2-rc6: Swapwriter: Signature found.
Sep 18 00:33:28 [kernel] Software Suspend 2.2-rc6: Suspending enabled.
Sep 18 00:33:28 [kernel] Freezing processes
Sep 18 00:33:36 [kernel] Stopping tasks failed.
Sep 18 00:33:36 [kernel] Tasks that refused to be refrigerated and haven't since exited:
Sep 18 00:33:36 [kernel]  - ktxnmgrd:hda2:w (#288) signalled and todo list empty.
Sep 18 00:33:36 [kernel]  - ent:hda2. (#289) signalled and todo list empty.
Sep 18 00:33:36 [kernel]  - ktxnmgrd:hda1:t (#940) signalled and todo list empty.
Sep 18 00:33:36 [kernel]  - ent:hda1. (#941) signalled and todo list empty.
Sep 18 00:33:36 [kernel] Please include the following information in bug reports:
Sep 18 00:33:36 [kernel] - SUSPEND core   : 2.2-rc6
Sep 18 00:33:36 [kernel] - Kernel Version : 2.6.13.1-nitro1
Sep 18 00:33:36 [kernel] - Compiler vers. : 3.4
Sep 18 00:33:36 [kernel] - Attempt number : 1
Sep 18 00:33:36 [kernel] - Pageset sizes  : 0 (0 low) and 0 (0 low).
Sep 18 00:33:36 [kernel] - Parameters     : 9 32 0 1 0 5
Sep 18 00:33:36 [kernel] - Calculations   : Image size: 207. Ram to suspend: 2859.
Sep 18 00:33:36 [kernel] - Limits         : 194544 pages RAM. Initial boot: 190473.
Sep 18 00:33:36 [kernel] - Overall expected compression percentage: 0.
Sep 18 00:33:36 [kernel] - Compressor lzf enabled.
Sep 18 00:33:36 [kernel] - Swapwriter active.
Sep 18 00:33:36 [kernel]   Swap available for image: 194786 pages.
Sep 18 00:33:36 [kernel] - Preemptive kernel.
Sep 18 00:33:36 [kernel] - Max extents used: 0
Sep 18 00:33:36 [kernel] - No I/O speed stats available.

CONFIG_SUSPEND2_CRYPTO=y
CONFIG_SUSPEND2=y
# CONFIG_SUSPEND2_FILEWRITER is not set
CONFIG_SUSPEND2_SWAPWRITER=y
CONFIG_SUSPEND2_DEFAULT_RESUME2="/dev/hda4"
# CONFIG_SUSPEND2_KEEP_IMAGE is not set

at that moment I had 500M memory free (768M total) and 760M free swap
Suspend process is starting and after some time it is stoping, but three(four) processes is still running (99% sys cpu) - ent:hda1, ent:hda2 and ktxnmgrd

with 2.6.12-nitro5 suspend2 was working well

kopp · Post by **kopp** » Sun Sep 18, 2005 9:07 am

It compiled and run fine on my system, with reiser4 enabled. Good job! thanks

bob_111 · Post by **bob_111** » Sun Sep 18, 2005 9:21 am

Great work

Is their a reason that these arn't amd64 compatible ? I'd really like to use this kernel!

- bob_111

b3cks · Post by **b3cks** » Sun Sep 18, 2005 10:31 am

Seppe is back and drunken again!

Why you kicked out my logo hack?

I'll test the release maybe tomorrow. Will post a report then.

bollucks · Post by **bollucks** » Sun Sep 18, 2005 10:38 am

Cinder6 wrote:Oh, and I couldn't find the staircase scheduler stuff in the config, but the ck4 patches are supposed to have them.

There is no config option for it. Use a -ck based patchset and you are using the staircase cpu scheduler. Very few patchsets have selectable cpu schedulers.

a13x · Post by **a13x** » Sun Sep 18, 2005 10:39 am

My Reiser4 FS is 1.0.4 ........I didn't have the time to convert it to 1.0.5 but I'd go for it.

seppe · Post by **seppe** » Sun Sep 18, 2005 10:44 am

b3cks wrote:Seppe is back and drunken again!
Why you kicked out my logo hack?

I'll test the release maybe tomorrow. Will post a report then.

I didn't kicked out the logo. I just didn't found a patch for it, but I'll make one for the next release with the files you provided on your webspace.

tagwar · Post by **tagwar** » Sun Sep 18, 2005 11:58 am

just wanted to say thank you! 2.6.13-nitro1 finaly... and it works perfectly.

No problems here with swsusp2 ...

greets Tom

Lenz · Post by **Lenz** » Sun Sep 18, 2005 12:15 pm

seppe wrote:
b3cks wrote:Seppe is back and drunken again!
Why you kicked out my logo hack?

I'll test the release maybe tomorrow. Will post a report then.
I didn't kicked out the logo. I just didn't found a patch for it, but I'll make one for the next release with the files you provided on your webspace.

That would be extremely nice!

Phlogiston · Post by **Phlogiston** » Sun Sep 18, 2005 1:07 pm

a13x wrote:My Reiser4 FS is 1.0.4 ........I didn't have the time to convert it to 1.0.5 but I'd go for it.

Is this necessary? How can I check the version and convert my reiser4 partition?

Thanks in advance...

PS: When I'm back home I need to try out this new beaty

Thanks in advance seppe

andrew_wiggin · Post by **andrew_wiggin** » Sun Sep 18, 2005 1:48 pm

aright, a new nitro
downloading

ok, it works great
even ati-drivers work

a13x · Post by **a13x** » Sun Sep 18, 2005 2:02 pm

Is this necessary? How can I check the version and convert my reiser4 partition?

I think it is necessary .... Minor versions usually fix a few bugs. I had no problems with either 1.0.3 or 1.0.4 but I will convert it to 1.0.5 when I have time.
http://gentoo-wiki.com/HOWTO_Update_reiser4_partitions in case someone is interested.

Lenz · Post by **Lenz** » Sun Sep 18, 2005 2:40 pm

I still have a reiser4 1.0.1 formated disk. The reason is that I didn't find a live-cd with a newer version. Has anybody a link to a live-cd with a more recent version of mkfs.reiser4?

Lenz · Post by **Lenz** » Sun Sep 18, 2005 2:50 pm

2.6.13.2 out, a reason for a new nitro with nitro logo.

b3cks · Post by **b3cks** » Sun Sep 18, 2005 3:00 pm

seppe wrote:
b3cks wrote:Seppe is back and drunken again!
Why you kicked out my logo hack?

I'll test the release maybe tomorrow. Will post a report then.
I didn't kicked out the logo. I just didn't found a patch for it, but I'll make one for the next release with the files you provided on your webspace.

Okay, I forgive you.

a13x · Post by **a13x** » Sun Sep 18, 2005 5:03 pm

I still have a reiser4 1.0.1 formated disk. The reason is that I didn't find a live-cd with a newer version. Has anybody a link to a live-cd with a more recent version of mkfs.reiser4?

Well, there is this earthworm guy that has a minimal livecd (37MB) with Reiser4 1.0.4 tools here: http://www.earthworm.de/download.shtml. You could dl it and use it to convert your Reiser4 to 1.0.4.
The lack of a Reiser4 1.0.5 livecd is keeping me from upgrading my FS. It seems I'll have to make my own livecd (which is time consuming) or wait for someone else to do it.

Indeed there is a great need for 2.6.12-nitro2 because of ck5, linux-2.6.12.2 and the lack of the nitro logo in nitro1.

Cinder6 · Post by **Cinder6** » Sun Sep 18, 2005 5:12 pm

So how do you tell what version of reiser4 you have?

And this version of nitro doesn't work with AMD64???

satanskin · Post by **satanskin** » Sun Sep 18, 2005 7:13 pm

Yeah, what's wrong with this release and AMD64? Are there any problems with it? Will nitro2 fix it?

Anthaus · Post by **Anthaus** » Sun Sep 18, 2005 7:39 pm

Lenz wrote:2.6.13.2 out, a reason for a new nitro with nitro logo.

I used patch-2.6.13.2 instead of patch-2.6.13.1 and after applying the nitro1 patch I only had one warning on the Makefile (nothing serious).
Compiled fine and it's working great now.

SchAmane · Post by **SchAmane** » Sun Sep 18, 2005 8:16 pm

this kernel rocks solid, as always ! Tnx.

m0p · Post by **m0p** » Sun Sep 18, 2005 9:56 pm

m0p wrote:I've got the source unpacked, I'll compile it later. Just wanna know, do all 2.6.13 kernels automaticly mount CD drives in /media, or is that just gvivid/vivid? Cause it is a feature I really don't want. I like mounting by hand, so much better for me.

Anybody?

Zakharov · Post by **Zakharov** » Sun Sep 18, 2005 11:27 pm

I think that's udev stuff, nothing in the kernel, isn't it?

And by the way, the RIP (Recovery Is Possible) Live-CD (which can be found at http://www.tux.org/pub/people/kent-robo ... linux/rip/) has Reiser4 1.0.5 support. I recently used it to convert my partition without even knowing that 1.0.5 introduced some serious changes (well, an world-upgrade can confuse things

), but just to solve the problem that my self-patched grub couldn't read my partition anymore.. =) Worked great! Reiser4 seems to be pretty solid for me, but as always, YMMV

Cinder6 · Post by **Cinder6** » Mon Sep 19, 2005 1:02 am

Working now on AMD64 with reiser4. Just emerging alsa-driver right now

Oh, and it turns out my problem was just that my /boot partition was out of memory, lol.

Hayl · Post by **Hayl** » Mon Sep 19, 2005 2:42 am

I get two memory errors on boot and then everything "works" except Software Suspend 2 is hosed. It will work a little better with suspend2-userui-0.6.1 (I use 0.5.1 with 2.6.12-nitro) but it still won't fully suspend. It gets hung up right before it wants to shut down - last thing it says is something about ACPI state.