Black screen with new ati-drivers, xorg 6.8.2-r1

Message

MasterX · Post by **MasterX** » Tue Mar 08, 2005 6:37 am

The video card is a Mobile X600 with 128MB RAM. This card is supported by the ati-drivers.
I emerged xorg and the new ati-drivers (8.10.19) and I run the fglxconfig. I am also loading the intel-agp and agpgart module, and I am running kernel 2.6.11
When I run startx I get a black screen. I can not find any error in the log file
dmesg, reports a problem with mtrr.

From what I read I have configured the X server so that it does not use the internal agp module. Initially, it was using it, but the same thing.

The notebook came with a 15.4'' widescreen monitor which support 1280x800, but in the xorg.conf file I have 1024x768 and 24 depth. If the black screen issue is fixed, can I go up to 1280x800 resolution?

I do not know the refresh rates of the monitor nor the modlines, but the X server does not complain about them

When I used the radeon driver, and I run startx I got a picture but it was really ugly.

Can someone help me?

yaneurabeya · Post by **yaneurabeya** » Tue Mar 08, 2005 11:51 am

Does your input freeze up, or can you still exit from the invoked startx?

MasterX · Post by **MasterX** » Tue Mar 08, 2005 3:27 pm

yaneurabeya wrote:Does your input freeze up, or can you still exit from the invoked startx?

No, it does not freeze up. I press alt+ctrl+Backspace and I kill the server.
This is something new, people have said on this forum that they had to reboot the system.
No I don't have to do this. If I press alt+ctrl+F* I can switch to other console. The system is responsive, I just have a black screen

MasterX · Post by **MasterX** » Tue Mar 08, 2005 10:34 pm

Here is the Xorg.log You will not find any error message, but there are some warnings which could be usefull

Code: Select all


X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11 i686 [ELF] 
Current Operating System: Linux Socrates 2.6.11 #19 Mon Mar 7 13:33:06 CST 2005 i686
Build Date: 07 March 2005
 Before reporting problems, check http://wiki.X.Org
 to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar  8 10:13:43 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,
/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
 X.Org ANSI C Emulation: 0.2
 X.Org Video Driver: 0.7
 X.Org XInput driver : 0.4
 X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 107b,0460 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2658 card 107b,0460 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 107b,0460 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 107b,0460 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 107b,0460 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 107b,0460 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 107b,0460 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 107b,0460 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 107b,0460 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 107b,0460 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2653 card 107b,0460 rev 04 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 107b,0460 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,3150 card 107b,0460 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:00:0: chip 14e4,1654 card 107b,0460 rev 03 class 02,00,00 hdr 00
(II) PCI: 06:04:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:09:0: chip 104c,8031 card 0000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:09:2: chip 104c,8032 card 107b,0460 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:09:3: chip 104c,8033 card 107b,0460 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:09:4: chip 104c,8034 card 107b,0460 rev 00 class 08,05,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[1] -1	0	0x00003400 - 0x000034ff (0x100) IX[B]
	[2] -1	0	0x00003800 - 0x000038ff (0x100) IX[B]
	[3] -1	0	0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xc8100000 - 0xc81fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 non-prefetchable memory range:
	[0] -1	0	0xc8200000 - 0xc82fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:9:0), (6,7,10), BCTRL: 0x0344 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x3150) rev 0, Mem @ 0xd0000000/27, 0xc8100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xc8218800 - 0xc82188ff (0x100) MX[B]
	[1] -1	0	0xc8218c00 - 0xc8218cff (0x100) MX[B]
	[2] -1	0	0xc8219000 - 0xc82190ff (0x100) MX[B]
	[3] -1	0	0xc8214000 - 0xc8215fff (0x2000) MX[B]
	[4] -1	0	0xc8210000 - 0xc8213fff (0x4000) MX[B]
	[5] -1	0	0xc8218000 - 0xc82187ff (0x800) MX[B]
	[6] -1	0	0xc8216000 - 0xc8216fff (0x1000) MX[B]
	[7] -1	0	0xc8200000 - 0xc820ffff (0x10000) MX[B]
	[8] -1	0	0xc8000c00 - 0xc8000fff (0x400) MX[B]
	[9] -1	0	0xc8000400 - 0xc80004ff (0x100) MX[B]
	[10] -1	0	0xc8000800 - 0xc80009ff (0x200) MX[B]
	[11] -1	0	0xc8000000 - 0xc80003ff (0x400) MX[B]
	[12] -1	0	0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[14] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[15] -1	0	0x000018e0 - 0x000018ef (0x10) IX[B]
	[16] -1	0	0x000018d4 - 0x000018d7 (0x4) IX[B]
	[17] -1	0	0x000018f0 - 0x000018f7 (0x8) IX[B]
	[18] -1	0	0x000018f8 - 0x000018fb (0x4) IX[B]
	[19] -1	0	0x00002080 - 0x00002087 (0x8) IX[B]
	[20] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[21] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[22] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[23] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[24] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[25] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[26] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[27] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[28] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[29] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xc8218800 - 0xc82188ff (0x100) MX[B]
	[1] -1	0	0xc8218c00 - 0xc8218cff (0x100) MX[B]
	[2] -1	0	0xc8219000 - 0xc82190ff (0x100) MX[B]
	[3] -1	0	0xc8214000 - 0xc8215fff (0x2000) MX[B]
	[4] -1	0	0xc8210000 - 0xc8213fff (0x4000) MX[B]
	[5] -1	0	0xc8218000 - 0xc82187ff (0x800) MX[B]
	[6] -1	0	0xc8216000 - 0xc8216fff (0x1000) MX[B]
	[7] -1	0	0xc8200000 - 0xc820ffff (0x10000) MX[B]
	[8] -1	0	0xc8000c00 - 0xc8000fff (0x400) MX[B]
	[9] -1	0	0xc8000400 - 0xc80004ff (0x100) MX[B]
	[10] -1	0	0xc8000800 - 0xc80009ff (0x200) MX[B]
	[11] -1	0	0xc8000000 - 0xc80003ff (0x400) MX[B]
	[12] -1	0	0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[14] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[15] -1	0	0x000018e0 - 0x000018ef (0x10) IX[B]
	[16] -1	0	0x000018d4 - 0x000018d7 (0x4) IX[B]
	[17] -1	0	0x000018f0 - 0x000018f7 (0x8) IX[B]
	[18] -1	0	0x000018f8 - 0x000018fb (0x4) IX[B]
	[19] -1	0	0x00002080 - 0x00002087 (0x8) IX[B]
	[20] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[21] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[22] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[23] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[24] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[25] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[26] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[27] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[28] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[29] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xc8218800 - 0xc82188ff (0x100) MX[B]
	[6] -1	0	0xc8218c00 - 0xc8218cff (0x100) MX[B]
	[7] -1	0	0xc8219000 - 0xc82190ff (0x100) MX[B]
	[8] -1	0	0xc8214000 - 0xc8215fff (0x2000) MX[B]
	[9] -1	0	0xc8210000 - 0xc8213fff (0x4000) MX[B]
	[10] -1	0	0xc8218000 - 0xc82187ff (0x800) MX[B]
	[11] -1	0	0xc8216000 - 0xc8216fff (0x1000) MX[B]
	[12] -1	0	0xc8200000 - 0xc820ffff (0x10000) MX[B]
	[13] -1	0	0xc8000c00 - 0xc8000fff (0x400) MX[B]
	[14] -1	0	0xc8000400 - 0xc80004ff (0x100) MX[B]
	[15] -1	0	0xc8000800 - 0xc80009ff (0x200) MX[B]
	[16] -1	0	0xc8000000 - 0xc80003ff (0x400) MX[B]
	[17] -1	0	0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
	[18] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[22] -1	0	0x000018e0 - 0x000018ef (0x10) IX[B]
	[23] -1	0	0x000018d4 - 0x000018d7 (0x4) IX[B]
	[24] -1	0	0x000018f0 - 0x000018f7 (0x8) IX[B]
	[25] -1	0	0x000018f8 - 0x000018fb (0x4) IX[B]
	[26] -1	0	0x00002080 - 0x00002087 (0x8) IX[B]
	[27] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[28] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[29] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[30] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[31] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[32] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[33] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[34] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[35] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[36] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.99.902, module version = 8.10.19
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
	RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
	RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
	MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
	FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
	RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
	RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
	RADEON 9600 PRO (RV360 4152),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
	RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
	RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
	RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
	RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64),
	MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
	RADEON X600 (RV380 3E50), FireGL V3200* (RV380 3E54),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
	MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
	RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
	RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
	FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	MOBILITY RADEON X800 XT (M28 5D48),
	MOBILITY FireGL V5100* (M28 5D49), FireGL V5000 (RV410 5E48),
	RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
	RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
	RADEON X700 (RV410 5E4F), RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(--) Chipset MOBILITY RADEON X600 (M24 3150) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xc8218800 - 0xc82188ff (0x100) MX[B]
	[6] -1	0	0xc8218c00 - 0xc8218cff (0x100) MX[B]
	[7] -1	0	0xc8219000 - 0xc82190ff (0x100) MX[B]
	[8] -1	0	0xc8214000 - 0xc8215fff (0x2000) MX[B]
	[9] -1	0	0xc8210000 - 0xc8213fff (0x4000) MX[B]
	[10] -1	0	0xc8218000 - 0xc82187ff (0x800) MX[B]
	[11] -1	0	0xc8216000 - 0xc8216fff (0x1000) MX[B]
	[12] -1	0	0xc8200000 - 0xc820ffff (0x10000) MX[B]
	[13] -1	0	0xc8000c00 - 0xc8000fff (0x400) MX[B]
	[14] -1	0	0xc8000400 - 0xc80004ff (0x100) MX[B]
	[15] -1	0	0xc8000800 - 0xc80009ff (0x200) MX[B]
	[16] -1	0	0xc8000000 - 0xc80003ff (0x400) MX[B]
	[17] -1	0	0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
	[18] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[22] -1	0	0x000018e0 - 0x000018ef (0x10) IX[B]
	[23] -1	0	0x000018d4 - 0x000018d7 (0x4) IX[B]
	[24] -1	0	0x000018f0 - 0x000018f7 (0x8) IX[B]
	[25] -1	0	0x000018f8 - 0x000018fb (0x4) IX[B]
	[26] -1	0	0x00002080 - 0x00002087 (0x8) IX[B]
	[27] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[28] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[29] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[30] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[31] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[32] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[33] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[34] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[35] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[36] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x82aec98
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xc8218800 - 0xc82188ff (0x100) MX[B]
	[6] -1	0	0xc8218c00 - 0xc8218cff (0x100) MX[B]
	[7] -1	0	0xc8219000 - 0xc82190ff (0x100) MX[B]
	[8] -1	0	0xc8214000 - 0xc8215fff (0x2000) MX[B]
	[9] -1	0	0xc8210000 - 0xc8213fff (0x4000) MX[B]
	[10] -1	0	0xc8218000 - 0xc82187ff (0x800) MX[B]
	[11] -1	0	0xc8216000 - 0xc8216fff (0x1000) MX[B]
	[12] -1	0	0xc8200000 - 0xc820ffff (0x10000) MX[B]
	[13] -1	0	0xc8000c00 - 0xc8000fff (0x400) MX[B]
	[14] -1	0	0xc8000400 - 0xc80004ff (0x100) MX[B]
	[15] -1	0	0xc8000800 - 0xc80009ff (0x200) MX[B]
	[16] -1	0	0xc8000000 - 0xc80003ff (0x400) MX[B]
	[17] -1	0	0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
	[18] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[24] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[25] -1	0	0x000018e0 - 0x000018ef (0x10) IX[B]
	[26] -1	0	0x000018d4 - 0x000018d7 (0x4) IX[B]
	[27] -1	0	0x000018f0 - 0x000018f7 (0x8) IX[B]
	[28] -1	0	0x000018f8 - 0x000018fb (0x4) IX[B]
	[29] -1	0	0x00002080 - 0x00002087 (0x8) IX[B]
	[30] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[31] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[32] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[33] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[34] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[35] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[36] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[37] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[38] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[39] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[40] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[41] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(II) fglrx(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000100"
(**) fglrx(0): Option "MonitorLayout" "AUTO, NONE"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "on"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "no"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "MOBILITY RADEON X600 (M24 3150)" (Chipset = 0x3150)
(--) fglrx(0): (PciSubVendor = 0x107b, PciSubDevice = 0x0460)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xc8100000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x03
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS -------- 
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option: 
	Monitor1--Type AUTO, Monitor2--Type NONE

(II) fglrx(0): Primary head:
 Monitor   -- NONE
 Connector -- None
 DAC Type  -- Unknown
 TMDS Type -- NONE
 DDC Type  -- NONE
(II) fglrx(0): Secondary head:
 Monitor   -- NONE
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): 
(WW) fglrx(0): Only single display is connected, DesktopOption will be ignored
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is enabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Monitor0: Using hsync range of 31.50-68.70 kHz
(II) fglrx(0): Monitor0: Using vrefresh range of 20.00-60.00 Hz
(II) fglrx(0): Clock range:  20.00 to 400.00 MHz
(II) fglrx(0): Not using default mode "640x350" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x400" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "720x400" (vrefresh out of range)
(II) fglrx(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x480" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x480" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x480" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (vrefresh out of range)
(II) fglrx(0): Not using default mode "400x300" (vrefresh out of range)
(II) fglrx(0): Not using default mode "800x600" (vrefresh out of range)
(II) fglrx(0): Not using default mode "400x300" (vrefresh out of range)
(II) fglrx(0): Not using default mode "800x600" (vrefresh out of range)
(II) fglrx(0): Not using default mode "400x300" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "512x384" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "512x384" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "512x384" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "512x384" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1152x864" (vrefresh out of range)
(II) fglrx(0): Not using default mode "576x432" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1280x960" (hsync out of range)
(II) fglrx(0): Not using default mode "640x480" (hsync out of range)
(II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "640x512" (hsync out of range)
(II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "640x512" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "832x624" (vrefresh out of range)
(II) fglrx(0): Not using default mode "416x312" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
(II) fglrx(0): Not using default mode "700x525" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync
(**) fglrx(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) fglrx(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) fglrx(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) fglrx(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) fglrx(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) fglrx(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) fglrx(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) fglrx(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) fglrx(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) fglrx(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) fglrx(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) fglrx(0): *Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) fglrx(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) fglrx(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) fglrx(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) fglrx(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.99.902, module version = 8.10.19
	ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x000007cb
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xc8100000 - 0xc810ffff (0x10000) MX[B]
	[1] 0	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xc8218800 - 0xc82188ff (0x100) MX[B]
	[8] -1	0	0xc8218c00 - 0xc8218cff (0x100) MX[B]
	[9] -1	0	0xc8219000 - 0xc82190ff (0x100) MX[B]
	[10] -1	0	0xc8214000 - 0xc8215fff (0x2000) MX[B]
	[11] -1	0	0xc8210000 - 0xc8213fff (0x4000) MX[B]
	[12] -1	0	0xc8218000 - 0xc82187ff (0x800) MX[B]
	[13] -1	0	0xc8216000 - 0xc8216fff (0x1000) MX[B]
	[14] -1	0	0xc8200000 - 0xc820ffff (0x10000) MX[B]
	[15] -1	0	0xc8000c00 - 0xc8000fff (0x400) MX[B]
	[16] -1	0	0xc8000400 - 0xc80004ff (0x100) MX[B]
	[17] -1	0	0xc8000800 - 0xc80009ff (0x200) MX[B]
	[18] -1	0	0xc8000000 - 0xc80003ff (0x400) MX[B]
	[19] -1	0	0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
	[20] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[21] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[22] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[23] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[24] 0	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[25] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[26] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[27] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[28] -1	0	0x000018e0 - 0x000018ef (0x10) IX[B]
	[29] -1	0	0x000018d4 - 0x000018d7 (0x4) IX[B]
	[30] -1	0	0x000018f0 - 0x000018f7 (0x8) IX[B]
	[31] -1	0	0x000018f8 - 0x000018fb (0x4) IX[B]
	[32] -1	0	0x00002080 - 0x00002087 (0x8) IX[B]
	[33] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[34] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[35] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[36] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[37] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[38] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[39] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[40] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[41] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[42] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[43] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[44] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(WW) fglrx(0): Cannot read colourmap from VGA.  Will restore with default
(II) fglrx(0): UMM area:     0xd07ad000 (size=0x07843000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe1151000
(II) fglrx(0): [drm] mapped SAREA 0xe1151000 to 0xb7cd9000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.10.19
(II) fglrx(0):     Date: Feb  9 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.11
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xc8100000
(II) fglrx(0): [drm] ATIGART Table handle = 0xd7ff0000
(II) fglrx(0): [pcie] 65536 kB allocated with handle 0x00000000
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(WW) fglrx(0): [drm] using DRM defaults (QS_ID=9650ffff)
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe9571000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x007ad000
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,1429)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1056)
(II) fglrx(0): Largest offscreen area available: 1408 x 365
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		22 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1 
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard1: XkbRules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataRepor

MasterX · Post by **MasterX** » Wed Mar 09, 2005 3:11 am

I used the gtf program to file in informations for the Modeline
I added only two resolution 1280X800 and 1204X768. Both of them are supported by my monitor, but in the log I read that 1280X800 is not used because the width is too large for virtual screen!!! What is this?

In the xorg.conf file I have
Option "MonitorLayout" "AUTO,NONE"
Option "HSync2" "unspecified"
Option VRefresh2" "unspecified:

Could this be the problem? What should I put there?

MasterX · Post by **MasterX** » Wed Mar 09, 2005 5:01 am

When I was running startx, I was getting the next error in the dmesg
mtrr: base(0xd0000000) is not aligned on a size(0x7ff0000) boundary
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)

I disabled mtrr support in the kernel, I set
Option "mtrr" "off" in xorg.conf
and the message in dmesg is gone.
Still, I am getting a black screen
Could it be that X600 is PCI express video card? But, then again I am running 2.6.11 kernel which has suport for this kind of PCI cards.

Lokheed · Post by **Lokheed** » Wed Mar 09, 2005 7:04 am

Try setting this to "no" in your xorg.conf

Code: Select all

Option "UseInternalAGPGART"         "yes"

MasterX · Post by **MasterX** » Wed Mar 09, 2005 3:24 pm

Lokheed wrote:Try setting this to "no" in your xorg.conf
Code: Select all
Option "UseInternalAGPGART"         "yes"

Thank you for participating
I tried this it did not work. What surprises me is that everybody who gets a black screen, his/her system alse hangs and has to reboot it. I do not have this.

Is it possible to get more debug output from X. Anything that will tell me what is X doing when I get the black screen

MasterX · Post by **MasterX** » Thu Mar 10, 2005 6:20 am

255 people have read my post and only two said something!

If I am reporting a problem that has already being solved, I apologize and I kindly request for the link.
I do not know what else to do to track down the problem.
I am thinking of using an external monitor, just to check if there is a problem with the monitor or with the driver.

MasterX · Post by **MasterX** » Thu Mar 10, 2005 6:51 am

OK, I have a usefull information

I plugged an external monitor and I changed the Option "MonitorLayout" "AUTO, NONE" to "CRT, CRT"

When I run startx, I saw the image on the external monitor!!
Also, I had connected the computer to the TV, through the s-video output, and again I saw the image on the TV.

So, I need to give the correct argument to the MonitorLayout option.
What should I put there? I tried "AUTO, AUTO", but it did not work

MasterX · Post by **MasterX** » Thu Mar 10, 2005 7:03 am

I did some Googling, and I found the LVDS option.
I used it and it worked.
What is LVDS and TMDS?

On the Google I found the following:

Code: Select all

(II) RADEON(0): Primary:
 Monitor   -- LVDS
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- None
 DAC Type  -- Unknown
 TMDS Type -- NONE
 DDC Type  -- NONE

But I have

Code: Select all

(II) fglrx(0): Primary head:
 Monitor   -- LVDS
 Connector -- None
 DAC Type  -- Unknown
 TMDS Type -- NONE
 DDC Type  -- Nonw
(II) fglrx(0): Secondary head:
 Monitor   -- NONE
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC

Couple of lines below it says

Code: Select all

(II) fglrx(0): Panel ID string: CRT     <--------Why CRT ???
(II) fglrx(0): Panel size from BIOS: 1280x800

I am doing something wrong! Can you tell me what that is?[/code]

NetHawl · Post by **NetHawl** » Thu Mar 10, 2005 4:49 pm

HI,
I´ve got an idea, dont know if you tried it already...but:
try to change this in your xorg.conf:

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

to:-----------------------------------------------------------------------------------------------

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

......If this doesnt work, try to startx in 1280x1024 or 1280x960 resolution....mavbe its one of those problems.

------Good Luck

MasterX · Post by **MasterX** » Thu Mar 10, 2005 6:10 pm

Thank you for your suggestion and I will try it, although the keyboard works fine (I think so, I have not tested it alot ).
The maximum resolution that I can go is 1280x800 (is a widescreen monitor)

And I was able to make it work by making the changes that I have in my previous post.

The problem is that I am seeing something in the Xorg.log about the two heads that troubles me.

MasterX · Post by **MasterX** » Fri Mar 11, 2005 4:01 am

What is the story with RANDR and fglrs.
In Xorg.log I read that RANDR is enabled, by when I use KDE to change the resolution it says that RANDR is not supported and I need to install a newer version of X!

Is there a solution for this problem?

Edit: Disable DGA

MasterX · Post by **MasterX** » Sat Mar 12, 2005 8:01 pm

OK, I have one last problem:
When I set the MonitorLayout to "LVDS,AUTO" I have a picture on my laptops monitor and on the external monitor. If instead of the external monitor I connect the TV (through s-video) there is no picture. In order to fix this, I need to change the MonitorLayout to "AUTO,AUTO", where I do not have a picture on the laptop, but I have on the external monitor and of course the TV. Still, the picture that I have on the TV is flickering.

Does anybody know how can I fix this?

Here is my xorg.conf file, which was created with flgrxconfig

Code: Select all

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga" 
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "/usr/share/fonts/sharefonts/"
    FontPath   "/usr/share/fonts/corefonts/"
    FontPath   "/usr/share/fonts/freefont/"
    FontPath   "/usr/share/fonts/ttf-bitstream-vera/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc101"
    Option "XkbLayout"	"us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping"  "4 5"
    Option "Device"  "/dev/input/mouse1"
EndSection

Section "InputDevice"

# Identifier and driver
    
    Identifier	"Mouse1"
    Driver "synaptics"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   30 - 90
    VertRefresh 60
    Option "DPMS"
    UseModes  "MyModes"

EndSection

Section "Modes"
    Identifier  "MyModes"
    Modeline "1280x800_60.00"  83.46  1280 1344 1480 1680 800 801 804 828  -HSync +VSync
    Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344 768 769 772 795  -HSync +VSync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present


# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000100" 
    Option "MonitorLayout"              "LVDS,AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "no"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "on"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=3150
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x800" "1024x768"
#        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    InputDevice "Mouse0" "AlwaysCore"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

chaoslord007 · Post by **chaoslord007** » Tue Mar 22, 2005 5:27 pm

Hi,
I had the same problem and tried many solutions from the web. The one that fixed my problem was related to LVDS.

Background:
X uses DDC (seems to be a sort of monitor plug-and-play) to discover your monitor.
The section 'MonitorLayout "Auto,None" ' or Auto,Auto generated by fglrxconfig are related to that. Auto means that it will try a DDC discover.
Now the trick, the xorg project radeon driver worked for me and while diff'ing the log's I saw that the working radeon driver detected the monitor type "LVDS" while the fglrx driver brought up some errors.

Solution:
After adding "LVDS,NONE" instead of "AUTO,NONE" as MonitorLayout it works

Info:
Option "NoDDC" "true" you find in the internet seems not to help in my case

Configuration
my xorg.conf for a Dell inspiron 9300 with an 128 MB X300 (working)
[code]# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font module
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "GLcore"
Load "glx"
# This loads the DRI module
Load "dri"

Load "synaptics"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "dell101"
Option "XkbLayout" "de"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/input/mice"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

Driver "synaptics"
Identifier "Touchpad"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.2"
Option "MaxSpeed" "0.5"
Option "AccelFactor" "0.01"
Option "EdgeMotionMinSpeed" "15"
Option "EdgeMotionMaxSpeed" "15"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Builtin Panel"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5-110.0

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 28-90
Option "DPMS"

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "X300Ati"
Driver "fglrx"

Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off"
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "LVDS, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"

Option "NoTV" "yes"
Option "TVStandart" "PAL-G"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"

Option "Capabilities" "0x00008000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"

Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"

Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"

Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"

Option "KernelModuleParm" "agplock=0"

BusID "PCI:1:0:0"
Screen 0

#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection

Section "Device"
Identifier "X300Xorg"
Driver "radeon"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "ScreenAti"
Device "X300Ati"
Monitor "Builtin Panel"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1920x1200 1680x1050 1440x900 1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1920x1200 1680x1050 1440x900 1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1920x1200 1680x1050 1440x900 1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection

Section "Screen"
Identifier "ScreenXorg"
Device "X300Xorg"
Monitor "Builtin Panel"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1920x1200 1680x1050 1440x900 1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1920x1200 1680x1050 1440x900 1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1920x1200 1680x1050 1440x900 1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"
# The Identifier line must be present
Identifier "AtiLayout"

Screen "ScreenAti"

InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "ServerLayout"
# The Identifier line must be present
Identifier "XorgLayout"

Screen "ScreenXorg"

InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "DRI"
Mode 0666
EndSection
[/code]

As reference the both old log's leading me to this solution
Working log with Xorg Radeon configuration (missing the fglrx accelleration)
[code]
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r4 i686 [ELF]
Current Operating System: Linux naarzaparillo 2.6.10-gentoo-r6 #2 Mon Mar 21 21:01:00 GMT 2005 i686
Build Date: 20 March 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 21 21:20:44 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Layout"
(**) |-->Screen "Screen Xorg" (0)
(**) | |-->Monitor "Builtin Panel"
(**) | |-->Device "X300Xorg"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,0189 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,0189 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,0189 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,0189 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,0189 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,0189 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1028,0189 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 14f1,5423 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,0189 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1028,0189 rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1028,0189 rev 03 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5460 card 1028,2002 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,0189 rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0476 card 4000,0000 rev b3 class 06,07,00 hdr 82
(II) PCI: 03:01:1: chip 1180,0552 card 1028,0189 rev 08 class 0c,00,10 hdr 80
(II) PCI: 03:01:2: chip 1180,0822 card 1028,0189 rev 17 class 08,05,01 hdr 80
(II) PCI: 03:03:0: chip 8086,4220 card 8086,2722 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5460) rev 0, Mem @ 0xd0000000/27, 0xdfdf0000/16, I/O @ 0xde00/8, BIOS @ 0xdfe00000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[1] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[2] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[3] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[13] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[17] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[18] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[19] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[20] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[21] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[22] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[24] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[1] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[2] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[3] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[13] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[17] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[18] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[19] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[20] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[21] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[22] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[24] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[6] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[7] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[8] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[9] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[10] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[13] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[18] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[20] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[24] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[25] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[26] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[29] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[30] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[31] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "radeon"
(II) Loading /usr/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/modules/input/synaptics_drv.o
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility M300 (M22) 5460 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[6] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[7] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[8] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[9] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[10] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[13] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[18] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[20] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[24] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[25] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[26] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[29] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[30] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[31] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[6] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[7] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[8] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[9] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[10] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[13] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[21] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[23] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[24] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[27] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[28] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[29] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[30] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[31] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[32] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[33] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[34] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xdfdf0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility M300 (M22) 5460 (PCIE)" (ChipID = 0x5460)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0xdfe00000
(--) RADEON(0): VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): PCI card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): LVDS port is not in connector table, added in.
(II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- LVDS
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- Proprietary
DAC Type -- TVDAC/ExtDAC
TMDS Type -- NONE
DDC Type -- NONE
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=22950
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: J9962171WU1

(II) RADEON(0): Panel Size from BIOS: 1920x1200
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1920x1200 1680x1050 1440x900 1600x1200
(II) RADEON(0): Valid mode using on-chip RMX: 1280x1024
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Total number of valid FP mode(s) found: 4
(--) RADEON(0): Virtual size is 1920x1200 (pitch 1920)
(**) RADEON(0): *Mode "1920x1200 1680x1050 1440x900 1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1920x1200 1680x1050 1440x900 1600x1200" 162.00 1920 1968 2000 2160 1200 1201 1204 1250
(**) RADEON(0): *Mode "1280x1024": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024" 162.00 1280 1968 2000 2160 1024 1201 1204 1250
(**) RADEON(0): *Mode "1024x768": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 162.00 1024 1968 2000 2160 768 1201 1204 1250
(**) RADEON(0): *Mode "800x600": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600" 162.00 800 1968 2000 2160 600 1201 1204 1250
(**) RADEON(0): Default mode "640x350": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x350" 162.00 640 1968 2000 2160 350 1201 1204 1250
(**) RADEON(0): Default mode "640x400": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x400" 162.00 640 1968 2000 2160 400 1201 1204 1250
(**) RADEON(0): Default mode "720x400": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "720x400" 162.00 720 1968 2000 2160 400 1201 1204 1250
(**) RADEON(0): Default mode "640x480": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 162.00 640 1968 2000 2160 480 1201 1204 1250
(**) RADEON(0): Default mode "1152x864": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x864" 162.00 1152 1968 2000 2160 864 1201 1204 1250
(**) RADEON(0): Default mode "1280x960": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960" 162.00 1280 1968 2000 2160 960 1201 1204 1250
(**) RADEON(0): Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1600x1200" 162.00 1600 1968 2000 2160 1200 1201 1204 1250
(**) RADEON(0): Default mode "832x624": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "832x624" 162.00 832 1968 2000 2160 624 1201 1204 1250
(**) RADEON(0): Default mode "1152x768": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x768" 162.00 1152 1968 2000 2160 768 1201 1204 1250
(**) RADEON(0): Default mode "1400x1050": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1400x1050" 162.00 1400 1968 2000 2160 1050 1201 1204 1250
(**) RADEON(0): Default mode "1600x1024": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1600x1024" 162.00 1600 1968 2000 2160 1024 1201 1204 1250
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[8] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[9] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[10] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[11] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[12] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[13] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[14] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[15] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[20] 0 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[24] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[25] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[26] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[29] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[30] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[31] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[32] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[33] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[34] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[35] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[36] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[37] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) RADEON(0): Failed to set up write-combining range (0xd0000000,0x8000000)
(II) RADEON(0): Dynamic Clock Scaling Disabled
(II) RADEON(0): BIOS HotKeys Disabled
(WW) RADEON(0): Direct rendering not yet supported on Radeon 9500 and newer cards
(II) RADEON(0): Memory manager initialized to (0,0) (1920,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1920,1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6989
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6986
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "PS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "PS/2"
(**) Option "SendCoreEvents"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "5"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(II) Synaptics touchpad driver version 0.14.0
(--) Touchpad auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(**) Option "LeftEdge" "120"
(**) Option "RightEdge" "830"
(**) Option "TopEdge" "120"
(**) Option "BottomEdge" "650"
(**) Option "FingerLow" "14"
(**) Option "FingerHigh" "15"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "110"
(**) Option "EmulateMidButtonTime" "75"
(**) Option "VertScrollDelta" "20"
(**) Option "HorizScrollDelta" "20"
(**) Option "EdgeMotionMinSpeed" "15"
(**) Option "EdgeMotionMaxSpeed" "15"
(**) Option "UpDownScrolling" "1"
(**) Option "CircularScrolling" "1"
(**) Option "CircScrollTrigger" "2"
(--) Touchpad touchpad found
(**) Option "CorePointer"
(**) Touchpad: Core Pointer
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "dell101"
(**) Keyboard1: XkbModel: "dell101"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Mouse1: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Touchpad touchpad found
Could not init font path element /usr/share/fonts/local/, removing from list!
SynapticsCtrl called.
SetClientVersion: 0 8
[/code]

And the Log that causes the black screen with fglrx driver
[code]
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r4 i686 [ELF]
Current Operating System: Linux naarzaparillo 2.6.10-gentoo-r6 #2 Mon Mar 21 21:01:00 GMT 2005 i686
Build Date: 20 March 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 22 17:32:55 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "AtiLayout"
(**) |-->Screen "ScreenAti" (0)
(**) | |-->Monitor "Builtin Panel"
(**) | |-->Device "X300Ati"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,0189 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,0189 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,0189 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,0189 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,0189 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,0189 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1028,0189 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 14f1,5423 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,0189 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1028,0189 rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1028,0189 rev 03 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5460 card 1028,2002 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,0189 rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0476 card 4000,0000 rev b3 class 06,07,00 hdr 82
(II) PCI: 03:01:1: chip 1180,0552 card 1028,0189 rev 08 class 0c,00,10 hdr 80
(II) PCI: 03:01:2: chip 1180,0822 card 1028,0189 rev 17 class 08,05,01 hdr 80
(II) PCI: 03:03:0: chip 8086,4220 card 8086,2722 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5460) rev 0, Mem @ 0xd0000000/27, 0xdfdf0000/16, I/O @ 0xde00/8, BIOS @ 0xdfe00000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[1] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[2] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[3] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[13] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[17] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[18] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[19] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[20] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[21] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[22] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[24] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[1] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[2] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[3] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[13] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[17] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[18] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[19] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[20] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[21] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[22] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[24] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[6] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[7] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[8] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[9] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[10] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[13] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) M

foosh · Post by **foosh** » Fri Mar 25, 2005 7:54 am

yaneurabeya wrote:Does your input freeze up, or can you still exit from the invoked startx? No, it does not freeze up. I press alt+ctrl+Backspace and I kill the server.

Really? Any chance you could point me to those posts?? I have been searching for hours.
Mine goes black but is then unresponsive to ctl-alt-backspace.

In fact, I am able to run X fine the first time I do. But if I run Xfce, then exit to the console, then run KDE, for example, the second time it will always hang up in some way. Even if it's just startx'ing to xfce, exiting to console, then startx'ing xfce again.

ANY ideas will be much appreciated.

foosh · Post by **foosh** » Sat Mar 26, 2005 2:19 am

...and chaoslord. PLEASE get rid of the commented and otherwise irrelevant sections of a cfg file when you post it!!!!!!!!!!!!!!

yaneurabeya · Post by **yaneurabeya** » Sat Mar 26, 2005 6:05 am

foosh wrote:...and chaoslord. PLEASE get rid of the commented and otherwise irrelevant sections of a cfg file when you post it!!!!!!!!!!!!!!

Yes, please. Snippets would be nice and removing all sections devoid the beginning, (EE), and (WW) sections would be nice from your Xorg log.

For the Xorg issues thread, the one I was posting on was sort of closed but there is another one for random Xorg errors. I'll give you the one I had because the moderator referenced the other thread at the end of that one.

http://forums.gentoo.org/viewtopic-t-215629.html

MasterX · Post by **MasterX** » Mon Mar 28, 2005 1:22 pm

foosh,
from what I have read, if X hangs it hangs because of the ATI drivers. I was not able to find a solution for this. Just in case, have you enable/disable the use of InternalAGP (you can do that in Xorg.conf file)?

chaoslord007,
if you set MonitorLayout to "LVDS, NONE" then I believe that you won't be able to use any external monitor, correct me if I am wrong. Thus, a better choice would be "LVDS,AUTO" or "LVDS,CRT"

yaneurabeya · Post by **yaneurabeya** » Mon Mar 28, 2005 10:09 pm

Just looked over your guy's configs again. Make sure to disable agpgart, dri, and maybe some font stuff. It affects the nvidia drivers at least.

The LVDS part seems to screw over ATi users too...

MasterX · Post by **MasterX** » Tue Mar 29, 2005 5:21 am

yaneurabeya wrote:Just looked over your guy's configs again. Make sure to disable agpgart, dri, and maybe some font stuff. It affects the nvidia drivers at least.

The LVDS part seems to screw over ATi users too...

Well, internal agpgart is disabled, but not DRI. If I do that then I can also use the radeon driver