Przy próbie konfiguracji Xorg pojawia się błąd. Niestety google nic mi nie pomogły. Proszę forumowiczów o pomoc. Moja karta graficzna to Ati Mobility Radeon HD 5470.
Code: Select all
Xorg -configure
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.34-gentoo-r6 x86_64
Current Operating System: Linux MSI 2.6.34-gentoo-r6 #1 SMP Mon Aug 30 01:51:44 CEST 2010 x86_64
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda2
Build Date: 30 August 2010 02:10:57PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 31 01:31:42 2010
List of video drivers:
fglrx
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
Backtrace:
0: Xorg (xorg_backtrace+0x28) [0x467e60]
1: Xorg (0x400000+0x5dd26) [0x45dd26]
2: /lib/libpthread.so.0 (0x7f4a59657000+0xf010) [0x7f4a59666010]
3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (atiddxProbe+0xb3d) [0x7f4a5743dbcd]
4: Xorg (xf86CallDriverProbe+0x2a1) [0x475bb3]
5: Xorg (DoConfigure+0x185) [0x4f6352]
6: Xorg (InitOutput+0x198) [0x476d97]
7: Xorg (0x400000+0x24eff) [0x424eff]
8: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f4a586fabbd]
9: Xorg (0x400000+0x24c49) [0x424c49]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Aborted
lspci
Code: Select all
00:00.0 Host bridge: Intel Corporation Arrandale DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Arrandale PCI Express x16 Root Port (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Arrandale Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation Ibex Peak High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 2 (rev 06)
00:1c.3 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 4 (rev 06)
00:1c.5 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 6 (rev 06)
00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation Ibex Peak 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation Ibex Peak Thermal Subsystem (rev 06)
01:00.0 VGA compatible controller: ATI Technologies Inc Device 68e0
01:00.1 Audio device: ATI Technologies Inc Device aa68
06:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
3f:00.0 Host bridge: Intel Corporation QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Device 2d12 (rev 02)
3f:02.3 Host bridge: Intel Corporation Device 2d13 (rev 02)
make.conf
Code: Select all
CHOST="x86_64-pc-linux-gnu"
CFLAGS="-march=nocona -O2 -pipe"
CXXFLAGS="${CFLAGS}"
USE="mmx sse sse2"
MAKEOPTS="-j3"
GENTOO_MIRRORS="rsync://gentoo.prz.rzeszow.pl/gentoo"
SYNC="rsync://rsync3.pl.gentoo.org/gentoo-portage"
USE="extras -gtk -gnome qt4 kde dvd alsa cdr"
INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="fglrx"
dmesg:
Code: Select all
le to locate Rio Grande table in EBDA - bailing!
Subtract (79 early reservations)
#1 [0001000000 - 00016db574] TEXT DATA BSS
#2 [0037cd5000 - 0037ff0000] RAMDISK
#3 [00016dc000 - 00016dc22b] BRK
#4 [00000fca10 - 0000100000] BIOS reserved
#5 [00000fca00 - 00000fca10] MP-table mpf
#6 [000009bc00 - 00000fc780] BIOS reserved
#7 [00000fc990 - 00000fca00] BIOS reserved
#8 [00000fc780 - 00000fc990] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 000001a000] PGTABLE
#12 [000001a000 - 000001b000] PGTABLE
#13 [00016dc240 - 00016dd240] BOOTMEM
#14 [00016db580 - 00016db770] BOOTMEM
#15 [0001ede000 - 0001edf000] BOOTMEM
#16 [0001edf000 - 0001ee0000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00016db780 - 00016db900] BOOTMEM
#19 [00016dd240 - 00016f5240] BOOTMEM
#20 [00016f5240 - 00016fb240] BOOTMEM
#21 [00016fc000 - 00016fd000] BOOTMEM
#22 [00016db900 - 00016db941] BOOTMEM
#23 [00016db980 - 00016db9c3] BOOTMEM
#24 [00016fb240 - 00016fb898] BOOTMEM
#25 [00016dba00 - 00016dba68] BOOTMEM
#26 [00016dba80 - 00016dbae8] BOOTMEM
#27 [00016dbb00 - 00016dbb68] BOOTMEM
#28 [00016dbb80 - 00016dbbe8] BOOTMEM
#29 [00016dbc00 - 00016dbc68] BOOTMEM
#30 [00016dbc80 - 00016dbce8] BOOTMEM
#31 [00016dbd00 - 00016dbd68] BOOTMEM
#32 [00016dbd80 - 00016dbde8] BOOTMEM
#33 [00016dbe00 - 00016dbe68] BOOTMEM
#34 [00016dbe80 - 00016dbee8] BOOTMEM
#35 [00016dbf00 - 00016dbf68] BOOTMEM
#36 [00016dbf80 - 00016dbfe8] BOOTMEM
#37 [00016fb8c0 - 00016fb928] BOOTMEM
#38 [00016fb940 - 00016fb9a8] BOOTMEM
#39 [00016fb9c0 - 00016fba28] BOOTMEM
#40 [00016fba40 - 00016fbaa8] BOOTMEM
#41 [00016fbac0 - 00016fbb28] BOOTMEM
#42 [00016fbb40 - 00016fbba8] BOOTMEM
#43 [00016fbbc0 - 00016fbc28] BOOTMEM
#44 [00016fbc40 - 00016fbca8] BOOTMEM
#45 [00016fbcc0 - 00016fbd28] BOOTMEM
#46 [00016fbd40 - 00016fbda8] BOOTMEM
#47 [00016fbdc0 - 00016fbe28] BOOTMEM
#48 [00016fbe40 - 00016fbea8] BOOTMEM
#49 [00016fbec0 - 00016fbf28] BOOTMEM
#50 [00016fbf40 - 00016fbfa8] BOOTMEM
#51 [00016fd000 - 00016fd068] BOOTMEM
#52 [00016fd080 - 00016fd0e8] BOOTMEM
#53 [00016fbfc0 - 00016fbfe0] BOOTMEM
#54 [00016fd100 - 00016fd120] BOOTMEM
#55 [00016fd140 - 00016fd17e] BOOTMEM
#56 [00016fd180 - 00016fd1be] BOOTMEM
#57 [0001800000 - 000181a000] BOOTMEM
#58 [0001840000 - 000185a000] BOOTMEM
#59 [0001880000 - 000189a000] BOOTMEM
#60 [00018c0000 - 00018da000] BOOTMEM
#61 [0001900000 - 000191a000] BOOTMEM
#62 [0001940000 - 000195a000] BOOTMEM
#63 [0001980000 - 000199a000] BOOTMEM
#64 [00019c0000 - 00019da000] BOOTMEM
#65 [00016ff1c0 - 00016ff1c8] BOOTMEM
#66 [00016ff200 - 00016ff208] BOOTMEM
#67 [00016ff240 - 00016ff260] BOOTMEM
#68 [00016ff280 - 00016ff2c0] BOOTMEM
#69 [00016ff2c0 - 00016ff3e0] BOOTMEM
#70 [00016ff400 - 00016ff448] BOOTMEM
#71 [00016ff480 - 00016ff4c8] BOOTMEM
#72 [00016ff500 - 0001707500] BOOTMEM
#73 [00019da000 - 0001dda000] BOOTMEM
#74 [0005800000 - 0005a00000] BOOTMEM
#75 [0005a00000 - 0009a00000] BOOTMEM
#76 [0001707500 - 0001727500] BOOTMEM
#77 [0001727500 - 0001767500] BOOTMEM
#78 [000001c800 - 0000024800] BOOTMEM
Memory: 3838012k/4849664k available (4170k kernel code, 870948k absent, 140704k reserved, 1564k data, 440k init)
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2260.987 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.97 BogoMIPS (lpj=22609870)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
Booting Node 0, Processors #1
CPU1: Thermal monitoring handled by SMI
#2
CPU2: Thermal monitoring handled by SMI
#3
CPU3: Thermal monitoring handled by SMI
Brought up 4 CPUs
Total of 4 processors activated (18087.40 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: Look up EC in DSDT
ACPI: EC: ASUSTek keeps feeding us with broken ECDT tables, which are very hard to workaround. Trying to use DSDT EC info instead. Please send output of acpidump to linux-acpi@vger.kernel.org
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000caea4c18 003BA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000caea2618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000caea3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000caea1d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xf0400000-0xf07fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xe080-0xe087]
pci 0000:00:16.0: reg 10: [mem 0xf6c0a000-0xf6c0a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf6c08000-0xf6c083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf6c00000-0xf6c03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf6c07000-0xf6c073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xf6c06000-0xf6c067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf6c05000-0xf6c050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:00:1f.6: reg 10: [mem 0xf6c04000-0xf6c04fff 64bit]
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf5800000-0xf6bfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 03-05]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf2ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [mem 0xf4400000-0xf440ffff 64bit]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 06-06]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xf4400000-0xf57fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [io 0x9000-0x90ff]
pci 0000:07:00.0: reg 18: [mem 0xf3024000-0xf3024fff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xf3020000-0xf3023fff 64bit pref]
pci 0000:07:00.0: reg 30: [mem 0xf3000000-0xf301ffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf43fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Root Bridge [CPBG] (0000:3f)
pci_bus 0000:3f: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 7 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000cadec000 - 00000000cbffffff
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xff00-0xff0f] has been reserved
system 00:05: [io 0xff14-0xff17] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xf7fff000-0xf7ffffff] has been reserved
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0100000-0xf02fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xf6d00000-0xf6efffff 64bit pref]
pci 0000:00:1c.3: BAR 9: assigned [mem 0xf6f00000-0xf70fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xf7100000-0xf72fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf5800000-0xf6bfffff]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf02fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-05]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xf0800000-0xf2ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf6d00000-0xf6efffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-06]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xf4400000-0xf57fffff]
pci 0000:00:1c.3: bridge window [mem 0xf6f00000-0xf70fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf43fffff]
pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf72fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: enabling device (0000 -> 0003)
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 12 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf5800000-0xf6bfffff]
pci_bus 0000:02: resource 2 [mem 0xf0100000-0xf02fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf2ffffff]
pci_bus 0000:03: resource 2 [mem 0xf6d00000-0xf6efffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xf4400000-0xf57fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf70fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:07: resource 1 [mem 0xf3000000-0xf43fffff]
pci_bus 0000:07: resource 2 [mem 0xf7100000-0xf72fffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:08: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:08: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:08: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:08: resource 12 [mem 0xd0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3180k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
audit: initializing netlink socket (disabled)
type=2000 audit(1283201544.187:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Slow work thread pool: Starting up
Slow work thread pool: Ready
GFS2 (built Aug 30 2010 01:48:22) installed
msgmni has been set to 7502
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 begin_of_the_skype_highlighting 8250/16550 end_of_the_skype_highlighting begin_of_the_skype_highlighting 8250/16550 end_of_the_skype_highlighting begin_of_the_skype_highlighting 8250/16550 end_of_the_skype_highlighting begin_of_the_skype_highlighting 8250/16550 end_of_the_skype_highlighting driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 440k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
libata version 3.00 loaded.
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6c06000 port 0xf6c06100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xf6c06000 port 0xf6c06180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf6c06000 port 0xf6c06300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xf6c06000 port 0xf6c06380 irq 29
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TM01, max UDMA/100
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
ata6.00: ATA-8: WDC WD3200BEVT-22A23T0, 01.01A01, max UDMA/133
ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TM01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
scsi 5:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 5:0:0:0: [sda] Attached SCSI disk
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.14
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.14
Fusion MPT FC Host driver 3.04.14
Fusion MPT SAS Host driver 3.04.14
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[24702]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
QLogic Fibre Channel HBA Driver: 8.03.02-k2
Emulex LightPulse Fibre Channel SCSI driver 8.3.10
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6c08000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf6c07000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-1: new high speed USB device using ehci_hcd and address 2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
raid6: int64x1 2549 MB/s
usb 2-1.2: new high speed USB device using ehci_hcd and address 3
raid6: int64x2 2601 MB/s
raid6: int64x4 2135 MB/s
usb 2-1.3: new full speed USB device using ehci_hcd and address 4
raid6: int64x8 1630 MB/s
raid6: sse2x1 6231 MB/s
raid6: sse2x2 7207 MB/s
raid6: sse2x4 8285 MB/s
raid6: using algorithm sse2x4 (8285 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 9578.400 MB/sec
xor: using function: generic_sse (9578.400 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.13)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): mounted filesystem with writeback data mode
udev: starting version 151
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C09:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input4
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMBI [mem 0x0000e000-0x0000e00f pref window]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (0 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [THRM] (60 C)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ACPI: Battery Slot [BAT1] (battery present)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:07:00.0: setting latency timer to 64
r8169 0000:07:00.0: irq 30 for MSI/MSI-X
r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc900040a2000, 40:61:86:1e:42:14, XID 081000c0 IRQ 30
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3593 MBytes.
[fglrx] vendor: 1002 device: 68e0 count: 1
[fglrx] ioport: bar 4, base 0xd000, size: 0x100
pci 0000:01:00.0: enabling device (0000 -> 0003)
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.75.5 [Jun 29 2010] with 1 minors
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC662 rev1: BIOS auto-probing.
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 32 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
EXT3-fs (sda2): using internal journal
r8169 0000:07:00.0: eth0: link up
r8169 0000:07:00.0: eth0: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
