[SOLVED] Sterowniki do kart sieciowych

[Belliash]

Witam,

Znajdzie sie tutaj posiadacz chociaz 1 z wymienionych kart, ktory moze potwierdzic ze dzialaja prawidlowo, bez wiekszych problemow?

* Atheros AR8131 (Ethernet)
* Realtek RTL8191SE (Wireless LAN)

Z gory dziekuje i pozdrawiam!

[ender74]

* Realtek RTL8191SE (Wireless LAN)

Działa bez problemów ze sterownikami ze strony producenta.

[no4b]

Mam coś takiego:
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)

Działa na sterowniku z kernela.

[Belliash]

Tak, ethernet dziala na sterowniku z kernela atl1c. WiFi jeszcze nie testowalem, poki co nie mialem zbytnio czasu, rozejrzalem sie tylko za ebuildem ale nic konkretnego tez nie znalazlem.
Jak bede cos wiedzial to dam znac, jakby ktos jeszcze szukal w przyszlosci

[Belliash]

# Copyright 1999-2010 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $

EAPI=2

inherit eutils linux-mod

MY_P="${PN}_linux_${PV}"

DESCRIPTION="Legacy driver for the RTL8192se wireless chipset"
HOMEPAGE="http:///www.realtek.com.tw/"
SRC_URI="http://github.com/downloads/benf/gentoo ... _P}.tar.gz"

LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~x86 ~amd64"
IUSE=""

DEPEND=""
RDEPEND=""

S=${WORKDIR}/${MY_P}

MODULE_NAMES="r8192se_pci(net::${S}/HAL/rtl8192)"
BUILD_TARGETS="clean all"

src_install() {
linux-mod_src_install

insinto /$(get_libdir)/firmware/RTL8192SE
doins firmware/RTL8192SE/rtl8192sfw.bin

dodoc readme.txt
}

diff --git a/HAL/rtl8192/Makefile b/HAL/rtl8192/Makefile
index 34160ee..73d493b 100755
--- a/HAL/rtl8192/Makefile
+++ b/HAL/rtl8192/Makefile
@@ -65,10 +65,10 @@ EXTRA_CFLAGS += -DEEPROM_OLD_FORMAT_SUPPORT=0 \
-DUSE_FW_SOURCE_IMG_FILE \
-DENABLE_DOT11D \
-DCONFIG_ASPM_OR_D3 \
- # \
- -DCONFIG_CRDA \
-DCONFIG_CFG_80211 \
-DCONFIG_RTL_RFKILL \
+ # \
+ -DCONFIG_CRDA \
-DCONFIG_FW_SETCHAN \
-DRTL8192S_WAPI_SUPPORT \
-D_ENABLE_SW_BEACON \

Krotko mowiac dziala. W porownaniu do iwl5100, zasieg poprawil sie z 65-80% na 80-90%, choc czasami potrafi teraz spasc do ~50%.

[d1ck]

Witam serdecznie,

Posiadam w swojej Toshibie tematyczną kartę WLan (Realtek RTL8191SE), mam problem z jej instalacją z wykorzystanie powyższego ebuilda oraz sterami ze strony producenta.
Czy ktoś jest w stanie mnie naprowadzić co mogę robić źle?

[32;01m*[0m CPV: net-wireless/rtl8192se-2.6.0015.0127.2010
[32;01m*[0m REPO:
[32;01m*[0m USE: amd64 elibc_glibc kernel_linux multilib userland_GNU
[32;01m*[0m Determining the location of the kernel source code
[32;01m*[0m Found kernel source directory:
[32;01m*[0m /usr/src/linux
[32;01m*[0m Found kernel object directory:
[32;01m*[0m /lib/modules/2.6.33-gentoo-r2/build
[32;01m*[0m Found sources for kernel version:
[32;01m*[0m 2.6.33-gentoo-r2
>>> Unpacking source...
>>> Unpacking rtl8192se_linux_2.6.0015.0127.2010.tar.gz to /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work
>>> Source unpacked in /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work
>>> Compiling source in /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010 ...
ln: creating symbolic link `Module.symvers': File exists
[32;01m*[0m Preparing r8192se_pci module
make -j5 HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= clean all
make[1]: Entering directory `/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192'
make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
rm -fr .tmp_versions
rm -fr Modules.symvers
rm -fr Module.symvers
rm -fr Module.markers
rm -fr modules.order
rm -fr tags
make[2]: Entering directory `/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s'
rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
rm -fr .tmp_versions
rm -fr Modules.symvers
rm -fr Module.symvers
rm -fr Module.markers
rm -fr modules.order
rm -fr tags
make[2]: Leaving directory `/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s'
make[1]: Leaving directory `/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192'
make[1]: Entering directory `/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/rtllib'
make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
rm -fr *.mod.c *.mod *.o .*.cmd *.mod.* *.ko *.o *~
rm -rf .tmp_versions
rm -rf Module.symvers
rm -fr Module.markers
rm -fr modules.order
rm -fr tags
make[1]: Leaving directory `/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/rtllib'
make[1]: Entering directory `/usr/src/linux-2.6.33-gentoo-r2'
make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.

WARNING: Symbol version dump /usr/src/linux-2.6.33-gentoo-r2/Module.symvers
is missing; modules will have no dependencies and modversions.

CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_core.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_regd.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_rfkill.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_eeprom.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_wx.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_cam.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_pm.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_ps.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_dm.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_debug.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_ethtool.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_dev.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_Efuse.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_phy.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_firmware.o
/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_firmware.c: In function 'FirmwareSetH2CCmd':
/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_firmware.c:714: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_rtl6052.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_led.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_mp.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_scan.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_rx.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_softmac.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_tx.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_wx.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_module.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_softmac_wx.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtl819x_HTProc.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtl819x_TSProc.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtl819x_BAProc.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/dot11d.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_tkip.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_ccmp.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_wep.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/wapi.o
CC [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/wapi_interface.o
LD [M] /var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/r8192se_pci.o
Building modules, stage 2.
MODPOST 1 modules
/bin/sh: scripts/mod/modpost: No such file or directory
make[2]: *** [__modpost] Error 127
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.33-gentoo-r2'
make: *** [all] Error 2
[31;01m*[0m ERROR: net-wireless/rtl8192se-2.6.0015.0127.2010 failed:
[31;01m*[0m Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= clean all
[31;01m*[0m
[31;01m*[0m Call stack:
[31;01m*[0m ebuild.sh, line 54: Called src_compile
[31;01m*[0m environment, line 3529: Called linux-mod_src_compile
[31;01m*[0m environment, line 2730: Called die
[31;01m*[0m The specific snippet of code:
[31;01m*[0m eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
[31;01m*[0m
[31;01m*[0m If you need support, post the output of 'emerge --info =net-wireless/rtl8192se-2.6.0015.0127.2010',
[31;01m*[0m the complete build log and the output of 'emerge -pqv =net-wireless/rtl8192se-2.6.0015.0127.2010'.
[31;01m*[0m This ebuild is from an overlay: '/usr/local/portage/'
[31;01m*[0m The complete build log is located at '/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/temp/build.log'.
[31;01m*[0m The ebuild environment file is located at '/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/temp/environment'.
[31;01m*[0m S: '/var/tmp/portage/net-wireless/rtl8192se-2.6.0015.0127.2010/work/rtl8192se_linux_2.6.0015.0127.2010'

Portage 2.1.8.3 (default/linux/amd64/10.0, gcc-4.4.3, glibc-2.10.1-r1, 2.6.33-gentoo-r2 x86_64)
=================================================================
System uname: Linux-2.6.33-gentoo-r2-x86_64-Intel-R-_Core-TM-_i3_CPU_M_330_@_2.13GHz-with-gentoo-1.12.13
Timestamp of tree: Thu, 08 Jul 2010 06:00:20 +0000
app-shells/bash: 4.0_p37
dev-lang/python: 2.6.5-r2, 3.1.2-r3
dev-util/cmake: 2.8.1-r2
sys-apps/baselayout: 1.12.13
sys-apps/sandbox: 1.6-r2
sys-devel/autoconf: 2.65
sys-devel/automake: 1.8.5-r4, 1.11.1
sys-devel/binutils: 2.20.1-r1
sys-devel/gcc: 4.4.3-r2
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.30-r1
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=core2 -msse4 -mcx16 -mpopcnt -msahf -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=core2 -msse4 -mcx16 -mpopcnt -msahf -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo ftp://mirror.netcologne.de/gentoo/ ftp://mirror.opteamax.de/gentoo/ ftp://linux.rz.ruhr-uni-bochum.de/gentoo-mirror/ ftp://ftp.spline.inf.fu-berlin.de/mirrors/gentoo/ ftp://ftp6.uni-erlangen.de/pub/mirrors/gentoo"
LDFLAGS="-Wl,-O1"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X acl amd64 berkdb bzip2 cli cracklib crypt cups cxx dbus dri fortran gdbm gpm gtk hal iconv ipv6 kde mmx mng modules mudflap multilib mysql ncurses nls nptl nptlonly opengl openmp pam pcre perl png pppd python qt3 qt3support qt4 readline reflection session spl sql sse sse2 ssl svg sysfs tcpd unicode webkit xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

Dzięki i pozdrawiam

[Belliash]

Zrezygnowalem z ebuilda, bo stery sa dziurawe i gubily zasieg. Musialem recznie nakladac latki i recznie je zbudowalem.