But for a time now, it refuses to work. I'm not using it to often, it's an ink and I prefer laser. But the laser wont print from the scanner so I usually makes document copies from the scanner to the ink.
When I install the printer in CUPS I select the unit as: "HP Printer (HPLIP)
(URI: hp:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH" and the driver as "HP Deskjet f300 Series (en).
Then when I try to print a testpage the printer stops with the message "/usr/libexec/cups/backend/hp failed".
To be clear: The real printer do nothing, only the device in CUPS signals.
if I run hp-check I receive this:
Code: Select all
>hp-check
HP Linux Imaging and Printing System (ver. 3.9.12)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed
to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
-Xlib: extension "RANDR" missing on display ":0.0".
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux jme 2.6.27-gentoo-r8 #2 SMP Sat Mar 21 20:09:45 CET 2009 i686 Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz GenuineIntel GNU/Linux
Distribution:
gentoo 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
OK, version 4.7 installed.
Checking for CUPS...
Status: schemaläggare körs
Version: 1.3.11
error_log is set to level: info
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: PolicyKit - Administrative policy framework...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
html=/usr/share/doc/hplip-3.9.12/html
icon=/usr/share/applications
cupsbackend=/usr/libexec/cups/backend
cupsfilter=/usr/libexec/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=no
dbus-build=yes
cups11-build=no
doc-build=no
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
working_dir = /home/larand/Documents/Ekonomi
printer_name = HP_f370
device_uri = "hp:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH"
[commands]
scan_int = False
fax = hp-sendfax -d %FAX_URI%
scan = xsane -V %SANE_URI%
prnt = hp-print -p%PRINTER%
pcard_int = True
prnt_int = True
pcard = hp-unload -d %DEVICE_URI%
cpy = hp-makecopies -d %DEVICE_URI%
fax_int = True
cpy_int = True
[installation]
version = 3.9.12.29
date_time = 2010-04-09 11:41:09
[settings]
systray_messages = 0
systray_visible = 0
[alerts]
email_from_address =
email_alerts = False
email_to_addresses =
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 0
[polling]
enable = false
device_list =
interval = 5
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
------------------------------------------------- -----------------------------------
hp:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH HP Deskjet F300 series
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Colorprint
----------
Type: Unknown
Device URI: ///dev/null
Deskjet_F300
------------
Type: Printer
Device URI: hp:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH
PPD: /etc/cups/ppd/Deskjet_F300.ppd
PPD Description: HP Deskjet f300 Series, hpcups 3.9.12
Printer status: skrivare Deskjet_F300 är overksam. aktiverad sedan fre 9 apr 2010 11.09.57
Communication status: Good
Deskjet_F300_2
--------------
Type: Printer
Device URI: hp:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH
PPD: /etc/cups/ppd/Deskjet_F300_2.ppd
PPD Description: HP Deskjet f300 Series, hpcups 3.9.12
Printer /usr/libexec/cups/backend/hp failed inaktiverad sedan fre 9 apr 2010 11.37.58 -
Communication status: Good
HP_f370
-------
Type: Printer
Device URI: hp:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH
PPD: /etc/cups/ppd/HP_f370.ppd
PPD Description: HP 915 Foomatic/hpijs, hpijs 2.8.6b
Printer /usr/libexec/cups/filter/foomatic-rip failederad sedan fre 9 apr 2010 11.09.11
Communication status: Good
XEROX
-----
Type: Unknown
Device URI: lpd://172.16.68.30/PASSTHRU
PPD: /etc/cups/ppd/XEROX.ppd
PPD Description: Xerox DocuPrint 4517 PostScript Level 2
Printer status: skrivare XEROX är overksam. aktiverad sedan fre 9 apr 2010 09.15.53
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH' is a Hewlett-Packard Deskjet_F300_series all-in-one
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x5511 at 006:002:
Device URI: hp:/usb/Deskjet_F300_series?serial=CN6BHGK25G04KH
Device node: /dev/bus/usb/006/002
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/006/002
# owner: root
# group: scanner
user::rw-
group::rw-
other::r--
---------------
| USER GROUPS |
---------------
users disk lp wheel console audio cdrom video games usb lpadmin scanner camera clamav tcpdump wireshark pulse amarokuser polkituser
-----------
| SUMMARY |
-----------
error: 5 errors and/or warnings.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
.
