Hade en hel del strul innan jag fick igång svensk tangentbordslayout tillsammans med nya Xorg 1.5 och autodetektering via HAL. Datorn är en HP laptop i Pavillion dv2000-serien med bl.a. Synaptic-touchpad. Postar alla relevanta configfiler här.
I Xorg.conf kommenterade jag bort allt som handlade om mus eller tangentbord och lade till sektionen med ServerFlags.
Code: Select all
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
#InputDevice "Mouse0" "CorePointer"
#InputDevice "TouchPad" "AlwaysCore"
#InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "on"
Option "AutoEnableDevices" "on"
Option "AllowEmptyInput" "on"
EndSection
Section "Files"
#RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
# FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/freefont"
FontPath "/usr/share/fonts/sharefonts"
FontPath "/usr/share/fonts/terminus"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/unifont"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/artwiz"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "dbe"
Load "GLcore"
#Load "dri"
Load "freetype"
Load "type1"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "se"
#EndSection
#Section "Module"
# Load "synaptics"
#EndSection
Section "Module"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection
#Section "InputDevice"
# Driver "synaptics"
# Identifier "TouchPad"
# Option "Device" "/dev/input/mouse1"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "1700"
# Option "RightEdge" "5300"
# Option "TopEdge" "1700"
# Option "BottomEdge" "4200"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "VertScrollDelta" "100"
# Option "MinSpeed" "0.09"
# Option "MaxSpeed" "0.18"
# Option "AccelFactor" "0.0015"
# Option "SHMConfig" "on"
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce Go 7200"
BusID "PCI:1:0:0"
Option "NvAGP" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Modes "1280x800" "1024x768"
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "1280x800" "1024x768"
Depth 24
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSectionI /etc/hal/fdi/policy har jag följande filer:
Code: Select all
flex policy # cat 10-keymap.fdi
<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>
<!-- If we're using Linux, we use evdev by default (falling back to
keyboard otherwise). -->
<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">se</merge>
<merge key="input.xkb.variant" type="string">sv</merge>
</match>
</device>
</deviceinfo>
Code: Select all
flex policy # cat 10-x11-input.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
<device>
<!-- Mouse configuration -->
<match key="info.capabilities" contains="input.mouse">
<merge key="input.x11_driver" type="string">evdev</merge>
</match>
<!-- Keyboard configuration -->
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.model" type="string">evdev</merge>
<merge key="input.x11_driver" type="string">evdev</merge>
<merge key="input.xkb.layout" type="string">se</merge>
<merge key="input.xkb.variant" type="string"></merge>
<merge key="input.xkb.options" type="string">grp:ctrl_shift_toggle,grp_led:scroll,caps:internal_nocancel</merge>
</match>
</device>
</deviceinfo> Code: Select all
flex policy # cat 10-xinput-configuration.fdi
<?xml version="1.0" encoding="UTF-8"?>
<!--
Section "InputDevice"
Driver "evdev"
Option "XkbLayout" "sv"
EndSection
-->
<deviceinfo version="0.2">
<match key="info.capabilities" contains="input.keyboard">
<merge key="input.x11_options.XkbLayout" type="string">se</merge>
</match>
</deviceinfo>Code: Select all
flex policy # cat 11-x11-synaptics.fdi
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
<match key="info.product" contains="Synaptics TouchPad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.SHMConfig" type="string">on</merge>
<!-- Tapping -->
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
<!-- Scrolling up/down -->
<merge key="input.x11_options.VertEdgeScroll" type="string">1</merge>
<merge key="input.x11_options.HorizEdgeScroll" type="string">1</merge>
<!-- Corner clicks -->
<merge key="input.x11_options.RBCornerButton" type="string">2</merge>
<merge key="input.x11_options.RTCornerButton" type="string">3</merge>
</match>
</match>
</device>
</deviceinfo>Hoppas detta hjälper någon iaf.
