Problems with cups

Message

artek · Post by **artek** » Tue Jul 29, 2003 9:51 am

Hi !
When I try to print test page on http://127.0.0.1:631 nothink happen but cups is writing that job is completed. when I try to restart this job it throw client-error-not-possible.
I configure my printer (HP Deskjet 920c) according to http://www.gentoo.org/doc/en/printing-howto.xml and I'm using hpijs driver.
In my var/log/cups/errors is such message restart_job: job #1 cannot be restarted - no files!

Thanks for help

lanius · Post by **lanius** » Tue Jul 29, 2003 7:32 pm

set LogLevel debug in your cupsd.conf and see if the log gives you a bit more information

artek · Post by **artek** » Wed Jul 30, 2003 9:27 am

This is my error-log after setting log level to debug

I [30/Jul/2003:10:53:56 +0000] Listening to 7f000001:631
I [30/Jul/2003:10:53:56 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Jul/2003:10:53:56 +0000] Configured for up to 100 clients.
I [30/Jul/2003:10:53:56 +0000] Allowing up to 100 client connections per host.
I [30/Jul/2003:10:53:56 +0000] Full reload is required.
I [30/Jul/2003:10:53:58 +0000] LoadPPDs: Read "/etc/cups/ppds.dat", 12 PPDs...
I [30/Jul/2003:10:53:58 +0000] LoadPPDs: No new or changed PPDs...
I [30/Jul/2003:10:53:58 +0000] Full reload complete.
I [30/Jul/2003:11:04:16 +0000] Listening to 7f000001:631
I [30/Jul/2003:11:04:16 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Jul/2003:11:04:16 +0000] Configured for up to 100 clients.
I [30/Jul/2003:11:04:16 +0000] Allowing up to 100 client connections per host.
I [30/Jul/2003:11:04:16 +0000] Full reload is required.
I [30/Jul/2003:11:04:18 +0000] LoadPPDs: Read "/etc/cups/ppds.dat", 12 PPDs...
I [30/Jul/2003:11:04:18 +0000] LoadPPDs: No new or changed PPDs...
I [30/Jul/2003:11:04:18 +0000] Full reload complete.
I [30/Jul/2003:11:23:49 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=16360)
I [30/Jul/2003:11:23:55 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=16361)
I [30/Jul/2003:11:23:55 +0000] Adding start banner page "none" to job 9.
I [30/Jul/2003:11:23:55 +0000] Adding end banner page "none" to job 9.
I [30/Jul/2003:11:23:55 +0000] Job 9 queued on 'HP' by ''.
I [30/Jul/2003:11:23:55 +0000] Started filter /usr/lib/cups/filter/pstops (PID 16362) for job 9.
I [30/Jul/2003:11:23:55 +0000] Started filter /usr/lib/cups/filter/foomatic-rip (PID 16363) for job 9.
I [30/Jul/2003:11:23:55 +0000] Started backend /usr/lib/cups/backend/parallel (PID 16364) for job 9.
E [30/Jul/2003:11:23:57 +0000] PID 16363 stopped with status 3!
I [30/Jul/2003:11:23:57 +0000] Hint: Try setting the LogLevel to "debug" to find out more.
I [30/Jul/2003:11:24:15 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16369)
I [30/Jul/2003:11:24:17 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16370)
I [30/Jul/2003:11:24:21 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16374)
E [30/Jul/2003:11:24:21 +0000] restart_job: job #9 cannot be restarted - no file

lanius · Post by **lanius** » Wed Jul 30, 2003 10:00 am

is "Printer Testing Using cat", described in the howto, working? what hpijs version and cups version do you use?

artek · Post by **artek** » Wed Jul 30, 2003 11:47 am

cat text.txt> /dev/lp0 works , I've hpijs-1.4.1 and cups-1.1.19-r1

lanius · Post by **lanius** » Wed Jul 30, 2003 11:52 am

strange, but loglevel ist still not debug, please set it to debug, restart cups, try to print again and post the output of error_log

artek · Post by **artek** » Wed Jul 30, 2003 12:29 pm

i forget to restart cups

[30/Jul/2003:14:31:12 +0000] Listening to 7f000001:631
D [30/Jul/2003:14:31:12 +0000] AddLocation: added location '/'
D [30/Jul/2003:14:31:12 +0000] DenyIP: / deny 00000000/00000000
D [30/Jul/2003:14:31:12 +0000] AllowIP: / allow 7f000001/ffffffff
D [30/Jul/2003:14:31:12 +0000] AddLocation: added location '/admin'
D [30/Jul/2003:14:31:12 +0000] DenyIP: /admin deny 00000000/00000000
D [30/Jul/2003:14:31:12 +0000] AllowIP: /admin allow 7f000001/ffffffff
I [30/Jul/2003:14:31:12 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Jul/2003:14:31:12 +0000] Configured for up to 100 clients.
I [30/Jul/2003:14:31:12 +0000] Allowing up to 100 client connections per host.
I [30/Jul/2003:14:31:12 +0000] Full reload is required.
D [30/Jul/2003:14:31:12 +0000] LoadAllPrinters: Loading printer HP...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "ipp"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "lpd"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp0"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp1"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp2"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp3"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp4"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp5"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp6"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp7"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp8"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp9"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp10"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp11"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp12"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp13"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp14"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp15"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "http"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "scsi"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "parallel:/dev/lp0"...
D [30/Jul/2003:14:31:14 +0000] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...
D [30/Jul/2003:14:31:14 +0000] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...
D [30/Jul/2003:14:31:14 +0000] LoadDevices: Added device "socket"...
I [30/Jul/2003:14:31:15 +0000] LoadPPDs: Read "/etc/cups/ppds.dat", 12 PPDs...
I [30/Jul/2003:14:31:15 +0000] LoadPPDs: No new or changed PPDs...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Scanning /var/spool/cups...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 1...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 3...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 4...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 5...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 6...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 7...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 8...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 9...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 10...
I [30/Jul/2003:14:31:15 +0000] Full reload complete.
D [30/Jul/2003:14:31:15 +0000] StartListening: NumListeners=1
D [30/Jul/2003:14:31:15 +0000] StartListening: address=7f000001 port=631
D [30/Jul/2003:14:31:15 +0000] ResumeListening: setting input bits...
D [30/Jul/2003:14:32:48 +0000] AcceptClient() 5 from localhost:631.
D [30/Jul/2003:14:32:48 +0000] ReadClient() 5 GET / HTTP/1.1
D [30/Jul/2003:14:32:48 +0000] SendFile() 5 file=6
D [30/Jul/2003:14:32:48 +0000] ReadClient() 5 GET /cups.css HTTP/1.1
D [30/Jul/2003:14:32:48 +0000] SendFile() 5 file=6
D [30/Jul/2003:14:32:48 +0000] ReadClient() 5 GET /images/navbar.gif HTTP/1.1
D [30/Jul/2003:14:32:48 +0000] SendFile() 5 file=6
D [30/Jul/2003:14:32:57 +0000] ReadClient() 5 GET /printers HTTP/1.1
D [30/Jul/2003:14:32:57 +0000] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 1106
I [30/Jul/2003:14:32:57 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1106)
D [30/Jul/2003:14:32:57 +0000] SendCommand() 5 file=8
D [30/Jul/2003:14:32:58 +0000] AcceptClient() 6 from localhost:631.
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 POST / HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] ProcessIPPRequest: 6 status_code=0
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 POST / HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] ProcessIPPRequest: 6 status_code=1
D [30/Jul/2003:14:32:58 +0000] CloseClient() 6
D [30/Jul/2003:14:32:58 +0000] AcceptClient() 6 from localhost:631.
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/left.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/right.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=9
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/printer-idle.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/print-test-page.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=9
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/stop-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/reject-jobs.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/modify-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/config-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/delete-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/add-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:33:01 +0000] ReadClient() 5 GET /printers/HP?op=print-test-page HTTP/1.1
D [30/Jul/2003:14:33:01 +0000] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 1107
I [30/Jul/2003:14:33:01 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1107)
D [30/Jul/2003:14:33:01 +0000] SendCommand() 5 file=9
D [30/Jul/2003:14:33:01 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:01 +0000] ReadClient() 8 POST /printers/HP HTTP/1.1
D [30/Jul/2003:14:33:01 +0000] print_job: request file type is application/postscript.
D [30/Jul/2003:14:33:01 +0000] check_quotas: requesting-user-name = ''
D [30/Jul/2003:14:33:01 +0000] print_job: requesting-user-name = ''
D [30/Jul/2003:14:33:01 +0000] Adding default job-sheets values "none,none"...
I [30/Jul/2003:14:33:01 +0000] Adding start banner page "none" to job 11.
I [30/Jul/2003:14:33:01 +0000] Adding end banner page "none" to job 11.
I [30/Jul/2003:14:33:01 +0000] Job 11 queued on 'HP' by ''.
D [30/Jul/2003:14:33:01 +0000] Job 11 hold_until = 0
D [30/Jul/2003:14:33:01 +0000] StartJob(11, 0x8091e90)
D [30/Jul/2003:14:33:01 +0000] StartJob() id = 11, file = 0/1
D [30/Jul/2003:14:33:01 +0000] job-sheets=none,none
D [30/Jul/2003:14:33:01 +0000] banner_page = 0
D [30/Jul/2003:14:33:01 +0000] StartJob: argv = "HP","11","","Test Page","1","","/var/spool/cups/d00011-001"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[2]="USER=root"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[3]="CHARSET=iso-8859-1"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[4]="LANG=en"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[5]=""
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[6]="PPD=/etc/cups/ppd/HP.ppd"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[7]="CUPS_SERVERROOT=/etc/cups"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[8]="RIP_MAX_CACHE=8m"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[9]="TMPDIR=/var/spool/cups/tmp"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[10]="CONTENT_TYPE=application/postscript"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[11]="DEVICE_URI=parallel:/dev/lp0"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[12]="PRINTER=HP"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[13]="CUPS_DATADIR=/usr/share/cups"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/Jul/2003:14:33:01 +0000] StartJob: statusfds = [ 10 11 ]
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[1] = [ 12 -1 ]
D [30/Jul/2003:14:33:01 +0000] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[0] = [ 13 14 ]
D [30/Jul/2003:14:33:01 +0000] start_process("/usr/lib/cups/filter/pstops", 0xbffe9850, 0xbffe8bc0, 12, 14, 11)
I [30/Jul/2003:14:33:01 +0000] Started filter /usr/lib/cups/filter/pstops (PID 1108) for job 11.
D [30/Jul/2003:14:33:01 +0000] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[1] = [ 12 15 ]
D [30/Jul/2003:14:33:01 +0000] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffe9850, 0xbffe8bc0, 13, 15, 11)
I [30/Jul/2003:14:33:01 +0000] Started filter /usr/lib/cups/filter/foomatic-rip (PID 1109) for job 11.
D [30/Jul/2003:14:33:01 +0000] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[0] = [ -1 13 ]
D [30/Jul/2003:14:33:01 +0000] start_process("/usr/lib/cups/backend/parallel", 0xbffe9850, 0xbffe8bc0, 12, 13, 11)
I [30/Jul/2003:14:33:01 +0000] Started backend /usr/lib/cups/backend/parallel (PID 1110) for job 11.
D [30/Jul/2003:14:33:01 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:02 +0000] CloseClient() 8
D [30/Jul/2003:14:33:02 +0000] [Job 11] Page = 612x792; 18,36 to 594,783
D [30/Jul/2003:14:33:02 +0000] [Job 11] slowcollate=0, slowduplex=0, sloworder=0
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%BoundingBox: 0 0 612 792
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Pages: 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%LanguageLevel: 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%DocumentData: Clean7Bit
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%DocumentSuppliedResources: procset testprint/1.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Creator: Michael Sweet, Easy Software Products
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%CreationDate: May 11, 1999
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Title: Test Page
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%EndComments
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%BeginProlog
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%BeginResource procset testprint 1.1 0
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%EndResource
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%EndProlog
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Page: 1 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Page: 1 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] pw = 576.0, pl = 747.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] PageLeft = 18.0, PageRight = 594.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] PageTop = 783.0, PageBottom = 36.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] PageWidth = 612.0, PageLength = 792.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] perl: warning: Setting locale failed.
D [30/Jul/2003:14:33:02 +0000] [Job 11] perl: warning: Please check that your locale settings:
D [30/Jul/2003:14:33:02 +0000] [Job 11] LANGUAGE = (unset),
D [30/Jul/2003:14:33:02 +0000] [Job 11] LC_ALL = (unset),
D [30/Jul/2003:14:33:02 +0000] [Job 11] LANG = "en"
D [30/Jul/2003:14:33:02 +0000] [Job 11] are supported and installed on your system.
D [30/Jul/2003:14:33:02 +0000] [Job 11] perl: warning: Falling back to the standard locale ("C").
D [30/Jul/2003:14:33:03 +0000] [Job 11] foomatic-rip version $Revision: 3.30 $ running...
D [30/Jul/2003:14:33:03 +0000] [Job 11] Parsing PPD file ...
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option ColorSpace
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Resolution
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PageSize
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PageRegion
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Model
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PrintoutMode
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option ImageableArea
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PaperDimension
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Duplex
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Quality
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Font
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Parameter Summary
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------------
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Spooler: cups
D [30/Jul/2003:14:33:03 +0000] [Job 11] Printer: HP
D [30/Jul/2003:14:33:03 +0000] [Job 11] PPD file: /etc/cups/ppd/HP.ppd
D [30/Jul/2003:14:33:03 +0000] [Job 11] Printer model: HP DeskJet 920C, Foomatic + hpijs (recommended)
D [30/Jul/2003:14:33:03 +0000] [Job 11] Job title: Test Page
D [30/Jul/2003:14:33:03 +0000] [Job 11] File(s) to be printed:
D [30/Jul/2003:14:33:03 +0000] [Job 11] <STDIN>
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] ================================================
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] File: <STDIN>
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] ================================================
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Reading PostScript input ...
D [30/Jul/2003:14:33:03 +0000] [Job 11] --> This document is DSC-conforming!
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginProlog
D [30/Jul/2003:14:33:03 +0000] [Job 11] 0 %%EOF
D [30/Jul/2003:14:33:03 +0000] [Job 11] Saw EOF!
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%EndProlog
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginSetup
D [30/Jul/2003:14:33:03 +0000] [Job 11] Inserting PostScript code for CUPS' page accounting
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *PrintoutMode Normal
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PrintoutMode=Normal --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PrintoutMode=Normal --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *Quality FromPrintoutMode
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Quality=FromPrintoutMode --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Quality=FromPrintoutMode --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *PageSize Letter
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PageSize=Letter --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PageSize=Letter --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *Duplex None
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Duplex=None --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: Duplex=None
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Duplex=None --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%EndSetup
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------
D [30/Jul/2003:14:33:03 +0000] [Job 11] New page: 1 1
D [30/Jul/2003:14:33:03 +0000] [Job 11] Inserting option code into "PageSetup" section.
D [30/Jul/2003:14:33:03 +0000] [Job 11] No page header or page header not DSC-conforming
D [30/Jul/2003:14:33:03 +0000] [Job 11] Stopping search for page header options
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found:
D [30/Jul/2003:14:33:03 +0000] [Job 11] pageHeight sub % Move down...
D [30/Jul/2003:14:33:03 +0000] [Job 11] --> Output goes directly to the renderer now.
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Starting renderer
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer PID pid4=1112
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="DESKJET 920" -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dDuplex=false -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2 -dIjsUseOutputFD -sOutputFile=- -
D [30/Jul/2003:14:33:03 +0000] [Job 11] JCL: <job data>
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] perl: warning: Setting locale failed.
D [30/Jul/2003:14:33:03 +0000] [Job 11] perl: warning: Please check that your locale settings:
D [30/Jul/2003:14:33:03 +0000] [Job 11] LANGUAGE = (unset),
D [30/Jul/2003:14:33:03 +0000] [Job 11] LC_ALL = (unset),
D [30/Jul/2003:14:33:03 +0000] [Job 11] LANG = "en"
D [30/Jul/2003:14:33:03 +0000] [Job 11] are supported and installed on your system.
D [30/Jul/2003:14:33:03 +0000] [Job 11] perl: warning: Falling back to the standard locale ("C").
D [30/Jul/2003:14:33:03 +0000] [Job 11] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=DESKJET 920' '-dDEVICEWIDTHPOINTS=612' '-dDEVICEHEIGHTPOINTS=792' '-dDuplex=false' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2' '-dIjsUseOutputFD' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer return value: 139
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer received signal: 139
D [30/Jul/2003:14:33:03 +0000] [Job 11] Flushing FIFO.
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Closing renderer
D [30/Jul/2003:14:33:03 +0000] [Job 11] KID3 exited with status 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] Renderer exit stat: 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] Process dieing with "The renderer may have dumped core.", exit stat: 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] The renderer may have dumped core.
D [30/Jul/2003:14:33:03 +0000] [Job 11] tail process done writing data to STDOUT
D [30/Jul/2003:14:33:03 +0000] [Job 11] KID4 finished
D [30/Jul/2003:14:33:03 +0000] [Job 11] Renderer process finished
D [30/Jul/2003:14:33:03 +0000] [Job 11] Process dieing with "Error closing renderer", exit stat: 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] Error closing renderer
E [30/Jul/2003:14:33:03 +0000] PID 1109 stopped with status 3!
D [30/Jul/2003:14:33:03 +0000] UpdateJob: job 11, file 0 is complete.
D [30/Jul/2003:14:33:03 +0000] CancelJob: id = 11
D [30/Jul/2003:14:33:03 +0000] StopJob: id = 11, force = 0
D [30/Jul/2003:14:33:03 +0000] StopJob: printer state is 3
D [30/Jul/2003:14:33:13 +0000] ReadClient() 6 GET /printers/HP HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 1115
I [30/Jul/2003:14:33:13 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1115)
D [30/Jul/2003:14:33:13 +0000] SendCommand() 6 file=9
D [30/Jul/2003:14:33:13 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:13 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:13 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] ProcessIPPRequest: 8 status_code=1
D [30/Jul/2003:14:33:13 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:13 +0000] CloseClient() 8
D [30/Jul/2003:14:33:13 +0000] ReadClient() 5 GET /images/show-completed.gif HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:33:16 +0000] ReadClient() 6 GET /jobs HTTP/1.1
D [30/Jul/2003:14:33:16 +0000] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 1116
I [30/Jul/2003:14:33:16 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=1116)
D [30/Jul/2003:14:33:16 +0000] SendCommand() 6 file=9
D [30/Jul/2003:14:33:16 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:16 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:16 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:16 +0000] CloseClient() 8
D [30/Jul/2003:14:33:18 +0000] ReadClient() 5 GET /jobs?which_jobs=completed HTTP/1.1
D [30/Jul/2003:14:33:18 +0000] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 1117
I [30/Jul/2003:14:33:18 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=1117)
D [30/Jul/2003:14:33:18 +0000] SendCommand() 5 file=9
D [30/Jul/2003:14:33:18 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:18 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:18 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:18 +0000] CloseClient() 8
D [30/Jul/2003:14:33:19 +0000] ReadClient() 6 GET /images/restart-job.gif HTTP/1.1
D [30/Jul/2003:14:33:19 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:33:19 +0000] ReadClient() 5 GET /images/show-active.gif HTTP/1.1
D [30/Jul/2003:14:33:19 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:33:22 +0000] ReadClient() 6 GET /jobs/?op=restart-job&job_id=11&job_printer_uri=/printers/HP HTTP/1.1
D [30/Jul/2003:14:33:22 +0000] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 1118
I [30/Jul/2003:14:33:22 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=1118)
D [30/Jul/2003:14:33:22 +0000] SendCommand() 6 file=9
D [30/Jul/2003:14:33:22 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:22 +0000] ReadClient() 8 POST /jobs HTTP/1.1
E [30/Jul/2003:14:33:22 +0000] restart_job: job #11 cannot be restarted - no files!
D [30/Jul/2003:14:33:22 +0000] Sending error: client-error-not-possible
D [30/Jul/2003:14:33:22 +0000] ProcessIPPRequest: 8 status_code=404
D [30/Jul/2003:14:33:22 +0000] CloseClient() 8
D [30/Jul/2003:14:34:24 +0000] CloseClient() 5
D [30/Jul/2003:14:34:24 +0000] CloseClient() 6

lanius · Post by **lanius** » Wed Jul 30, 2003 12:37 pm

hm, try to remerge ghostscript

artek · Post by **artek** » Thu Jul 31, 2003 8:36 am

still nothing

lanius · Post by **lanius** » Thu Jul 31, 2003 8:57 am

sorry, no idea

you could ty to remerge hpijs, remove your printer and reinstall him.

artek · Post by **artek** » Thu Jul 31, 2003 9:30 am

ok ,thanks for help

Slynix · Post by **Slynix** » Sat Oct 18, 2003 8:29 pm

heino wrote:hm, try to remerge ghostscript

Gaaah been looking for this all day

This happens to me often when I Install my printer. I forget to emerge ghostscript.

I had exactly the same problem as artek and thi fixed it

vortex01 · Post by **vortex01** » Thu Oct 28, 2004 12:20 pm

This also happens to me.

But in my search, I found

http://forums.gentoo.org/viewtopic.php? ... 42#1684842

Which mentions a known ghostscript bug.

Also mentions downgrading to ghostscript-7.07.1-r1 fixes, but beware or put up with known vulnerabilities.

Stepping down to r1 fixed this issue for me.