Here's my xorg.conf:
Code: Select all
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# === ATI device section ===
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
### EOF ###
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Server Layout"
Screen "Screen0" 0 0
# Screen "Screen1" LeftOf "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "TouchPad" "AlwaysCore"
Option "AIGLX" "true"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# The module search path. The default path is shown here.
FontPath "/usr/share/fonts/misc/:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
Load "drm" # libdrm.a
Load "synaptics"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "InputDevice"
Identifier "TouchPad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "10"
Option "FingerHigh" "15"
Option "MaxTapTime" "150"
Option "MaxTapMove" "200"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.09"
Option "MaxSped" "0.18"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 65.0
VertRefresh 60.0 - 85.0
Option "DPMS"
DisplaySize 418 314
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor1"
HorizSync 31.5 - 75
VertRefresh 50.0 - 70.0
Option "DPMS"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=3154
Identifier "ATI Graphics Adapter"
Driver "radeon"
Option "AGPMode" "4"
Option "AllowGLXWithComposite" "on"
Option "RenderAccel" "on"
Option "ColorTiling" "on"
# === Misc Options ===
# Option "XaaNoScanlineImageWriteRect"
# Option "XaaNoScanlineCPUToScreenColorExpandFill"
Option "XaaNoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "MergedFB" "true"
#Option "MonitorLayout" "LVDS, TMDS"
Option "CRT2Position" "RightOf"
Option "CRT2Hsync" "31.5-80.0"
Option "CRT2VRefresh" "50-90"
Option "MetaModes" "1400x1050-1280x1024 1400x1050 1280x1024-1280x1024 1280x1024"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "ATI Graphics Adapter1"
Driver "radeon"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
#Option "backingstore"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024"
Option "MetaModes" "1400x1050-1280x1024 1400x1050 1280x1024-1280x1024 1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI Graphics Adapter1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768"
Option "MetaModes" "1400x1050-1280x1024 1400x1050 1280x1024-1280x1024 1280x1024"
EndSubSection
EndSection
Section "DRI"
# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
Group 0
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enabled"
EndSection
Code: Select all
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xa8100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "MergedFB" "true"
(**) RADEON(0): Option "CRT2HSync" "31.5-80.0"
(**) RADEON(0): Option "CRT2VRefresh" "50-90"
(**) RADEON(0): Option "CRT2Position" "RightOf"
(**) RADEON(0): Option "MetaModes" "1400x1050-1280x1024 1400x1050 1280x1024-1280x1024 1280x1024"
(**) RADEON(0): Option "ColorTiling" "on"
(**) RADEON(0): Option "RenderAccel" "on"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI FireGL M24 GL 3154 (PCIE)" (ChipID = 0x3154)
(--) RADEON(0): Linear framebuffer at 0xc0000000
(II) RADEON(0): PCIE card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.25.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules//libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-0, TMDSType-0, ConnectorType-4
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 1
(II) RADEON(0): EDID data from the display on port 2-----------------------
(II) RADEON(0): Manufacturer: STN Model: 22 Serial#: 1196634425
(II) RADEON(0): Year: 2005 Week: 39
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate Composite
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
(II) RADEON(0): blueX: 0.143 blueY: 0.102 whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: SAMTRON
(II) RADEON(0): Serial No: H9NY973031
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004e8e220039315347
(II) RADEON(0): 270f01036c261e782a6f86a25a4d9424
(II) RADEON(0): 1a4f54bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1e
(II) RADEON(0): 510e000a202020202020000000fc0053
(II) RADEON(0): 414d54524f4e0a2020202020000000ff
(II) RADEON(0): 0048394e593937333033310a2020005d
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- LVDS
Connector -- DVI-D
DAC Type -- Primary
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) RADEON(0): Secondary:
Monitor -- TMDS
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000; xclk=25000
(II) RADEON(0): MergedFB mode forced on.
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): No DDC data available, DDCMode option is dismissed
(II) RADEON(0): Panel ID string: SXGA+ Single (85MHz)
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1400x1050
(II) RADEON(0): Valid mode using on-chip RMX: 1280x1024
(II) RADEON(0): Total number of valid FP mode(s) found: 2
(II) RADEON(0): Validating CRTC2 modes for MergedFB ------------
(II) RADEON(0): Valid Mode from Detailed timing table: 1280x1024
(II) RADEON(0): Valid Mode from standard timing table: 1280x1024
(II) RADEON(0): Valid Mode from standard timing table: 1152x864
(II) RADEON(0): Valid Mode from established timing table: 1280x1024
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 832x624
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 15 mode(s) found.
(II) RADEON(0): Total number of valid DDC mode(s) found: 15
(II) RADEON(0): CRT2 Monitor: Using hsync range of 31.50-80.00 kHz
(II) RADEON(0): CRT2 Monitor: Using vrefresh range of 50.00-90.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "640x350" (mode clock too high)
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (mode clock too high)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x400" (mode clock too high)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (mode clock too high)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (mode clock too high)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (mode clock too high)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (mode clock too high)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (mode clock too high)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (mode clock too high)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (mode clock too high)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (mode clock too high)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (mode clock too high)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "832x624" (mode clock too high)
(II) RADEON(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x768" (mode clock too high)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (mode clock too high)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1024" (mode clock too high)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) RADEON(0): Mode pool is empty
(EE) RADEON(0): No valid mode found for this DFP/LCD
(EE) RADEON(0): No valid mode found for CRTC2, disabling MergedFB
(II) RADEON(0): Total of 0 CRTC2 modes found for MergedFB------------
(--) RADEON(0): Virtual size is 1400x1050 (pitch 1408)
(**) RADEON(0): *Mode "1400x1050": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "1400x1050" 84.96 1400 1432 1496 1600 1050 1051 1052 1062
(**) RADEON(0): *Mode "1280x1024": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "1280x1024" 84.96 1280 1432 1496 1600 1024 1051 1052 1062
(**) RADEON(0): Default mode "640x350": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "640x350" 84.96 640 1432 1496 1600 350 1051 1052 1062
(**) RADEON(0): Default mode "640x400": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "640x400" 84.96 640 1432 1496 1600 400 1051 1052 1062
(**) RADEON(0): Default mode "720x400": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "720x400" 84.96 720 1432 1496 1600 400 1051 1052 1062
(**) RADEON(0): Default mode "640x480": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "640x480" 84.96 640 1432 1496 1600 480 1051 1052 1062
(**) RADEON(0): Default mode "800x600": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "800x600" 84.96 800 1432 1496 1600 600 1051 1052 1062
(**) RADEON(0): Default mode "1024x768": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "1024x768" 84.96 1024 1432 1496 1600 768 1051 1052 1062
(**) RADEON(0): Default mode "1152x864": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "1152x864" 84.96 1152 1432 1496 1600 864 1051 1052 1062
(**) RADEON(0): Default mode "1280x960": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "1280x960" 84.96 1280 1432 1496 1600 960 1051 1052 1062
(**) RADEON(0): Default mode "832x624": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "832x624" 84.96 832 1432 1496 1600 624 1051 1052 1062
(**) RADEON(0): Default mode "1152x768": 85.0 MHz (scaled from 0.0 MHz), 53.1 kHz, 50.0 Hz
(II) RADEON(0): Modeline "1152x768" 84.96 1152 1432 1496 1600 768 1051 1052 1062
(**) RADEON(0): Display dimensions: (418, 314) mm
(**) RADEON(0): DPI set to (85, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xa8100000 - 0xa810ffff (0x10000) MX[B]
[1] 0 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xa8401000 - 0xa8401fff (0x1000) MX[B]
[7] -1 0 0xa8200000 - 0xa820ffff (0x10000) MX[B]
[8] -1 0 0xa8000400 - 0xa80004ff (0x100) MX[B]
[9] -1 0 0xa8000800 - 0xa80009ff (0x200) MX[B]
[10] -1 0 0xa8000000 - 0xa80003ff (0x400) MX[B]
[11] -1 0 0xa8100000 - 0xa810ffff (0x10000) MX[B](B)
[12] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[16] 0 0 0x00003000 - 0x000030ff (0x100) IX[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[20] -1 0 0x000018c0 - 0x000018cf (0x10) IX[B]
[21] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[23] -1 0 0x00001880 - 0x000018bf (0x40) IX[B]
[24] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[25] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[26] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[27] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[28] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[29] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit c0000000 0
(**) RADEON(0): Map: 0xc0000000, 0x08000000
(==) RADEON(0): Write-combining range (0xc0000000,0x8000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x81f0f18)
(**) RADEON(0): Read: 0x00180006 0x00040039 0x00000000
(**) RADEON(0): Read: rd=6, fd=57, pd=4
(**) RADEON(0): RADEONSaveMode returns 0x81f0f18
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf887b000
(II) RADEON(0): [drm] mapped SAREA 0xf887b000 to 0xb7bac000
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [pci] 8192 kB allocated with handle 0xf95f1000
(II) RADEON(0): [pci] ring handle = 0xf95f1000
(II) RADEON(0): [pci] Ring mapped at 0xaf97b000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf96f2000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xaf97a000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/in(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaf77a000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf98f3000
(II) RADEON(0): [pci] GART Texture map mapped at 0xaf29a000
(II) RADEON(0): [drm] register handle = 0xa8100000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x08000000
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1400x1050 84.96 1400 1432 1496 1600 1050 1051 1052 1062 (24,32)
1400x1050 84.96 1400 1432 1496 1600 1050 1051 1052 1062 (24,32)
(**) RADEON(0): Pitch = 11534512 bytes (virtualX = 1400, displayWidth = 1408)
(II) RADEON(0): BIOS HotKeys Disabled
(**) RADEON(0): RADEONInit returns 0x81f18c8
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81f18c8)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20197c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1058)
(II) RADEON(0): Largest offscreen area available: 1408 x 7133
(II) RADEON(0): Will use back buffer at offset 0x1894000
(II) RADEON(0): Will use depth buffer at offset 0x1e40000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x7ff8000
(II) RADEON(0): Will use 94208 kb for textures at offset 0x23ec000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI PCIGART param
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 176
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
direct buffers handle = 0xf96f3000
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1058)
(II) RADEON(0): Largest offscreen area available: 1408 x 7130
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Option "AllowGLXWithComposite" is not used
(WW) RADEON(0): Option "DRI" is not used
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: &
