[CUPS]wersja 1.2.2 i same problemy, drukarka hp845c-zadalna

[psotnik]

Witam, CUPS mnie rozkłada, coś mnie podkusiło aby zinstalować nowszą wersje, a było lepsze jest wrogiem dobrego

Code: Select all

# emerge -pv cups

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild     UD] net-print/cups-1.1.23-r8 [1.2.2] USE="nls pam ssl -gnutls% -samba -slp" 0 kB

Total size of downloads: 0 kB

Teraz mam same problemy. Do mini serverka podpięta jest drukarka

Code: Select all

# lsusb
Bus 001 Device 009: ID 03f0:0904 Hewlett-Packard DeskJet 845c
Bus 001 Device 002: ID 03eb:7605 Atmel Corp. at76c503a 802.11b Adapter
Bus 001 Device 001: ID 0000:0000

Zawsze ją konfigurowałem przez interfejs www CUPSa, ale teraz za nic nie mogę się połączyć do podstron konfiguracji, wymagany jest przez CUPSa protokół https np http://10.0.0.1:631/admin/ tyle tylko, że zadną przegladarką nie moge się połączyć, z flaga USE=-ssl jet to samo, potem etc-update usuwa Encrypte cos tam, juz nie pamiętam dokładnie, może bylo by to i mało istotne bo drukarka była skonfigurowana i drukowała w miare dobrze, ale teraz przestała, zachowuje się całkowicie dla mnie nie zrozumiale.

# cat /var/log/cups/error_log|tail -n 50
D [21/Aug/2006:21:09:47 +0200] cupsdSendError: 8 code=400 (Bad Request)
D [21/Aug/2006:21:09:47 +0200] cupsdCloseClient: 8
D [21/Aug/2006:21:09:47 +0200] cupsdAcceptClient: 7 from 10.0.0.2:631 (IPv4)
D [21/Aug/2006:21:09:47 +0200] cupsdAcceptClient: 8 from 10.0.0.2:631 (IPv4)
I [21/Aug/2006:21:09:47 +0200] Generating SSL server key and certificate...
E [21/Aug/2006:21:09:48 +0200] Unable to create SSL server key and certificate - the openssl command stopped with status 1!
E [21/Aug/2006:21:09:48 +0200] Bad request line "U" from 10.0.0.2!
D [21/Aug/2006:21:09:48 +0200] cupsdSendError: 7 code=400 (Bad Request)
D [21/Aug/2006:21:09:48 +0200] cupsdCloseClient: 7
I [21/Aug/2006:21:09:48 +0200] Generating SSL server key and certificate...
E [21/Aug/2006:21:09:48 +0200] Unable to create SSL server key and certificate - the openssl command stopped with status 1!
E [21/Aug/2006:21:09:48 +0200] Bad request line "U" from 10.0.0.2!
D [21/Aug/2006:21:09:48 +0200] cupsdSendError: 8 code=400 (Bad Request)
D [21/Aug/2006:21:09:48 +0200] cupsdCloseClient: 8
D [21/Aug/2006:21:09:48 +0200] cupsdAcceptClient: 7 from 10.0.0.2:631 (IPv4)
D [21/Aug/2006:21:09:48 +0200] cupsdAcceptClient: 8 from 10.0.0.2:631 (IPv4)
I [21/Aug/2006:21:09:48 +0200] Generating SSL server key and certificate...
E [21/Aug/2006:21:09:48 +0200] Unable to create SSL server key and certificate - the openssl command stopped with status 1!
E [21/Aug/2006:21:09:48 +0200] Bad request line "U" from 10.0.0.2!
D [21/Aug/2006:21:09:48 +0200] cupsdSendError: 7 code=400 (Bad Request)
D [21/Aug/2006:21:09:48 +0200] cupsdCloseClient: 7
I [21/Aug/2006:21:09:49 +0200] Generating SSL server key and certificate...
E [21/Aug/2006:21:09:49 +0200] Unable to create SSL server key and certificate - the openssl command stopped with status 1!
E [21/Aug/2006:21:09:49 +0200] Bad request line "U" from 10.0.0.2!
D [21/Aug/2006:21:09:49 +0200] cupsdSendError: 8 code=400 (Bad Request)
D [21/Aug/2006:21:09:49 +0200] cupsdCloseClient: 8
D [21/Aug/2006:21:09:49 +0200] cupsdAcceptClient: 7 from 10.0.0.2:631 (IPv4)
D [21/Aug/2006:21:09:49 +0200] cupsdAcceptClient: 8 from 10.0.0.2:631 (IPv4)
I [21/Aug/2006:21:09:49 +0200] Generating SSL server key and certificate...
E [21/Aug/2006:21:09:50 +0200] Unable to create SSL server key and certificate - the openssl command stopped with status 1!
E [21/Aug/2006:21:09:50 +0200] Bad request line "U" from 10.0.0.2!
D [21/Aug/2006:21:09:50 +0200] cupsdSendError: 7 code=400 (Bad Request)
D [21/Aug/2006:21:09:50 +0200] cupsdCloseClient: 7
I [21/Aug/2006:21:09:50 +0200] Generating SSL server key and certificate...
E [21/Aug/2006:21:09:50 +0200] Unable to create SSL server key and certificate - the openssl command stopped with status 1!
E [21/Aug/2006:21:09:50 +0200] Bad request line "U" from 10.0.0.2!
D [21/Aug/2006:21:09:50 +0200] cupsdSendError: 8 code=400 (Bad Request)
D [21/Aug/2006:21:09:50 +0200] cupsdCloseClient: 8
D [21/Aug/2006:21:09:50 +0200] cupsdAcceptClient: 7 from 10.0.0.2:631 (IPv4)
D [21/Aug/2006:21:09:50 +0200] cupsdAcceptClient: 8 from 10.0.0.2:631 (IPv4)
I [21/Aug/2006:21:09:50 +0200] Generating SSL server key and certificate...
E [21/Aug/2006:21:09:51 +0200] Unable to create SSL server key and certificate - the openssl command stopped with status 1!
E [21/Aug/2006:21:09:51 +0200] Bad request line "U" from 10.0.0.2!
D [21/Aug/2006:21:09:51 +0200] cupsdSendError: 7 code=400 (Bad Request)
D [21/Aug/2006:21:09:51 +0200] cupsdCloseClient: 7
D [21/Aug/2006:21:09:51 +0200] cupsdCloseClient: 8
D [21/Aug/2006:21:11:39 +0200] cupsdCloseClient: 15
D [21/Aug/2006:21:11:39 +0200] cupsdCloseClient: 13
D [21/Aug/2006:21:11:39 +0200] cupsdCloseClient: 17
D [21/Aug/2006:21:11:39 +0200] cupsdCloseClient: 12

To przy próbie łączenie się, i co mam zrobić z tymi certyfikatami??

A przy próbie drukowania ze zdalnego hosta dosteje coś takiego

Code: Select all

cat /var/log/cups/error_log|tail -n 20
D [21/Aug/2006:21:24:49 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [21/Aug/2006:21:24:49 +0200] cupsdReadClient: 7 POST / HTTP/1.1
D [21/Aug/2006:21:24:49 +0200] cupsdAuthorize: No authentication data provided.
D [21/Aug/2006:21:24:49 +0200] CUPS-Get-Default
D [21/Aug/2006:21:24:49 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [21/Aug/2006:21:24:49 +0200] cupsdCloseClient: 7
D [21/Aug/2006:21:24:49 +0200] cupsdAcceptClient: 7 from 10.0.0.2:631 (IPv4)
D [21/Aug/2006:21:24:49 +0200] cupsdReadClient: 7 POST /printers/hp845c HTTP/1.1
D [21/Aug/2006:21:24:49 +0200] cupsdAuthorize: No authentication data provided.
D [21/Aug/2006:21:24:49 +0200] Print-Job ipp://localhost/printers/hp845c
D [21/Aug/2006:21:24:49 +0200] print_job: auto-typing file...
D [21/Aug/2006:21:24:49 +0200] print_job: request file type is text/plain.
D [21/Aug/2006:21:24:49 +0200] add_job: requesting-user-name="dmnk"
I [21/Aug/2006:21:24:49 +0200] Adding start banner page "none" to job 17.
D [21/Aug/2006:21:24:49 +0200] Discarding unused job-created event...
I [21/Aug/2006:21:24:49 +0200] Adding end banner page "none" to job 17.
I [21/Aug/2006:21:24:49 +0200] Job 17 queued on "hp845c" by "dmnk".
D [21/Aug/2006:21:24:49 +0200] Job 17 hold_until = 0
D [21/Aug/2006:21:24:49 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [21/Aug/2006:21:24:49 +0200] cupsdCloseClient: 7

Lokalnie zresztą to samo

Code: Select all

cat /var/log/cups/error_log|tail -n 20
D [21/Aug/2006:21:25:42 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [21/Aug/2006:21:25:42 +0200] cupsdReadClient: 7 POST / HTTP/1.1
D [21/Aug/2006:21:25:42 +0200] cupsdAuthorize: No authentication data provided.
D [21/Aug/2006:21:25:42 +0200] CUPS-Get-Default
D [21/Aug/2006:21:25:42 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [21/Aug/2006:21:25:42 +0200] cupsdCloseClient: 7
D [21/Aug/2006:21:25:42 +0200] cupsdAcceptClient: 7 from localhost (Domain)
D [21/Aug/2006:21:25:42 +0200] cupsdReadClient: 7 POST /printers/hp845c HTTP/1.1
D [21/Aug/2006:21:25:42 +0200] cupsdAuthorize: No authentication data provided.
D [21/Aug/2006:21:25:42 +0200] Print-Job ipp://localhost/printers/hp845c
D [21/Aug/2006:21:25:42 +0200] print_job: auto-typing file...
D [21/Aug/2006:21:25:42 +0200] print_job: request file type is text/plain.
D [21/Aug/2006:21:25:42 +0200] add_job: requesting-user-name="root"
I [21/Aug/2006:21:25:42 +0200] Adding start banner page "none" to job 18.
D [21/Aug/2006:21:25:42 +0200] Discarding unused job-created event...
I [21/Aug/2006:21:25:42 +0200] Adding end banner page "none" to job 18.
I [21/Aug/2006:21:25:42 +0200] Job 18 queued on "hp845c" by "root".
D [21/Aug/2006:21:25:42 +0200] Job 18 hold_until = 0
D [21/Aug/2006:21:25:42 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
D [21/Aug/2006:21:25:42 +0200] cupsdCloseClient: 7

Jak na moje oko newbe to wyglada wporządku tylko dlaczego drukarka nie ożywa
Ta samą wersje CUPSa zinstalowałem na lokalnej maszynie i tak dziła OK, ale ja to potrzebuje miec na serwerku,
Na forumch arch linuxa było ze są jakies problemy z linia 1,2,x CUPSa. Jak mój problem widziecie??

[Raku]

Moved from Polish to Instalacja i sprzęt.

[deluge]

Też po którejś aktualizacji przestało mi cups działać. Problem rozwiązałem przez zainstalowanie hplip + /etc/init.d/hplip start oraz usuniecie drukarki i dodanie jej ponownie przez interfejs www cupsa.

[psotnik]

nie pomaga