Tuli ongelmaa mga moduulin kanssa. Kun yritän ladata moduulia, saan herjan:
Code: Select all
FATAL: Error inserting mga (/lib/modules/2.6.15-gentoo-r1/x11-drm/mga.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Code: Select all
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 01 f0 00 00 28 00
usb-storage: Bulk Command S 0x43425355 T 0x15 L 20480 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 20480 bytes, 5 entries
usb-storage: Status code 0; transferred 20480/20480
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1 across:506036k
EXT3 FS on hda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[drm] Initialized drm 1.0.0 20040925
mga: Unknown symbol pci_pretty_name
