failed to emerge gcc (problem with patch)

[phoenix_me]

When I am trying to emerge gcc it fails due to errors while applying patches:

Code: Select all

emerge -v gcc
Calculating dependencies   .....done!
>>> emerge (1 of 1) sys-devel/gcc-3.4.4-r1 to /
>>> md5 files   ;-) gcc-3.3.5.20050130-r2.ebuild
>>> md5 files   ;-) gcc-3.4.3-r1.ebuild
>>> md5 files   ;-) gcc-3.2.3-r4.ebuild
>>> md5 files   ;-) gcc-3.3.5-r1.ebuild
>>> md5 files   ;-) gcc-3.1.1-r2.ebuild
>>> md5 files   ;-) gcc-4.1.0_beta20051230.ebuild
>>> md5 files   ;-) gcc-3.4.3.20050110-r2.ebuild
>>> md5 files   ;-) gcc-3.3.2-r7.ebuild
>>> md5 files   ;-) gcc-2.95.3-r9.ebuild
>>> md5 files   ;-) gcc-3.2.2.ebuild
>>> md5 files   ;-) gcc-3.3.6.ebuild
>>> md5 files   ;-) gcc-3.4.5.ebuild
>>> md5 files   ;-) gcc-3.4.4-r1.ebuild
>>> md5 files   ;-) gcc-4.0.1.ebuild
>>> md5 files   ;-) gcc-3.3.5.20050130-r1.ebuild
>>> md5 files   ;-) gcc-3.4.1-r3.ebuild
>>> md5 files   ;-) gcc-4.0.2-r2.ebuild
>>> md5 files   ;-) files/mkinfodir
>>> md5 files   ;-) files/digest-gcc-3.4.3-r1
>>> md5 files   ;-) files/digest-gcc-3.2.3-r4
>>> md5 files   ;-) files/digest-gcc-3.3.5-r1
>>> md5 files   ;-) files/digest-gcc-3.3.5.20050130-r2
>>> md5 files   ;-) files/digest-gcc-3.4.3.20050110-r2
>>> md5 files   ;-) files/digest-gcc-4.1.0_beta20051230
>>> md5 files   ;-) files/digest-gcc-3.3.2-r7
>>> md5 files   ;-) files/digest-gcc-3.1.1-r2
>>> md5 files   ;-) files/digest-gcc-3.3.5.20050130-r1
>>> md5 files   ;-) files/gcc-configure-LANG.patch
>>> md5 files   ;-) files/digest-gcc-2.95.3-r9
>>> md5 files   ;-) files/digest-gcc-3.4.1-r3
>>> md5 files   ;-) files/digest-gcc-3.2.2
>>> md5 files   ;-) files/digest-gcc-3.3.6
>>> md5 files   ;-) files/fix_libtool_files.sh
>>> md5 files   ;-) files/gcc-spec-env.patch
>>> md5 files   ;-) files/gcc331_use_multilib.amd64.patch
>>> md5 files   ;-) files/pro-police-docs.patch
>>> md5 files   ;-) files/scan_libgcc_linked_ssp.sh
>>> md5 files   ;-) files/digest-gcc-3.4.4-r1
>>> md5 files   ;-) files/digest-gcc-3.4.5
>>> md5 files   ;-) files/digest-gcc-4.0.1
>>> md5 files   ;-) files/digest-gcc-4.0.2-r2
>>> md5 files   ;-) files/3.3.6/gcc-3.3.6-cross-compile.patch
>>> md5 files   ;-) files/3.2.1/gcc31-loop-load-final-value.patch
>>> md5 files   ;-) files/3.2.1/gcc32-arm-disable-mathf.patch
>>> md5 files   ;-) files/3.2.1/gcc32-arm-reload1-fix.patch
>>> md5 files   ;-) files/3.2.1/gcc32-athlon-alignment.patch
>>> md5 files   ;-) files/3.2.1/gcc32-sparc32-hack.patch
>>> md5 files   ;-) files/3.2.1/gcc32-strip-dotdot.patch
>>> md5 files   ;-) files/3.2.2/gcc32-pr7768.patch
>>> md5 files   ;-) files/3.2.2/gcc32-pr8213.patch
>>> md5 files   ;-) files/3.2.2/gcc-3.2.2-no-COPYING-cross-compile.patch
>>> md5 files   ;-) files/3.2.2/gcc322-ggc_page-speedup.patch
>>> md5 files   ;-) files/3.2.2/gcc-3.2.2-cross-compile.patch
>>> md5 files   ;-) files/3.2.3/gcc-323-propolice-version.patch
>>> md5 files   ;-) files/3.2.3/gcc-3.2.3-mergel-fix.patch
>>> md5 files   ;-) files/3.2.3/gcc323-hppa-default_assemble_visibility.patch
>>> md5 files   ;-) files/3.2.3/gcc-3.2.3-move-propolice-into-glibc.patch
>>> md5 files   ;-) files/3.2.3/gcc32-c++-classfn-member-template.patch
>>> md5 files   ;-) files/3.2.3/gcc32-mklibgcc-serialize-crtfiles.patch
>>> md5 files   ;-) files/3.2.3/gcc323-gentoo-branding.patch
>>> md5 files   ;-) files/3.3.1/gcc331-pp-fixup.patch
>>> md5 files   ;-) files/3.3.2/gcc332-gentoo-branding.patch
>>> md5 files   ;-) files/3.3.2/gcc332-altivec-fix.patch
>>> md5 files   ;-) files/3.3.3/gcc-3.3.3-norelro.patch
>>> md5 files   ;-) files/3.3.3/gcc-3.3.3-uclibc-add-ssp.patch
>>> md5 files   ;-) files/3.3.3/gcc-uclibc-3.3-loop.patch
>>> md5 files   ;-) files/3.3.3/gcc333-debian-arm-getoff.patch
>>> md5 files   ;-) files/3.3.3/gcc333-debian-arm-ldm.patch
>>> md5 files   ;-) files/3.3.3/gcc333_pre20040408-stack-size.patch
>>> md5 files   ;-) files/3.3.4/libffi-without-libgcj.patch
>>> md5 files   ;-) files/3.4.0/gcc-3.4.0-cc1-no-stack-protector.patch
>>> md5 files   ;-) files/3.4.0/gcc34-reiser4-fix.patch
>>> md5 files   ;-) files/3.4.1/gcc-3.4.1-r2-gentoo-branding.patch
>>> md5 files   ;-) files/3.4.1/gcc-3.4.1-glibc-is-native.patch
>>> md5 files   ;-) files/3.4.1/gcc-3.4.1-mips-n32only.patch
>>> md5 files   ;-) files/3.4.1/gcc-3.4.1-mips-n64only.patch
>>> Unpacking source...
>>> Unpacking gcc-3.4.4.tar.bz2 to /var/tmp/portage/gcc-3.4.4-r1/work
>>> Unpacking gcc-3.4.4-patches-1.7.tar.bz2 to /var/tmp/portage/gcc-3.4.4-r1/work
>>> Unpacking gcc-3.4.4-uclibc-patches-1.2.tar.bz2 to /var/tmp/portage/gcc-3.4.4-r1/work
>>> Unpacking gcc-3.4.4-ssp-1.0.tar.bz2 to /var/tmp/portage/gcc-3.4.4-r1/work
>>> Unpacking gcc-3.4.4-piepatches-v8.7.8.tar.bz2 to /var/tmp/portage/gcc-3.4.4-r1/work
Applying stub patch for htb ...
[OK]
Applying gcc-3.4.4-ssp.patch ...
[OK]
Updating gcc to use SSP from libc ...
[OK]
Applying upstream pie patches ...
[OK]
00_all_gcc-4.0-cvs-incompat.patch.bz2 ...
[OK]
00_all_gcc-4.0-cvs-mips-pic-for-3.4.3.patch.bz2 ...
[OK]
00_all_gcc-4.0-cvs-pic.patch.bz2 ...
[OK]
00_all_gcc-4.0-cvs-start_endfile-for-3.4.4.patch.bz2 ...
[OK]
03_all_gcc-3.4.0-v8.7.6.1-pie-arm.patch.bz2 ...
[OK]
04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 ...

Failed Patch: 04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 !
( /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch )

Include in your bugreport the contents of:
/var/tmp/portage/gcc-3.4.4-r1/temp/04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2-19451.out

And below the context of 04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2-19451.out

Code: Select all

***** 04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 *****

==============================================================

PIPE_COMMAND:  bzip2 -dc /var/tmp/portage/gcc-3.4.4-r1/work/piepatch/upstream/04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 > /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch
PATCH COMMAND:  patch -p0 -g0 --no-backup-if-mismatch < /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch

==============================================================
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- gcc-3.4.0/gcc/config/arm/linux-elf.h.mps	Thu May 20 09:11:17 2004
|+++ gcc-3.4.0/gcc/config/arm/linux-elf.h	Thu May 20 09:12:28 2004
--------------------------
No file to patch.  Skipping patch.
1 out of 1 hunk ignored
==============================================================

PIPE_COMMAND:  bzip2 -dc /var/tmp/portage/gcc-3.4.4-r1/work/piepatch/upstream/04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 > /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch
PATCH COMMAND:  patch -p1 -g0 --no-backup-if-mismatch < /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch

==============================================================
patching file gcc/config/arm/linux-elf.h
Hunk #1 FAILED at 91.
1 out of 1 hunk FAILED -- saving rejects to file gcc/config/arm/linux-elf.h.rej
==============================================================

PIPE_COMMAND:  bzip2 -dc /var/tmp/portage/gcc-3.4.4-r1/work/piepatch/upstream/04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 > /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch
PATCH COMMAND:  patch -p2 -g0 --no-backup-if-mismatch < /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch

==============================================================
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- gcc-3.4.0/gcc/config/arm/linux-elf.h.mps	Thu May 20 09:11:17 2004
|+++ gcc-3.4.0/gcc/config/arm/linux-elf.h	Thu May 20 09:12:28 2004
--------------------------
No file to patch.  Skipping patch.
1 out of 1 hunk ignored
==============================================================

PIPE_COMMAND:  bzip2 -dc /var/tmp/portage/gcc-3.4.4-r1/work/piepatch/upstream/04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 > /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch
PATCH COMMAND:  patch -p3 -g0 --no-backup-if-mismatch < /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch

==============================================================
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- gcc-3.4.0/gcc/config/arm/linux-elf.h.mps	Thu May 20 09:11:17 2004
|+++ gcc-3.4.0/gcc/config/arm/linux-elf.h	Thu May 20 09:12:28 2004
--------------------------
No file to patch.  Skipping patch.
1 out of 1 hunk ignored
==============================================================

PIPE_COMMAND:  bzip2 -dc /var/tmp/portage/gcc-3.4.4-r1/work/piepatch/upstream/04_all_gcc-3.4.0-v8.7.6.1-pie-arm-uclibc.patch.bz2 > /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch
PATCH COMMAND:  patch -p4 -g0 --no-backup-if-mismatch < /var/tmp/portage/gcc-3.4.4-r1/temp/19451.patch

==============================================================
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- gcc-3.4.0/gcc/config/arm/linux-elf.h.mps	Thu May 20 09:11:17 2004
|+++ gcc-3.4.0/gcc/config/arm/linux-elf.h	Thu May 20 09:12:28 2004
--------------------------
No file to patch.  Skipping patch.
1 out of 1 hunk ignored 

It seems like bug in ebuild for me. Any suggestions ?.

I create a new bug on bugzilla,
http://bugs.gentoo.org/show_bug.cgi?id=117336

[nxsty]

This shouldn't happend. Check your filesystem, sync portage and try again!

[phoenix_me]

This shouldn't happend. Check your filesystem, sync portage and try again!

I was already trying to do
emerge sync
but error still exist.
I was trying also emerge the other version of gcc (4.0.1 4.0.2) and i have same error with them. It fails while applying the pie-arm-uclibc patch.
I am not sure but maybe problem was because of changing profile from 2004.x to 2005.1.

[Why-Not]

I've got the same problem with the same error messages.

[drakonite]

Apparently the vanilla use flag was turned on on my system, and the description of it insists almost entirely of a warning not to turn it on for system wide use... no idea how it would have gotten turned on, as I don't remember it at all...

Removing the use flag causes gcc to build correctly.

[mayday07]

Indeed !!

i had the same problem.
removing vanilla flag solved it. THANKS

just add:
sys-devel/gcc -vanilla

to /etc/portage/package.use