Alsa on N-Force 4 (Asus A8N-SLI Deluxe) [SOLVED]

Message

TheLegend81 · Post by **TheLegend81** » Wed Oct 05, 2005 4:49 pm

hello:

I'm trying to get Alsa to work with my Asus A8n-SLI deluxe mobo.

I've gone with the http://www.gentoo.org/doc/en/alsa-guide.xml documentation--the path that compiles support into the kernel and when it runs modules-update, I get errors. after stopping and then starting alsa-sound, I get the following output.

Code: Select all

/etc/init.d/alsasound start
 * Loading ALSA modules ...
 *   Loading: snd-card-0 ...                                              [ ok ]
 *   Loading: snd-pcm-oss ...
WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                      [ !! ]
 *   Loading: snd-mixer-oss ...
FATAL: Error inserting snd_mixer_oss (/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                  [ !! ]
 *   Loading: snd-seq ...                                                 [ ok ]
 * ERROR: Failed to load necessary drivers                                [ ok ]
 * Restoring Mixer Levels ...                                             [ ok ]

dmesg reports the following

Code: Select all

Bootdata ok (command line is root=/dev/sdb5 video=nvidiafb:mtrr,ywrap,1280x1024-
24@70)
Linux version 2.6.12-gentoo-r10 (root@livecd) (gcc version 3.4.3 20041125 (Gento
o 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #4 SMP Sun Oct 2 23:55:00 Local time zone m
ust be set--see zic m
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f7de0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff304
0
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c
0
ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x000000003fff990
0
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9a0
0
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff984
0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x000000000000000
0
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: Node 0 PXM 0 0-9ffff
SRAT: Node 0 PXM 0 0-3fffffff
Bootmem setup node 0 0000000000000000-000000003ffeffff
On node 0 totalpages: 262127
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 258031 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:7 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Checking aperture...
CPU 0: aperture @ 3b02000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/sdb5 video=nvidiafb:mtrr,ywrap,1280x1024-24@70
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2211.359 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1023988k/1048512k available (3291k kernel code, 0k reserved, 1827k data,
 236k init)
Calibrating delay loop... 4374.52 BogoMIPS (lpj=2187264)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(1) -> Node 0 -> Core 0
Using local APIC timer interrupts.
Detected 12.564 MHz APIC timer.
Brought up 1 CPUs
time.c: Using PIT/TSC based timekeeping.
testing NMI watchdog ... OK.
CPU0 attaching sched-domain:
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4800-0x487f has been reserved
pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.22 [Flags: R/W].
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
Copyright (c) 1999-2004 Intel Corporation.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ
 217
PCI: Setting latency timer of device 0000:00:0a.0 to 64
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
netconsole: not configured, aborting
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SONY CD-RW CRX230EE, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 40X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.11 loaded.
sata_sil version 0.9
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ
 225
ata1: SATA max UDMA/100 cmd 0xFFFFC20000004080 ctl 0xFFFFC2000000408A bmdma 0xFF
FFC20000004000 irq 225
ata2: SATA max UDMA/100 cmd 0xFFFFC200000040C0 ctl 0xFFFFC200000040CA bmdma 0xFF
FFC20000004008 irq 225
ata3: SATA max UDMA/100 cmd 0xFFFFC20000004280 ctl 0xFFFFC2000000428A bmdma 0xFF
FFC20000004200 irq 225
ata4: SATA max UDMA/100 cmd 0xFFFFC200000042C0 ctl 0xFFFFC200000042CA bmdma 0xFF
FFC20000004208 irq 225
ata1: no device found (phy stat 00000000)
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
ata3: no device found (phy stat 00000000)
scsi2 : sata_sil
ata4: no device found (phy stat 00000000)
scsi3 : sata_sil
sata_nv version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ
 233
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata5: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 233
ata6: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 233
ata5: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:101f
ata5: dev 0 ATAPI, max UDMA/66
ata5(0): applying bridge limits
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata5: dev 0 configured for UDMA/66
scsi4 : sata_nv
ata6: no device found (phy stat 00000000)
scsi5 : sata_nv
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ
 50
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata7: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 50
ata8: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 50
ata7: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:407f
ata7: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata7: dev 0 configured for UDMA/133
scsi6 : sata_nv
ata8: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:407f
ata8: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata8: dev 0 configured for UDMA/133
scsi7 : sata_nv
  Vendor: ATA       Model: ST3160827AS       Rev: 3.42
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3160827AS       Rev: 3.42
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2
Attached scsi disk sda at scsi6, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
Attached scsi disk sdb at scsi7, channel 0, id 0, lun 0
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ
 58
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: irq 58, io mem 0xfeb00000
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ
 217
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 217, io mem 0xd5004000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v2.2
Initializing USB Mass Storage driver...
usb 1-3: new high speed USB device using ehci_hcd and address 4
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-2: new low speed USB device using ohci_hcd and address 3
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02
.0-2
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-
2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver xpad
drivers/usb/input/xpad.c: X-Box pad driver:v0.0.5
i2c /dev entries driver
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
ACPI wakeup devices:
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
ACPI: (supports S0 S1 S3 S4 S5)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding 2597996k swap on /dev/sdb2.  Priority:-1 extents:1
EXT3 FS on sdb5, internal journal
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ
 66
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-6629  Wed Nov  3 11:
43:48 PST 2004
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
wlan: 0.8.4.5 (EXPERIMENTAL)
ath_rate_onoe: 1.0
ath_pci: 0.9.4.12 (EXPERIMENTAL)
  Vendor: ST910082  Model: 3A                Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 00
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ
 74
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36M
bps 48Mbps 54Mbps
ath0: mac 7.9 phy 4.5 radio 5.6
ath0: 802.11 address: 00:0f:b5:88:0c:5e
ath0: Use hw queue 0 for WME_AC_BE traffic
ath0: Use hw queue 1 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Atheros 5212: mem=0xd4000000, irq=74
ath_rate_amrr: 0.1
SCSI device sdc: 195371568 512-byte hdwr sectors (100030 MB)
sdc: assuming drive cache: write through
SCSI device sdc: 195371568 512-byte hdwr sectors (100030 MB)
sdc: assuming drive cache: write through
 sdc:<6>kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
 sdc1
Attached scsi disk sdc at scsi8, channel 0, id 0, lun 0
usb-storage: device scan complete
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_timer_new
snd_pcm_oss: Unknown symbol snd_pcm_lib_read
snd_pcm_oss: Unknown symbol snd_pcm_hw_constraints_init
snd_pcm_oss: Unknown symbol _snd_pcm_hw_param_setinteger
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_near
snd_pcm_oss: Unknown symbol snd_pcm_kernel_ioctl
snd_pcm_oss: Unknown symbol snd_pcm_stop
snd_pcm_oss: Unknown symbol snd_pcm_format_unsigned
snd_pcm_oss: Unknown symbol _snd_pcm_hw_params_any
snd_pcm_oss: Unknown symbol snd_pcm_format_physical_width
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value_max
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_set
snd_pcm_oss: Unknown symbol snd_pcm_format_silence_64
snd_pcm_oss: Unknown symbol snd_pcm_open_substream
snd_pcm_oss: Unknown symbol snd_pcm_lib_readv
snd_pcm_oss: Unknown symbol _snd_pcm_hw_param_set
snd_pcm_oss: Unknown symbol snd_pcm_kernel_capture_ioctl
snd_pcm_oss: Unknown symbol snd_pcm_lib_writev
snd_pcm_oss: Unknown symbol _snd_pcm_hw_param_min
snd_pcm_oss: Unknown symbol snd_pcm_format_linear
snd_pcm_oss: Unknown symbol snd_pcm_mmap_data
snd_pcm_oss: Unknown symbol snd_pcm_devices
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value_min
snd_pcm_oss: Unknown symbol snd_pcm_build_linear_format
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_mask
snd_pcm_oss: Unknown symbol snd_pcm_format_signed
snd_pcm_oss: Unknown symbol snd_pcm_hw_constraints_complete
snd_pcm_oss: Unknown symbol snd_pcm_link_rwlock
snd_pcm_oss: Unknown symbol snd_pcm_hw_refine
snd_pcm_oss: Unknown symbol snd_pcm_kernel_playback_ioctl
snd_pcm_oss: Unknown symbol snd_pcm_format_big_endian
snd_pcm_oss: Unknown symbol snd_pcm_notify
snd_pcm_oss: Unknown symbol snd_pcm_release_substream
snd_pcm_oss: Unknown symbol snd_pcm_lib_write
snd_pcm_oss: Unknown symbol snd_pcm_format_set_silence
snd_pcm_oss: Unknown symbol snd_pcm_format_width
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_timer_stop
snd_seq: Unknown symbol snd_timer_close
snd_seq: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_timer_open
snd_seq: Unknown symbol snd_timer_start
snd_seq: Unknown symbol snd_timer_resolution
snd_seq: Unknown symbol snd_timer_pause
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_timer_stop
snd_seq: Unknown symbol snd_timer_close
snd_seq: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_timer_open
snd_seq: Unknown symbol snd_timer_start
snd_seq: Unknown symbol snd_timer_resolution
snd_seq: Unknown symbol snd_timer_pause
ath0: no IPv6 routers present
Nvsound: Nvidia Audio Init Module, 10:06:57 Oct  5 2005 version 1.0-6
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ
 233
PCI: Setting latency timer of device 0000:00:04.0 to 64
Nvsound: NVIDIA CK804 Audio aci 0xe000 and ac97 0xdc00, IRQ e9
Nvsound: DEV MIXER 0 DEV AUDIO 3
Nvsound: Audio getting removed ffff810039590380
KERN_INFO Nvsound: Release DEV MIXER 0
Nvsound: Nvidia Audio Init Module, 10:06:57 Oct  5 2005 version 1.0-6
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ
 233
PCI: Setting latency timer of device 0000:00:04.0 to 64
Nvsound: NVIDIA CK804 Audio aci 0xe000 and ac97 0xdc00, IRQ e9
Nvsound: DEV MIXER 0 DEV AUDIO 3
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register

lsmod reports

Code: Select all

Module                  Size  Used by
snd_seq                55200  0
snd_intel8x0           32448  0
snd_ac97_codec         88600  1 snd_intel8x0
snd_pcm                87432  2 snd_intel8x0,snd_ac97_codec
snd_timer              22216  2 snd_seq,snd_pcm
snd                    47320  5 snd_seq,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc          9544  2 snd_intel8x0,snd_pcm
nvsound              1710764  0
soundcore               8608  2 snd,nvsound
wlan_xauth              2176  0
wlan_wep                6464  0
wlan_tkip              11072  0
ath_rate_amrr           8968  0
ath_pci                56360  0
ath_rate_onoe           8912  1 ath_pci
wlan                  106068  7 wlan_xauth,wlan_wep,wlan_tkip,ath_rate_amrr,ath_pci,ath_rate_onoe
ath_hal               170608  2 ath_pci
nvidia               4053116  12

lspci reports

Code: Select all

lspci
0000:00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
0000:00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
0000:00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
0000:00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
0000:00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800 Ultra/GeForce 6800 GT] (rev a2)
0000:05:06.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
0000:05:07.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
0000:05:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)

applicable parts of kernel .config file

Code: Select all

...
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
...

any help would be much appreciated.
TIA,
Chris[/url]

robbyjo · Post by **robbyjo** » Wed Oct 05, 2005 4:53 pm

I think the config should be like this:

Code: Select all

# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=m
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_RTCTIMER=m

(The rest should be the same)
HTH

TheLegend81 · Post by **TheLegend81** » Wed Oct 05, 2005 7:00 pm

thx robbyjo for the reply:

I did as you said, recompiled the kernel, re-emerged what was needed and rebooted the new kernel.

when re/starting the alsasound init script I get

Code: Select all

/etc/init.d/alsasound restart
 * Loading ALSA modules ...
 *   Loading: snd-card-0 ...                                              [ ok ]
 *   Loading: snd-seq-oss ...
FATAL: Error inserting snd_seq_oss (/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/seq/oss/snd-seq-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                  [ !! ]
 *   Loading: snd-pcm-oss ...
WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                      [ !! ]
 *   Loading: snd-mixer-oss ...
FATAL: Error inserting snd_mixer_oss (/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                  [ ok ]
 * Restoring Mixer Levels ...
ALSA lib conf.c:1578:(snd_config_load1) _toplevel_:3:0:Unexpected end of file
/usr/sbin/alsactl: load_state:1221: snd_config_load error: Invalid argum  [ !! ]

however the files:
/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-mixer-oss.ko
/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/oss/snd-pcm-oss.ko
/lib/modules/2.6.12-gentoo-r10/kernel/sound/core/seq/oss/snd-seq-oss.ko
do exist.

this is the contents of my
/etc/modules.d/alsa file

Code: Select all

# Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.co$

# ALSA portion
# OSS/Free portion

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9a ---
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
# --- END: Generated by ALSACONF, do not edit. ---

Note ** I do not know where OSS/Free portion - card #2 came from, I only have the onboard AC'97 sound card.

robbyjo · Post by **robbyjo** » Wed Oct 05, 2005 9:25 pm

OSS modules are provided for backward compatibility. But I think your case is what I had encountered in the past. IIRC I fixed it by compiling everything into the kernel like this:

Code: Select all

# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set

# ... I skipped some stuffs
CONFIG_SND_AC97_CODEC=y

HTH

TheLegend81 · Post by **TheLegend81** » Thu Oct 06, 2005 2:51 am

did you enable oss support? the alsa guide referenced above told me to disable it.

alistair · Post by **alistair** » Thu Oct 06, 2005 11:11 am

Hey ive got a GA-K8N Ultra-SLI nforce4 board

I didnt have any luck at all getting in-kernel sound to work. In fact i dont believe that the drivers can do it at all.

If i were you i would remove ALSA and/or OSS support from your kernel and then do the other path in ALSA doc

also make sure alsa and oss are enabled in your USE flags

as well as emerge -alsa-drivers
do emerge alsa-oss

finish all the install in the doc.

if you are having problems with getting W.M. sound to work

emerge -aN world //see what packages are effected by the USE flags change

ps please tell us if this works

TheLegend81 · Post by **TheLegend81** » Thu Oct 06, 2005 11:56 am

tried it your way-- this is what I get after compiling the kernel with only sound support (but no inkernel alsa or oss support)

Code: Select all

theMan linux # /etc/init.d/alsasound restart
 * Loading ALSA modules ...
 *   Loading: snd-card-0 ...                                              [ ok ]
 *   Loading: snd-pcm-oss ...
WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.12-gentoo-r10/alsa-driver/acore/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.12-gentoo-r10/alsa-driver/acore/oss/snd-pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                      [ !! ]
 *   Loading: snd-mixer-oss ...
FATAL: Error inserting snd_mixer_oss (/lib/modules/2.6.12-gentoo-r10/alsa-driver/acore/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                  [ !! ]
 *   Loading: snd-seq-oss ...
FATAL: Error inserting snd_seq_oss (/lib/modules/2.6.12-gentoo-r10/alsa-driver/acore/seq/oss/snd-seq-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)                                                                  [ ok ]
 * Restoring Mixer Levels ...
ALSA lib conf.c:1578:(snd_config_load1) _toplevel_:3:0:Unexpected end of file
/usr/sbin/alsactl: load_state:1221: snd_config_load error: Invalid argum  [ !! ]

theMan linux # ls /lib/modules/2.6.12-gentoo-r10/alsa-driver/acore/oss/
snd-mixer-oss.ko  snd-pcm-oss.ko
theMan linux #

--- EDIT ---

Rebooted with the new kernel and Wa-Da-TAH! It worked!

Many thanks guys for all your help!

g3n · Post by **g3n** » Thu Oct 20, 2005 9:03 pm

what kernel are you using? are you using alsa-driver, right?
i'm using all what is said in the post with alsa-driver and kernel-2.6.12.5, i have an error loading snd-dummy, but it seems that it loads everything else, and i can turn the volume up with alsamixer but i hear no sound from my soundcard.
what could be causing this? i know the speakers are plugged :-p