Python conflicts and no python-exec wrapped executable found

[direwolf]

So it's been a while since I did a world updates (2 months), and when I tried the typical emerge -Udn @world it was just pages and pages of conflicts and blocks. I go back and try digging through stuff removing things and adjusting use flags, etc., but give up after an hour or so. I just can't get past this.

At this point I'm just trying to at least get Portage to update so I can move on to ripping out what I don't need and putting it back later, but I can't get through even that.

Any suggestions? This is what I'm running into (it's a very long list of conflicts / blocks / masks etc.).

Or am I just doomed?

Code: Select all

# emerge --deep --newuse --oneshot portage -pv

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild     U  ] sec-keys/openpgp-keys-gentoo-release-20230329::gentoo [20220101::gentoo] USE="-test" 17 KiB
[ebuild     U  ] net-dns/c-ares-1.21.0:0/2::gentoo [1.18.1:0/2::gentoo] USE="-static-libs -test -verify-sig%" ABI_X86="(64) -32 (-x32)" 1586 KiB
[ebuild   R    ] dev-lang/python-exec-conf-2.4.6:2::gentoo  PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild  N     ] acct-group/floppy-0-r1::gentoo  0 KiB
[ebuild  N     ] acct-group/usb-0-r2::gentoo  0 KiB
[ebuild     U  ] dev-util/re2c-2.2::gentoo [2.1.1-r1::gentoo] USE="-debug -test%" 1427 KiB
[ebuild   R    ] sys-libs/libseccomp-2.5.4::gentoo  USE="(-experimental-loong) -python -static-libs -test" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_11%* -python3_10 (-python3_9%*)" 0 KiB
[ebuild     U  ] app-arch/xz-utils-5.4.5::gentoo [5.4.1::gentoo] USE="extra-filters nls (split-usr) -doc% -pgo% -static-libs -verify-sig" ABI_X86="(64) -32 (-x32)" 2817 KiB
[ebuild     U  ] dev-libs/libassuan-2.5.6::gentoo [2.5.5::gentoo] USE="-verify-sig%" 564 KiB
[ebuild     U  ] net-misc/rsync-3.2.7-r2::gentoo [3.2.4-r3::gentoo] USE="acl iconv ssl xattr -examples -lz4 -rrsync% -stunnel -system-zlib -verify-sig -xxhash -zstd (-ipv6%*)" PYTHON_SINGLE_TARGET="python3_11%* -python3_10 (-python3_9%*)" 1123 KiB
[ebuild     U  ] sys-kernel/installkernel-gentoo-10::gentoo [5::gentoo] USE="dracut%* -grub -uki% -ukify%" 5 KiB
[ebuild   R    ] dev-libs/libpcre2-10.42-r1:0/3::gentoo  USE="bzip2 jit libedit pcre16 pcre32* (split-usr) unicode zlib -readline -static-libs -valgrind% -verify-sig" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild  N     ] sys-apps/locale-gen-2.23-r1::gentoo  8 KiB
[ebuild     U  ] sys-libs/glibc-2.38-r9:2.2::gentoo [2.36-r5:2.2::gentoo] USE="multiarch (multilib) perl%* ssp stack-realign (static-libs) -audit -caps (-cet) -compile-locales (-crypt) (-custom-cflags) -doc -gd -hash-sysv-compat -headers-only -multilib-bootstrap -nscd -profile (-selinux) -suid -systemd -systemtap -test (-vanilla)" 18526 KiB
[blocks b      ] <sys-libs/glibc-2.37-r3 ("<sys-libs/glibc-2.37-r3" is soft blocking sys-apps/locale-gen-2.23-r1)
[ebuild     U  ] dev-perl/HTTP-Date-6.60.0::gentoo [6.50.0::gentoo] USE="-test%" 31 KiB
[ebuild     U  ] dev-libs/gobject-introspection-common-1.78.1::gentoo [1.74.0::gentoo] 1036 KiB
[ebuild  N     ] app-portage/getuto-1.9.1::gentoo  USE="-test" 10 KiB
[ebuild   R    ] dev-libs/libtasn1-4.19.0:0/6::gentoo  USE="-static-libs -test -verify-sig (-valgrind%)" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild   R    ] dev-util/meson-format-array-0::gentoo  PYTHON_TARGETS="python3_11* -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild     U  ] sys-devel/autoconf-2.71-r6:2.71::gentoo [2.71-r5:2.71::gentoo] USE="-emacs" 0 KiB
[ebuild   R    ] dev-libs/expat-2.5.0::gentoo  USE="unicode -examples -static-libs -test%" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild     U  ] media-libs/alsa-lib-1.2.10-r2::gentoo [1.2.7.2::gentoo] USE="-alisp -debug -doc -python (-thread-safety%*)" ABI_X86="(64) -32 (-x32)" PYTHON_SINGLE_TARGET="python3_11* -python3_10 (-python3_9%*)" 1082 KiB
[ebuild     U  ] sys-apps/dbus-1.15.6::gentoo [1.15.2::gentoo] USE="elogind -X -debug -doc (-selinux) -static-libs -systemd -test -valgrind%" ABI_X86="(64) -32 (-x32)" 1374 KiB
[ebuild     U  ] virtual/udev-217-r7::gentoo [217-r5::gentoo] USE="-systemd%" 0 KiB
[ebuild     U  ] dev-libs/libxml2-2.11.5:2::gentoo [2.10.3-r1:2::gentoo] USE="ftp icu python readline -debug -examples -lzma -static-libs -test" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_11* -python3_10 (-python3_12) (-python3_9%*)" 2567 KiB
[ebuild     U  ] dev-libs/libxslt-1.1.39::gentoo [1.1.37-r1::gentoo] USE="crypt -debug -examples -python -static-libs" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_11* -python3_10 (-python3_12) (-python3_9%*)" 1542 KiB
[ebuild     U  ] dev-python/installer-0.7.0::gentoo [0.6.0::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 907 KiB
[ebuild     U  ] dev-python/gpep517-15::gentoo [13::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 18 KiB
[ebuild     U  ] dev-python/flit-core-3.9.0::gentoo [3.8.0::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 41 KiB
[ebuild  N     ] dev-python/editables-0.5::gentoo  USE="-test" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" 16 KiB
[ebuild     U  ] dev-python/idna-3.6::gentoo [3.4::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 172 KiB
[ebuild     U  ] dev-python/jaraco-context-4.3.0::gentoo [4.2.0::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 10 KiB
[ebuild     U  ] dev-python/more-itertools-10.1.0::gentoo [9.0.0::gentoo] USE="-doc -test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 109 KiB
[ebuild     U  ] dev-python/jaraco-functools-4.0.0::gentoo [3.5.2::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 18 KiB
[ebuild     U  ] dev-python/jaraco-text-3.12.0::gentoo [3.11.0::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 16 KiB
[ebuild   R    ] dev-python/ordered-set-4.1.0::gentoo  USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild  N     ] dev-python/pathspec-0.12.1::gentoo  USE="-test" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" 50 KiB
[ebuild  N     ] dev-python/platformdirs-4.1.0::gentoo  USE="-test" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" 20 KiB
[ebuild     U  ] dev-python/pyparsing-3.1.1::gentoo [3.0.9::gentoo] USE="-examples -test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 865 KiB
[ebuild     U  ] dev-python/packaging-23.2::gentoo [21.3-r2::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 144 KiB
[ebuild     U  ] dev-python/nspektr-0.5.0::gentoo [0.4.0::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 9 KiB
[ebuild   R    ] dev-python/tomli-2.0.1-r1::gentoo  USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild  N     ] dev-python/trove-classifiers-2023.11.29::gentoo  USE="-test" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" 16 KiB
[ebuild     U  ] dev-python/typing-extensions-4.9.0::gentoo [4.3.0::gentoo] USE="-test%" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 86 KiB
[ebuild     U  ] dev-python/wheel-0.42.0::gentoo [0.38.4::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 97 KiB
[ebuild     U  ] dev-util/cmake-3.27.9::gentoo [3.25.2::gentoo] USE="ncurses -dap% -doc -emacs -gui% -qt6% -test -verify-sig (-qt5%)" 11237 KiB
[ebuild     U  ] dev-util/glib-utils-2.78.3::gentoo [2.74.4::gentoo] PYTHON_SINGLE_TARGET="python3_11* -python3_10 (-python3_12) (-python3_9%*)" 5197 KiB
[ebuild     U  ] net-libs/gnutls-3.8.0:0/30.30::gentoo [3.7.8:0/30.30::gentoo] USE="cxx idn nls openssl seccomp tls-heartbeat tools zlib -brotli -dane -doc -examples -pkcs11 (-sslv2) (-sslv3) -static-libs -test (-test-full) -verify-sig -zstd (-guile%) (-valgrind%)" ABI_X86="(64) -32 (-x32)" 6229 KiB
[ebuild     U  ] sys-apps/util-linux-2.38.1-r3::gentoo [2.38.1::gentoo] USE="cramfs hardlink logger ncurses nls pam readline (split-usr) su suid tty-helpers udev (unicode) -audit -build -caps -cryptsetup -fdformat -kill -magic -python (-rtas) (-selinux) -slang -static-libs -systemd -test -verify-sig" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_11* -python3_10 (-python3_9%*)" 0 KiB
[ebuild     U  ] dev-lang/python-3.11.7:3.11::gentoo [3.11.1-r1:3.11::gentoo] USE="ensurepip gdbm libedit ncurses readline sqlite ssl tk -bluetooth -build -debug% -examples -pgo -test -valgrind -verify-sig (-hardened%) (-lto%)" 19612 KiB
[ebuild     U  ] x11-base/xcb-proto-1.16.0::gentoo [1.15.2::gentoo] PYTHON_TARGETS="python3_11* -python3_10 (-python3_12) (-python3_9%*)" 149 KiB
[ebuild     U  ] dev-python/setuptools-69.0.2-r1::gentoo [65.7.0::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 2168 KiB
[ebuild     U  ] dev-python/setuptools-scm-8.0.4::gentoo [7.1.0::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 73 KiB
[ebuild     U  ] sys-apps/file-5.45-r3::gentoo [5.44-r3::gentoo] USE="bzip2 python seccomp zlib -lzip -lzma -static-libs -verify-sig -zstd" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_11* -python3_10 (-python3_9%*)" 1218 KiB
[ebuild     U  ] dev-python/certifi-3021.3.16-r4::gentoo [3021.3.16-r3::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild     U  ] dev-python/charset-normalizer-3.3.2::gentoo [3.0.1::gentoo] USE="-test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 103 KiB
[ebuild   R    ] dev-python/PySocks-1.7.1-r2::gentoo  PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild     U  ] dev-util/meson-1.3.0-r2::gentoo [0.64.1::gentoo] USE="(-test) -verify-sig%" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 2171 KiB
[ebuild     U  ] dev-util/gdbus-codegen-2.78.3::gentoo [2.74.4::gentoo] PYTHON_SINGLE_TARGET="python3_11* -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild  N     ] dev-python/pluggy-1.3.0::gentoo  USE="-test" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" 63 KiB
[ebuild     U  ] dev-python/cython-3.0.6::gentoo [0.29.32::gentoo] USE="-debug% -doc -test (-emacs%)" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 2696 KiB
[ebuild     U  ] dev-python/markupsafe-2.1.3::gentoo [2.1.1::gentoo] USE="-debug% -test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 19 KiB
[ebuild   R    ] dev-python/jinja-3.1.2::gentoo  USE="-doc -examples -test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild  N     ] dev-python/hatchling-1.21.0::gentoo  USE="-test" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" 747 KiB
[ebuild  N     ] dev-python/lxml-4.9.4::gentoo  USE="threads -debug -doc -examples -test" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" 962 KiB
[ebuild     U  ] dev-python/urllib3-2.1.0::gentoo [1.26.13::gentoo] USE="-brotli -test -zstd%" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 258 KiB
[ebuild     U  ] dev-python/requests-2.31.0::gentoo [2.28.1-r1::gentoo] USE="(test-rust) -socks5 -test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 109 KiB
[ebuild     U  ] app-portage/gemato-20.5::gentoo [17.0::gentoo] USE="gpg -pretty-log -test -tools" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 87 KiB
[ebuild     U  ] dev-util/ninja-1.11.1-r3::gentoo [1.11.1-r2::gentoo] USE="-doc -emacs -test" 0 KiB
[ebuild  N     ] app-alternatives/ninja-1::gentoo  USE="reference -samurai" 0 KiB
[ebuild     U  ] media-libs/lcms-2.15:2::gentoo [2.13.1-r3:2::gentoo] USE="jpeg tiff -doc -static-libs (-test%) (-threads%*) (-zlib%*)" ABI_X86="(64) -32 (-x32)" 7372 KiB
[ebuild     U  ] app-arch/zstd-1.5.5:0/1::gentoo [1.5.2-r3:0/1::gentoo] USE="lzma%* (split-usr) zlib%* -lz4 -static-libs -test%" ABI_X86="(64) -32 (-x32)" 2314 KiB
[ebuild   R    ] app-misc/pax-utils-1.3.5::gentoo  USE="man -caps -python (-seccomp) -test" PYTHON_SINGLE_TARGET="python3_11* -python3_10 (-python3_9%*)" 0 KiB
[ebuild     U  ] net-libs/nghttp2-1.57.0:0/1.14::gentoo [1.51.0:0/1.14::gentoo] USE="xml -debug -hpack-tools -jemalloc -static-libs -systemd% -test -utils (-cxx%*)" ABI_X86="(64) -32 (-x32)" 1508 KiB
[ebuild     U  ] net-misc/curl-8.4.0::gentoo [7.87.0-r2::gentoo] USE="adns alt-svc* ftp gnutls hsts* http2 imap kerberos openssl pop3 progress-meter samba smtp ssl tftp -brotli -gopher -idn -ldap -mbedtls (-nghttp3) -rtmp (-rustls) -ssh (-sslv3) -static-libs -telnet -test -verify-sig -websockets -zstd (-ipv6%*) (-nss%) (-quiche%)" ABI_X86="(64) -32 (-x32)" CURL_SSL="openssl -gnutls -mbedtls (-rustls) (-nss%)" 2597 KiB
[ebuild     U  ] sys-apps/portage-3.0.59::gentoo [3.0.43-r1::gentoo] USE="(ipc) native-extensions rsync-verify xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 1148 KiB
[ebuild     U  ] sys-apps/kmod-31::gentoo [30::gentoo] USE="lzma (tools) zlib zstd -debug -doc -pkcs7 -python -static-libs" PYTHON_TARGETS="python3_11%* -python3_10 (-python3_9%*)" 558 KiB
[ebuild     U  ] dev-java/java-config-2.3.3-r1:2::gentoo [2.3.1:2::gentoo] USE="-test" PYTHON_TARGETS="python3_11* -python3_10 (-python3_12) (-python3_9%*)" 34 KiB
[ebuild     U  ] sys-devel/gettext-0.22.4::gentoo [0.21.1::gentoo] USE="acl cxx java ncurses nls openmp (xattr%*) -doc -emacs -git -static-libs -verify-sig (-cvs%)" ABI_X86="(64) -32 (-x32)" 10016 KiB
[ebuild     U  ] dev-libs/glib-2.78.3:2::gentoo [2.74.4:2::gentoo] USE="dbus elf (mime) xattr -debug -gtk-doc (-selinux) -static-libs -sysprof -systemtap -test -utils" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild     U  ] media-libs/fontconfig-2.14.2-r3:1.0::gentoo [2.14.0-r1:1.0::gentoo] USE="nls%* -doc -test (-static-libs%)" ABI_X86="(64) -32 (-x32)" 1408 KiB
[ebuild     U  ] sys-apps/systemd-utils-254.7::gentoo [251.10-r1::gentoo] USE="acl kmod (split-usr) tmpfiles udev -boot -kernel-install% -secureboot% (-selinux) -sysusers -test -ukify%" ABI_X86="(64) -32 (-x32)" PYTHON_SINGLE_TARGET="python3_11%* -python3_10% (-python3_12)" 14075 KiB
[ebuild  NS    ] sys-devel/gcc-13.2.1_p20230826:13::gentoo [12.2.1_p20230121-r1:12::gentoo] USE="(cxx) fortran (multilib) nls nptl objc openmp (pie) sanitize ssp -ada (-cet) (-custom-cflags) -d -debug -default-stack-clash-protection -default-znow -doc (-fixed-point) -go -graphite -hardened (-ieee-long-double) -jit (-libssp) -lto -modula2% -objc++ -objc-gc (-pch) -pgo -systemtap -test -valgrind -vanilla -vtv -zstd" 82352 KiB
[ebuild     U  ] sys-apps/diffutils-3.10::gentoo [3.8::gentoo] USE="nls -verify-sig (-static%)" 1587 KiB
[ebuild     U  ] app-crypt/pinentry-1.2.1-r4::gentoo [1.2.1-r1::gentoo] USE="ncurses -X% -caps -efl -emacs -gtk -keyring% -qt5 -verify-sig -wayland% (-gnome-keyring%)" 0 KiB
[ebuild     U  ] dev-libs/elfutils-0.190::gentoo [0.188::gentoo] USE="bzip2 nls utils -debuginfod% -lzma -static-libs -test -verify-sig -zstd (-valgrind%)" ABI_X86="(64) -32 (-x32)" 8949 KiB
[ebuild     U  ] www-client/lynx-2.9.0_pre12-r1::gentoo [2.9.0_pre10::gentoo] USE="bzip2 gnutls nls ssl -brotli% -cjk -idn -verify-sig" 2698 KiB
[ebuild     U  ] dev-libs/gobject-introspection-1.78.1::gentoo [1.74.0::gentoo] USE="-doctool -gtk-doc -test" PYTHON_SINGLE_TARGET="python3_11* -python3_10 (-python3_9%*)" 0 KiB
[blocks b      ] <dev-libs/gobject-introspection-1.78.1 ("<dev-libs/gobject-introspection-1.78.1" is soft blocking dev-libs/gobject-introspection-common-1.78.1)
[ebuild     U  ] x11-libs/cairo-1.18.0::gentoo [1.17.6::gentoo] USE="glib -X (-aqua) (-debug) -gtk-doc -test (-gles2-only%) (-gles3%) (-opengl%)" ABI_X86="(64) -32 (-x32)" 42949 KiB
[ebuild     U  ] sys-auth/polkit-123::gentoo [121::gentoo] USE="daemon%* duktape introspection pam -examples -gtk -kde (-selinux) -systemd -test" 691 KiB
[blocks B      ] <dev-python/setuptools-67 ("<dev-python/setuptools-67" is soft blocking dev-python/packaging-23.2)

Total: 90 packages (66 upgrades, 12 new, 1 in new slot, 11 reinstalls), Size of downloads: 269626 KiB
Conflict: 3 blocks (1 unsatisfied)

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

sys-apps/portage:0

  (sys-apps/portage-3.0.59:0/0::gentoo, ebuild scheduled for merge) USE="(ipc) native-extensions rsync-verify xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" pulled in by
    sys-apps/portage (Argument)
    sys-apps/portage[python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (dev-java/java-config-2.3.3-r1:2/2::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 -python3_10 (-python3_12)"
                                                                                                                                                                                                                                             

  (sys-apps/portage-3.0.43-r1:0/0::gentoo, installed) USE="(ipc) native-extensions rsync-verify userland_GNU xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11" pulled in by
    sys-apps/portage[python_targets_python3_9(-)] required by (app-portage/layman-2.4.3:0/0::gentoo, installed) USE="subversion userland_GNU -cvs -darcs -g-sorcery -git -gpg -mercurial -sqlite -squashfs -sync-plugin-portage -test" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
    sys-apps/portage[python_targets_python3_9(-)] required by (app-admin/webapp-config-1.55-r2:0/0::gentoo, installed) USE="portage userland_GNU" ABI_X86="(64)" PYTHON_TARGETS="python3_9 -python3_10"
                                                                                                                                                                                                                                             
...
                                                                                                                                                                                                                                             
    >=dev-python/typing-extensions-4.1.0[python_targets_python3_9(-)] required by (dev-python/pydantic-1.10.4:0/0::gentoo, installed) USE="native-extensions userland_GNU -test" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11"
                                                                                                                                                                                                                                             
 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.


!!! The following installed packages are masked:
- dev-libs/openssl-1.1.1s::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Sam James <sam@gentoo.org> (2023-09-09)
# OpenSSL 1.1.x is EOL on 2023-09-11. Please upgrade immediately to >= OpenSSL 3.
# https://www.openssl.org/blog/blog/2023/03/28/1.1.1-EOL/
# https://www.openssl.org/blog/blog/2023/06/15/1.1.1-EOL-Reminder/
# Please run a full world upgrade, especially checking /etc/portage and your world file
# for old PHP or Ruby references.

- sys-libs/binutils-libs-2.39-r4::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Andreas K. Hüttel <dilfridge@gentoo.org> (2017-05-21)
# (and others, updated later)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.

For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.

I commented out the PYTHON_TARGETS and PYTHON_SINGLE_TARGET settings in /etc/make.conf. Doesn't seem to make a difference whatever is in there.

One ornery culprit seems to be the dev-lang/python-exec package. It seems to be causing a slot conflict, even though it's the same version. Like the same version of python-exec is triggering a conflict? For the same version of the same package? I played around with various PYTHON_TARGET settings, but I get the exact same error no matter what.

Code: Select all

emerge -pv python-exec

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R    ] dev-lang/python-exec-2.4.10:2::gentoo  USE="(native-symlinks) -test" PYTHON_TARGETS="(pypy3) (python3_10) (python3_11) (python3_12%*) (-python3_9%*)" 0 KiB

Total: 1 package (1 reinstall), Size of downloads: 0 KiB

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-lang/python-exec:2

  (dev-lang/python-exec-2.4.10:2/2::gentoo, ebuild scheduled for merge) USE="(native-symlinks) -test" ABI_X86="(64)" PYTHON_TARGETS="(pypy3) (python3_10) (python3_11) (python3_12)" pulled in by
    dev-lang/python-exec (Argument)

  (dev-lang/python-exec-2.4.10:2/2::gentoo, installed) USE="(native-symlinks) userland_GNU -test" ABI_X86="(64)" PYTHON_TARGETS="(pypy3) (python3_10) (python3_11) python3_9" pulled in by
    dev-lang/python-exec[python_targets_python3_9(-)] required by (dev-lang/python-3.9.16-r1:3.9/3.9::gentoo, installed) USE="ensurepip gdbm ncurses readline sqlite ssl tk userland_GNU xml -bluetooth -build -examples -hardened -lto -pgo -test -valgrind -verify-sig" ABI_X86="(64)"

NOTE: I've trimmed down the error list since I was getting the "Error in posting" error.

[alamahant]

when I tried the typical emerge -Udn @world

Plz try with

Code: Select all

eix-sync
emerge -uDUav --with-bdeps=y --keep-going @world --backtrack=250

and post your output.

As it stands now you are missing the "u" component ie "update".

[direwolf]

IDK what "eix-sync" is. Did you mean emerge-sync? I did that.

Looks like all the same Python conflicts, and some perl, portage, and gemato conflicts, too. (I had to trim, it's too long to post without triggering the "Error in posting" issue)

Code: Select all

emerge -uDUav --with-bdeps=y --keep-going @world --backtrack=250

 * IMPORTANT: 8 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.


These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild     U  ] sys-kernel/linux-headers-6.1::gentoo [5.15-r3::gentoo] USE="-headers-only" 131572 KiB
[ebuild     U  ] sys-devel/gnuconfig-20230731::gentoo [20221007::gentoo] 72 KiB
[ebuild     U  ] dev-libs/libffi-3.4.4-r2:0/8::gentoo [3.4.4:0/8::gentoo] USE="-debug (-exec-static-trampoline) -pax-kernel -static-libs -test" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild     U  ] sec-keys/openpgp-keys-gentoo-release-20230329::gentoo [20220101::gentoo] USE="-test" 17 KiB
[ebuild     U  ] dev-python/ensurepip-pip-23.3.2::gentoo [22.3.1::gentoo] 2060 KiB
[ebuild     U  ] acct-group/audio-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/lp-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] sys-apps/install-xattr-0.8-r1::gentoo [0.8::gentoo] 0 KiB
[ebuild     U  ] acct-group/sshd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/man-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] sys-apps/baselayout-2.14-r1::gentoo [2.9::gentoo] USE="(split-usr) -build" 30 KiB
[ebuild     U  ] dev-util/pkgconf-1.8.1:0/3::gentoo [1.8.0-r1:0/3::gentoo] USE="-test" ABI_X86="(64) -32 (-x32)" 296 KiB
[ebuild     U  ] dev-python/ensurepip-setuptools-69.0.2::gentoo [65.6.3::gentoo] 801 KiB
[ebuild     U  ] sys-libs/timezone-data-2023c-r1::gentoo [2022g::gentoo] USE="nls -leaps-timezone -zic-slim" 720 KiB
[ebuild     U  ] acct-group/cdrom-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/dialout-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/disk-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild  N     ] acct-group/floppy-0-r1::gentoo  0 KiB
[ebuild     U  ] acct-group/input-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/kmem-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/kvm-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/render-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/sgx-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-group/tape-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/tty-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild  N     ] acct-group/usb-0-r2::gentoo  0 KiB
[ebuild     U  ] acct-group/video-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/polkitd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/polkitd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/messagebus-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/messagebus-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/portage-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-user/portage-0-r2::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] net-dns/c-ares-1.21.0:0/2::gentoo [1.18.1:0/2::gentoo] USE="-static-libs -test -verify-sig%" ABI_X86="(64) -32 (-x32)" 1586 KiB
[ebuild     U  ] acct-user/sshd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] media-libs/alsa-ucm-conf-1.2.10-r1::gentoo [1.2.7.2::gentoo] 44 KiB
[ebuild   R    ] dev-lang/python-exec-conf-2.4.6:2::gentoo  PYTHON_TARGETS="python3_11* (-pypy3) -python3_10 (-python3_12) (-python3_9%*)" 0 KiB
[ebuild   R    ] dev-lang/python-exec-2.4.10:2::gentoo  USE="(native-symlinks) -test" PYTHON_TARGETS="(pypy3) (python3_10) (python3_11) (python3_12%*) (-python3_9%*)" 0 KiB
[ebuild     U  ] acct-user/man-1-r2::gentoo [1-r1::gentoo] 0 KiB
[ebuild     U  ] sys-devel/autoconf-archive-2023.02.20::gentoo [2022.09.03::gentoo] 663 KiB
[ebuild     U  ] acct-group/mail-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild   R    ] sys-libs/libseccomp-2.5.4::gentoo  USE="(-experimental-loong) -python -static-libs -test" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python3_11%* -python3_10 (-python3_9%*)" 0 KiB
[ebuild     U  ] acct-group/apache-0-r3::gentoo [0-r2::gentoo] 0 KiB
[ebuild     U  ] acct-group/mysql-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/apache-0-r3::gentoo [0-r2::gentoo] 0 KiB
[ebuild     U  ] acct-group/partimag-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/root-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-group/squid-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] app-text/libpaper-2.1.2:0/2::gentoo [2.0.4:0/2::gentoo] 1235 KiB
[ebuild     U  ] acct-group/transmission-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] dev-db/lmdb-0.9.30:0/0.9.30::gentoo [0.9.29:0/0.9.29::gentoo] USE="-static-libs" ABI_X86="(64) -32 (-x32)" 142 KiB
[ebuild     U  ] acct-group/ldap-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-group/stunnel-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/ntp-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/openntpd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/minidlna-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-group/dhcp-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] net-libs/courier-unicode-2.2.6:0/7::gentoo [2.2.3-r1:0/7::gentoo] 585 KiB
[ebuild     U  ] sys-libs/liburing-2.3-r4:0/2::gentoo [2.2:0/2::gentoo] USE="-examples% -static-libs -test%" ABI_X86="(64) -32 (-x32)" 194 KiB
[ebuild     U  ] acct-group/ddclient-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/avahi-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/pcap-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] media-fonts/urw-fonts-20230503-r1::gentoo [2.4.9::gentoo] USE="-X" 10933 KiB
[ebuild     U  ] acct-group/postfix-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/sockd-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-user/mysql-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/cron-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] dev-util/re2c-2.2::gentoo [2.1.1-r1::gentoo] USE="-debug -test%" 1427 KiB
[ebuild     U  ] app-crypt/libmd-1.1.0::gentoo [1.0.4::gentoo] ABI_X86="(64) -32 (-x32)" 265 KiB
[ebuild  N     ] app-arch/ncompress-5.0-r1::gentoo  34 KiB
[ebuild     U  ] sys-devel/automake-wrapper-20221207::gentoo [11-r1::gentoo] 0 KiB
[ebuild     U  ] sys-devel/autoconf-wrapper-20221207-r1::gentoo [20221207::gentoo] 0 KiB
[ebuild     U  ] acct-user/partimag-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] sys-apps/hwdata-0.376::gentoo [0.366::gentoo] 2320 KiB
[ebuild     U  ] acct-user/squid-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/lpadmin-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] net-libs/libnatpmp-20230423-r1::gentoo [20150609::gentoo] 26 KiB
[ebuild     U  ] acct-user/transmission-1-r2::gentoo [1-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/ldap-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-user/stunnel-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/ntp-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/openntpd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/minidlna-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-user/dhcp-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/mail-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/postmaster-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/fetchmail-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/ftp-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/dnrd-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-user/ddclient-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/avahi-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/netdev-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/pcap-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] dev-libs/liblinear-246:0/5::gentoo [243:0/4::gentoo] 556 KiB
[ebuild     U  ] media-sound/shorten-3.6.1-r1::gentoo [3.6.1::gentoo] 0 KiB
[ebuild     U  ] acct-user/mpd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/postdrop-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-user/postfix-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] dev-util/b2-4.10.1::gentoo [4.9.3::gentoo] USE="-examples" 960 KiB
[ebuild     U  ] acct-user/sockd-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] app-text/poppler-data-0.4.12::gentoo [0.4.11-r2::gentoo] 4400 KiB
[ebuild     U  ] acct-group/utmp-0-r2::gentoo [0-r1::gentoo] 0 KiB
[ebuild     U  ] acct-group/crontab-0-r1::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] acct-user/cron-0-r2::gentoo [0::gentoo] 0 KiB
[ebuild     U  ] sys-process/cronbase-0.3.7-r10::gentoo [0.3.7-r8::gentoo] 0 KiB
[ebuild     U  ] mail-client/mailx-support-20060102-r3::gentoo [20060102-r2::gentoo] 0 KiB
[ebuild     U  ] sys-apps/gentoo-functions-0.19::gentoo [0.17::gentoo] 12 KiB
[ebuild     U  ] sys-devel/gcc-config-2.11::gentoo [2.8::gentoo] USE="(cc-wrappers) (native-symlinks)" 18 KiB
[ebuild     U  ] sys-devel/binutils-config-5.5::gentoo [5.4.1::gentoo] USE="(native-symlinks)" 8 KiB
[ebuild     U  ] app-arch/xz-utils-5.4.5::gentoo [5.4.1::gentoo] USE="extra-filters nls (split-usr) -doc% -pgo% -static-libs -verify-sig" ABI_X86="(64) -32 (-x32)" 2817 KiB
[ebuild     U  ] dev-libs/libunistring-1.1-r1:0/5::gentoo [0.9.10-r1:0/2::gentoo] USE="-doc -static-libs" ABI_X86="(64) -32 (-x32)" 2342 KiB
[ebuild     U  ] dev-libs/libltdl-2.4.7-r1::gentoo [2.4.7::gentoo] USE="-static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild     U  ] dev-libs/vala-common-0.56.14::gentoo [0.56.3::gentoo] 3910 KiB
[ebuild     U  ] net-libs/miniupnpc-2.2.5:0/17::gentoo [2.2.4:0/17::gentoo] USE="ipv6 -verify-sig" 102 KiB
[ebuild     U  ] dev-libs/libevent-2.1.12-r1:0/2.1-7::gentoo [2.1.12:0/2.1-7::gentoo] USE="clock-gettime ssl -debug -malloc-replacement -static-libs -test -verbose-debug -verify-sig% (-threads%*)" ABI_X86="(64) -32 (-x32)" 1076 KiB
===============
SNIP
==========

[blocks B      ] <dev-python/setuptools-67 ("<dev-python/setuptools-67" is soft blocking dev-python/packaging-23.2)

Total: 611 packages (519 upgrades, 65 new, 8 in new slots, 19 reinstalls), Size of downloads: 2563781 KiB
Conflict: 5 blocks (1 unsatisfied)

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-lang/perl:0

  (dev-lang/perl-5.38.2-r1:0/5.38::gentoo, ebuild scheduled for merge) USE="berkdb gdbm -debug -doc -ithreads -minimal -quadmath" ABI_X86="(64)" pulled in by
    =dev-lang/perl-5.38* required by (virtual/perl-Locale-Maketext-1.330.0:0/0::gentoo, ebuild scheduled for merge) USE="" ABI_X86="(64)"
    ^              ^^^^^                                                                                                                               
    (and 48 more with the same problem)

  (dev-lang/perl-5.36.1-r3:0/5.36::gentoo, ebuild scheduled for merge) USE="berkdb gdbm -debug -doc -ithreads -minimal -quadmath" ABI_X86="(64)" pulled in by
    dev-lang/perl:0/5.36= required by (dev-perl/Encode-Detect-1.10.0-r2:0/0::gentoo, installed) USE="userland_GNU" ABI_X86="(64)"
                 ^^^^^^^^                                                                                                                              
    (and 81 more with the same problem)

sys-apps/portage:0

  (sys-apps/portage-3.0.59:0/0::gentoo, ebuild scheduled for merge) USE="(ipc) native-extensions rsync-verify xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" pulled in by
    sys-apps/portage[python_targets_python3_11(-)] required by (app-portage/unsymlink-lib-20:0/0::gentoo, ebuild scheduled for merge) USE="" ABI_X86="(64)" PYTHON_SINGLE_TARGET="python3_11 -python3_10"
                                                                                                                                                       
    >=sys-apps/portage-3.0.53[python_targets_pypy3(-)?,python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (app-portage/gentoolkit-0.6.3-r1:0/0::gentoo, ebuild scheduled for merge) USE="" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)"
    ^^                 ^^^^^^                                                                                                                                                                                                                                                                                                                                                                                                                                        
    sys-apps/portage[python_targets_python3_10(-)?,python_targets_python3_11(-)?] required by (app-admin/webapp-config-1.55-r3:0/0::gentoo, ebuild scheduled for merge) USE="portage" ABI_X86="(64)" PYTHON_TARGETS="python3_11 -python3_10"
                                                                                                                                                                                                                                                                                                              
    sys-apps/portage[python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (dev-java/java-config-2.3.3-r1:2/2::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 -python3_10 (-python3_12)"
                                                                                                                                                                                                                                                                                                              

  (sys-apps/portage-3.0.43-r1:0/0::gentoo, installed) USE="(ipc) native-extensions rsync-verify userland_GNU xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11" pulled in by
    sys-apps/portage[python_targets_python3_9(-)] required by (app-portage/layman-2.4.3:0/0::gentoo, installed) USE="subversion userland_GNU -cvs -darcs -g-sorcery -git -gpg -mercurial -sqlite -squashfs -sync-plugin-portage -test" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

app-portage/gemato:0

  (app-portage/gemato-20.5:0/0::gentoo, ebuild scheduled for merge) USE="gpg -pretty-log -test -tools" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" pulled in by
    >=app-portage/gemato-14.5[python_targets_pypy3(-)?,python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (sys-apps/portage-3.0.59:0/0::gentoo, ebuild scheduled for merge) USE="(ipc) native-extensions rsync-verify xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)"

  (app-portage/gemato-17.0:0/0::gentoo, installed) USE="gpg userland_GNU -pretty-log -test -tools" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11" pulled in by
    >=app-portage/gemato-14.5[python_targets_python3_9(-)] required by (sys-apps/portage-3.0.43-r1:0/0::gentoo, installed) USE="(ipc) native-extensions rsync-verify userland_GNU xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11"

dev-python/setuptools:0

  (dev-python/setuptools-69.0.2-r1:0/0::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" pulled in by
    dev-python/setuptools[python_targets_pypy3(-)?,python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (dev-python/setuptools-scm-8.0.4:0/0::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)"

[fedeliallalinea]

The problem seems to be app-portage/layman which is not supported and has been removed from the tree.
Use eselect-repository instead of layman.

[direwolf]

I think I was only using layman at one time for Squirrelmail. It eventually broke entirely so I switched to RoundCube, and don't need layman any more. So...

Code: Select all

emerge --depclean layman

Then I tried @world again. Looks like it's going to try to merge the 703 updates now. THANK YOU!

just weird that I get this:

Code: Select all

Would you like to merge these packages? [Yes/No] Yes
Sorry, response 'Yes' not understood. [Yes/No] y

[direwolf]

Ok, well, I got a ways and then the system crashed and doesn't seem to be able to recover the interrupted emerge.

The culprit at this point seems to be caffeine. It doesn't like it when emerge isn't linked properly to the python version, or something like that.

emerge is currently kinda hosed. If I try to run it, I get

Code: Select all

emerge: no python-exec wrapped executable found in /usr/lib/python-exec.

ok, well, emerge doesn't live in /usr/lib/python-exec/python3.11, it's in /usr/lib/python-exec/python3.9. SO I can point there and continue my emerge, but caffeine dies - I can't get past that:

Code: Select all

>>> Emerging (4 of 545) dev-java/caffeine-2.6.2::gentoo
 * caffeine-2.6.2-sources.jar BLAKE2B SHA512 size ;-) ...                                                                                               [ ok ]
java-config-2: no python-exec wrapped executable found in /usr/lib/python-exec.
 *
 * Can't run java-config --help
 * Have you upgraded Python recently but not completed a world upgrade yet?
 * ERROR: dev-java/caffeine-2.6.2::gentoo failed (setup phase):
 *   Can't run java-config --help
 *
 * Call stack:
 *             ebuild.sh, line 136:  Called pkg_setup
 *             ebuild.sh, line 370:  Called java-pkg-2_pkg_setup
 *     java-pkg-2.eclass, line  53:  Called java-pkg_init
 *   java-utils-2.eclass, line 2226:  Called die
 * The specific snippet of code:
 *              die "Can't run java-config --help"
 *
 * If you need support, post the output of `emerge --info '=dev-java/caffeine-2.6.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-java/caffeine-2.6.2::gentoo'`.
!!! When you file a bug report, please include the following information:
GENTOO_VM=  CLASSPATH="" JAVA_HOME=""
JAVACFLAGS="" COMPILER=""
and of course, the output of emerge --info =caffeine-2.6.2
 * The complete build log is located at '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/die.env'.
 * Working directory: '/var/tmp/portage/dev-java/caffeine-2.6.2/empty'
 * S: '/var/tmp/portage/dev-java/caffeine-2.6.2/work'

>>> Failed to emerge dev-java/caffeine-2.6.2, Log file:

Seems it has the same issue, but I don't know how to fix it:

Code: Select all

java-config --help
java-config-2: no python-exec wrapped executable found in /usr/lib/python-exec.

I'm also unable to use eselect, for basically ANYTHING.

Code: Select all

eselect python
!!! Error: Can't load module python

Code: Select all

eselect java
!!! Error: Can't load module java

Not even news

Code: Select all

eselect news list
!!! Error: Package manager cannot get list of repositories
Call stack:
    * find_items (news.eselect:19)
    * do_list (news.eselect:190)
    * check_do (core.bash:24)
    * do_action (core.bash:114)
    * main (eselect:215)
News items:
  (none found)

How do I get out of this, anybody have any ideas? Pretty much any atom I try to emerge fails with a long list of python conflicts (including python), and @world fails with that caffeine error.

[wjb]

Are you out of disk space?

[direwolf]

Nah. not an issue

[grknight]

dev-java/java-config needs sys-apps/portage updated.
sys-apps/portage needs a bunch of other packages as well.

I would recommend the following command:

Code: Select all

/usr/lib/python-exec/python3.9emerge --oneshot dev-java/java-config sys-apps/portage

This may say a conflict where another package needs portage. If it does, include that package on the oneshot line.

FWIW, 'eselect python' is no longer necessary or recommended to use at all to the point that it should be removed from a system.

[direwolf]

Thanks, I've pretty much tried this kind of thing. There are a ton of errors and it always gets to setuptools-67 getting blocked. I'm scared to try to forcibly unmerge it for fear I'll break python (and portage) entirely.

Code: Select all

[blocks B      ] <dev-python/setuptools-67 ("<dev-python/setuptools-67" is soft blocking dev-python/packaging-23.2)

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

sys-apps/portage:0

  (sys-apps/portage-3.0.59:0/0::gentoo, ebuild scheduled for merge) USE="(ipc) native-extensions rsync-verify xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" pulled in by
    sys-apps/portage[python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (dev-java/java-config-2.3.3-r1:2/2::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 -python3_10 (-python3_12)"
                                                                                                                                                                                                                                                                                                                              
    sys-apps/portage (Argument)

  (sys-apps/portage-3.0.43-r1:0/0::gentoo, installed) USE="(ipc) native-extensions rsync-verify userland_GNU xattr -apidoc -build -doc -gentoo-dev (-selinux) -test" ABI_X86="(64)" PYTHON_TARGETS="python3_9 (-pypy3) -python3_10 -python3_11" pulled in by
    sys-apps/portage[python_targets_python3_9(-)] required by (app-admin/webapp-config-1.55-r2:0/0::gentoo, installed) USE="portage userland_GNU" ABI_X86="(64)" PYTHON_TARGETS="python3_9 -python3_10"
                                                                                                                                                               

And further down

Code: Select all

dev-python/setuptools:0

  (dev-python/setuptools-69.0.2-r1:0/0::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)" pulled in by
    >=dev-python/setuptools-67.8.0-r1[python_targets_pypy3(-)?,python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (dev-python/certifi-3021.3.16-r4:0/0::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)"
    ^^                      ^^^^^^^^^                                                                                                                                                                                                                                                                                                                                                                                                                                                        
    dev-python/setuptools[python_targets_pypy3(-)?,python_targets_python3_10(-)?,python_targets_python3_11(-)?,python_targets_python3_12(-)?] required by (dev-python/setuptools-scm-8.0.4:0/0::gentoo, ebuild scheduled for merge) USE="-test" ABI_X86="(64)" PYTHON_TARGETS="python3_11 (-pypy3) -python3_10 (-python3_12)"
                                                                                                                                                                                                                                                                                                                              
    (and 15 more with the same problems)

Trying to emerge all of that stuff at once -

Code: Select all

/usr/lib/python-exec/python3.9/emerge --oneshot dev-java/java-config sys-apps/portage dev-python/tomli dev-python/installer dev-python/gpep517 dev-python/flit-core dev-python/typing-extensions dev-python/pyparsing dev-python/idna dev-python/more-itertools dev-python/jaraco-context dev-python/ordered-set dev-python/platformdirs dev-python/editables dev-python/pathspec dev-python/trove-classifiers dev-python/packaging dev-python/jaraco-functools dev-python/jaraco-text dev-python/nspektr dev-python/wheel dev-util/ninja app-alternatives/ninja dev-python/setuptools dev-python/setuptools dev-python/certifi dev-python/charset-normalizer dev-python/PySocks dev-util/meson dev-python/pluggy dev-python/hatchling dev-python/urllib3 dev-python/requests app-portage/gemato

Just dies with the exact same error. Basically the only thing I've managed to give emerge to get it to even TRY installing stuff is using @world -

Code: Select all

/usr/lib/python-exec/python3.9/emerge -DNuUva --with-bdeps=y @world

That at least tries to start compiling stuff, but it always errors out at caffeine with the "Can't run java-help" error, because it relies on the python-exec wrapper to be in place. Anything else dies on setuptools.

[grknight]

Try adding --keep-going option to emerge if the @world is the only option. This should bypass what it can that fails.

[direwolf]

It refuses to keep going!

Code: Select all

>>> Emerging (11 of 538) dev-java/caffeine-2.6.2::gentoo
 * caffeine-2.6.2-sources.jar BLAKE2B SHA512 size ;-) ...                                                                                               [ ok ]
java-config-2: no python-exec wrapped executable found in /usr/lib/python-exec.
 *
 * Can't run java-config --help
 * Have you upgraded Python recently but not completed a world upgrade yet?
 * ERROR: dev-java/caffeine-2.6.2::gentoo failed (setup phase):
 *   Can't run java-config --help
 *
 * Call stack:
 *             ebuild.sh, line 136:  Called pkg_setup
 *             ebuild.sh, line 370:  Called java-pkg-2_pkg_setup
 *     java-pkg-2.eclass, line  53:  Called java-pkg_init
 *   java-utils-2.eclass, line 2226:  Called die
 * The specific snippet of code:
 *              die "Can't run java-config --help"
 *
 * If you need support, post the output of `emerge --info '=dev-java/caffeine-2.6.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-java/caffeine-2.6.2::gentoo'`.
!!! When you file a bug report, please include the following information:
GENTOO_VM=  CLASSPATH="" JAVA_HOME=""
JAVACFLAGS="" COMPILER=""
and of course, the output of emerge --info =caffeine-2.6.2
 * The complete build log is located at '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/die.env'.
 * Working directory: '/var/tmp/portage/dev-java/caffeine-2.6.2/empty'
 * S: '/var/tmp/portage/dev-java/caffeine-2.6.2/work'

>>> Failed to emerge dev-java/caffeine-2.6.2, Log file:

>>>  '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/build.log'
*** Resuming merge...

These are the packages that would be merged, in order:

Calculating dependencies... done!

 * Messages for package sys-libs/glibc-2.38-r9:

 * After upgrading glibc, please restart all running processes.
 * Be sure to include init (telinit u) or systemd (systemctl daemon-reexec).
 * Alternatively, reboot your system.
 * (See bug #660556, bug #741116, bug #823756, etc)

 * Messages for package net-libs/libpsl-0.21.2:

 * "icu" and "idn" USE flags are enabled. Using "idn".

 * Messages for package dev-java/caffeine-2.6.2:

 *
 * Can't run java-config --help
 * Have you upgraded Python recently but not completed a world upgrade yet?
 * ERROR: dev-java/caffeine-2.6.2::gentoo failed (setup phase):
 *   Can't run java-config --help
 *
 * Call stack:
 *             ebuild.sh, line 136:  Called pkg_setup
 *             ebuild.sh, line 370:  Called java-pkg-2_pkg_setup
 *     java-pkg-2.eclass, line  53:  Called java-pkg_init
 *   java-utils-2.eclass, line 2226:  Called die
 * The specific snippet of code:
 *              die "Can't run java-config --help"
 *
 * If you need support, post the output of `emerge --info '=dev-java/caffeine-2.6.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-java/caffeine-2.6.2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/die.env'.
 * Working directory: '/var/tmp/portage/dev-java/caffeine-2.6.2/empty'
 * S: '/var/tmp/portage/dev-java/caffeine-2.6.2/work'
 * One or more packages are either masked or have missing dependencies:
 *
 *   dev-lang/perl:0/5.36= pulled in by:
 *     (virtual/perl-File-Temp-0.231.100:0/0::gentoo, installed)
 *
 *   dev-lang/perl:0/5.36= pulled in by:
 *     (app-text/po4a-0.66:0/0::gentoo, installed)
 *
 *   dev-lang/perl:0/5.36= pulled in by:
 *     (app-text/App-XML-DocBook-Builder-0.100.300-r1:0/0::gentoo, installed)
 *
 * The resume list contains packages that are either masked or have
 * unsatisfied dependencies. Please restart/continue the operation
 * manually, or use --skipfirst to skip the first package in the list and
 * any other packages that may be masked or have missing dependencies.
 *
 * The following package has failed to build, install, or execute postinst:
 *
 *  (dev-java/caffeine-2.6.2:0/0::gentoo, ebuild scheduled for merge), Log file:
 *   '/var/tmp/portage/dev-java/caffeine-2.6.2/temp/build.log'
 *

 * Regenerating GNU info directory index...
 * Processed 96 info files.

 * IMPORTANT: config file '/etc/mtab' needs updating.
 * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
 * sections of the emerge man page to learn how to update config files.

 * IMPORTANT: 8 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.

 * After world updates, it is important to remove obsolete packages with
 * emerge --depclean. Refer to `man emerge` for more information.

Trying to resume with --skip-first doesn't work either, it tells me I have an invalid resume list.

[grknight]

In that case, I would suggest --exclude dev-java/caffeine as well