Forums

Skip to content

Advanced search
  • Quick links
    • Unanswered topics
    • Active topics
    • Search
  • FAQ
  • Login
  • Register
  • Board index Assistance Kernel & Hardware
  • Search

AMD 6600xt does not initialize; issue with firmware loading?

Kernel not recognizing your hardware? Problems with power management or PCMCIA? What hardware is compatible with Gentoo? See here. (Only for kernels supported by Gentoo.)
Post Reply
Advanced search
4 posts • Page 1 of 1
Author
Message
R0b0t1
Apprentice
Apprentice
Posts: 264
Joined: Thu Jun 05, 2008 9:26 pm

AMD 6600xt does not initialize; issue with firmware loading?

  • Quote

Post by R0b0t1 » Wed Dec 08, 2021 1:16 am

ppc64le system. Not built in, loading as module. I can't find it in /sys/class/drm. radeontop gives erroneous output and claims to be able to talk to the card.

Code: Select all

[    0.663618] EEH: Capable adapter found: recovery enabled.
[    0.663687] PCI: Probing PCI hardware done
[    0.668935] cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff
[    0.668944] cpuidle-powernv: Deepest stop: psscr = 0x0000000000300375,mask=0x00000000003003ff
[    0.668951] cpuidle-powernv: First stop level that may lose SPRs = 0x4
[    0.668957] cpuidle-powernv: First stop level that may lose timebase = 0x10
[    0.671849] Kprobes globally optimized
[    0.672009] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.672017] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.674343] fbcon: Taking over console
[    0.674400] iommu: Default domain type: Translated 
[    0.674406] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.674476] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.674494] pci 0005:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.674502] pci 0000:03:00.0: vgaarb: bridge control possible
[    0.674508] pci 0005:02:00.0: vgaarb: bridge control possible
[    0.674517] pci 0005:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
[    0.674524] vgaarb: loaded
[    0.674691] SCSI subsystem initialized
[    0.674707] libata version 3.00 loaded.
[    0.674761] usbcore: registered new interface driver usbfs
[    0.674777] usbcore: registered new interface driver hub
[    0.674799] usbcore: registered new device driver usb
[    0.674825] EDAC MC: Ver: 3.0.0
[    0.675261] clocksource: Switched to clocksource timebase
[    0.675359] VFS: Disk quotas dquot_6.6.0
[    0.675383] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.677664] NET: Registered PF_INET protocol family
[    0.677784] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.681040] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.681358] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.682559] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.682787] TCP: Hash tables configured (established 524288 bind 65536)
[    0.682986] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    0.683273] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.683571] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.683988] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.684002] NET: Registered PF_XDP protocol family
[    0.684057] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[    0.684090] pci 0003:01:00.0: enabling device (0140 -> 0142)
[    0.684110] pci 0000:03:00.1: saving config space at offset 0x0 (reading 0xab281002)
[    0.684115] pci 0000:03:00.1: saving config space at offset 0x4 (reading 0x100540)
[    0.684120] pci 0000:03:00.1: saving config space at offset 0x8 (reading 0x4030000)
[    0.684124] pci 0000:03:00.1: saving config space at offset 0xc (reading 0x800000)
[    0.684129] pci 0000:03:00.1: saving config space at offset 0x10 (reading 0x80120000)
[    0.684133] pci 0000:03:00.1: saving config space at offset 0x14 (reading 0x0)
[    0.684137] pci 0000:03:00.1: saving config space at offset 0x18 (reading 0x0)
[    0.684142] pci 0000:03:00.1: saving config space at offset 0x1c (reading 0x0)
[    0.684146] pci 0000:03:00.1: saving config space at offset 0x20 (reading 0x0)
[    0.684150] pci 0000:03:00.1: saving config space at offset 0x24 (reading 0x0)
[    0.684154] pci 0000:03:00.1: saving config space at offset 0x28 (reading 0x0)
[    0.684158] pci 0000:03:00.1: saving config space at offset 0x2c (reading 0xab281002)
[    0.684163] pci 0000:03:00.1: saving config space at offset 0x30 (reading 0x0)
[    0.684167] pci 0000:03:00.1: saving config space at offset 0x34 (reading 0x48)
[    0.684171] pci 0000:03:00.1: saving config space at offset 0x38 (reading 0x0)
[    0.684175] pci 0000:03:00.1: saving config space at offset 0x3c (reading 0x2ff)
[    0.684262] PCI: CLS 0 bytes, default 128
[    0.684390] Trying to unpack rootfs image as initramfs...
[    0.711906] Initialise system trusted keyrings
[    0.711928] Key type blacklist registered
[    0.711992] workingset: timestamp_bits=46 max_order=24 bucket_order=0
[    0.714177] zbud: loaded
[    0.740949] NET: Registered PF_ALG protocol family
[    0.740958] Key type asymmetric registered
[    0.740963] Asymmetric key parser 'x509' registered
[    0.740988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.741098] io scheduler bfq registered
[    0.741507] PowerPC PowerNV PCI Hotplug Driver version: 0.1
[    0.741680] pci_bus 0000:01: dev 00, created physical slot CPU1 Slot2 (16x)
[    0.741712] pci_bus 0001:01: dev ffffffff, created physical slot CPU1 Slot1 (8x)
[    0.741734] pci_bus 0002:01: dev 00, created physical slot Builtin SATA
[    0.741757] pci_bus 0003:01: dev 00, created physical slot Builtin USB
[    0.741781] pci_bus 0004:01: dev 00, created physical slot Builtin Ethernet
[    0.741804] pci_bus 0005:01: dev 00, created physical slot BMC
[    0.741985] pci 0005:02:00.0: enabling device (0141 -> 0143)
[    0.742004] Using unsupported 1024x768 (null) at 600c280010000, depth=32, pitch=4096
[    0.742139] Console: switching to colour frame buffer device 64x24
[    0.937738] fb0: Open Firmware frame buffer device on /pciex@600c3c0500000/pci@0/pci@0/vga@0
[    1.052522] IPMI message handler: version 39.2
[    1.110323] ipmi device interface
[    1.167863] ipmi_si: IPMI System Interface driver
[    1.225933] ipmi_si: Unable to find any System Interface(s)
[    1.340927] ipmi_ssif: IPMI SSIF Interface driver
[    1.412914] ipmi-powernv ibm,opal:ipmi: IPMI message handler: The GUID response from the BMC was too short, it was 1 but should have been 17.  Assuming GUID is not available.
[    1.609115] ipmi-powernv ibm,opal:ipmi: IPMI message handler: Found new BMC (man_id: 0x00cb06, prod_id: 0x0001, dev_id: 0x00)
[    2.157887] IPMI Watchdog: driver initialized
[    2.222970] IPMI poweroff: Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot
[    2.371133] IPMI poweroff: ATCA Detect mfg 0xCB06 prod 0x1
[    2.502014] IPMI poweroff: Found a chassis style poweroff function
[    2.635751] hvc0: raw protocol on /ibm,opal/consoles/serial@0
[    2.770842] hvc0: No interrupts property, using OPAL event
[    2.905948] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.916613] Freeing initrd memory: 12336K
[    3.042022] Non-volatile memory driver v1.3
[    3.181039] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    3.319966] ahci 0002:01:00.0: runtime IRQ mapping not provided by arch
[    3.319971] ahci 0002:01:00.0: version 3.0
[    3.319988] ahci 0002:01:00.0: enabling device (0541 -> 0543)
[    3.468053] ahci 0002:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    3.606192] ahci 0002:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    3.743899] ahci 0002:01:00.0: enabling bus mastering
[    3.744389] scsi host0: ahci
[    3.812332] scsi host1: ahci
[    3.878587] scsi host2: ahci
[    3.941961] scsi host3: ahci
[    4.002392] ata1: SATA max UDMA/133 abar m2048@0x600c100010000 port 0x600c100010100 irq 41
[    4.123771] ata2: SATA max UDMA/133 abar m2048@0x600c100010000 port 0x600c100010180 irq 41
[    4.246724] ata3: SATA max UDMA/133 abar m2048@0x600c100010000 port 0x600c100010200 irq 41
[    4.371123] ata4: SATA max UDMA/133 abar m2048@0x600c100010000 port 0x600c100010280 irq 41
[    4.498285] 5 fixed-partitions partitions found on MTD device flash@0
[    4.625062] Creating 5 MTD partitions on "flash@0":
[    4.690778] 0x000000000000-0x000004000000 : "PNOR"
[    4.757058] 0x0000022a1000-0x000003821000 : "BOOTKERNEL"
[    4.806379] ata2: SATA link down (SStatus 0 SControl 300)
[    4.881708] 0x000003944000-0x000003946000 : "VERSION"
[    5.004865] ata1: SATA link down (SStatus 0 SControl 300)
[    5.068973] 0x000003989000-0x0000039c9000 : "IMA_CATALOG"
[    5.190999] ata3: SATA link down (SStatus 0 SControl 300)
[    5.318782] 0x000003e10000-0x000003ff0000 : "BOOTKERNFW"
[    5.597032] libphy: Fixed MDIO Bus: probed
[    5.609267] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.667544] mousedev: PS/2 mouse device common for all mice
[    5.806917] ata4.00: supports DRM functions and may not be fully accessible
[    5.999306] rtc-opal opal-rtc: registered as rtc0
[    6.074823] ata4.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT03B6Q, max UDMA/133
[    6.166276] rtc-opal opal-rtc: setting system clock to 2021-12-07T22:57:22 UTC (1638917842)
[    6.280199] ata4.00: disabling queued TRIM support
[    6.418326] ata4.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    6.418342] i2c_dev: i2c /dev entries driver
[    6.560785] ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    6.629898] at24 0-0050: 65536 byte 24c512 EEPROM, writable, 1 bytes/write
[    6.768852] ata4.00: supports DRM functions and may not be fully accessible
[    6.955137] at24 2-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
[    7.049362] ata4.00: disabling queued TRIM support
[    7.191566] ata4.00: configured for UDMA/133
[    7.262527] at24 4-0054: 256 byte spd EEPROM, read-only
[    7.263094] random: fast init done
[    7.263245] scsi 3:0:0:0: Direct-Access     ATA      Samsung SSD 860  3B6Q PQ: 0 ANSI: 5
[    7.263492] ata4.00: Enabling discard_zeroes_data
[    7.263574] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    7.263590] sd 3:0:0:0: [sda] Write Protect is off
[    7.263593] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.263618] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.405874] device-mapper: uevent: version 1.0.3
[    7.473436] ata4.00: Enabling discard_zeroes_data
[    7.610694] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    7.681066]  sda: sda1 sda2 sda3
[    7.816374] powernv-cpufreq: cpufreq pstate min 0x63 nominal 0x30 max 0x0
[    7.885728] ata4.00: Enabling discard_zeroes_data
[    8.018861] powernv-cpufreq: Workload Optimized Frequency is enabled in the platform
[    8.089286] sd 3:0:0:0: [sda] supports TCG Opal
[    8.352009] powernv_idle_driver registered
[    8.480156] sd 3:0:0:0: [sda] Attached SCSI removable disk
[    8.867558] ledtrig-cpu: registered to indicate activity on CPUs
[    9.000597] hid: raw HID events driver (C) Jiri Kosina
[    9.130967] usbcore: registered new interface driver usbhid
[    9.261360] usbhid: USB HID core driver
[    9.326932] IPv4 over IPsec tunneling driver
[    9.391895] Initializing XFRM netlink socket
[    9.457396] IPsec XFRM device driver
[    9.521207] NET: Registered PF_INET6 protocol family
[    9.594100] Segment Routing with IPv6
[    9.657087] In-situ OAM (IOAM) with IPv6
[    9.719338] NET: Registered PF_PACKET protocol family
[    9.781418] NET: Registered PF_KEY protocol family
[    9.842551] Key type dns_resolver registered
[    9.903243] drmem: No dynamic reconfiguration memory found
[   10.021547] registered taskstats version 1
[   10.080978] Loading compiled-in X.509 certificates
[   10.141270] zswap: loaded using pool lz4/z3fold
[   10.221126] Key type ._fscrypt registered
[   10.279985] Key type .fscrypt registered
[   10.337077] Key type fscrypt-provisioning registered
[   10.398018] Key type encrypted registered
[   10.453668] Freeing unused kernel image (initmem) memory: 1948K
[   10.560621] Kernel memory protection not selected by kernel config.
[   10.668466] Run /init as init process
[   10.722795]   with arguments:
[   10.722796]     /init
[   10.722796]   with environment:
[   10.722797]     HOME=/
[   10.722798]     TERM=linux
[   11.089194] udevd[848]: starting version 3.2.10
[   11.089499] random: udevd: uninitialized urandom read (16 bytes read)
[   11.089549] random: udevd: uninitialized urandom read (16 bytes read)
[   11.089566] random: udevd: uninitialized urandom read (16 bytes read)
[   11.091888] udevd[849]: starting eudev-3.2.10
[   11.112662] pps_core: LinuxPPS API ver. 1 registered
[   11.112665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   11.112749] xhci_hcd 0003:01:00.0: runtime IRQ mapping not provided by arch
[   11.112792] xhci_hcd 0003:01:00.0: enabling bus mastering
[   11.112798] xhci_hcd 0003:01:00.0: xHCI Host Controller
[   11.112813] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 1
[   11.112923] xhci_hcd 0003:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000
[   11.113390] PTP clock support registered
[   11.113407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[   11.113412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.113415] usb usb1: Product: xHCI Host Controller
[   11.113418] usb usb1: Manufacturer: Linux 5.15.6-gentoo xhci-hcd
[   11.113420] usb usb1: SerialNumber: 0003:01:00.0
[   11.113760] hub 1-0:1.0: USB hub found
[   11.113772] hub 1-0:1.0: 4 ports detected
[   11.114047] xhci_hcd 0003:01:00.0: xHCI Host Controller
[   11.114051] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 2
[   11.114055] xhci_hcd 0003:01:00.0: Host supports USB 3.0 SuperSpeed
[   11.114084] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.114128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[   11.114133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.114137] usb usb2: Product: xHCI Host Controller
[   11.114140] usb usb2: Manufacturer: Linux 5.15.6-gentoo xhci-hcd
[   11.114142] usb usb2: SerialNumber: 0003:01:00.0
[   11.114414] hub 2-0:1.0: USB hub found
[   11.114423] hub 2-0:1.0: 4 ports detected
[   11.118813] tg3 0004:01:00.0: runtime IRQ mapping not provided by arch
[   11.118825] tg3 0004:01:00.0: enabling device (0140 -> 0142)
[   11.118838] tg3 0004:01:00.0: enabling bus mastering
[   11.127550] tg3 0004:01:00.0 eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:09:4a
[   11.127554] tg3 0004:01:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   11.127557] tg3 0004:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   11.127559] tg3 0004:01:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit]
[   11.127563] tg3 0004:01:00.0: saving config space at offset 0x0 (reading 0x165714e4)
[   11.127567] tg3 0004:01:00.0: saving config space at offset 0x4 (reading 0x100146)
[   11.127570] tg3 0004:01:00.0: saving config space at offset 0x8 (reading 0x2000001)
[   11.127573] tg3 0004:01:00.0: saving config space at offset 0xc (reading 0x800000)
[   11.127576] tg3 0004:01:00.0: saving config space at offset 0x10 (reading 0xc)
[   11.127579] tg3 0004:01:00.0: saving config space at offset 0x14 (reading 0x60240)
[   11.127581] tg3 0004:01:00.0: saving config space at offset 0x18 (reading 0x1000c)
[   11.127584] tg3 0004:01:00.0: saving config space at offset 0x1c (reading 0x60240)
[   11.127587] tg3 0004:01:00.0: saving config space at offset 0x20 (reading 0x2000c)
[   11.127590] tg3 0004:01:00.0: saving config space at offset 0x24 (reading 0x60240)
[   11.127593] tg3 0004:01:00.0: saving config space at offset 0x28 (reading 0x0)
[   11.127596] tg3 0004:01:00.0: saving config space at offset 0x2c (reading 0x198114e4)
[   11.127598] tg3 0004:01:00.0: saving config space at offset 0x30 (reading 0x0)
[   11.127601] tg3 0004:01:00.0: saving config space at offset 0x34 (reading 0x48)
[   11.127604] tg3 0004:01:00.0: saving config space at offset 0x38 (reading 0x0)
[   11.127607] tg3 0004:01:00.0: saving config space at offset 0x3c (reading 0x100)
[   11.127673] tg3 0004:01:00.1: runtime IRQ mapping not provided by arch
[   11.127680] tg3 0004:01:00.1: enabling device (0140 -> 0142)
[   11.127689] tg3 0004:01:00.1: enabling bus mastering
[   11.138016] tg3 0004:01:00.1 eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:09:4b
[   11.138020] tg3 0004:01:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   11.138022] tg3 0004:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   11.138025] tg3 0004:01:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit]
[   11.138028] tg3 0004:01:00.1: saving config space at offset 0x0 (reading 0x165714e4)
[   11.138032] tg3 0004:01:00.1: saving config space at offset 0x4 (reading 0x100146)
[   11.138034] tg3 0004:01:00.1: saving config space at offset 0x8 (reading 0x2000001)
[   11.138037] tg3 0004:01:00.1: saving config space at offset 0xc (reading 0x800000)
[   11.138040] tg3 0004:01:00.1: saving config space at offset 0x10 (reading 0x3000c)
[   11.138043] tg3 0004:01:00.1: saving config space at offset 0x14 (reading 0x60240)
[   11.138046] tg3 0004:01:00.1: saving config space at offset 0x18 (reading 0x4000c)
[   11.138049] tg3 0004:01:00.1: saving config space at offset 0x1c (reading 0x60240)
[   11.138052] tg3 0004:01:00.1: saving config space at offset 0x20 (reading 0x5000c)
[   11.138054] tg3 0004:01:00.1: saving config space at offset 0x24 (reading 0x60240)
[   11.138057] tg3 0004:01:00.1: saving config space at offset 0x28 (reading 0x0)
[   11.138060] tg3 0004:01:00.1: saving config space at offset 0x2c (reading 0x198114e4)
[   11.138063] tg3 0004:01:00.1: saving config space at offset 0x30 (reading 0x0)
[   11.138066] tg3 0004:01:00.1: saving config space at offset 0x34 (reading 0x48)
[   11.138068] tg3 0004:01:00.1: saving config space at offset 0x38 (reading 0x0)
[   11.138071] tg3 0004:01:00.1: saving config space at offset 0x3c (reading 0x200)
[   11.138135] tg3 0004:01:00.2: runtime IRQ mapping not provided by arch
[   11.138142] tg3 0004:01:00.2: enabling device (0140 -> 0142)
[   11.138151] tg3 0004:01:00.2: enabling bus mastering
[   11.149140] tg3 0004:01:00.2 eth2: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:09:4c
[   11.149145] tg3 0004:01:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   11.149149] tg3 0004:01:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   11.149153] tg3 0004:01:00.2 eth2: dma_rwctrl[00000000] dma_mask[64-bit]
[   11.149158] tg3 0004:01:00.2: saving config space at offset 0x0 (reading 0x165714e4)
[   11.149163] tg3 0004:01:00.2: saving config space at offset 0x4 (reading 0x100146)
[   11.149167] tg3 0004:01:00.2: saving config space at offset 0x8 (reading 0x2000001)
[   11.149172] tg3 0004:01:00.2: saving config space at offset 0xc (reading 0x800000)
[   11.149176] tg3 0004:01:00.2: saving config space at offset 0x10 (reading 0x6000c)
[   11.149180] tg3 0004:01:00.2: saving config space at offset 0x14 (reading 0x60240)
[   11.149185] tg3 0004:01:00.2: saving config space at offset 0x18 (reading 0x7000c)
[   11.149189] tg3 0004:01:00.2: saving config space at offset 0x1c (reading 0x60240)
[   11.149193] tg3 0004:01:00.2: saving config space at offset 0x20 (reading 0x8000c)
[   11.149197] tg3 0004:01:00.2: saving config space at offset 0x24 (reading 0x60240)
[   11.149201] tg3 0004:01:00.2: saving config space at offset 0x28 (reading 0x0)
[   11.149205] tg3 0004:01:00.2: saving config space at offset 0x2c (reading 0x198114e4)
[   11.149209] tg3 0004:01:00.2: saving config space at offset 0x30 (reading 0x0)
[   11.149214] tg3 0004:01:00.2: saving config space at offset 0x34 (reading 0x48)
[   11.149218] tg3 0004:01:00.2: saving config space at offset 0x38 (reading 0x0)
[   11.149222] tg3 0004:01:00.2: saving config space at offset 0x3c (reading 0x100)
[   11.356818] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[   11.526259] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=49.00
[   11.526265] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   11.526269] usb 1-1: Product: USB Keyboard
[   11.526271] usb 1-1: Manufacturer: Logitech
[   11.909685] input: Logitech USB Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1:1.0/0003:046D:C31C.0001/input/input0
[   11.963579] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0003:01:00.0-1/input0
[   11.977903] input: Logitech USB Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input1
[   12.031484] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0003:01:00.0-1/input1
[   12.146809] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[   12.284638] usb 1-3: New USB device found, idVendor=1d6b, idProduct=0107, bcdDevice= 1.00
[   12.284644] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.284647] usb 1-3: Product: USB Virtual Hub
[   12.284650] usb 1-3: Manufacturer: Aspeed
[   12.284653] usb 1-3: SerialNumber: 00000000
[   12.299594] hub 1-3:1.0: USB hub found
[   12.300419] hub 1-3:1.0: 5 ports detected
[   12.416276] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[   12.548602] usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[   12.548608] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   12.548612] usb 1-4: Product: USB2.0 Hub
[   12.564358] hub 1-4:1.0: USB hub found
[   12.565392] hub 1-4:1.0: 4 ports detected
[   12.611749] usb 1-3.1: new high-speed USB device number 5 using xhci_hcd
[   12.702857] usb 1-3.1: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00
[   12.702863] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.702867] usb 1-3.1: Product: virtual_input
[   12.702870] usb 1-3.1: Manufacturer: OpenBMC
[   12.702873] usb 1-3.1: SerialNumber: OBMC0001
[   12.748865] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1D6B:0104.0003/input/input2
[   12.802510] hid-generic 0003:1D6B:0104.0003: input,hidraw2: USB HID v1.01 Keyboard [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input0
[   12.804464] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:1D6B:0104.0004/input/input3
[   12.806341] hid-generic 0003:1D6B:0104.0004: input,hidraw3: USB HID v1.01 Mouse [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input1
[   12.868282] usb 1-4.4: new full-speed USB device number 6 using xhci_hcd
[   12.978422] usb 1-4.4: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10
[   12.978428] usb 1-4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   12.978432] usb 1-4.4: Product: USB Sound Device        
[   13.000760] input: USB Sound Device         as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.4/1-4.4:1.3/0003:0D8C:0102.0005/input/input4
[   13.052434] hid-generic 0003:0D8C:0102.0005: input,hidraw4: USB HID v1.00 Device [USB Sound Device        ] on usb-0003:01:00.0-4.4/input3
[   21.959000] random: crng init done
[   21.959002] random: 7 urandom warning(s) missed due to ratelimiting
[   51.374275] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   54.040345] tg3 0004:01:00.2 enP4p1s0f2: renamed from eth2
[   54.064690] tg3 0004:01:00.0 enP4p1s0f0: renamed from eth0
[   54.069029] snd_hda_intel 0000:03:00.1: runtime IRQ mapping not provided by arch
[   54.069130] snd_hda_intel 0000:03:00.1: enabling device (0540 -> 0542)
[   54.069143] snd_hda_intel 0000:03:00.1: Force to snoop mode by module option
[   54.069272] snd_hda_intel 0000:03:00.1: enabling bus mastering
[   54.082035] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input5
[   54.082233] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input6
[   54.082362] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input7
[   54.082503] tg3 0004:01:00.1 enP4p1s0f1: renamed from eth1
[   54.082597] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input8
[   54.082755] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input9
[   54.091985] ast 0005:02:00.0: runtime IRQ mapping not provided by arch
[   54.091990] checking generic (600c280010000 300000) vs hw (600c280000000 1000000)
[   54.091993] fb0: switching to ast from OFfb vga
[   54.092164] Console: switching to colour dummy device 80x25
[   54.092334] ast 0005:02:00.0: [drm] platform has no IO space, trying MMIO
[   54.092339] ast 0005:02:00.0: [drm] Using device-tree for configuration
[   54.092341] ast 0005:02:00.0: [drm] AST 2500 detected
[   54.092346] ast 0005:02:00.0: [drm] Using Sil164 TMDS transmitter
[   54.092348] ast 0005:02:00.0: [drm] dram MCLK=800 Mhz type=7 bus_width=16
[   54.092778] [drm] Initialized ast 0.1.0 20120228 for 0005:02:00.0 on minor 0
[   54.126199] Console: switching to colour frame buffer device 64x24
[   54.128989] ast 0005:02:00.0: [drm] fb0: ast frame buffer device
[   54.142354] usb 1-4.4: current rate 30464 is different from the runtime rate 96000
[   54.178849] usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[   54.178854] usb 1-4.4: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
[   54.184837] usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[   54.184842] usb 1-4.4: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
[   54.202087] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[   54.202092] usb 1-4.4: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
[   54.208119] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[   54.208122] usb 1-4.4: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
[   54.214120] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[   54.214123] usb 1-4.4: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
[   54.214406] usbcore: registered new interface driver snd-usb-audio
[   54.260544] [drm] amdgpu kernel modesetting enabled.
[   54.260617] amdgpu: CRAT table disabled by module option
[   54.260619] amdgpu: DSDT table not found for OEM information
[   54.260620] amdgpu: IO link not available for non x86 platforms
[   54.260620] amdgpu: Virtual CRAT table created for CPU
[   54.260630] amdgpu: Topology: Add CPU node
[   54.260667] amdgpu 0000:03:00.0: runtime IRQ mapping not provided by arch
[   54.260699] amdgpu 0000:03:00.0: enabling device (0140 -> 0142)
[   54.260706] [drm] initializing kernel modesetting (DIMGREY_CAVEFISH 0x1002:0x73FF 0x1DA2:0x448E 0xC1).
[   54.260709] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[   54.260716] [drm] register mmio base: 0x00000000
[   54.260717] [drm] register mmio size: 1048576
[   54.260724] [drm] PCIE atomic ops is not supported
[   54.263373] [drm] add ip block number 0 <nv_common>
[   54.263375] [drm] add ip block number 1 <gmc_v10_0>
[   54.263376] [drm] add ip block number 2 <navi10_ih>
[   54.263377] [drm] add ip block number 3 <psp>
[   54.263378] [drm] add ip block number 4 <smu>
[   54.263379] [drm] add ip block number 5 <dm>
[   54.263380] [drm] add ip block number 6 <gfx_v10_0>
[   54.263381] [drm] add ip block number 7 <sdma_v5_2>
[   54.263382] [drm] add ip block number 8 <vcn_v3_0>
[   54.263384] [drm] add ip block number 9 <jpeg_v3_0>
[   54.292567] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from ROM BAR
[   54.292569] amdgpu: ATOM BIOS: 113-3E4480U-S6L
[   54.292575] [drm] VCN(0) decode is enabled in VM mode
[   54.292576] [drm] VCN(0) encode is enabled in VM mode
[   54.292578] [drm] JPEG decode is enabled in VM mode
[   54.292584] [drm] GPU posting now...
[   54.292606] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[   54.292619] amdgpu 0000:03:00.0: BAR 2: releasing [mem 0x6000010000000-0x60000101fffff 64bit pref]
[   54.292622] amdgpu 0000:03:00.0: BAR 0: releasing [mem 0x6000000000000-0x600000fffffff 64bit pref]
[   54.292644] pci 0000:02:00.0: BAR 9: releasing [mem 0x6000000000000-0x600001fffffff 64bit pref]
[   54.292646] pci 0000:01:00.0: BAR 9: releasing [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[   54.292648] pci 0000:00:00.0: BAR 9: releasing [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[   54.292655] pci 0000:00:00.0: BAR 9: assigned [mem 0x6000000000000-0x60002ffffffff 64bit pref]
[   54.292658] pci 0000:01:00.0: BAR 9: assigned [mem 0x6000000000000-0x60002ffffffff 64bit pref]
[   54.292660] pci 0000:02:00.0: BAR 9: assigned [mem 0x6000000000000-0x60002ffffffff 64bit pref]
[   54.292663] amdgpu 0000:03:00.0: BAR 0: assigned [mem 0x6000000000000-0x60001ffffffff 64bit pref]
[   54.292670] amdgpu 0000:03:00.0: BAR 2: assigned [mem 0x6000200000000-0x60002001fffff 64bit pref]
[   54.292677] pci 0000:00:00.0: PCI bridge to [bus 01-03]
[   54.292680] pci 0000:00:00.0:   bridge window [mem 0x600c000000000-0x600c07fefffff]
[   54.292683] pci 0000:00:00.0:   bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[   54.292686] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[   54.292690] pci 0000:01:00.0:   bridge window [mem 0x600c000000000-0x600c07fefffff]
[   54.292692] pci 0000:01:00.0:   bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[   54.292696] pci 0000:02:00.0: PCI bridge to [bus 03]
[   54.292699] pci 0000:02:00.0:   bridge window [mem 0x600c000000000-0x600c0003fffff]
[   54.292702] pci 0000:02:00.0:   bridge window [mem 0x6000000000000-0x60002ffffffff 64bit pref]
[   54.292708] amdgpu 0000:03:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
[   54.292711] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[   54.292713] amdgpu 0000:03:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[   54.292719] [drm] Detected VRAM RAM=8176M, BAR=8192M
[   54.292721] [drm] RAM width 128bits GDDR6
[   54.292723] amdgpu 0000:03:00.0: dma_iommu_get_required_mask: returning bypass mask 0xfffffffffffffff
[   54.292743] [drm] amdgpu: 8176M of VRAM memory ready
[   54.292745] [drm] amdgpu: 8176M of GTT memory ready.
[   54.292756] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   54.299869] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000).
[   54.299887] EEH: Recovering PHB#0-PE#0
[   54.299894] EEH: PE location: UOPWR.D100004-Node0-CPU1 Slot2 (16x), PHB location: N/A
[   54.299896] EEH: Frozen PHB#0-PE#0 detected
[   54.299898] EEH: Call Trace:
[   54.299900] EEH: [00000000d8f2cd19] __eeh_send_failure_event+0x70/0x150
[   54.299910] EEH: [000000006c7f467f] eeh_dev_check_failure+0x2a0/0x5a0
[   54.299993] Loading firmware: amdgpu/dimgrey_cavefish_sos.bin
[   54.299915] EEH: [0000000034ba6bb4] amdgpu_device_rreg+0x110/0x1a0 [amdgpu]
[   54.300096] EEH: [00000000dfc3484f] gfxhub_v2_1_set_fault_enable_default+0x68/0x1a8 [amdgpu]
[   54.300308] EEH: [00000000bac7c600] gmc_v10_0_hw_init+0x148/0x240 [amdgpu]
[   54.300504] EEH: [0000000048f08cc6] amdgpu_device_init+0x1b48/0x20d0 [amdgpu]
[   54.300680] EEH: [0000000077ae1873] amdgpu_driver_load_kms+0x40/0x360 [amdgpu]
[   54.300854] EEH: [000000002256a4e4] amdgpu_pci_probe+0x120/0x250 [amdgpu]
[   54.301025] EEH: [000000009fe4656b] pci_device_probe+0x128/0x210
[   54.301030] EEH: [00000000d92d269a] really_probe.part.0+0xc0/0x410
[   54.301036] EEH: [00000000cd57b8e0] __driver_probe_device+0xd0/0x1c0
[   54.301042] EEH: [0000000072aef1af] driver_probe_device+0x54/0x130
[   54.301047] EEH: [00000000a21fffc5] __driver_attach+0xb4/0x1d0
[   54.301052] EEH: [000000001326fe5b] bus_for_each_dev+0xa0/0x120
[   54.301057] EEH: [0000000030355eae] driver_attach+0x2c/0x40
[   54.301062] EEH: [00000000a5b18611] bus_add_driver+0x160/0x2a0
[   54.301066] EEH: [00000000ff952e7e] driver_register+0xac/0x1c0
[   54.301071] EEH: [000000008b4f48f7] __pci_register_driver+0x60/0x80
[   54.301075] EEH: [00000000956287ff] amdgpu_init+0xa0/0xc8 [amdgpu]
[   54.301294] EEH: [000000006505867e] do_one_initcall+0x64/0x228
[   54.301299] EEH: [00000000247298cd] do_init_module+0x70/0x300
[   54.301304] EEH: [00000000c8816813] __do_sys_finit_module+0xd0/0x120
[   54.301307] EEH: [00000000ba8598e4] system_call_exception+0x184/0x350
[   54.301312] EEH: [0000000009311ac6] system_call_vectored_common+0xe8/0x278
[   54.301318] EEH: This PCI device has failed 1 times in the last hour and will be permanently disabled after 5 failures.
[   54.301321] EEH: Notify device drivers to shutdown
[   54.301324] EEH: Beginning: 'error_detected(IO frozen)'
[   54.302681] Loading firmware: amdgpu/dimgrey_cavefish_ta.bin
[   54.303910] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[   54.303916] Loading firmware: amdgpu/dimgrey_cavefish_smc.bin
[   54.305226] Loading firmware: amdgpu/dimgrey_cavefish_dmcub.bin
[   54.306077] [drm] Loading DMUB firmware via PSP: version=0x02020007
[   54.306084] Loading firmware: amdgpu/dimgrey_cavefish_pfp.bin
[   54.306466] Loading firmware: amdgpu/dimgrey_cavefish_me.bin
[   54.306837] Loading firmware: amdgpu/dimgrey_cavefish_ce.bin
[   54.307141] Loading firmware: amdgpu/dimgrey_cavefish_rlc.bin
[   54.307743] Loading firmware: amdgpu/dimgrey_cavefish_mec.bin
[   54.308442] Loading firmware: amdgpu/dimgrey_cavefish_mec2.bin
[   54.310160] Loading firmware: amdgpu/dimgrey_cavefish_sdma.bin
[   54.310431] [drm] use_doorbell being set to: [true]
[   54.310482] [drm] use_doorbell being set to: [true]
[   54.310531] Loading firmware: amdgpu/dimgrey_cavefish_vcn.bin
[   54.313046] [drm] Found VCN firmware Version ENC: 1.16 DEC: 2 VEP: 0 Revision: 1
[   54.313054] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[   54.314153] amdgpu 0000:03:00.0: enabling bus mastering
[   54.570938] [drm:psp_hw_start [amdgpu]] *ERROR* PSP create ring failed!
[   54.571061] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[   54.571175] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[   54.571277] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_init failed
[   54.571279] amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init
[   54.571282] amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
[   54.572789] amdgpu: probe of 0000:03:00.0 failed with error -22
[   54.572916] BUG: Unable to handle kernel data access on write at 0xc00a0002becfe000
[   54.572918] Faulting instruction address: 0xc008000003777e28
[   54.572920] Oops: Kernel access of bad area, sig: 11 [#1]
[   54.574363] LE PAGE_SIZE=4K MMU=Radix SMP NR_CPUS=32 PowerNV
[   54.575814] Modules linked in: amdgpu(+) ast drm_vram_helper drm_ttm_helper ttm mfd_core gpu_sched i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi snd_usb_audio snd_hda_intel syscopyarea sysfillrect snd_intel_dspcfg sysimgblt fb_sys_fops snd_hda_codec snd_usbmidi_lib snd_rawmidi drm crct10dif_vpmsum snd_hwdep input_leds snd_seq_device led_class snd_hda_core snd_pcm snd_timer drm_panel_orientation_quirks snd soundcore crc32c_vpmsum tg3 ptp pps_core xhci_pci xhci_pci_renesas
[   54.582577] CPU: 18 PID: 1861 Comm: systemd-udevd Not tainted 5.15.6-gentoo #3
[   54.584501] NIP:  c008000003777e28 LR: c008000003777de4 CTR: c000000000178f60
[   54.586539] REGS: c000000028d0b390 TRAP: 0300   Not tainted  (5.15.6-gentoo)
[   54.588598] MSR:  900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 28222888  XER: 20040004
[   54.590708] CFAR: c00800000188b6a4 DAR: c00a0002becfe000 DSISR: 42000000 IRQMASK: 0 
               GPR00: c008000003777de4 c000000028d0b630 c008000003b94000 0000000000000001 
               GPR04: c000000028d0b654 00000000000000d2 0000000000000000 0000000000000001 
               GPR08: 0000000000000000 0000000000000000 c00a0002becfe000 c0080000018d01e0 
               GPR12: c000000000178f60 c000000fff7f0600 0000000020000000 0000000000020000 
               GPR16: 0000000000000000 0000000000000000 00000000000f4240 0000000137d73a10 
               GPR20: 0000000137d73a38 000000015b7b9040 c000000022296a40 c000000022286128 
               GPR24: c000000022286148 c000000022286150 c000000022286140 0000000000000000 
               GPR28: c000000022290000 c000000022280000 c000000022290000 c000000022280000 
[   54.610255] NIP [c008000003777e28] vcn_v3_0_sw_fini+0x80/0x130 [amdgpu]
[   54.612515] LR [c008000003777de4] vcn_v3_0_sw_fini+0x3c/0x130 [amdgpu]
[   54.614776] Call Trace:
[   54.615833] [c000000028d0b630] [c008000003777de4] vcn_v3_0_sw_fini+0x3c/0x130 [amdgpu] (unreliable)
[   54.618080] [c000000028d0b670] [c00800000360622c] amdgpu_device_fini_sw+0x124/0x390 [amdgpu]
[   54.620290] [c000000028d0b720] [c00800000360e08c] amdgpu_driver_release_kms+0x24/0x50 [amdgpu]
[   54.622494] [c000000028d0b750] [c00800000188c018] devm_drm_dev_init_release+0x80/0xf0 [drm]
[   54.624605] [c000000028d0b780] [c0000000007f4b78] devm_action_release+0x28/0x40
[   54.626719] [c000000028d0b7a0] [c0000000007f6fa4] devres_release_all+0xd4/0x170
[   54.628813] [c000000028d0b810] [c0000000007edfa8] really_probe.part.0+0x218/0x410
[   54.630912] [c000000028d0b8a0] [c0000000007ee270] __driver_probe_device+0xd0/0x1c0
[   54.633027] [c000000028d0b8e0] [c0000000007ee3b4] driver_probe_device+0x54/0x130
[   54.635138] [c000000028d0b920] [c0000000007eed94] __driver_attach+0xb4/0x1d0
[   54.637272] [c000000028d0b960] [c0000000007ea7b0] bus_for_each_dev+0xa0/0x120
[   54.639419] [c000000028d0b9c0] [c0000000007ed29c] driver_attach+0x2c/0x40
[   54.641588] [c000000028d0b9e0] [c0000000007eca50] bus_add_driver+0x160/0x2a0
[   54.643764] [c000000028d0ba70] [c0000000007ef9ec] driver_register+0xac/0x1c0
[   54.645982] [c000000028d0bae0] [c0000000006f9c80] __pci_register_driver+0x60/0x80
[   54.648207] [c000000028d0bb00] [c008000003a2662c] amdgpu_init+0xa0/0xc8 [amdgpu]
[   54.650538] [c000000028d0bb70] [c0000000000113e4] do_one_initcall+0x64/0x228
[   54.652711] [c000000028d0bc40] [c0000000001b77c0] do_init_module+0x70/0x300
[   54.654899] [c000000028d0bcd0] [c0000000001bba20] __do_sys_finit_module+0xd0/0x120
[   54.657106] [c000000028d0bdb0] [c0000000000296c4] system_call_exception+0x184/0x350
[   54.659358] [c000000028d0be10] [c00000000000c1e8] system_call_vectored_common+0xe8/0x278
[   54.661604] --- interrupt: 3000 at 0x3fff92fe6234
[   54.662701] NIP:  00003fff92fe6234 LR: 0000000000000000 CTR: 0000000000000000
[   54.664848] REGS: c000000028d0be80 TRAP: 3000   Not tainted  (5.15.6-gentoo)
[   54.666983] MSR:  900000000200d033 <SF,HV,VEC,EE,PR,ME,IR,DR,RI,LE>  CR: 48222242  XER: 00000000
[   54.669133] IRQMASK: 0 
               GPR00: 0000000000000161 00003ffffd083e60 00003fff930c9000 0000000000000018 
               GPR04: 000000015b7bc4a0 0000000000000000 0000000000000018 0000000000000000 
               GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 
               GPR12: 0000000000000000 00003fff933d2220 0000000020000000 0000000000020000 
               GPR16: 0000000000000000 0000000000000000 00000000000f4240 0000000137d73a10 
               GPR20: 0000000137d73a38 000000015b7b9040 0000000137d739c0 000000015b7bc700 
               GPR24: 000000015b7bc4a0 000000015b7b9040 0000000000000006 000000015b7bb4b0 
               GPR28: 000000015b7bc4a0 0000000000020000 0000000000000000 000000015b7b9040 
[   54.686617] NIP [00003fff92fe6234] 0x3fff92fe6234
[   54.687674] LR [0000000000000000] 0x0
[   54.688714] --- interrupt: 3000
[   54.689712] Instruction dump:
[   54.690682] 4182004c 39000000 38e00001 815e273c 7ce94030 7d295038 2c090000 4082001c 
[   54.692598] 1d480cb0 7d5f5214 3d4a0001 e94a1a08 <912a0000> 992a0041 895e0d61 39280001 
[   54.694560] ---[ end trace 7e43dc59d4a8b2ce ]---
Top
R0b0t1
Apprentice
Apprentice
Posts: 264
Joined: Thu Jun 05, 2008 9:26 pm

  • Quote

Post by R0b0t1 » Wed Dec 08, 2021 1:18 am

Apologize for the long posts, but I don't seem to have an attach option. Here's some PCIe setup that happens before. When I tried a 5700xt earlier it would not work either, and I could not place it as a driver issue or as a PCIe issue. I've tried disabling the onboard VGA on the BMC PCIe to PCIe bridge, but this results in me not being able to interact with my system and seems to not be necessary.

Code: Select all

[    0.000000] dt-cpu-ftrs: setup for ISA 3000
[    0.000000] dt-cpu-ftrs: final cpu/mmu features = 0x0001f86b8f5fb187 0x3c007041
[    0.000000] radix-mmu: Page sizes from device-tree:
[    0.000000] radix-mmu: Page size shift = 12 AP=0x0
[    0.000000] radix-mmu: Page size shift = 16 AP=0x5
[    0.000000] radix-mmu: Page size shift = 21 AP=0x1
[    0.000000] radix-mmu: Page size shift = 30 AP=0x2
[    0.000000] Activating Kernel Userspace Execution Prevention
[    0.000000] Activating Kernel Userspace Access Prevention
[    0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000000040000000 with 1.00 GiB pages (exec)
[    0.000000] radix-mmu: Mapped 0x0000000040000000-0x0000001000000000 with 1.00 GiB pages
[    0.000000] radix-mmu: Initializing Radix MMU
[    0.000000] Linux version 5.15.6-gentoo (root@silver) (gcc (Gentoo 11.2.0 p1) 11.2.0, GNU ld (Gentoo 2.37_p1 p0) 2.37) #3 SMP Tue Dec 7 17:35:12 EST 2021
[    0.000000] Found initrd at 0xc0000000038b0000:0xc0000000044bc06c
[    0.000000] OPAL: Found memory mapped LPC bus on chip 0
[    0.000000] ISA: Non-PCI bridge is /lpcm-opb@6030000000000/lpc@0
[    0.000000] Using PowerNV machine description
[    0.000000] CPU maps initialized for 4 threads per core
[    0.000000]  (thread shift is 2)
[    0.000000] Allocated 2816 bytes for 32 pacas
[    0.000000] -----------------------------------------------------
[    0.000000] phys_mem_size     = 0x1000000000
[    0.000000] dcache_bsize      = 0x80
[    0.000000] icache_bsize      = 0x80
[    0.000000] cpu_features      = 0x0001f86b8f5fb187
[    0.000000]   possible        = 0x000ffbfbcf5fb187
[    0.000000]   always          = 0x0000000380008181
[    0.000000] cpu_user_features = 0xdc0065c2 0xaef00000
[    0.000000] mmu_features      = 0x3c007641
[    0.000000] firmware_features = 0x0000000010000000
[    0.000000] vmalloc start     = 0xc008000000000000
[    0.000000] IO start          = 0xc00a000000000000
[    0.000000] vmemmap start     = 0xc00c000000000000
[    0.000000] -----------------------------------------------------
[    0.000000] kvm_cma_reserve: reserving 3276 MiB for global area
[    0.000000] cma: Reserved 3280 MiB at 0x0000000100000000
[    0.000000] rfi-flush: mttrig type flush available
[    0.000000] rfi-flush: patched 13 locations (mttrig type flush)
[    0.000000] count-cache-flush: flush disabled.
[    0.000000] link-stack-flush: software flush enabled.
[    0.000000] entry-flush: patched 59 locations (mttrig type flush)
[    0.000000] uaccess-flush: patched 1 locations (mttrig type flush)
[    0.000000] stf-barrier: eieio barrier available
[    0.000000] stf-barrier: patched 59 entry locations (eieio barrier)
[    0.000000] stf-barrier: patched 13 exit locations (eieio barrier)
[    0.000000] OPAL nvram setup, 589824 bytes
[    0.000000] barrier-nospec: using ORI speculation barrier
[    0.000000] barrier-nospec: patched 349 locations
[    0.000000] Top of RAM: 0x1000000000, Total RAM: 0x1000000000
[    0.000000] Memory hole size: 0MB
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000fffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000fffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000fffffffff]
[    0.000000] percpu: Embedded 20 pages/cpu s42264 r0 d39656 u81920
[    0.000000] pcpu-alloc: s42264 r0 d39656 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 
[    0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 
[    0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16515072
[    0.000000] Kernel command line: root= ro amdgpu.aspm=0
[    0.000000] printk: log_buf_len individual max cpu contribution: 8192 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 253952 bytes
[    0.000000] printk: log_buf_len min size: 262144 bytes
[    0.000000] printk: log_buf_len: 524288 bytes
[    0.000000] printk: early log buf free: 258304(98%)
[    0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] mem auto-init: stack:__user(zero), heap alloc:on, heap free:off
[    0.000000] Memory: 0K/67108864K available (12668K kernel code, 1656K rwdata, 3044K rodata, 1948K init, 833K bss, 1302984K reserved, 3358720K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x620 with crng_init=0
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] xive: Interrupt handling initialized with native backend
[    0.000000] xive: Using priority 7 for all interrupts
[    0.000000] xive: Using 4kB queues
[    0.000000] time_init: decrementer frequency = 512.000000 MHz
[    0.000000] time_init: processor frequency   = 3000.000000 MHz
[    0.000002] time_init: 56 bit decrementer (max: 7fffffffffffff)
[    0.000007] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
[    0.000013] clocksource: timebase mult[1f40000] shift[24] registered
[    0.000023] clockevent: decrementer mult[83126f] shift[24] cpu[0]
[    0.000258] Console: colour dummy device 80x25
[    0.000548] printk: console [tty0] enabled
[    0.000567] pid_max: default: 32768 minimum: 301
[    0.000620] LSM: Security Framework initializing
[    0.000631] Yama: becoming mindful.
[    0.000719] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000794] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.001465] POWER9 performance monitor hardware support registered
[    0.001508] rcu: Hierarchical SRCU implementation.
[    0.002474] smp: Bringing up secondary CPUs ...
[    0.011365] smp: Brought up 1 node, 32 CPUs
[    0.499857] node 0 deferred pages initialised in 487ms
[    0.500743] devtmpfs: initialized
[    0.509617] Initializing IODA2 PHB (/pciex@600c3c0000000)
[    0.509663] PCI host bridge /pciex@600c3c0000000 (primary) ranges:
[    0.509681]  MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000 
[    0.509719]  MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31)
[    0.509730]  Using M64 #31 as default window
[    0.509755]   512 (511) PE's M32: 0x80000000 [segment=0x400000]
[    0.509763]                  M64: 0x4000000000 [segment=0x20000000]
[    0.509772]   Allocated bitmap for 4088 MSIs (base IRQ 0xfe000)
[    0.510298] Initializing IODA2 PHB (/pciex@600c3c0100000)
[    0.510349] PCI host bridge /pciex@600c3c0100000  ranges:
[    0.510363]  MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000 
[    0.510394]  MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15)
[    0.510404]  Using M64 #15 as default window
[    0.510419]   256 (255) PE's M32: 0x80000000 [segment=0x800000]
[    0.510427]                  M64: 0x4000000000 [segment=0x40000000]
[    0.510435]   Allocated bitmap for 2040 MSIs (base IRQ 0xfd800)
[    0.510775] Initializing IODA2 PHB (/pciex@600c3c0200000)
[    0.510826] PCI host bridge /pciex@600c3c0200000  ranges:
[    0.510840]  MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000 
[    0.510871]  MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15)
[    0.510881]  Using M64 #15 as default window
[    0.510896]   256 (255) PE's M32: 0x80000000 [segment=0x800000]
[    0.510904]                  M64: 0x4000000000 [segment=0x40000000]
[    0.510911]   Allocated bitmap for 2040 MSIs (base IRQ 0xfd000)
[    0.511247] Initializing IODA2 PHB (/pciex@600c3c0300000)
[    0.511300] PCI host bridge /pciex@600c3c0300000  ranges:
[    0.511313]  MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000 
[    0.511344]  MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31)
[    0.511354]  Using M64 #31 as default window
[    0.511375]   512 (511) PE's M32: 0x80000000 [segment=0x400000]
[    0.511383]                  M64: 0x4000000000 [segment=0x20000000]
[    0.511390]   Allocated bitmap for 4088 MSIs (base IRQ 0xfc000)
[    0.511896] Initializing IODA2 PHB (/pciex@600c3c0400000)
[    0.511944] PCI host bridge /pciex@600c3c0400000  ranges:
[    0.511958]  MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000 
[    0.511989]  MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15)
[    0.511999]  Using M64 #15 as default window
[    0.512013]   256 (255) PE's M32: 0x80000000 [segment=0x800000]
[    0.512021]                  M64: 0x4000000000 [segment=0x40000000]
[    0.512028]   Allocated bitmap for 2040 MSIs (base IRQ 0xfb800)
[    0.512372] Initializing IODA2 PHB (/pciex@600c3c0500000)
[    0.512417] PCI host bridge /pciex@600c3c0500000  ranges:
[    0.512430]  MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000 
[    0.512461]  MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15)
[    0.512471]  Using M64 #15 as default window
[    0.512486]   256 (255) PE's M32: 0x80000000 [segment=0x800000]
[    0.512493]                  M64: 0x4000000000 [segment=0x40000000]
[    0.512501]   Allocated bitmap for 2040 MSIs (base IRQ 0xfb000)
[    0.512990] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.513064] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear)
[    0.534867] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.535055] audit: initializing netlink subsys (disabled)
[    0.535150] audit: type=2000 audit(1638917836.533:1): state=initialized audit_enabled=0 res=1
[    0.535280] thermal_sys: Registered thermal governor 'step_wise'
[    0.535544] cpuidle: using governor menu
[    0.536216] EEH: PowerNV platform initialized
[    0.540611] PCI: Probing PCI hardware
[    0.540825] PCI host bridge to bus 0000:00
[    0.540834] pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff])
[    0.540847] pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
[    0.540858] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.540867] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[    0.540877] pci_bus 0000:00: scanning bus
[    0.540928] pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400
[    0.541118] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.541131] pci 0000:00:00.0: PME# disabled
[    0.543934] pci_bus 0000:00: fixups for bus
[    0.543941] pci 0000:00:00.0: scanning [bus 01-03] behind bridge, pass 0
[    0.544002] pci_bus 0000:01: scanning bus
[    0.544068] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400
[    0.544105] pci 0000:01:00.0: reg 0x10: [mem 0x600c000400000-0x600c000403fff]
[    0.544364] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.544377] pci 0000:01:00.0: PME# disabled
[    0.547228] pci_bus 0000:01: fixups for bus
[    0.547232] pci 0000:00:00.0: PCI bridge to [bus 01-03]
[    0.547266] pci 0000:01:00.0: scanning [bus 02-03] behind bridge, pass 0
[    0.547350] pci_bus 0000:02: scanning bus
[    0.547403] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400
[    0.547674] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.547686] pci 0000:02:00.0: PME# disabled
[    0.550488] pci_bus 0000:02: fixups for bus
[    0.550491] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[    0.550530] pci 0000:02:00.0: scanning [bus 03-03] behind bridge, pass 0
[    0.550610] pci_bus 0000:03: scanning bus
[    0.550673] pci 0000:03:00.0: [1002:73ff] type 00 class 0x030000
[    0.550713] pci 0000:03:00.0: reg 0x10: [mem 0x6000000000000-0x600000fffffff 64bit pref]
[    0.550742] pci 0000:03:00.0: reg 0x18: [mem 0x6000010000000-0x60000101fffff 64bit pref]
[    0.550762] pci 0000:03:00.0: reg 0x20: [io  0x0000-0x00ff]
[    0.550781] pci 0000:03:00.0: reg 0x24: [mem 0x600c000000000-0x600c0000fffff]
[    0.550800] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.551023] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.551035] pci 0000:03:00.0: PME# disabled
[    0.551206] pci 0000:03:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:00:00.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.551341] pci 0000:03:00.1: [1002:ab28] type 00 class 0x040300
[    0.551376] pci 0000:03:00.1: reg 0x10: [mem 0x600c000120000-0x600c000123fff]
[    0.551605] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.551618] pci 0000:03:00.1: PME# disabled
[    0.554425] pci_bus 0000:03: fixups for bus
[    0.554428] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.554464] pci_bus 0000:03: bus scan returning with max=03
[    0.554472] pci 0000:02:00.0: scanning [bus 03-03] behind bridge, pass 1
[    0.554482] pci_bus 0000:02: bus scan returning with max=03
[    0.554490] pci 0000:01:00.0: scanning [bus 02-03] behind bridge, pass 1
[    0.554500] pci_bus 0000:01: bus scan returning with max=03
[    0.554508] pci 0000:00:00.0: scanning [bus 01-03] behind bridge, pass 1
[    0.554519] pci_bus 0000:00: bus scan returning with max=03
[    0.554523] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[    0.554656] PCI host bridge to bus 0001:00
[    0.554664] pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff])
[    0.554675] pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
[    0.554686] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.554694] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[    0.554703] pci_bus 0001:00: scanning bus
[    0.554742] pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400
[    0.554912] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    0.554925] pci 0001:00:00.0: PME# disabled
[    0.557676] pci_bus 0001:00: fixups for bus
[    0.557682] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.557743] pci_bus 0001:01: scanning bus
[    0.560336] pci_bus 0001:01: fixups for bus
[    0.560339] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.560365] pci_bus 0001:01: bus scan returning with max=01
[    0.560373] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.560385] pci_bus 0001:00: bus scan returning with max=ff
[    0.560388] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[    0.560534] PCI host bridge to bus 0002:00
[    0.560542] pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff])
[    0.560554] pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
[    0.560564] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.560572] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[    0.560581] pci_bus 0002:00: scanning bus
[    0.560619] pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400
[    0.560799] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[    0.560811] pci 0002:00:00.0: PME# disabled
[    0.563561] pci_bus 0002:00: fixups for bus
[    0.563568] pci 0002:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[    0.563628] pci_bus 0002:01: scanning bus
[    0.563671] pci 0002:01:00.0: [1b4b:9235] type 00 class 0x010601
[    0.563707] pci 0002:01:00.0: reg 0x10: [io  0x8000-0x8007]
[    0.563730] pci 0002:01:00.0: reg 0x14: [io  0x8040-0x8043]
[    0.563752] pci 0002:01:00.0: reg 0x18: [io  0x8100-0x8107]
[    0.563775] pci 0002:01:00.0: reg 0x1c: [io  0x8140-0x8143]
[    0.563797] pci 0002:01:00.0: reg 0x20: [io  0x800000-0x80001f]
[    0.563819] pci 0002:01:00.0: reg 0x24: [mem 0x600c100000000-0x600c1000007ff]
[    0.563843] pci 0002:01:00.0: reg 0x30: [mem 0x600c150000000-0x600c15000ffff pref]
[    0.563880] pci 0002:01:00.0: BAR5 [mem size 0x00000800]: requesting alignment to 0x1000
[    0.563977] pci 0002:01:00.0: PME# supported from D3hot
[    0.563989] pci 0002:01:00.0: PME# disabled
[    0.566729] pci_bus 0002:01: fixups for bus
[    0.566733] pci 0002:00:00.0: PCI bridge to [bus 01]
[    0.566758] pci_bus 0002:01: bus scan returning with max=01
[    0.566770] pci 0002:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[    0.566781] pci_bus 0002:00: bus scan returning with max=01
[    0.566785] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
[    0.566926] PCI host bridge to bus 0003:00
[    0.566934] pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff])
[    0.566945] pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
[    0.566956] pci_bus 0003:00: root bus resource [bus 00-ff]
[    0.566963] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff
[    0.566973] pci_bus 0003:00: scanning bus
[    0.567010] pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400
[    0.567189] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
[    0.567201] pci 0003:00:00.0: PME# disabled
[    0.569954] pci_bus 0003:00: fixups for bus
[    0.569961] pci 0003:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[    0.570021] pci_bus 0003:01: scanning bus
[    0.570066] pci 0003:01:00.0: [104c:8241] type 00 class 0x0c0330
[    0.570112] pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c18000ffff 64bit]
[    0.570145] pci 0003:01:00.0: reg 0x18: [mem 0x600c180010000-0x600c180011fff 64bit]
[    0.570331] pci 0003:01:00.0: supports D1 D2
[    0.570338] pci 0003:01:00.0: PME# supported from D0 D1 D2 D3hot
[    0.570351] pci 0003:01:00.0: PME# disabled
[    0.573108] pci_bus 0003:01: fixups for bus
[    0.573112] pci 0003:00:00.0: PCI bridge to [bus 01]
[    0.573137] pci_bus 0003:01: bus scan returning with max=01
[    0.573145] pci 0003:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[    0.573156] pci_bus 0003:00: bus scan returning with max=01
[    0.573160] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01
[    0.573329] PCI host bridge to bus 0004:00
[    0.573336] pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff])
[    0.573348] pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
[    0.573358] pci_bus 0004:00: root bus resource [bus 00-ff]
[    0.573366] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff
[    0.573375] pci_bus 0004:00: scanning bus
[    0.573413] pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400
[    0.573593] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
[    0.573605] pci 0004:00:00.0: PME# disabled
[    0.576355] pci_bus 0004:00: fixups for bus
[    0.576361] pci 0004:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[    0.576424] pci_bus 0004:01: scanning bus
[    0.576479] pci 0004:01:00.0: [14e4:1657] type 00 class 0x020000
[    0.576527] pci 0004:01:00.0: reg 0x10: [mem 0x6024000000000-0x602400000ffff 64bit pref]
[    0.576561] pci 0004:01:00.0: reg 0x18: [mem 0x6024000010000-0x602400001ffff 64bit pref]
[    0.576595] pci 0004:01:00.0: reg 0x20: [mem 0x6024000020000-0x602400002ffff 64bit pref]
[    0.576807] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold
[    0.576820] pci 0004:01:00.0: PME# disabled
[    0.576928] pci 0004:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0004:00:00.0 (capable of 16.000 Gb/s with 5.0 GT/s PCIe x4 link)
[    0.577066] pci 0004:01:00.1: [14e4:1657] type 00 class 0x020000
[    0.577114] pci 0004:01:00.1: reg 0x10: [mem 0x6024000030000-0x602400003ffff 64bit pref]
[    0.577148] pci 0004:01:00.1: reg 0x18: [mem 0x6024000040000-0x602400004ffff 64bit pref]
[    0.577182] pci 0004:01:00.1: reg 0x20: [mem 0x6024000050000-0x602400005ffff 64bit pref]
[    0.577399] pci 0004:01:00.1: PME# supported from D0 D3hot D3cold
[    0.577411] pci 0004:01:00.1: PME# disabled
[    0.577619] pci 0004:01:00.2: [14e4:1657] type 00 class 0x020000
[    0.577667] pci 0004:01:00.2: reg 0x10: [mem 0x6024000060000-0x602400006ffff 64bit pref]
[    0.577701] pci 0004:01:00.2: reg 0x18: [mem 0x6024000070000-0x602400007ffff 64bit pref]
[    0.577736] pci 0004:01:00.2: reg 0x20: [mem 0x6024000080000-0x602400008ffff 64bit pref]
[    0.577952] pci 0004:01:00.2: PME# supported from D0 D3hot D3cold
[    0.577965] pci 0004:01:00.2: PME# disabled
[    0.580753] pci_bus 0004:01: fixups for bus
[    0.580756] pci 0004:00:00.0: PCI bridge to [bus 01]
[    0.580782] pci_bus 0004:01: bus scan returning with max=01
[    0.580790] pci 0004:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[    0.580802] pci_bus 0004:00: bus scan returning with max=01
[    0.580805] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01
[    0.580987] PCI host bridge to bus 0005:00
[    0.580995] pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff])
[    0.581006] pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
[    0.581017] pci_bus 0005:00: root bus resource [bus 00-ff]
[    0.581024] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff
[    0.581034] pci_bus 0005:00: scanning bus
[    0.581072] pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400
[    0.581252] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
[    0.581264] pci 0005:00:00.0: PME# disabled
[    0.584018] pci_bus 0005:00: fixups for bus
[    0.584024] pci 0005:00:00.0: scanning [bus 01-02] behind bridge, pass 0
[    0.584085] pci_bus 0005:01: scanning bus
[    0.584129] pci 0005:01:00.0: [1a03:1150] type 01 class 0x060400
[    0.584370] pci 0005:01:00.0: supports D1 D2
[    0.584377] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.584390] pci 0005:01:00.0: PME# disabled
[    0.587143] pci_bus 0005:01: fixups for bus
[    0.587146] pci 0005:00:00.0: PCI bridge to [bus 01-02]
[    0.587175] pci 0005:01:00.0: scanning [bus 02-02] behind bridge, pass 0
[    0.587249] pci_bus 0005:02: extended config space not accessible
[    0.587281] pci_bus 0005:02: scanning bus
[    0.587309] pci 0005:02:00.0: [1a03:2000] type 00 class 0x030000
[    0.587349] pci 0005:02:00.0: reg 0x10: [mem 0x600c280000000-0x600c280ffffff]
[    0.587375] pci 0005:02:00.0: reg 0x14: [mem 0x600c281000000-0x600c28101ffff]
[    0.587400] pci 0005:02:00.0: reg 0x18: [io  0x0000-0x007f]
[    0.587550] pci 0005:02:00.0: supports D1 D2
[    0.587557] pci 0005:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.587571] pci 0005:02:00.0: PME# disabled
[    0.590250] pci_bus 0005:02: fixups for bus
[    0.590253] pci 0005:01:00.0: PCI bridge to [bus 02]
[    0.590287] pci_bus 0005:02: bus scan returning with max=02
[    0.590295] pci 0005:01:00.0: scanning [bus 02-02] behind bridge, pass 1
[    0.590306] pci_bus 0005:01: bus scan returning with max=02
[    0.590313] pci 0005:00:00.0: scanning [bus 01-02] behind bridge, pass 1
[    0.590325] pci_bus 0005:00: bus scan returning with max=02
[    0.590328] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 02
[    0.590351] pci 0000:00:00.0: BAR 9: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref]
[    0.590362] pci 0000:00:00.0: BAR 8: assigned [mem 0x600c000000000-0x600c0007fffff]
[    0.590372] pci 0000:00:00.0: BAR 7: no space for [io  size 0x1000]
[    0.590381] pci 0000:00:00.0: BAR 7: failed to assign [io  size 0x1000]
[    0.590392] pci 0000:01:00.0: BAR 9: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref]
[    0.590403] pci 0000:01:00.0: BAR 8: assigned [mem 0x600c000000000-0x600c0003fffff]
[    0.590413] pci 0000:01:00.0: BAR 0: assigned [mem 0x600c000400000-0x600c000403fff]
[    0.590431] pci 0000:01:00.0: BAR 7: no space for [io  size 0x1000]
[    0.590440] pci 0000:01:00.0: BAR 7: failed to assign [io  size 0x1000]
[    0.590450] pci 0000:02:00.0: BAR 9: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref]
[    0.590460] pci 0000:02:00.0: BAR 8: assigned [mem 0x600c000000000-0x600c0003fffff]
[    0.590470] pci 0000:02:00.0: BAR 7: no space for [io  size 0x1000]
[    0.590478] pci 0000:02:00.0: BAR 7: failed to assign [io  size 0x1000]
[    0.590489] pci 0000:03:00.0: BAR 0: assigned [mem 0x6000000000000-0x600000fffffff 64bit pref]
[    0.590513] pci 0000:03:00.0: BAR 2: assigned [mem 0x6000010000000-0x60000101fffff 64bit pref]
[    0.590537] pci 0000:03:00.0: BAR 5: assigned [mem 0x600c000000000-0x600c0000fffff]
[    0.590551] pci 0000:03:00.0: BAR 6: assigned [mem 0x600c000100000-0x600c00011ffff pref]
[    0.590561] pci 0000:03:00.1: BAR 0: assigned [mem 0x600c000120000-0x600c000123fff]
[    0.590575] pci 0000:03:00.0: BAR 4: no space for [io  size 0x0100]
[    0.590583] pci 0000:03:00.0: BAR 4: failed to assign [io  size 0x0100]
[    0.590601] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.590614] pci 0000:02:00.0:   bridge window [mem 0x600c000000000-0x600c0003fffff]
[    0.590627] pci 0000:02:00.0:   bridge window [mem 0x6000000000000-0x600001fffffff 64bit pref]
[    0.590644] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[    0.590658] pci 0000:01:00.0:   bridge window [mem 0x600c000000000-0x600c07fefffff]
[    0.590671] pci 0000:01:00.0:   bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[    0.590688] pci 0000:00:00.0: PCI bridge to [bus 01-03]
[    0.590700] pci 0000:00:00.0:   bridge window [mem 0x600c000000000-0x600c07fefffff]
[    0.590713] pci 0000:00:00.0:   bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[    0.590729] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.590739] pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff]
[    0.590748] pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
[    0.590758] pci_bus 0000:01: resource 1 [mem 0x600c000000000-0x600c07fefffff]
[    0.590768] pci_bus 0000:01: resource 2 [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[    0.590777] pci_bus 0000:02: resource 1 [mem 0x600c000000000-0x600c07fefffff]
[    0.590786] pci_bus 0000:02: resource 2 [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
[    0.590796] pci_bus 0000:03: resource 1 [mem 0x600c000000000-0x600c0003fffff]
[    0.590805] pci_bus 0000:03: resource 2 [mem 0x6000000000000-0x600001fffffff 64bit pref]
[    0.590816] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.590839] pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff]
[    0.590848] pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
[    0.590860] pci 0002:00:00.0: BAR 8: assigned [mem 0x600c100000000-0x600c1007fffff]
[    0.590870] pci 0002:00:00.0: BAR 7: no space for [io  size 0x1000]
[    0.590878] pci 0002:00:00.0: BAR 7: failed to assign [io  size 0x1000]
[    0.590889] pci 0002:01:00.0: BAR 6: assigned [mem 0x600c100000000-0x600c10000ffff pref]
[    0.590899] pci 0002:01:00.0: BAR 5: assigned [mem 0x600c100010000-0x600c1000107ff]
[    0.590913] pci 0002:01:00.0: BAR 4: no space for [io  size 0x0020]
[    0.590921] pci 0002:01:00.0: BAR 4: failed to assign [io  size 0x0020]
[    0.590934] pci 0002:01:00.0: BAR 0: no space for [io  size 0x0008]
[    0.590942] pci 0002:01:00.0: BAR 0: failed to assign [io  size 0x0008]
[    0.590951] pci 0002:01:00.0: BAR 2: no space for [io  size 0x0008]
[    0.590959] pci 0002:01:00.0: BAR 2: failed to assign [io  size 0x0008]
[    0.590968] pci 0002:01:00.0: BAR 1: no space for [io  size 0x0004]
[    0.590976] pci 0002:01:00.0: BAR 1: failed to assign [io  size 0x0004]
[    0.590984] pci 0002:01:00.0: BAR 3: no space for [io  size 0x0004]
[    0.590992] pci 0002:01:00.0: BAR 3: failed to assign [io  size 0x0004]
[    0.591002] pci 0002:00:00.0: PCI bridge to [bus 01]
[    0.591015] pci 0002:00:00.0:   bridge window [mem 0x600c100000000-0x600c17fefffff]
[    0.591034] pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.591043] pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff]
[    0.591052] pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
[    0.591062] pci_bus 0002:01: resource 1 [mem 0x600c100000000-0x600c17fefffff]
[    0.591073] pci 0003:00:00.0: BAR 8: assigned [mem 0x600c180000000-0x600c1803fffff]
[    0.591084] pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c18000ffff 64bit]
[    0.591110] pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180010000-0x600c180011fff 64bit]
[    0.591135] pci 0003:00:00.0: PCI bridge to [bus 01]
[    0.591148] pci 0003:00:00.0:   bridge window [mem 0x600c180000000-0x600c1ffefffff]
[    0.591166] pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff]
[    0.591176] pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
[    0.591186] pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff]
[    0.591197] pci 0004:00:00.0: BAR 9: assigned [mem 0x6024000000000-0x602403fffffff 64bit pref]
[    0.591210] pci 0004:01:00.0: BAR 0: assigned [mem 0x6024000000000-0x602400000ffff 64bit pref]
[    0.591236] pci 0004:01:00.0: BAR 2: assigned [mem 0x6024000010000-0x602400001ffff 64bit pref]
[    0.591261] pci 0004:01:00.0: BAR 4: assigned [mem 0x6024000020000-0x602400002ffff 64bit pref]
[    0.591287] pci 0004:01:00.1: BAR 0: assigned [mem 0x6024000030000-0x602400003ffff 64bit pref]
[    0.591313] pci 0004:01:00.1: BAR 2: assigned [mem 0x6024000040000-0x602400004ffff 64bit pref]
[    0.591339] pci 0004:01:00.1: BAR 4: assigned [mem 0x6024000050000-0x602400005ffff 64bit pref]
[    0.591365] pci 0004:01:00.2: BAR 0: assigned [mem 0x6024000060000-0x602400006ffff 64bit pref]
[    0.591391] pci 0004:01:00.2: BAR 2: assigned [mem 0x6024000070000-0x602400007ffff 64bit pref]
[    0.591417] pci 0004:01:00.2: BAR 4: assigned [mem 0x6024000080000-0x602400008ffff 64bit pref]
[    0.591444] pci 0004:00:00.0: PCI bridge to [bus 01]
[    0.591459] pci 0004:00:00.0:   bridge window [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
[    0.591476] pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff]
[    0.591485] pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
[    0.591495] pci_bus 0004:01: resource 2 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
[    0.591507] pci 0005:00:00.0: BAR 8: assigned [mem 0x600c280000000-0x600c2817fffff]
[    0.591517] pci 0005:00:00.0: BAR 7: no space for [io  size 0x1000]
[    0.591525] pci 0005:00:00.0: BAR 7: failed to assign [io  size 0x1000]
[    0.591535] pci 0005:01:00.0: BAR 8: assigned [mem 0x600c280000000-0x600c2817fffff]
[    0.591545] pci 0005:01:00.0: BAR 7: no space for [io  size 0x1000]
[    0.591553] pci 0005:01:00.0: BAR 7: failed to assign [io  size 0x1000]
[    0.591563] pci 0005:02:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c280ffffff]
[    0.591578] pci 0005:02:00.0: BAR 1: assigned [mem 0x600c281000000-0x600c28101ffff]
[    0.591592] pci 0005:02:00.0: BAR 2: no space for [io  size 0x0080]
[    0.591600] pci 0005:02:00.0: BAR 2: failed to assign [io  size 0x0080]
[    0.591610] pci 0005:01:00.0: PCI bridge to [bus 02]
[    0.591623] pci 0005:01:00.0:   bridge window [mem 0x600c280000000-0x600c2ffefffff]
[    0.591643] pci 0005:00:00.0: PCI bridge to [bus 01-02]
[    0.591656] pci 0005:00:00.0:   bridge window [mem 0x600c280000000-0x600c2ffefffff]
[    0.591675] pci_bus 0005:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.591684] pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff]
[    0.591694] pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
[    0.591703] pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
[    0.591713] pci_bus 0005:02: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
[    0.591723] pci_bus 0000:00: Configuring PE for bus
[    0.591730] pci 0000:00     : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
[    0.591948] pci 0000:00:00.0: Configured PE#1fe
[    0.591997] pci_bus 0000:01: Configuring PE for bus
[    0.592008] pci 0000:01     : [PE# 1fd] Secondary bus 0x0000000000000001 associated with PE#1fd
[    0.592222] pci 0000:01:00.0: Configured PE#1fd
[    0.592324] pci_bus 0000:02: Configuring PE for bus
[    0.592334] pci 0000:02     : [PE# 1fc] Secondary bus 0x0000000000000002 associated with PE#1fc
[    0.592547] pci 0000:02:00.0: Configured PE#1fc
[    0.592614] pci_bus 0000:03: Configuring PE for bus
[    0.592626] pci 0000:03     : [PE# 00] Secondary bus 0x0000000000000003 associated with PE#0
[    0.592841] pci 0000:03:00.0: Configured PE#0
[    0.592848] pci 0000:03     : [PE# 00] Setting up 32-bit TCE table at 0..80000000
[    0.606252] IOMMU table initialized, virtual merging enabled
[    0.606261] pci 0000:03     : [PE# 00] Setting up window#0 0..fffffffff pg=1000
[    0.606276] pci 0000:03     : [PE# 00] Enabling 64-bit DMA bypass
[    0.606298] pci 0000:03:00.0: Adding to iommu group 0
[    0.606374] pci 0000:03:00.1: Added to existing PE#0
[    0.606384] pci 0000:03:00.1: Adding to iommu group 0
[    0.606467] pci_bus 0001:00: Configuring PE for bus
[    0.606474] pci 0001:00     : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
[    0.606685] pci 0001:00:00.0: Configured PE#fe
[    0.606729] pci_bus 0002:00: Configuring PE for bus
[    0.606736] pci 0002:00     : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
[    0.606946] pci 0002:00:00.0: Configured PE#fe
[    0.606994] pci_bus 0002:01: Configuring PE for bus
[    0.607003] pci 0002:01     : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd
[    0.607215] pci 0002:01:00.0: Configured PE#fd
[    0.607222] pci 0002:01     : [PE# fd] Setting up 32-bit TCE table at 0..80000000
[    0.620620] pci 0002:01     : [PE# fd] Setting up window#0 0..fffffffff pg=1000
[    0.620634] pci 0002:01     : [PE# fd] Enabling 64-bit DMA bypass
[    0.620654] pci 0002:01:00.0: Adding to iommu group 1
[    0.620743] pci_bus 0003:00: Configuring PE for bus
[    0.620751] pci 0003:00     : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
[    0.620962] pci 0003:00:00.0: Configured PE#1fe
[    0.621008] pci_bus 0003:01: Configuring PE for bus
[    0.621018] pci 0003:01     : [PE# 1fd] Secondary bus 0x0000000000000001 associated with PE#1fd
[    0.621231] pci 0003:01:00.0: Configured PE#1fd
[    0.621238] pci 0003:01     : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000
[    0.634643] pci 0003:01     : [PE# 1fd] Setting up window#0 0..fffffffff pg=1000
[    0.634657] pci 0003:01     : [PE# 1fd] Enabling 64-bit DMA bypass
[    0.634679] pci 0003:01:00.0: Adding to iommu group 2
[    0.634775] pci_bus 0004:00: Configuring PE for bus
[    0.634782] pci 0004:00     : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
[    0.634993] pci 0004:00:00.0: Configured PE#fe
[    0.635039] pci_bus 0004:01: Configuring PE for bus
[    0.635063] pci 0004:01     : [PE# 00] Secondary bus 0x0000000000000001 associated with PE#0
[    0.635274] pci 0004:01:00.0: Configured PE#0
[    0.635281] pci 0004:01     : [PE# 00] Setting up 32-bit TCE table at 0..80000000
[    0.648674] pci 0004:01     : [PE# 00] Setting up window#0 0..fffffffff pg=1000
[    0.648688] pci 0004:01     : [PE# 00] Enabling 64-bit DMA bypass
[    0.648707] pci 0004:01:00.0: Adding to iommu group 3
[    0.648819] pci 0004:01:00.1: Added to existing PE#0
[    0.648829] pci 0004:01:00.1: Adding to iommu group 3
[    0.648935] pci 0004:01:00.2: Added to existing PE#0
[    0.648945] pci 0004:01:00.2: Adding to iommu group 3
[    0.649040] pci_bus 0005:00: Configuring PE for bus
[    0.649047] pci 0005:00     : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
[    0.649258] pci 0005:00:00.0: Configured PE#fe
[    0.649303] pci_bus 0005:01: Configuring PE for bus
[    0.649312] pci 0005:01     : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd
[    0.649524] pci 0005:01:00.0: Configured PE#fd
[    0.649619] pci_bus 0005:02: Configuring PE for bus
[    0.649628] pci 0005:02     : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc
[    0.649843] pci 0005:02:00.0: Configured PE#fc
[    0.649850] pci 0005:02     : [PE# fc] Setting up 32-bit TCE table at 0..80000000
[    0.663256] pci 0005:02     : [PE# fc] Setting up window#0 0..fffffffff pg=1000
[    0.663270] pci 0005:02     : [PE# fc] Enabling 64-bit DMA bypass
[    0.663289] pci 0005:02:00.0: Adding to iommu group 4
[    0.663410] pci 0000:00:00.0: enabling device (0101 -> 0103)
[    0.663425] pci 0000:00:00.0: enabling bus mastering
[    0.663442] pci 0000:01:00.0: enabling device (0141 -> 0143)
[    0.663460] pci 0000:01:00.0: enabling bus mastering
[    0.663472] pci 0000:02:00.0: enabling device (0141 -> 0143)
[    0.663488] pci 0000:02:00.0: enabling bus mastering
[    0.663499] pci 0002:00:00.0: enabling device (0101 -> 0103)
[    0.663512] pci 0002:00:00.0: enabling bus mastering
[    0.663523] pci 0003:00:00.0: enabling device (0101 -> 0103)
[    0.663536] pci 0003:00:00.0: enabling bus mastering
[    0.663547] pci 0004:00:00.0: enabling device (0101 -> 0103)
[    0.663560] pci 0004:00:00.0: enabling bus mastering
[    0.663570] pci 0005:00:00.0: enabling device (0101 -> 0103)
[    0.663584] pci 0005:00:00.0: enabling bus mastering
[    0.663596] pci 0005:01:00.0: enabling device (0141 -> 0143)
[    0.663613] pci 0005:01:00.0: enabling bus mastering
Top
mike155
Advocate
Advocate
Posts: 4438
Joined: Fri Sep 17, 2010 11:33 pm
Location: Frankfurt, Germany

  • Quote

Post by mike155 » Wed Dec 08, 2021 4:10 am

You could use wgetpaste to post long files. :)

The lines below seem to be the critical lines, right?

Code: Select all

[   54.313046] [drm] Found VCN firmware Version ENC: 1.16 DEC: 2 VEP: 0 Revision: 1
[   54.313054] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[   54.314153] amdgpu 0000:03:00.0: enabling bus mastering
[   54.570938] [drm:psp_hw_start [amdgpu]] *ERROR* PSP create ring failed!
[   54.571061] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[   54.571175] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[   54.571277] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_init failed
[   54.571279] amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init
[   54.571282] amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
[   54.572789] amdgpu: probe of 0000:03:00.0 failed with error -22
Google has found a similar case: https://gitlab.freedesktop.org/drm/amd/-/issues/1519.
Top
R0b0t1
Apprentice
Apprentice
Posts: 264
Joined: Thu Jun 05, 2008 9:26 pm

  • Quote

Post by R0b0t1 » Wed Dec 08, 2021 11:59 pm

Yes, those are probably the critical lines. wgetpaste tends to disappear. I might use it in the future, but I figured the whole thing may be important.

Does anyone have a freedesktop tracker account to bump that bug? I can't seem to register.

There's a Raptor CS forum that I am looking at. I may post there. There have been lots of amdgpu regressions, apparently.
Top
Post Reply

4 posts • Page 1 of 1

Return to “Kernel & Hardware”

Jump to
  • Assistance
  • ↳   News & Announcements
  • ↳   Frequently Asked Questions
  • ↳   Installing Gentoo
  • ↳   Multimedia
  • ↳   Desktop Environments
  • ↳   Networking & Security
  • ↳   Kernel & Hardware
  • ↳   Portage & Programming
  • ↳   Gamers & Players
  • ↳   Other Things Gentoo
  • ↳   Unsupported Software
  • Discussion & Documentation
  • ↳   Documentation, Tips & Tricks
  • ↳   Gentoo Chat
  • ↳   Gentoo Forums Feedback
  • ↳   Duplicate Threads
  • International Gentoo Users
  • ↳   中文 (Chinese)
  • ↳   Dutch
  • ↳   Finnish
  • ↳   French
  • ↳   Deutsches Forum (German)
  • ↳   Diskussionsforum
  • ↳   Deutsche Dokumentation
  • ↳   Greek
  • ↳   Forum italiano (Italian)
  • ↳   Forum di discussione italiano
  • ↳   Risorse italiane (documentazione e tools)
  • ↳   Polskie forum (Polish)
  • ↳   Instalacja i sprzęt
  • ↳   Polish OTW
  • ↳   Portuguese
  • ↳   Documentação, Ferramentas e Dicas
  • ↳   Russian
  • ↳   Scandinavian
  • ↳   Spanish
  • ↳   Other Languages
  • Architectures & Platforms
  • ↳   Gentoo on ARM
  • ↳   Gentoo on PPC
  • ↳   Gentoo on Sparc
  • ↳   Gentoo on Alternative Architectures
  • ↳   Gentoo on AMD64
  • ↳   Gentoo for Mac OS X (Portage for Mac OS X)
  • Board index
  • All times are UTC
  • Delete cookies

© 2001–2026 Gentoo Foundation, Inc.

Powered by phpBB® Forum Software © phpBB Limited

Privacy Policy

 

 

magic