Forums

Skip to content

Advanced search
  • Quick links
    • Unanswered topics
    • Active topics
    • Search
  • FAQ
  • Login
  • Register
  • Board index Assistance Kernel & Hardware
  • Search

Is Gentoo hard on nvme and ssd drives?

Kernel not recognizing your hardware? Problems with power management or PCMCIA? What hardware is compatible with Gentoo? See here. (Only for kernels supported by Gentoo.)
Post Reply
Advanced search
29 posts
  • 1
  • 2
  • Next
Author
Message
C1REX
l33t
l33t
User avatar
Posts: 788
Joined: Fri Jan 02, 2004 2:07 am
Location: Poland/UK

Is Gentoo hard on nvme and ssd drives?

  • Quote

Post by C1REX » Mon Feb 10, 2020 12:32 pm

People say that life span (read/write) of solid state/nvme drives is not a concern for regular people.

So how about gentoo users who very heavily use disk if not compiling in tmpfs?
CLICK HERE to help move gentoo up on distrowatch.

If you like Gentoo you can thank devs here - https://www.gentoo.org/donate/
Top
Ionen
Developer
Developer
User avatar
Posts: 3014
Joined: Thu Dec 06, 2018 2:23 pm

  • Quote

Post by Ionen » Mon Feb 10, 2020 12:41 pm

Unless we're talking something small (like 8-16GB where the same sectors would constantly get rewritten) or something very old and inefficient, then no.

Certainly can't be worse than all those huge VM images I keep moving in/out the ssd and backing up and reverting :roll:

My old 128GB ssd I abused for 9 years is still entirely fine (except for a dumb firmware bug that made it stop working early at a mere 2k hours uptime that a firmware upgrade fixed), but retired due to larger NVMe drives showing it the door.. and the larger they are, the less of an impact a little space use building on them will have.
Top
NeddySeagoon
Administrator
Administrator
User avatar
Posts: 56101
Joined: Sat Jul 05, 2003 9:37 am
Location: 56N 3W

  • Quote

Post by NeddySeagoon » Mon Feb 10, 2020 1:03 pm

C1REX,

There is anecdotal evidence suggesting that early SSDs would not survive a Gentoo install.

Newer drives being both larger and with wear levelling should not be a problem.
Wear levelling moves around things that never change too.
The concept of a partition being a number of contiguous blocks does not exist in an SSD.

I would be a bit nervous of the latest four bits per cell SSDs but that's the way things are moving.
More bits per cell, means reduced erase cycles and reduced cells per SSD which means lower cost products.
More bits per cell also means slower write speeds, which may be compensated for by various caches ... or not.

In short, its not a problem any more.
Gentoos arm64 build box has a 350G SSD

Code: Select all

=== START OF INFORMATION SECTION ===
Device Model:     INTEL SSDSCKHB340G4

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       24822
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       2129413
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       1552020
Several users do nothing but build on that box and its several years old now.

Notice that the Total_LBAs_Written in larger than Total_LBAs_Read. That will be all the writes that are never read due to the kernel virtual memory system caching whatever it can.
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Top
saellaven
l33t
l33t
Posts: 677
Joined: Sun Jul 23, 2006 4:24 am

  • Quote

Post by saellaven » Mon Feb 10, 2020 4:33 pm

You might find this topic interesting

SSD wear poll (Gentoo root disk only!)

You'll find that a lot of us don't have any issues with our SSDs

To update my own drives from there

This is my root drive (installed Feb 17, 2016)

Code: Select all

Device Model:     Samsung SSD 850 EVO 250GB
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       34855
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       47
177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       8
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   071   052   000    Old_age   Always       -       29
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       27
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       7099321901

This is for my games (installed August 28, 2017)

Code: Select all

Device Model:     Samsung SSD 850 EVO 500GB
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       21474
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       36
177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       2
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   071   045   000    Old_age   Always       -       29
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       12
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       2493235045
Granted, I have 32 GB of RAM (but compile with -j16) and have -pipe set in my CFLAGS, but as you can see, my Wear_Leveling_Count on both drives is pretty low and neither drive has had a block fail or had to dip into reserved blocks. Needless to say, both drives still have a lot of life left.

As Neddy points out be wary of how many cells the drives use to store data. The fewer cells written, the longer it takes to wear them out and the longer the write lifetime of the drive (in Samsung SSD terminology, PRO = 2 bits, EVO = 3 bits, and QVO = 4 bits).
Ryzen 3700X, Asus Prime X570-Pro, 64 GB DDR4 3200, GeForce GTX 1660 Super
openrc-0.17, ~vanilla-sources, ~nvidia-drivers, ~gcc
Top
C1REX
l33t
l33t
User avatar
Posts: 788
Joined: Fri Jan 02, 2004 2:07 am
Location: Poland/UK

  • Quote

Post by C1REX » Mon Feb 10, 2020 5:28 pm

saellaven wrote: As Neddy points out be wary of how many cells the drives use to store data. The fewer cells written, the longer it takes to wear them out and the longer the write lifetime of the drive (in Samsung SSD terminology, PRO = 2 bits, EVO = 3 bits, and QVO = 4 bits).
Interesting info.
Do you know how can I check if some budget options like this have small or big cells?

https://www.amazon.co.uk/Sabrent-Rocket ... 157&sr=1-4

This one says you can decide how big is sector size? Is it possibile?
Are 4 bits disks prone to dying early or it's still not likely for regular humans like me?
CLICK HERE to help move gentoo up on distrowatch.

If you like Gentoo you can thank devs here - https://www.gentoo.org/donate/
Top
NeddySeagoon
Administrator
Administrator
User avatar
Posts: 56101
Joined: Sat Jul 05, 2003 9:37 am
Location: 56N 3W

  • Quote

Post by NeddySeagoon » Mon Feb 10, 2020 5:52 pm

C1REX,

Whats interesting is the

Code: Select all

Device Model:     Samsung SSD 850 EVO 250GB
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE 
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       7099321901
from saellavens post.

A 250GB drive contains 61035156 4kB write blocks. With 7099321901 blocks written, that's 116 disk fulls.
If the wear levelling were perfect, each block has been erased 116 times. Its erasing that kills SSDs, which is a necessary evil before writing.

4 bit cells can be rated as low as 300 erase cycles, so saellavens drive were a 4 bit cell type, (its not) it would have used about 1/3 of its life expectancy.
As its a 3bit cell device, it is expected to last over 1000 erase cycles, so its used about 1/10 of its life expectancy.

We also know

Code: Select all

Device Model:     Samsung SSD 850 EVO 250GB
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       34855 
So with saellavens use pattern, a 4bit cell drive would be expected to run about 100,000 hours and a 3 bit cell drive about 350,000 hours.
At 10 hours a day, that's 27 years and 96 years before cell wearout.

The question then becomes do you expect to be using that drive in 27 years or 96 years?
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Top
C1REX
l33t
l33t
User avatar
Posts: 788
Joined: Fri Jan 02, 2004 2:07 am
Location: Poland/UK

  • Quote

Post by C1REX » Mon Feb 10, 2020 7:27 pm

NeddySeagoon wrote: So with saellavens use pattern, a 4bit cell drive would be expected to run about 100,000 hours and a 3 bit cell drive about 350,000 hours.
At 10 hours a day, that's 27 years and 96 years before cell wearout.

The question then becomes do you expect to be using that drive in 27 years or 96 years?

The last sentence made me smile :)

I'm a regular person who just likes more. I don't need 3950x but I want one. I don't need or can afford a 3990x but also would love to have one :)
There is a huge gap in my life between what I need and what I desire.
CLICK HERE to help move gentoo up on distrowatch.

If you like Gentoo you can thank devs here - https://www.gentoo.org/donate/
Top
Naib
Watchman
Watchman
User avatar
Posts: 6101
Joined: Fri May 21, 2004 9:42 pm
Location: Removed by Neddy
Contact:
Contact Naib
Website

  • Quote

Post by Naib » Mon Feb 10, 2020 11:17 pm

My advice? buy a cheap 100Gig SSD and use it for /var/tmp. Will it wear out? sure eventually just like a mechanical drive will break. The key then is a sacrificial drive
When I initially converted to SSD I kept a rotational drive for /var/tmp. When I rebuilt and went M.2 I used one of the old SSD for my /var/tmp

Code: Select all

lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda           8:0    0 238.5G  0 disk 
└─sda1        8:1    0 238.5G  0 part /var/tmp
nvme0n1     259:0    0 931.5G  0 disk 
├─nvme0n1p1 259:1    0   130M  0 part 
└─nvme0n1p2 259:2    0 931.4G  0 part /

at some point this ssd will fail and it will only be build errors not my data
#define HelloWorld int
#define Int main()
#define Return printf
#define Print return
#include <stdio>
HelloWorld Int {
Return("Hello, world!\n");
Print 0;
Top
NeddySeagoon
Administrator
Administrator
User avatar
Posts: 56101
Joined: Sat Jul 05, 2003 9:37 am
Location: 56N 3W

  • Quote

Post by NeddySeagoon » Mon Feb 10, 2020 11:30 pm

I have /var/tmp in RAM but thats getting to be a squeeze for a few packages now as my motherboard is maxed out at 16G RAM.
Build logs go to /var/log/portage, so I don't lose build errors at power off.
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Top
Tony0945
Watchman
Watchman
Posts: 5127
Joined: Tue Jul 25, 2006 12:19 am
Location: Illinois, USA

  • Quote

Post by Tony0945 » Tue Feb 11, 2020 1:23 am

NeddySeagoon wrote:I have /var/tmp in RAM but thats getting to be a squeeze for a few packages now as my motherboard is maxed out at 16G RAM.
Building the Palemoon browser (takes 9G) and soon a few more on the Ryzen 2700X PC that I upgraded from 16 to 32G RAM along with it being about five times faster than the next best machine, a Phenom II maxed out with 8G RAM. I believe you still have one of those also.
I followed your advice on the forum and waited to buy the 2700X until after the 3000 series came out. That missed all the pain of the initial 1000 series rollout.
If I do retire the Phenom II this year, I'll wait until the 4000 series comes out, reportedly in mid-year, and buy a 3900X, maybe with 64G, more likely with 32G in two slots with two slots free.

Seems crazy after my first PC, a 486DX-100 with an amazing 16 Meg of RAM!
Top
NeddySeagoon
Administrator
Administrator
User avatar
Posts: 56101
Joined: Sat Jul 05, 2003 9:37 am
Location: 56N 3W

  • Quote

Post by NeddySeagoon » Tue Feb 11, 2020 2:03 am

Tony0945,

My Phenom II is maxed out at 16GRAM and creaking under the strain. Its also 11 years old in April and overdue retirement.
I have a Ryzen on my shopping list 'soon'. I can't really justify a Threadripper and my budget won't stretch to a Power9 system.
I have not seen any arm64 boxes for sensible money either. I'm not set on x86.

Building on a 96 core box shows that very few packages can use as many as 30 threads, so a 32 thread box is enough.
That indicates 64G RAM to start with.

A 32 tread Ryzen, on a motherboard that will take 128G RAM (or more) with 64G fitted looks like a good starting point.
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Top
Tony0945
Watchman
Watchman
Posts: 5127
Joined: Tue Jul 25, 2006 12:19 am
Location: Illinois, USA

  • Quote

Post by Tony0945 » Tue Feb 11, 2020 2:15 am

NeddySeagoon wrote:A 32 tread Ryzen, on a motherboard that will take 128G RAM (or more) with 64G fitted looks like a good starting point.
Any ideas on a mobo? or at least a manufacturer? I've mostly had MSI & Gigabyte but the recent sound fiasco leaves me sour on MSI, although BIOS upgrades are super easy.
Been looking at Gigabyte but they lean heavily to Windows, MSI is more OS agnostic. Reviews say the Gigabyte is more Intel oriented and their Ryzen boards are Windows-Centric.
Many swear by Asus, but it looks to me like you are paying for a name. But I'm drifting way off topic, should have posted this in a Ryzen thread.
Top
C1REX
l33t
l33t
User avatar
Posts: 788
Joined: Fri Jan 02, 2004 2:07 am
Location: Poland/UK

  • Quote

Post by C1REX » Tue Feb 11, 2020 4:28 pm

Tony0945 wrote:
NeddySeagoon wrote:A 32 tread Ryzen, on a motherboard that will take 128G RAM (or more) with 64G fitted looks like a good starting point.
Any ideas on a mobo? or at least a manufacturer? I've mostly had MSI & Gigabyte but the recent sound fiasco leaves me sour on MSI, although BIOS upgrades are super easy.
Been looking at Gigabyte but they lean heavily to Windows, MSI is more OS agnostic. Reviews say the Gigabyte is more Intel oriented and their Ryzen boards are Windows-Centric.
Many swear by Asus, but it looks to me like you are paying for a name. But I'm drifting way off topic, should have posted this in a Ryzen thread.

I'm not an expert but on PC Builds YouTube channels and Reddit people recommend MSI Tomahawk MAX almost exclusively if going for b450 chip.
For more expensive x570 there is no simple pick but many recommend ASUS x570 TUF.
CLICK HERE to help move gentoo up on distrowatch.

If you like Gentoo you can thank devs here - https://www.gentoo.org/donate/
Top
NeddySeagoon
Administrator
Administrator
User avatar
Posts: 56101
Joined: Sat Jul 05, 2003 9:37 am
Location: 56N 3W

  • Quote

Post by NeddySeagoon » Tue Feb 11, 2020 4:42 pm

Tony0945,

I've only used ASUS for years.

Knowing how hard a life the Vcore regulator gets, the determinant for me is what quality parts go into that.
I've seen poorer quality ones fail bun not since the time when the Pentium II was old.
I think thats the last time I chaged the caps too. :)

If you are building with an eye to the future, you need the x570 chipset so you can have PCIe ver 4.
PCIe ver 3 will be fine today and probably tomorrow but what about the day after?

My spec so far is
x570 chipset
High quality Vcore parts.
>=128G Max RAM.
32 threads
Lots of spare slots becaue I keep running out.

That boils down to a high end Ryzen or a Threadripper of some sort.
The Threadripper being a siamised Ryzen. provides more PCIE lanes.
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Top
C1REX
l33t
l33t
User avatar
Posts: 788
Joined: Fri Jan 02, 2004 2:07 am
Location: Poland/UK

  • Quote

Post by C1REX » Tue Feb 11, 2020 5:11 pm

I've heard that ASUS TUF x570 gets the same vcore as the top end models. Some say that ASUS made a mistake with this board and the price is too low for the spec.
It wins in temperature tests in that price range.

I might be biased as I ordered one from Amazon. I like WiFi version with cabled antena for better reach.
CLICK HERE to help move gentoo up on distrowatch.

If you like Gentoo you can thank devs here - https://www.gentoo.org/donate/
Top
NeddySeagoon
Administrator
Administrator
User avatar
Posts: 56101
Joined: Sat Jul 05, 2003 9:37 am
Location: 56N 3W

  • Quote

Post by NeddySeagoon » Tue Feb 11, 2020 5:36 pm

C1REX,

Wifi is an attack vector. The household Android devices will not be on the same network as our PCs
My paranoid firewall already blocks lots of attempts from them to phone home on strange ports for undeclared purposes.
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Top
saellaven
l33t
l33t
Posts: 677
Joined: Sun Jul 23, 2006 4:24 am

  • Quote

Post by saellaven » Wed Feb 12, 2020 3:33 am

I went with an Asus Prime x570-Pro and have been very happy with it and my 3700x. It's been rock stable for me.

and the 3700x, compared to my old FX-8350 it replaced, is crazy fast with 8 cores/16 threads.
Ryzen 3700X, Asus Prime X570-Pro, 64 GB DDR4 3200, GeForce GTX 1660 Super
openrc-0.17, ~vanilla-sources, ~nvidia-drivers, ~gcc
Top
Tony0945
Watchman
Watchman
Posts: 5127
Joined: Tue Jul 25, 2006 12:19 am
Location: Illinois, USA

  • Quote

Post by Tony0945 » Wed Feb 12, 2020 3:39 am

NeddySeagoon wrote:If you are building with an eye to the future, you need the x570 chipset so you can have PCIe ver 4.
PCIe ver 3 will be fine today and probably tomorrow but what about the day after?
I had been planning on a B450 because I'm not a gamer and have no need for two video cards, but you raise a valid point about future peripherals.

Also I have been thinking of maybe needing lots of "rotating rust" for storage, perhaps RAID. The x570 would give more SATA ports.
I am planning on NVME for the system drive, although I'm pleased with the SATA SSD on my newest system.
Top
Tony0945
Watchman
Watchman
Posts: 5127
Joined: Tue Jul 25, 2006 12:19 am
Location: Illinois, USA

  • Quote

Post by Tony0945 » Wed Feb 12, 2020 4:16 am

saellaven wrote:I went with an Asus Prime x570-Pro and have been very happy with it and my 3700x. It's been rock stable for me.
I'm looking right now at (in order of increasing cost)

1) ASUS Prime X570P
2) ASUS TUF Gaming X570 Plus
3) MSI MPG X570 Gaming Plus
4) ASUS Prime x570 Pro
From least expensive to most expensive is a $100 range which is less than a dollar a month over 11 years (might outlast me!) which is nothing. Even amortizing over a year, it's negligible.

Major differences I see are the LAN chip, number of SATA's, and WOL. WOL not mentioned for your board, although it is the most expensive.
Cheapest board doesn't have as high a user rating. Don't know about things like VRM's and Linux support for sensors.
Did you go with yours for the intel LAN? I don't care about the pretty lights, it's a computer, not an art work.
I had a colleague that bought a few Asus. he could never tune the BIOS.
Top
saellaven
l33t
l33t
Posts: 677
Joined: Sun Jul 23, 2006 4:24 am

  • Quote

Post by saellaven » Wed Feb 12, 2020 4:16 am

Tony0945 wrote:
NeddySeagoon wrote:If you are building with an eye to the future, you need the x570 chipset so you can have PCIe ver 4.
PCIe ver 3 will be fine today and probably tomorrow but what about the day after?
I had been planning on a B450 because I'm not a gamer and have no need for two video cards, but you raise a valid point about future peripherals.

Also I have been thinking of maybe needing lots of "rotating rust" for storage, perhaps RAID. The x570 would give more SATA ports.
I am planning on NVME for the system drive, although I'm pleased with the SATA SSD on my newest system.
The Prime x570 pro supports 6 SATA drives, has 2 M.2 slots, 2 PCI 4.0 16x slots (plus more PCI slots), supports 128 GB of RAM, a ton of USB 3.2 ports, etc. I picked it because of just how much life I think I can get out of it.
Ryzen 3700X, Asus Prime X570-Pro, 64 GB DDR4 3200, GeForce GTX 1660 Super
openrc-0.17, ~vanilla-sources, ~nvidia-drivers, ~gcc
Top
saellaven
l33t
l33t
Posts: 677
Joined: Sun Jul 23, 2006 4:24 am

  • Quote

Post by saellaven » Wed Feb 12, 2020 4:25 am

Tony0945 wrote:
saellaven wrote:I went with an Asus Prime x570-Pro and have been very happy with it and my 3700x. It's been rock stable for me.
I'm looking right now at (in order of increasing cost)

1) ASUS Prime X570P
2) ASUS TUF Gaming X570 Plus
3) MSI MPG X570 Gaming Plus
4) ASUS Prime x570 Pro
From least expensive to most expensive is a $100 range which is less than a dollar a month over 11 years (might outlast me!) which is nothing. Even amortizing over a year, it's negligible.

Major differences I see are the LAN chip, number of SATA's, and WOL. WOL not mentioned for your board, although it is the most expensive.
Cheapest board doesn't have as high a user rating. Don't know about things like VRM's and Linux support for sensors.
Did you go with yours for the intel LAN? I don't care about the pretty lights, it's a computer, not an art work.
I had a colleague that bought a few Asus. he could never tune the BIOS.
I don't use it, but the Prime x570 Pro does support WOL.

I went with mine specifically for the features and how long I plan to have it for - I seem to get around 6-8 years out of my systems before I feel the need for a major overhaul (I may add RAM, more storage, upgrade the video card, but I don't see any pressing need to upgrade beyond the capabilities of a 3700x right now, so the core of this system will last a while).

And, while I sicken myself with this fact sometimes, I typically drop $30-40 a day on lunch for my employee and myself out of my personal pocket, so what's an extra $100 or so as a one time cost?
Ryzen 3700X, Asus Prime X570-Pro, 64 GB DDR4 3200, GeForce GTX 1660 Super
openrc-0.17, ~vanilla-sources, ~nvidia-drivers, ~gcc
Top
Goverp
Advocate
Advocate
User avatar
Posts: 2404
Joined: Wed Mar 07, 2007 6:41 pm

  • Quote

Post by Goverp » Wed Feb 12, 2020 11:01 am

My new box is a Ryzen 3900X in an ASUS TUF x570. I chose that mb 'cos it was the cheapest one from my local supplier (i.e. a real shop, not mail order) that supports ECC memory. IIRC, with 16 GB ram, you can expect 5 bits/hour flipped by cosmic rays. OK, most of them will be 0's in unallocated or unused memory, but every so often one will be significant.

Having installed it, my first impressions are that it's well build and laid out. If you're paranoid, you might worry that its BIOS can call home to download an upgrade. I did that immediately after installing; in theory it will only do it when I ask, but well, for all I know, Crypto AG might own ASUS :-)
Greybeard
Top
C1REX
l33t
l33t
User avatar
Posts: 788
Joined: Fri Jan 02, 2004 2:07 am
Location: Poland/UK

  • Quote

Post by C1REX » Wed Feb 12, 2020 11:29 am

Goverp wrote:My new box is a Ryzen 3900X in an ASUS TUF x570. I chose that mb 'cos it was the cheapest one from my local supplier (i.e. a real shop, not mail order) that supports ECC memory. IIRC, with 16 GB ram, you can expect 5 bits/hour flipped by cosmic rays. OK, most of them will be 0's in unallocated or unused memory, but every so often one will be significant.

I already have the board and consider the same CPU. How long does it take for your system to compile popular big stuff? How much better is it vs your older setup?
CLICK HERE to help move gentoo up on distrowatch.

If you like Gentoo you can thank devs here - https://www.gentoo.org/donate/
Top
Tony0945
Watchman
Watchman
Posts: 5127
Joined: Tue Jul 25, 2006 12:19 am
Location: Illinois, USA

  • Quote

Post by Tony0945 » Wed Feb 12, 2020 2:01 pm

NeddySeagoon wrote:Wifi is an attack vector. The household Android devices will not be on the same network as our PCs
My paranoid firewall already blocks lots of attempts from them to phone home on strange ports for undeclared purposes.
Scary! I do leave the battery out of the control on my one Alexa-enabled Amazon Firestick and the Samsung "Smart" TV is not connected to the LAN.
I use MAC address filtering although many people tell me that's useless. The router has an internal timer for the wireless and I have it set to be active only during evening hours when we typically stream video. I have enough old PC's strewn around the house to not need wifi to connect to the internet. A minimalist Gentoo can at least turn a very old PC into a smart terminal. Really really old things like the k6-3 AT need an add-in card to get gigabit LAN but they are available new for what saellaven (and I) spend for lunch in a sitdown restaurant.
Top
dimko
Apprentice
Apprentice
User avatar
Posts: 207
Joined: Sun Feb 12, 2006 2:25 pm

had ssd for many years

  • Quote

Post by dimko » Wed Feb 12, 2020 7:17 pm

55gigs, ssd, as root, for god knows how many years.

Still is alive, swapped it for NVME for root. Planning to use it as swap drive.(yes, seriously, cause I need extra sata slot)

No indication of failure on it.
Just a user.
Top
Post Reply

29 posts
  • 1
  • 2
  • Next

Return to “Kernel & Hardware”

Jump to
  • Assistance
  • ↳   News & Announcements
  • ↳   Frequently Asked Questions
  • ↳   Installing Gentoo
  • ↳   Multimedia
  • ↳   Desktop Environments
  • ↳   Networking & Security
  • ↳   Kernel & Hardware
  • ↳   Portage & Programming
  • ↳   Gamers & Players
  • ↳   Other Things Gentoo
  • ↳   Unsupported Software
  • Discussion & Documentation
  • ↳   Documentation, Tips & Tricks
  • ↳   Gentoo Chat
  • ↳   Gentoo Forums Feedback
  • ↳   Duplicate Threads
  • International Gentoo Users
  • ↳   中文 (Chinese)
  • ↳   Dutch
  • ↳   Finnish
  • ↳   French
  • ↳   Deutsches Forum (German)
  • ↳   Diskussionsforum
  • ↳   Deutsche Dokumentation
  • ↳   Greek
  • ↳   Forum italiano (Italian)
  • ↳   Forum di discussione italiano
  • ↳   Risorse italiane (documentazione e tools)
  • ↳   Polskie forum (Polish)
  • ↳   Instalacja i sprzęt
  • ↳   Polish OTW
  • ↳   Portuguese
  • ↳   Documentação, Ferramentas e Dicas
  • ↳   Russian
  • ↳   Scandinavian
  • ↳   Spanish
  • ↳   Other Languages
  • Architectures & Platforms
  • ↳   Gentoo on ARM
  • ↳   Gentoo on PPC
  • ↳   Gentoo on Sparc
  • ↳   Gentoo on Alternative Architectures
  • ↳   Gentoo on AMD64
  • ↳   Gentoo for Mac OS X (Portage for Mac OS X)
  • Board index
  • All times are UTC
  • Delete cookies

© 2001–2026 Gentoo Foundation, Inc.

Powered by phpBB® Forum Software © phpBB Limited

Privacy Policy

 

 

magic