xorg freeze on laptop. pls help

Message

yagaev · Post by **yagaev** » Sat Jun 30, 2018 5:33 am

X freezes on start without xorg.conf. Built with INPUT_DEVICES="synaptics libinput"

[     5.553] (II) LoadModule: "libinput"
[     5.553] (WW) Warning, couldn't open module libinput
[     5.553] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.553] (EE) No input driver matching `libinput'
[     5.553] (II) Falling back to input driver `libinput'
[     5.553] (II) LoadModule: "libinput"
[     5.553] (WW) Warning, couldn't open module libinput
[     5.553] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.554] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     5.554] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.554] (**) Video Bus: Applying InputClass "Keyboard0"
[     5.554] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.554] (II) LoadModule: "libinput"
[     5.554] (WW) Warning, couldn't open module libinput
[     5.554] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.554] (EE) No input driver matching `libinput'
[     5.554] (II) Falling back to input driver `libinput'
[     5.554] (II) LoadModule: "libinput"
[     5.554] (WW) Warning, couldn't open module libinput
[     5.554] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.554] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     5.554] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.554] (**) Power Button: Applying InputClass "Keyboard0"
[     5.554] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.554] (II) LoadModule: "libinput"
[     5.554] (WW) Warning, couldn't open module libinput
[     5.554] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.554] (EE) No input driver matching `libinput'
[     5.554] (II) Falling back to input driver `libinput'
[     5.554] (II) LoadModule: "libinput"
[     5.555] (WW) Warning, couldn't open module libinput
[     5.555] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.555] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     5.555] (II) No input driver specified, ignoring this device.
[     5.555] (II) This device may have been added with another device file.
[     5.555] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     5.555] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.555] (**) Sleep Button: Applying InputClass "Keyboard0"
[     5.555] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.555] (II) LoadModule: "libinput"
[     5.555] (WW) Warning, couldn't open module libinput
[     5.555] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.555] (EE) No input driver matching `libinput'
[     5.555] (II) Falling back to input driver `libinput'
[     5.555] (II) LoadModule: "libinput"
[     5.556] (WW) Warning, couldn't open module libinput
[     5.556] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.556] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     5.556] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.556] (**) Video Bus: Applying InputClass "Keyboard0"
[     5.556] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.556] (II) LoadModule: "libinput"
[     5.556] (WW) Warning, couldn't open module libinput
[     5.556] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.556] (EE) No input driver matching `libinput'
[     5.556] (II) Falling back to input driver `libinput'
[     5.556] (II) LoadModule: "libinput"
[     5.556] (WW) Warning, couldn't open module libinput
[     5.556] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.557] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[     5.557] (II) No input driver specified, ignoring this device.
[     5.557] (II) This device may have been added with another device file.
[     5.557] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[     5.557] (II) No input driver specified, ignoring this device.
[     5.557] (II) This device may have been added with another device file.
[     5.557] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[     5.557] (II) No input driver specified, ignoring this device.
[     5.557] (II) This device may have been added with another device file.
[     5.557] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[     5.557] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.557] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard0"
[     5.557] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.557] (II) LoadModule: "libinput"
[     5.558] (WW) Warning, couldn't open module libinput
[     5.558] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.558] (EE) No input driver matching `libinput'
[     5.558] (II) Falling back to input driver `libinput'
[     5.558] (II) LoadModule: "libinput"
[     5.558] (WW) Warning, couldn't open module libinput
[     5.558] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.558] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[     5.558] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[     5.558] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     5.558] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     5.558] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[     5.558] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     5.558] (II) LoadModule: "synaptics"
[     5.558] (WW) Warning, couldn't open module synaptics
[     5.558] (EE) Failed to load module "synaptics" (module does not exist, 0)
[     5.558] (EE) No input driver matching `synaptics'
[     5.558] (II) Falling back to input driver `libinput'
[     5.558] (II) LoadModule: "libinput"
[     5.558] (WW) Warning, couldn't open module libinput
[     5.558] (EE) Failed to load module "libinput" (module does not exist, 0)
[     5.558] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[     5.559] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     6.016] (II) modeset(0): EDID vendor "LGD", prod id 732
[     6.016] (II) modeset(0): Printing DDC gathered Modelines:
[     6.016] (II) modeset(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[   103.797] (II) Server terminated successfully (0). Closing log file.

Code: Select all

[I] dev-libs/libinput
     Available versions:  1.10.6(0/10)^t 1.10.7(0/10)^t (~)1.11.0(0/10)^t (~)1.11.1(0/10)^t {doc test INPUT_DEVICES="wacom"}
     Installed versions:  1.11.1(0/10)^t(12:00:41 AM 06/28/2018)(-doc -test INPUT_DEVICES="-wacom")
     Homepage:            https://www.freedesktop.org/wiki/Software/libinput/
     Description:         Library to handle input devices in Wayland

[I] x11-drivers/xf86-input-libinput
     Available versions:  0.27.1
     Installed versions:  0.27.1(11:28:58 PM 06/29/2018)
     Homepage:            https://www.x.org/wiki/ https://cgit.freedesktop.org/
     Description:         X.org input driver based on libinput

* x11-misc/libinput-gestures
     Available versions:  (~)2.31 (~)2.34 (~)2.36 **9999 {test PYTHON_SINGLE_TARGET="python3_4 python3_5 python3_6" PYTHON_TARGETS="python3_4 python3_5 python3_6"}
     Homepage:            https://github.com/bulletmark/libinput-gestures
     Description:         Actions gestures on your touchpad using libinput

Found 3 matches
[I] x11-drivers/xf86-input-synaptics
     Available versions:  1.9.0 1.9.1 {KERNEL="linux"}
     Installed versions:  1.9.1(12:51:59 AM 06/29/2018)(KERNEL="linux")
     Homepage:            https://cgit.freedesktop.org/xorg/driver/xf86-input-synaptics/
     Description:         Driver for Synaptics touchpads

Code: Select all

lspci
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
	Subsystem: Acer Incorporated [ALI] 2nd Generation Core Processor Family Integrated Graphics Controller
	Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 620M/630M/635M/640M LE] (rev a1)
	Subsystem: Acer Incorporated [ALI] GF108M [GeForce GT 620M/630M/635M/640M LE]
	Kernel driver in use: nvidia
	Kernel modules: nvidia_drm, nvidia

----------------
kernel config
emerge --info

yagaev · Post by **yagaev** » Tue Jul 03, 2018 7:01 pm

Change to evdev, rebuilt xorg-drivers and input drivers. Resolved.

Post by **NeddySeagoon** » Tue Jul 03, 2018 7:17 pm

yagaev,

Code: Select all

[     5.553] (II) LoadModule: "libinput"
[     5.553] (WW) Warning, couldn't open module libinput

You were trying to use libinput but its not installed.

yagaev · Post by **yagaev** » Tue Jul 03, 2018 7:22 pm

NeddySeagoon wrote:yagaev,
Code: Select all
[     5.553] (II) LoadModule: "libinput"
[     5.553] (WW) Warning, couldn't open module libinput 
You were trying to use libinput but its not installed.

Code: Select all

[I] x11-drivers/xf86-input-libinput
     Available versions:  0.27.1
     Installed versions:  0.27.1(11:28:58 PM 06/29/2018)