I love your gentoo pi3 64 img,but I use waveshare monitor(4 Inch HDMI LCD),what can I do for LCD driver?I need only display,not need touch support.
Thanks a lot.
Bootable 64-bit RPi3 Gentoo image (OpenRC/Xfce/VC4) UPDATED
Message
Assuming you are driving this display via an HDMI cable, then you just need to set the resolution in /boot/config.txt (the file config.txt in the image's first partition, which you can edit on any PC).leg wrote:I love your gentoo pi3 64 img,but I use waveshare monitor(4 Inch HDMI LCD),what can I do for LCD driver?I need only display,not need touch support.
I think the 4" waveshare is a 480x800 display, so just add the following lines to config.txt (mostly taken from the waveshare wiki):
Code: Select all
hdmi_drive=1
hdmi_ignore_edid=0xa5000080
hdmi_group=2
hdmi_mode=87
hdmi_cvt 480 800 60 6 0 0 0
display_rotate=3If you have trouble, also comment out the "dtoverlay=vc4-fkms-v3d,cma-256" line, to use the default framebuffer.
Regards,
sakaki
sakaki
Hi,
When I tried to follow Raspberry Pi 3 64 bit install doc,
my crossdev showing this in my PC
What should I do next?
When I tried to follow Raspberry Pi 3 64 bit install doc,
my crossdev showing this in my PC
What should I do next?
Code: Select all
localhost ~ # crossdev -t arm64
* You need to specify an output overlay. Please use --ov-output, or consult
* https://wiki.gentoo.org/wiki/Overlay/Local_overlay for more details.
localhost ~ # crossdev -t arm64 --ov-output /usr/local/arm64
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* crossdev version: 20151026
* Host Portage ARCH: amd64
* Target Portage ARCH: arm64
* Target System: aarch64-unknown-linux-gnu
* Stage: 4 (C/C++ compiler)
* ABIs: arm64
* binutils: binutils-[latest]
* gcc: gcc-[latest]
* headers: linux-headers-[latest]
* libc: glibc-[latest]
* CROSSDEV_OVERLAY: /usr/local/arm64
* PORT_LOGDIR: /var/log/portage
* PORTAGE_CONFIGROOT:
* Portage flags:
_ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ -
* leaving sys-devel/binutils in /usr/local/arm64
* leaving sys-devel/gcc in /usr/local/arm64
* leaving sys-kernel/linux-headers in /usr/local/arm64
* leaving sys-libs/glibc in /usr/local/arm64
* leaving sys-devel/gdb in /usr/local/arm64
_ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ -
* Log: /var/log/portage/cross-aarch64-unknown-linux-gnu-binutils.log
* Emerging cross-binutils ...
* binutils failed :(
*
* If you file a bug, please attach the following logfiles:
* /var/log/portage/cross-aarch64-unknown-linux-gnu-info.log
* /var/log/portage/cross-aarch64-unknown-linux-gnu-binutils.log.xz
* /var/tmp/portage/cross-aarch64-unknown-linux-gnu/binutils*/temp/binutils-config.logs.tar.xz
localhost ~ # cat /var/log/portage/cross-aarch64-unknown-linux-gnu-info.log
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* crossdev version: 20151026
* Host Portage ARCH: amd64
* Target Portage ARCH: arm64
* Target System: aarch64-unknown-linux-gnu
* Stage: 4 (C/C++ compiler)
* ABIs: arm64
* binutils: binutils-[latest]
* gcc: gcc-[latest]
* headers: linux-headers-[latest]
* libc: glibc-[latest]
* CROSSDEV_OVERLAY: /usr/local/arm64
* PORT_LOGDIR: /var/log/portage
* PORTAGE_CONFIGROOT:
* Portage flags:
_ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ -
Portage 2.3.5 (python 3.4.5-final-0, default/linux/amd64/13.0/no-multilib, gcc-5.4.0, glibc-2.23-r3, 4.9.16-gentoo x86_64)
=================================================================
System uname: Linux-4.9.16-gentoo-x86_64-Intel_Xeon_E312xx_-Sandy_Bridge-with-gentoo-2.3
KiB Mem: 2047812 total, 30756 free
KiB Swap: 2097148 total, 2096056 free
Timestamp of repository gentoo: Mon, 22 May 2017 04:00:01 +0000
sh bash 4.3_p48-r1
ld GNU ld (Gentoo 2.25.1 p1.1) 2.25.1
app-shells/bash: 4.3_p48-r1::gentoo
dev-lang/perl: 5.24.1-r1::gentoo
dev-lang/python: 2.7.12::gentoo, 3.4.5::gentoo
dev-util/cmake: 3.7.2::gentoo
dev-util/pkgconfig: 0.28-r2::gentoo
sys-apps/baselayout: 2.3::gentoo
sys-apps/openrc: 0.26.2::gentoo
sys-apps/sandbox: 2.10-r3::gentoo
sys-devel/autoconf: 2.69::gentoo
sys-devel/automake: 1.14.1::gentoo, 1.15-r2::gentoo
sys-devel/binutils: 2.25.1-r1::gentoo, 2.26.1::gentoo
sys-devel/gcc: 4.9.3::gentoo, 4.9.4::gentoo, 5.4.0-r3::gentoo
sys-devel/gcc-config: 1.7.3::gentoo
sys-devel/libtool: 2.4.6-r3::gentoo
sys-devel/make: 4.2.1::gentoo
sys-kernel/linux-headers: 4.4::gentoo (virtual/os-headers)
sys-libs/glibc: 2.23-r3::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
ABI="amd64"
ABI_X86="64"
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
ACCEPT_PROPERTIES="*"
ACCEPT_RESTRICT="*"
ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci"
APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias"
ARCH="amd64"
AUTOCLEAN="yes"
BOOTSTRAP_USE="cxx unicode internal-glib python_targets_python3_4 python_targets_python2_7 multilib"
CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -mtune=native -fomit-frame-pointer -O3 -pipe"
CFLAGS_amd64="-m64"
CFLAGS_x32="-mx32"
CFLAGS_x86="-m32"
CHOST="x86_64-pc-linux-gnu"
CHOST_amd64="x86_64-pc-linux-gnu"
CHOST_x32="x86_64-pc-linux-gnux32"
CHOST_x86="i686-pc-linux-gnu"
CLEAN_DELAY="5"
COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog"
COLLISION_IGNORE="/lib/modules/* *.py[co] *$py.class */dropin.cache"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CONSOLETYPE="pty"
CPU_FLAGS_X86="aes avx mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3"
CXXFLAGS="-march=native -mtune=native -fomit-frame-pointer -O3 -pipe"
DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-KwJ4xxrmip,guid=9b52ca0d5e1afe7399bd539159228565"
DEFAULT_ABI="amd64"
DESKTOP_SESSION="xfce"
DISPLAY=":0.0"
DISTDIR="/usr/portage/distfiles"
EDITOR="/bin/nano"
ELIBC="glibc"
EMERGE_WARNING_DELAY="10"
EPREFIX=""
EROOT="/"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FETCHCOMMAND="wget -t 3 -T 60 --passive-ftp -O "${DISTDIR}/${FILE}" "${URI}""
FETCHCOMMAND_RSYNC="rsync -avP "${URI}" "${DISTDIR}/${FILE}""
FETCHCOMMAND_SFTP="bash -c "x=\${2#sftp://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port= ; eval \"declare -a ssh_opts=(\${3})\" ; exec sftp \${port:+-P \${port}} \"\${ssh_opts[@]}\" \"\${host}:/\${x#*/}\" \"\$1\"" sftp "${DISTDIR}/${FILE}" "${URI}" "${PORTAGE_SSH_OPTS}""
FETCHCOMMAND_SSH="bash -c "x=\${2#ssh://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port= ; exec rsync --rsh=\"ssh \${port:+-p\${port}} \${3}\" -avP \"\${host}:/\${x#*/}\" \"\$1\"" rsync "${DISTDIR}/${FILE}" "${URI}" "${PORTAGE_SSH_OPTS}""
FFLAGS="-O2 -pipe"
GCC_SPECS=""
GENTOO_MIRRORS="http://gentoo.aditsu.net:8000"
GLADE_CATALOG_PATH=":"
GLADE_MODULE_PATH=":"
GLADE_PIXMAP_PATH=":"
GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx"
GRUB_PLATFORMS=""
GSETTINGS_BACKEND="gconf"
GUILE_LOAD_PATH="/usr/share/guile/1.8"
HOME="/root"
HUSHLOGIN="FALSE"
INFOPATH="/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/info"
INPUT_DEVICES="libinput keyboard mouse"
IUSE_IMPLICIT="abi_x86_64 prefix prefix-chain prefix-guest"
KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
LC_MESSAGES="C"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LDFLAGS_amd64="-m elf_x86_64"
LDFLAGS_x32="-m elf32_x86_64"
LDFLAGS_x86="-m elf_i386"
LESS="-R -M --shift 5"
LESSOPEN="|lesspipe %s"
LIBDIR_amd64="lib64"
LIBDIR_x32="libx32"
LIBDIR_x86="lib32"
LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer"
LOGNAME="root"
LS_COLORS="rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.cfg=00;32:*.conf=00;32:*.diff=00;32:*.doc=00;32:*.ini=00;32:*.log=00;32:*.patch=00;32:*.pdf=00;32:*.ps=00;32:*.tex=00;32:*.txt=00;32:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:"
MAIL="/var/mail/root"
MANPAGER="manpager"
MANPATH="/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/man"
MULTILIB_ABIS="amd64"
MULTILIB_STRICT_DENY="64-bit.*shared object"
MULTILIB_STRICT_DIRS="/lib32 /lib /usr/lib32 /usr/lib /usr/kde/*/lib32 /usr/kde/*/lib /usr/qt/*/lib32 /usr/qt/*/lib /usr/X11R6/lib32 /usr/X11R6/lib"
MULTILIB_STRICT_EXEMPT="(perl5|gcc|gcc-lib|binutils|eclipse-3|debug|portage|udev|systemd|clang|python-exec|llvm)"
MULTIOSDIRS="../lib64"
NETBEANS="apisupport cnd groovy gsf harness ide identity j2ee java mobility nb php profiler soa visualweb webcommon websvccommon xml"
NOCOLOR="true"
OFFICE_IMPLEMENTATION="libreoffice"
OLDPWD="/root"
OPENGL_PROFILE="xorg-x11"
PAGER="/usr/bin/less"
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0"
PHP_TARGETS="php5-6"
PKGDIR="/usr/portage/packages"
PORTAGE_ARCHLIST="alpha amd64 amd64-fbsd amd64-linux arm arm-linux arm64 arm64-linux hppa ia64 m68k m68k-mint mips nios2 ppc ppc-aix ppc-macos ppc64 ppc64-linux riscv s390 sh sparc sparc-fbsd sparc-solaris sparc64-solaris x64-cygwin x64-macos x64-solaris x86 x86-cygwin x86-fbsd x86-linux x86-macos x86-solaris x86-winnt"
PORTAGE_BIN_PATH="/usr/lib/portage/python3.4"
PORTAGE_COMPRESS_EXCLUDE_SUFFIXES="css gif htm[l]? jp[e]?g js pdf png"
PORTAGE_CONFIGROOT="/"
PORTAGE_DEBUG="0"
PORTAGE_DEPCACHEDIR="/var/cache/edb/dep"
PORTAGE_ELOG_CLASSES="log warn error"
PORTAGE_ELOG_MAILFROM="portage@localhost"
PORTAGE_ELOG_MAILSUBJECT="[portage] ebuild log for ${PACKAGE} on ${HOST}"
PORTAGE_ELOG_MAILURI="root"
PORTAGE_ELOG_SYSTEM="save_summary:log,warn,error,qa echo"
PORTAGE_FETCH_CHECKSUM_TRY_MIRRORS="5"
PORTAGE_FETCH_RESUME_MIN_SIZE="350K"
PORTAGE_GID="250"
PORTAGE_GPG_SIGNING_COMMAND="gpg --sign --digest-algo SHA256 --clearsign --yes --default-key "${PORTAGE_GPG_KEY}" --homedir "${PORTAGE_GPG_DIR}" "${FILE}""
PORTAGE_INST_GID="0"
PORTAGE_INST_UID="0"
PORTAGE_INTERNAL_CALLER="1"
PORTAGE_OVERRIDE_EPREFIX=""
PORTAGE_PYM_PATH="/usr/lib64/python3.4/site-packages"
PORTAGE_PYTHONPATH="/usr/lib64/python3.4/site-packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_RSYNC_RETRIES="-1"
PORTAGE_SYNC_STALE="30"
PORTAGE_TMPDIR="/var/tmp"
PORTAGE_VERBOSE="1"
PORTAGE_WORKDIR_MODE="0700"
PORTAGE_XATTR_EXCLUDE="btrfs.* security.evm security.ima security.selinux system.nfs4_acl"
PORT_LOGDIR_CLEAN="find "${PORT_LOGDIR}" -type f ! -name "summary.log*" -mtime +7 -delete"
PROFILE_ONLY_VARIABLES="ARCH ELIBC IUSE_IMPLICIT KERNEL USERLAND USE_EXPAND_IMPLICIT USE_EXPAND_UNPREFIXED USE_EXPAND_VALUES_ARCH USE_EXPAND_VALUES_ELIBC USE_EXPAND_VALUES_KERNEL USE_EXPAND_VALUES_USERLAND"
PWD="/"
PYTHONDONTWRITEBYTECODE="1"
PYTHON_SINGLE_TARGET="python3_4"
PYTHON_TARGETS="python2_7 python3_4"
RESUMECOMMAND="wget -c -t 3 -T 60 --passive-ftp -O "${DISTDIR}/${FILE}" "${URI}""
RESUMECOMMAND_RSYNC="rsync -avP "${URI}" "${DISTDIR}/${FILE}""
RESUMECOMMAND_SSH="bash -c "x=\${2#ssh://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port= ; exec rsync --rsh=\"ssh \${port:+-p\${port}} \${3}\" -avP \"\${host}:/\${x#*/}\" \"\$1\"" rsync "${DISTDIR}/${FILE}" "${URI}" "${PORTAGE_SSH_OPTS}""
ROOT="/"
ROOTPATH="/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0"
RPMDIR="/usr/portage/rpm"
RUBY_TARGETS="ruby21 ruby22"
SESSION_MANAGER="local/localhost:@/tmp/.ICE-unix/22539,unix/localhost:/tmp/.ICE-unix/22539"
SHELL="/bin/bash"
SHLVL="4"
SSH_AGENT_PID="22548"
SSH_AUTH_SOCK="/tmp/ssh-l0i3e2371gOM/agent.22547"
SYMLINK_LIB="yes"
TERM="xterm"
UNINSTALL_IGNORE="/lib/modules/* /var/run /var/lock"
USE="acl amd64 berkdb bzip2 cli cracklib crypt cxx dri fortran gdbm iconv ipv6 modules ncurses nls nptl openmp pam pcre readline seccomp session ssl tcpd unicode xattr zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTHON_SINGLE_TARGET="python3_4" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby21 ruby22" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
USER="root"
USERLAND="GNU"
USE_EXPAND="ABI_MIPS ABI_PPC ABI_S390 ABI_X86 ALSA_CARDS APACHE2_MODULES APACHE2_MPMS CALLIGRA_EXPERIMENTAL_FEATURES CALLIGRA_FEATURES CAMERAS COLLECTD_PLUGINS CPU_FLAGS_ARM CPU_FLAGS_X86 CROSSCOMPILE_OPTS CURL_SSL ELIBC ENLIGHTENMENT_MODULES FFTOOLS GPSD_PROTOCOLS GRUB_PLATFORMS INPUT_DEVICES KERNEL L10N LCD_DEVICES LIBREOFFICE_EXTENSIONS LINGUAS LIRC_DEVICES LLVM_TARGETS MONKEYD_PLUGINS NETBEANS_MODULES NGINX_MODULES_HTTP NGINX_MODULES_MAIL NGINX_MODULES_STREAM OFED_DRIVERS OFFICE_IMPLEMENTATION OPENMPI_FABRICS OPENMPI_OFED_FEATURES OPENMPI_RM PHP_TARGETS PYTHON_SINGLE_TARGET PYTHON_TARGETS QEMU_SOFTMMU_TARGETS QEMU_USER_TARGETS ROS_MESSAGES RUBY_TARGETS SANE_BACKENDS USERLAND UWSGI_PLUGINS VIDEO_CARDS VOICEMAIL_STORAGE XFCE_PLUGINS XTABLES_ADDONS"
USE_EXPAND_HIDDEN="ABI_MIPS ABI_PPC ABI_S390 ABI_X86 CPU_FLAGS_ARM CROSSCOMPILE_OPTS ELIBC KERNEL USERLAND"
USE_EXPAND_IMPLICIT="ARCH ELIBC KERNEL USERLAND"
USE_EXPAND_UNPREFIXED="ARCH"
USE_EXPAND_VALUES_ARCH="alpha amd64 amd64-fbsd amd64-linux arm arm-linux arm64 hppa ia64 m68k m68k-mint mips nios2 ppc ppc64 ppc64-linux ppc-aix ppc-macos riscv s390 sh sparc sparc64-solaris sparc-fbsd sparc-solaris x64-cygwin x64-macos x64-solaris x86 x86-cygwin x86-fbsd x86-linux x86-macos x86-solaris x86-winnt"
USE_EXPAND_VALUES_ELIBC="AIX bionic Cygwin Darwin DragonFly FreeBSD glibc HPUX Interix mingw mintlib musl NetBSD OpenBSD SunOS uclibc Winnt"
USE_EXPAND_VALUES_KERNEL="AIX Darwin FreeBSD freemint HPUX linux NetBSD OpenBSD SunOS Winnt"
USE_EXPAND_VALUES_USERLAND="BSD GNU"
USE_ORDER="env:pkg:conf:defaults:pkginternal:repo:env.d"
VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l"
WINDOWID="39845901"
WINDOWPATH="7"
XDG_CONFIG_DIRS="/etc/xdg"
XDG_CURRENT_DESKTOP="XFCE"
XDG_DATA_DIRS="/usr/local/share:/usr/share"
XDG_MENU_PREFIX="xfce-"
XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
XTERM_LOCALE="C"
XTERM_SHELL="/bin/bash"
XTERM_VERSION="XTerm(327)"
hackers - make sth real
academics - read sth said to be real
academics - read sth said to be real
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
honeymak,
isn't quite right.
It needs to be
That should build a gcc-6.3 cross toolchain.
Code: Select all
crossdev -t arm64 It needs to be
Code: Select all
crossdev -t aarch64-unknown-linux-gnuRegards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
* Log: /var/log/portage/cross-aarch64-unknown-linux-gnu-binutils.log
* Emerging cross-binutils ...
* binutils failed
*
* If you file a bug, please attach the following logfiles:
* /var/log/portage/cross-aarch64-unknown-linux-gnu-info.log
* /var/log/portage/cross-aarch64-unknown-linux-gnu-binutils.log.xz
* /var/tmp/portage/cross-aarch64-unknown-linux-gnu/binutils*/temp/binutils-config.logs.tar.xz
* Emerging cross-binutils ...
* binutils failed
*
* If you file a bug, please attach the following logfiles:
* /var/log/portage/cross-aarch64-unknown-linux-gnu-info.log
* /var/log/portage/cross-aarch64-unknown-linux-gnu-binutils.log.xz
* /var/tmp/portage/cross-aarch64-unknown-linux-gnu/binutils*/temp/binutils-config.logs.tar.xz
hackers - make sth real
academics - read sth said to be real
academics - read sth said to be real
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
honeymak.
and tell us the link.
You may need tobefore you can do that.
Code: Select all
wgetpaste /var/log/portage/cross-aarch64-unknown-linux-gnu-binutils.log You may need to
Code: Select all
emerge wgetpasteRegards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
As far as I can see, all your posts in this thread are within the last couple of days. None of those posts seem to provide the information that NeddySeagoon requested. The only log I see is the summary log that tells you what logs you should give us. If I missed it, please provide a [post] link back to the post in which you provided the required information.honeymak wrote:i did paste the log here already
Code: Select all
localhost ~ # cat /var/log/portage/cross-aarch64-unknown-linux-gnu-info.log
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* crossdev version: 20151026
* Host Portage ARCH: amd64
* Target Portage ARCH: arm64
* Target System: aarch64-unknown-linux-gnu
* Stage: 4 (C/C++ compiler)
* ABIs: arm64
* binutils: binutils-[latest]
* gcc: gcc-[latest]
* headers: linux-headers-[latest]
* libc: glibc-[latest]
* CROSSDEV_OVERLAY: /usr/local/arm64
* PORT_LOGDIR: /var/log/portage
* PORTAGE_CONFIGROOT:
* Portage flags:
_ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ - _ - ~ -
Portage 2.3.5 (python 3.4.5-final-0, default/linux/amd64/13.0/no-multilib, gcc-5.4.0, glibc-2.23-r3, 4.9.16-gentoo x86_64)
=================================================================
System uname: Linux-4.9.16-gentoo-x86_64-Intel_Xeon_E312xx_-Sandy_Bridge-with-gentoo-2.3
KiB Mem: 2047812 total, 30756 free
KiB Swap: 2097148 total, 2096056 free
Timestamp of repository gentoo: Mon, 22 May 2017 04:00:01 +0000
sh bash 4.3_p48-r1
ld GNU ld (Gentoo 2.25.1 p1.1) 2.25.1
app-shells/bash: 4.3_p48-r1::gentoo
dev-lang/perl: 5.24.1-r1::gentoo
dev-lang/python: 2.7.12::gentoo, 3.4.5::gentoo
dev-util/cmake: 3.7.2::gentoo
dev-util/pkgconfig: 0.28-r2::gentoo
sys-apps/baselayout: 2.3::gentoo
sys-apps/openrc: 0.26.2::gentoo
sys-apps/sandbox: 2.10-r3::gentoo
sys-devel/autoconf: 2.69::gentoo
sys-devel/automake: 1.14.1::gentoo, 1.15-r2::gentoo
sys-devel/binutils: 2.25.1-r1::gentoo, 2.26.1::gentoo
sys-devel/gcc: 4.9.3::gentoo, 4.9.4::gentoo, 5.4.0-r3::gentoo
sys-devel/gcc-config: 1.7.3::gentoo
sys-devel/libtool: 2.4.6-r3::gentoo
sys-devel/make: 4.2.1::gentoo
sys-kernel/linux-headers: 4.4::gentoo (virtual/os-headers)
sys-libs/glibc: 2.23-r3::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
ABI="amd64"
ABI_X86="64"
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
ACCEPT_PROPERTIES="*"
ACCEPT_RESTRICT="*"
ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci"
APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias"
ARCH="amd64"
AUTOCLEAN="yes"
BOOTSTRAP_USE="cxx unicode internal-glib python_targets_python3_4 python_targets_python2_7 multilib"
CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -mtune=native -fomit-frame-pointer -O3 -pipe"
CFLAGS_amd64="-m64"
CFLAGS_x32="-mx32"
CFLAGS_x86="-m32"
CHOST="x86_64-pc-linux-gnu"
CHOST_amd64="x86_64-pc-linux-gnu"
CHOST_x32="x86_64-pc-linux-gnux32"
CHOST_x86="i686-pc-linux-gnu"
CLEAN_DELAY="5"
COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog"
COLLISION_IGNORE="/lib/modules/* *.py[co] *$py.class */dropin.cache"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CONSOLETYPE="pty"
CPU_FLAGS_X86="aes avx mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3"
CXXFLAGS="-march=native -mtune=native -fomit-frame-pointer -O3 -pipe"
DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-KwJ4xxrmip,guid=9b52ca0d5e1afe7399bd539159228565"
DEFAULT_ABI="amd64"
DESKTOP_SESSION="xfce"
DISPLAY=":0.0"
DISTDIR="/usr/portage/distfiles"
EDITOR="/bin/nano"
ELIBC="glibc"
EMERGE_WARNING_DELAY="10"
EPREFIX=""
EROOT="/"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FETCHCOMMAND="wget -t 3 -T 60 --passive-ftp -O "${DISTDIR}/${FILE}" "${URI}""
FETCHCOMMAND_RSYNC="rsync -avP "${URI}" "${DISTDIR}/${FILE}""
FETCHCOMMAND_SFTP="bash -c "x=\${2#sftp://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port= ; eval \"declare -a ssh_opts=(\${3})\" ; exec sftp \${port:+-P \${port}} \"\${ssh_opts[@]}\" \"\${host}:/\${x#*/}\" \"\$1\"" sftp "${DISTDIR}/${FILE}" "${URI}" "${PORTAGE_SSH_OPTS}""
FETCHCOMMAND_SSH="bash -c "x=\${2#ssh://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port= ; exec rsync --rsh=\"ssh \${port:+-p\${port}} \${3}\" -avP \"\${host}:/\${x#*/}\" \"\$1\"" rsync "${DISTDIR}/${FILE}" "${URI}" "${PORTAGE_SSH_OPTS}""
FFLAGS="-O2 -pipe"
GCC_SPECS=""
GENTOO_MIRRORS="http://gentoo.aditsu.net:8000"
GLADE_CATALOG_PATH=":"
GLADE_MODULE_PATH=":"
GLADE_PIXMAP_PATH=":"
GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx"
GRUB_PLATFORMS=""
GSETTINGS_BACKEND="gconf"
GUILE_LOAD_PATH="/usr/share/guile/1.8"
HOME="/root"
HUSHLOGIN="FALSE"
INFOPATH="/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/info"
INPUT_DEVICES="libinput keyboard mouse"
IUSE_IMPLICIT="abi_x86_64 prefix prefix-chain prefix-guest"
KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
LC_MESSAGES="C"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LDFLAGS_amd64="-m elf_x86_64"
LDFLAGS_x32="-m elf32_x86_64"
LDFLAGS_x86="-m elf_i386"
LESS="-R -M --shift 5"
LESSOPEN="|lesspipe %s"
LIBDIR_amd64="lib64"
LIBDIR_x32="libx32"
LIBDIR_x86="lib32"
LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer"
LOGNAME="root"
LS_COLORS="rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.cfg=00;32:*.conf=00;32:*.diff=00;32:*.doc=00;32:*.ini=00;32:*.log=00;32:*.patch=00;32:*.pdf=00;32:*.ps=00;32:*.tex=00;32:*.txt=00;32:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:"
MAIL="/var/mail/root"
MANPAGER="manpager"
MANPATH="/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/man"
MULTILIB_ABIS="amd64"
MULTILIB_STRICT_DENY="64-bit.*shared object"
MULTILIB_STRICT_DIRS="/lib32 /lib /usr/lib32 /usr/lib /usr/kde/*/lib32 /usr/kde/*/lib /usr/qt/*/lib32 /usr/qt/*/lib /usr/X11R6/lib32 /usr/X11R6/lib"
MULTILIB_STRICT_EXEMPT="(perl5|gcc|gcc-lib|binutils|eclipse-3|debug|portage|udev|systemd|clang|python-exec|llvm)"
MULTIOSDIRS="../lib64"
NETBEANS="apisupport cnd groovy gsf harness ide identity j2ee java mobility nb php profiler soa visualweb webcommon websvccommon xml"
NOCOLOR="true"
OFFICE_IMPLEMENTATION="libreoffice"
OLDPWD="/root"
OPENGL_PROFILE="xorg-x11"
PAGER="/usr/bin/less"
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0"
PHP_TARGETS="php5-6"
PKGDIR="/usr/portage/packages"
PORTAGE_ARCHLIST="alpha amd64 amd64-fbsd amd64-linux arm arm-linux arm64 arm64-linux hppa ia64 m68k m68k-mint mips nios2 ppc ppc-aix ppc-macos ppc64 ppc64-linux riscv s390 sh sparc sparc-fbsd sparc-solaris sparc64-solaris x64-cygwin x64-macos x64-solaris x86 x86-cygwin x86-fbsd x86-linux x86-macos x86-solaris x86-winnt"
PORTAGE_BIN_PATH="/usr/lib/portage/python3.4"
PORTAGE_COMPRESS_EXCLUDE_SUFFIXES="css gif htm[l]? jp[e]?g js pdf png"
PORTAGE_CONFIGROOT="/"
PORTAGE_DEBUG="0"
PORTAGE_DEPCACHEDIR="/var/cache/edb/dep"
PORTAGE_ELOG_CLASSES="log warn error"
PORTAGE_ELOG_MAILFROM="portage@localhost"
PORTAGE_ELOG_MAILSUBJECT="[portage] ebuild log for ${PACKAGE} on ${HOST}"
PORTAGE_ELOG_MAILURI="root"
PORTAGE_ELOG_SYSTEM="save_summary:log,warn,error,qa echo"
PORTAGE_FETCH_CHECKSUM_TRY_MIRRORS="5"
PORTAGE_FETCH_RESUME_MIN_SIZE="350K"
PORTAGE_GID="250"
PORTAGE_GPG_SIGNING_COMMAND="gpg --sign --digest-algo SHA256 --clearsign --yes --default-key "${PORTAGE_GPG_KEY}" --homedir "${PORTAGE_GPG_DIR}" "${FILE}""
PORTAGE_INST_GID="0"
PORTAGE_INST_UID="0"
PORTAGE_INTERNAL_CALLER="1"
PORTAGE_OVERRIDE_EPREFIX=""
PORTAGE_PYM_PATH="/usr/lib64/python3.4/site-packages"
PORTAGE_PYTHONPATH="/usr/lib64/python3.4/site-packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_RSYNC_RETRIES="-1"
PORTAGE_SYNC_STALE="30"
PORTAGE_TMPDIR="/var/tmp"
PORTAGE_VERBOSE="1"
PORTAGE_WORKDIR_MODE="0700"
PORTAGE_XATTR_EXCLUDE="btrfs.* security.evm security.ima security.selinux system.nfs4_acl"
PORT_LOGDIR_CLEAN="find "${PORT_LOGDIR}" -type f ! -name "summary.log*" -mtime +7 -delete"
PROFILE_ONLY_VARIABLES="ARCH ELIBC IUSE_IMPLICIT KERNEL USERLAND USE_EXPAND_IMPLICIT USE_EXPAND_UNPREFIXED USE_EXPAND_VALUES_ARCH USE_EXPAND_VALUES_ELIBC USE_EXPAND_VALUES_KERNEL USE_EXPAND_VALUES_USERLAND"
PWD="/"
PYTHONDONTWRITEBYTECODE="1"
PYTHON_SINGLE_TARGET="python3_4"
PYTHON_TARGETS="python2_7 python3_4"
RESUMECOMMAND="wget -c -t 3 -T 60 --passive-ftp -O "${DISTDIR}/${FILE}" "${URI}""
RESUMECOMMAND_RSYNC="rsync -avP "${URI}" "${DISTDIR}/${FILE}""
RESUMECOMMAND_SSH="bash -c "x=\${2#ssh://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port= ; exec rsync --rsh=\"ssh \${port:+-p\${port}} \${3}\" -avP \"\${host}:/\${x#*/}\" \"\$1\"" rsync "${DISTDIR}/${FILE}" "${URI}" "${PORTAGE_SSH_OPTS}""
ROOT="/"
ROOTPATH="/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0"
RPMDIR="/usr/portage/rpm"
RUBY_TARGETS="ruby21 ruby22"
SESSION_MANAGER="local/localhost:@/tmp/.ICE-unix/22539,unix/localhost:/tmp/.ICE-unix/22539"
SHELL="/bin/bash"
SHLVL="4"
SSH_AGENT_PID="22548"
SSH_AUTH_SOCK="/tmp/ssh-l0i3e2371gOM/agent.22547"
SYMLINK_LIB="yes"
TERM="xterm"
UNINSTALL_IGNORE="/lib/modules/* /var/run /var/lock"
USE="acl amd64 berkdb bzip2 cli cracklib crypt cxx dri fortran gdbm iconv ipv6 modules ncurses nls nptl openmp pam pcre readline seccomp session ssl tcpd unicode xattr zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTHON_SINGLE_TARGET="python3_4" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby21 ruby22" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
USER="root"
USERLAND="GNU"
USE_EXPAND="ABI_MIPS ABI_PPC ABI_S390 ABI_X86 ALSA_CARDS APACHE2_MODULES APACHE2_MPMS CALLIGRA_EXPERIMENTAL_FEATURES CALLIGRA_FEATURES CAMERAS COLLECTD_PLUGINS CPU_FLAGS_ARM CPU_FLAGS_X86 CROSSCOMPILE_OPTS CURL_SSL ELIBC ENLIGHTENMENT_MODULES FFTOOLS GPSD_PROTOCOLS GRUB_PLATFORMS INPUT_DEVICES KERNEL L10N LCD_DEVICES LIBREOFFICE_EXTENSIONS LINGUAS LIRC_DEVICES LLVM_TARGETS MONKEYD_PLUGINS NETBEANS_MODULES NGINX_MODULES_HTTP NGINX_MODULES_MAIL NGINX_MODULES_STREAM OFED_DRIVERS OFFICE_IMPLEMENTATION OPENMPI_FABRICS OPENMPI_OFED_FEATURES OPENMPI_RM PHP_TARGETS PYTHON_SINGLE_TARGET PYTHON_TARGETS QEMU_SOFTMMU_TARGETS QEMU_USER_TARGETS ROS_MESSAGES RUBY_TARGETS SANE_BACKENDS USERLAND UWSGI_PLUGINS VIDEO_CARDS VOICEMAIL_STORAGE XFCE_PLUGINS XTABLES_ADDONS"
USE_EXPAND_HIDDEN="ABI_MIPS ABI_PPC ABI_S390 ABI_X86 CPU_FLAGS_ARM CROSSCOMPILE_OPTS ELIBC KERNEL USERLAND"
USE_EXPAND_IMPLICIT="ARCH ELIBC KERNEL USERLAND"
USE_EXPAND_UNPREFIXED="ARCH"
USE_EXPAND_VALUES_ARCH="alpha amd64 amd64-fbsd amd64-linux arm arm-linux arm64 hppa ia64 m68k m68k-mint mips nios2 ppc ppc64 ppc64-linux ppc-aix ppc-macos riscv s390 sh sparc sparc64-solaris sparc-fbsd sparc-solaris x64-cygwin x64-macos x64-solaris x86 x86-cygwin x86-fbsd x86-linux x86-macos x86-solaris x86-winnt"
USE_EXPAND_VALUES_ELIBC="AIX bionic Cygwin Darwin DragonFly FreeBSD glibc HPUX Interix mingw mintlib musl NetBSD OpenBSD SunOS uclibc Winnt"
USE_EXPAND_VALUES_KERNEL="AIX Darwin FreeBSD freemint HPUX linux NetBSD OpenBSD SunOS Winnt"
USE_EXPAND_VALUES_USERLAND="BSD GNU"
USE_ORDER="env:pkg:conf:defaults:pkginternal:repo:env.d"
VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l"
WINDOWID="39845901"
WINDOWPATH="7"
XDG_CONFIG_DIRS="/etc/xdg"
XDG_CURRENT_DESKTOP="XFCE"
XDG_DATA_DIRS="/usr/local/share:/usr/share"
XDG_MENU_PREFIX="xfce-"
XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
XTERM_LOCALE="C"
XTERM_SHELL="/bin/bash"
XTERM_VERSION="XTerm(327)"hackers - make sth real
academics - read sth said to be real
academics - read sth said to be real
@Sakaki (or anyone else who has experience on this): Do you have zswap enabled in kernel on your image? I wonder if it's of any advantage to use zswap, or does it just choke up the CPU when it starts to compress pages on RAM? I remember you can also change the compression algorithm...
@honeymak: Please use the code- tags when pasting logs etc...
@honeymak: Please use the code- tags when pasting logs etc...
..: Zucca :..
Code: Select all
init=/sbin/openrc-init
-systemd -logind -elogind seatdI am NaN! I am a man!
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
honeymak,
A few things, that's not the log I asked for. We need to see the binutils build log, so we can see what broke.
You are using the stable crossdev, I use the testing crossdev.
We both have the same default/linux/amd64/13.0/no-multilib profile.
You are using gcc-5.4.0 on your build host to build a gcc-6.3 cross compiler. That should word.
The switch to gcc-5.4.0 from gcc-4.x demands that you rebuild all your C++ code.
Did you follow the news item, if not, that's a problem.
Global -O3 is a very bad idea. It enables some optimisations that can affect the results of floating point calculations.
It turns on optimisations that make the compiled code bigger in an attempt to make it faster.
That's OK if the working set still fits into the CPU cache. If not, you get 'cache thrashing' where data that is needed immediately displaces data that will be needed in fractions of a second, causing that data to be fetched from main memory, which is 100s of times slower that CPU cache.
-O3 should only be used on a file by file basis where
a) you don't care about floating point results (or they are known to be unaffected.
b) where the working set size growth actually still delivers a speed improvement.
A few things, that's not the log I asked for. We need to see the binutils build log, so we can see what broke.
Code: Select all
$ eix crossdev
[I] sys-devel/crossdev
Available versions: 20151026-r1{tbz2} (~)20160602{tbz2} (~)20160602-r1{tbz2}We both have the same default/linux/amd64/13.0/no-multilib profile.
You are using gcc-5.4.0 on your build host to build a gcc-6.3 cross compiler. That should word.
The switch to gcc-5.4.0 from gcc-4.x demands that you rebuild all your C++ code.
Did you follow the news item, if not, that's a problem.
Code: Select all
CFLAGS="-march=native -mtune=native -fomit-frame-pointer -O3 -pipe" It turns on optimisations that make the compiled code bigger in an attempt to make it faster.
That's OK if the working set still fits into the CPU cache. If not, you get 'cache thrashing' where data that is needed immediately displaces data that will be needed in fractions of a second, causing that data to be fetched from main memory, which is 100s of times slower that CPU cache.
-O3 should only be used on a file by file basis where
a) you don't care about floating point results (or they are known to be unaffected.
b) where the working set size growth actually still delivers a speed improvement.
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
Zucca,
Yes, I use zswap on the Pi.
The Pi is IO impoverished. For bigger packages that have to be built with <j4, it has a spare core, or two, so CPU power for running the compression is not a problem.
Yes, I use zswap on the Pi.
The Pi is IO impoverished. For bigger packages that have to be built with <j4, it has a spare core, or two, so CPU power for running the compression is not a problem.
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Thanks Neddy.
Two more questions:NeddySeagoon wrote:For bigger packages that have to be built with <j4, it has a spare core, or two, so CPU power for running the compression is not a problem.
- Have you set the percentage of RAM where zswap starts to compress if it is exceeded?
- Which compression method do you use?
..: Zucca :..
Code: Select all
init=/sbin/openrc-init
-systemd -logind -elogind seatdI am NaN! I am a man!
localhost ~ # xzcat /var/log/portage/cross-aarch64-unknown-linux-gnu-binutils.log
Calculating dependencies
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
... done!
emerge: there are no ebuilds to satisfy "cross-aarch64-unknown-linux-gnu/binutil
emerge: searching for similar names... nothing similar found.
Calculating dependencies
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
... done!
emerge: there are no ebuilds to satisfy "cross-aarch64-unknown-linux-gnu/binutil
emerge: searching for similar names... nothing similar found.
hackers - make sth real
academics - read sth said to be real
academics - read sth said to be real
i found that i have made mistake about crossdev command args.
i can build the toolchain by crossdev now.
but i have another question now
how to emerge for arm64 in my x86 gentoo pc without distcc?
i mean i'd like to setup my x86 gentoo pc as binhost
i can build the toolchain by crossdev now.
but i have another question now
how to emerge for arm64 in my x86 gentoo pc without distcc?
i mean i'd like to setup my x86 gentoo pc as binhost
hackers - make sth real
academics - read sth said to be real
academics - read sth said to be real
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
honeymak,
The wiki has an example using the Raspberry Pi 1, armv6j-hardfloat-linux-gnueabi.
Where that page says armv6j-hardfloat-linux-gnueabi, you use aarch64-unknown-linux-gnu for arm64 on a 64 bit Pi.
Where it says Build the base system ... It can be built from scratch ... Its overly 'optimistic'
You can build most of a stage3 and lots of other things with a pure cross compile.
Perl and other things that build and execute code in the course of the build, will not cross compile.
Cross compiling gcc itself (the binary to run on the Pi) is difficult too.
There is another complication for building the stage3. The DEPENDS in ebuilds for the @system set are not complete. That's a deliberate
design decision to break all the circular dependencies that would otherwise occur. Its normally not a problem as the @system is considered to always be installed.
However, when you start cross building @system, /usr/aarch64-unknown-linux-gnu/ is empty, so portage gets the build order incorrect and things fail for missing
dependencies. That's a feature. Several runs of will fill in the gaps, as much as its going to.
cross distcc is the path of least resistance.
When you build things for arm64, the packages will be in /usr/aarch64-unknown-linux-gnu/packages/ unless you change that.
The wiki has an example using the Raspberry Pi 1, armv6j-hardfloat-linux-gnueabi.
Where that page says armv6j-hardfloat-linux-gnueabi, you use aarch64-unknown-linux-gnu for arm64 on a 64 bit Pi.
Where it says Build the base system ... It can be built from scratch ... Its overly 'optimistic'
You can build most of a stage3 and lots of other things with a pure cross compile.
Perl and other things that build and execute code in the course of the build, will not cross compile.
Cross compiling gcc itself (the binary to run on the Pi) is difficult too.
There is another complication for building the stage3. The DEPENDS in ebuilds for the @system set are not complete. That's a deliberate
design decision to break all the circular dependencies that would otherwise occur. Its normally not a problem as the @system is considered to always be installed.
However, when you start cross building @system, /usr/aarch64-unknown-linux-gnu/ is empty, so portage gets the build order incorrect and things fail for missing
dependencies. That's a feature. Several runs of
Code: Select all
aarch64-unknown-linux-gnu-emerge @systemcross distcc is the path of least resistance.
When you build things for arm64, the packages will be in /usr/aarch64-unknown-linux-gnu/packages/ unless you change that.
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
I saw a video on you tube where a guy sends a command to the RPi3 firmware (from a OS that's on the SDcard) to enable booting from USB directly. The only drawback was that RPi3 "probes" the USB longer than SDCard. Around 5 seconds.
Anyone tried this?
Anyone tried this?
..: Zucca :..
Code: Select all
init=/sbin/openrc-init
-systemd -logind -elogind seatdI am NaN! I am a man!
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
Zucca,
I understand that
a) its not reversable
b) needs a suitable CPU
as it involves fusing a fuseable link in the CPU. If it doesn't work properly, your Pi is scrap.
I'm not short of small microSD cards, so its not worth the risk.
I have /boot on the SD card and everything else on a USB SSD.
However, it would be good with the upstream kernel as that won't drive the Pi microSD interface yet.
I understand that
a) its not reversable
b) needs a suitable CPU
as it involves fusing a fuseable link in the CPU. If it doesn't work properly, your Pi is scrap.
I'm not short of small microSD cards, so its not worth the risk.
I have /boot on the SD card and everything else on a USB SSD.
However, it would be good with the upstream kernel as that won't drive the Pi microSD interface yet.
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Thanks Neddy.
I guess the microchips nowdays have still these kinds of "teeths", "resistors", fuseable links that are triggered via software. The main difference is that even with a soldering iron you cannot reverse the setting. :\
I remember back in 90's it was quite common that if a control board of household appliance (washing machine, dishwasher...) had to replaced, the service guy needed to cut some resistors off or cut some of, so called, the teeths off from the PCB so that the control board then matched the appliance being repaired. Knowing what each tooth or resistor (bit basically) did, one could add new features to the appliance. In around 2000's came all the programmable microcontrollers and the game was lost. :)NeddySeagoon wrote:it involves fusing a fuseable link in the CPU. If it doesn't work properly, your Pi is scrap.
I guess the microchips nowdays have still these kinds of "teeths", "resistors", fuseable links that are triggered via software. The main difference is that even with a soldering iron you cannot reverse the setting. :\
..: Zucca :..
Code: Select all
init=/sbin/openrc-init
-systemd -logind -elogind seatdI am NaN! I am a man!
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
Hi Guys,
I am coming to ask another question.
It's recommended NOT to use -march=native -mtune=native for RPi3 distcc,
But what if I firstly use the RPi3 as the distcc client and other RPi3 as the distcc server?
I mean maybe I am having 1 RPi3 client and several, say 3-5, RPi3 server?
Will this work?
Just wondering whether I will be buying more RPi3s
I am coming to ask another question.
It's recommended NOT to use -march=native -mtune=native for RPi3 distcc,
But what if I firstly use the RPi3 as the distcc client and other RPi3 as the distcc server?
I mean maybe I am having 1 RPi3 client and several, say 3-5, RPi3 server?
Will this work?
Just wondering whether I will be buying more RPi3s
hackers - make sth real
academics - read sth said to be real
academics - read sth said to be real
- NeddySeagoon
- Administrator
- Posts: 56085
- Joined: Sat Jul 05, 2003 9:37 am
- Location: 56N 3W
honeymak,
distcc detects that -march=native is in use and no longer distributes, since getting back native code for some other arch leads to a bit of a mess.
Old versions of distcc don't do this check :)
To use distcc, ask the system to be helped what -march=native means and put that in CFLAGS.
You need gcc-6 on arm64 for that to work.
Why not use your desktop to help the Pi? Research crossdev.
The Raspberry Pi 3 64 bit Install guide shows how to build the cross toolchain, and use it for the kernel.
You add normal distcc to the mix and ensure that identical gcc is selected on the Pi and the helper(s), then it just works.
distcc detects that -march=native is in use and no longer distributes, since getting back native code for some other arch leads to a bit of a mess.
Old versions of distcc don't do this check :)
To use distcc, ask the system to be helped what -march=native means and put that in CFLAGS.
You need gcc-6 on arm64 for that to work.
Why not use your desktop to help the Pi? Research crossdev.
The Raspberry Pi 3 64 bit Install guide shows how to build the cross toolchain, and use it for the kernel.
You add normal distcc to the mix and ensure that identical gcc is selected on the Pi and the helper(s), then it just works.
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.