perl upgrade slot conflict

[queen]

OP, did you resolve your issue? I'm going suggest what worked fine for me on x86 and amd64 without knowing more details on your end.

• Consider a current tree sync just to help eliminate any unknowns as I cannot recreate your issue.
• On both I did a standard emerge -avuND @world which updated perl and later errored out elsewhere (another package) with the post messages (w.r.t. perl core package from world file removal and updating perl virtuals).
• The next step following that suggestion was to ensure no perl-core packages were in your world file and to then update the perl virtuals. This should and seems to eliminate the blocker issues (for most of us).
• Once prior step was successful then run perl-cleaner --reallyall.
• Finally, if successful, resume emerge -avuND @world.
• If that succeeded, then a emerge -ac after (aka depclean).

The problem is partially solved. I have perl updated to 5.18 and all the rest packages updated as well (perl virtuals, dev-perl, dev-lang/perl). However in update-world script, it tries to pull perl 5.16 and I get also slot conflict. There is no perl-core in world file. here is a partial output of the slot conflict

Code: Select all

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-lang/perl:0

  (dev-lang/perl-5.16.3::gentoo, ebuild scheduled for merge) pulled in by
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/XML-SAX-Base-1.80.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/XML-Simple-2.200.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/XML-NamespaceSupport-1.110.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/LWP-MediaTypes-6.20.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/libintl-perl-1.200.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/LWP-Protocol-https-6.30.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Text-Unidecode-0.40.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-vcs/git-1.8.5.5::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/YAML-Syck-1.200.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/XML-SAX-0.990.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/XML-Parser-2.410.0-r2::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Parse-RecDescent-1.967.9-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Pango-1.224.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/DBI-1.623.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/HTML-Tagset-3.200.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Locale-gettext-1.50.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/HTTP-Cookies-6.0.1-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/IO-Socket-SSL-1.953.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Inline-0.500.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/libwww-perl-6.50.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/glib-perl-1.301.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/File-DesktopEntry-0.40.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/HTTP-Message-6.30.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/HTML-Parser-3.710.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Net-SMTP-SSL-1.10.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Archive-Zip-1.300.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/File-MimeInfo-0.170.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/WWW-RobotRules-6.20.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Error-0.170.210::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/extutils-depends-0.306.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Net-SSLeay-1.550::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/gtk2-perl-1.247.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Authen-SASL-2.160.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/HTTP-Negotiate-6.0.1-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Crypt-PasswdMD5-1.300.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Geo-IP-1.420.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/HTTP-Daemon-6.10.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Cairo-1.103.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (perl-core/Digest-SHA-5.820.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/XML-LibXML-2.1.400-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/DateManip-6.410.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Net-Daemon-0.480.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/DBD-mysql-4.20.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/File-BaseDir-0.30.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/URI-1.600.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/File-Listing-6.40.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Net-HTTP-6.60.0::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Digest-SHA1-2.130.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/HTTP-Date-6.20.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Encode-Locale-1.30.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Digest-HMAC-1.30.0-r1::gentoo, installed)
    dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/PlRPC-0.202.0-r2::gentoo, installed)

  (dev-lang/perl-5.18.2-r1::gentoo, installed) pulled in by
    =dev-lang/perl-5.18* required by (virtual/perl-Archive-Tar-1.900.0-r2::gentoo, installed)
    dev-lang/perl:0/5.18=[-build(-)] required by (perl-core/Version-Requirements-0.101.22-r1::gentoo, installed)
    (and 42 more with the same problems)

[charles17]

Did you happen to forget to run emerge --depclean?

[queen]

Did you happen to forget to run emerge --depclean?

No.

I managed to solve the problem. I ran perl-cleaner --reallyall after everything was updated to 5.18. In the end I ran update-world script which actually runs

Code: Select all

emerge -puvD world

. http://forums.gentoo.org/viewtopic-t-497125.html

[Navar]

So perhaps marking the topic as [solved] would be good.

[steveL]

However in update-world script, it tries to pull perl 5.16 and I get also slot conflict.
..
I ran update-world script which actually runs

Code: Select all

emerge -puvD world

Really you want to be doing:

Code: Select all

emerge -auvDN world --with-bdeps=y

for your full upgrade, especially for perl stuff, much of which is used at build-time. (with -p instead of -a in the script, ofc)

update does this by default (when run with no target and tree options), and provides -U as a shortcut for --changed-use (vs -N/--newuse).

I tend to run: update -uDU most of the time; it adds --with-bdeps=y when setting a default @system @world target, so I use update -uDU world (or equivalently -uDN world for main check) when I don't want the bdeps added (which won't happen when building to a ROOT, in any case.)

If you do try it, you want the 9999 version, as the other one is very out of date; it'll get updated once I've completed automation of perl/TC ABI warnings, but practically everyone I know who uses it, does so from git. Griz64 chases the QA end of it, very effectively imo, since he does too, and most of the people he supports aren't expert users (aka Gentooistas ;) like the forums-crowd.

Oh, add -a if you want it to ask for confirmation after the emerge --pretend run; otherwise it'll just go ahead, assuming it can, except when you've run it with no target: if it's interactive, in that case it'll ask, since you're doing the main run. More usually you have to confirm USE changes and the like.
Use -E to go straight to a dialog list. Otherwise you can select it with E/e (for edit list) when you're asked for confirmation.
And ofc, use -p if you just want to see what it'll do. update -h and --help are separate texts.
(Sorry for plug, didn't mean to go on so long: just don't want anyone to get a bad impression, if they do try it.)

[proteusx]

I had the same problem.
After the last world update many such unresolved conflicts appeared and
perl-cleaner would stop because of many conflicts between several perl
virtuals and perl-core packages. The offending perl-core modules had to be
uninstalled but they were far too many (and this had to be done for several
computers) to remove by hand, so I put together a small perl script to find
the perl-core's that conflicted with perl-virtuals:

Code: Select all

# conflicts.pl

my @virtuals = `qlist -IC virtual/perl-*`;
s/virtual\/perl-// foreach @virtuals;

my @cores = `qlist -IC perl-core\/*`;
s/perl-core\/// foreach @cores;

my ($core, $virtual);
foreach $virtual (@virtuals)
{
  chomp $virtual;
  foreach $core (@cores)
  {
    chomp $core;
    if ($core eq $virtual)
    {
      print "$virtual ";
      last;
    }
  }
} 

The script prints the names of all the conflicting packages, separated by
spaces, in a single line so it can be passed to emerge to remove them:

Code: Select all

emerge -Ca $(perl ./conflicts.pl)

Then I did:

Code: Select all

perl-cleaner --reallyall -- -a
emerge -aDuN world --with-bdeps=y

Whereby everything was back to normal.

[miroR]

...[snip]...

Code: Select all

#!/usr/bin/perl

# conflicts.pl

my @virtuals = `qlist -IC virtual/perl-*`;
s/virtual\/perl-// foreach @virtuals;

my @cores = `qlist -IC perl-core\/*`;
s/perl-core\/// foreach @cores;

my ($core, $virtual);
foreach $virtual (@virtuals)
{
  chomp $virtual;
  foreach $core (@cores)
  {
    chomp $core;
    if ($core eq $virtual)
    {
      print "$virtual ";
      last;
    }
  }
} 

...[snip]...

But I'm lying. You didn't provide the two top lines (second is empty) in the script. I added it for the rare newbie who would not know it otherwise... I know it's rare on these forums, but there happen them as well...
Thanks. Saved lots of pasting, typing and things.

[proteusx]

You didn't provide the two top lines (second is empty) in the script. I added it for the rare newbie who would not know it otherwise... I know it's rare on these forums, but there happen them as well...

I omitted the shebang on purpose; since we call perl to execute the script, the shebang is immaterial.

Code: Select all

emerge -Ca $(perl ./conflicts.pl)

Otherwise we have to make the script executable:

Code: Select all

chmod +x conflicts.pl
emerge -Ca $(./conflicts.pl)

[miroR]

You didn't provide the two top lines (second is empty) in the script. I added it for the rare newbie who would not know it otherwise... I know it's rare on these forums, but there happen them as well...

I omitted the shebang on purpose; since we call perl to execute the script, the shebang is immaterial.

Code: Select all

emerge -Ca $(perl ./conflicts.pl)

Otherwise we have to make the script executable:

Code: Select all

chmod +x conflicts.pl
emerge -Ca $(./conflicts.pl)

OK. Don't really remember my exact steps all these hours later. I surely found all the rest of the info in the previous posts (and wouldn't get to perl-5.20 --which I happily now have-- without extra pasting and typing had you not provided this nice snippet of code). So, it's just fine.

[sr66]

Code: Select all

emerge -av -1 --no-deps =dev-lang/perl-5.18* $(eix '-I#' 'virtual/perl-*') dev-perl/extutils-pkgconfig
perl-cleaner --reallyall --  -av
emerge -avuDN world --with-bdeps=y

Thanks. This worked for me as well.

[dilfridge]

Code: Select all

emerge -uD1a $(qlist -IC 'virtual/perl-*')

Try ommitting the -D

[quad]

Hi,

I've also had these problems when upgrading from 5.16 to 5.18, which I fought through much trial and error. I've just encountered the same issue upgrading from 5.18 to 5.20 and here's the command line that actually worked by itself without uninstalling anything:

Code: Select all

sudo emerge -va1D dev-lang/perl $(qlist -CI dev-perl/) $(qlist -CI virtual/perl)

[dilfridge]

OP, did you resolve your issue? I'm going suggest what worked fine for me on x86 and amd64 without knowing more details on your end.

• Consider a current tree sync just to help eliminate any unknowns as I cannot recreate your issue.
• On both I did a standard emerge -avuND @world which updated perl and later errored out elsewhere (another package) with the post messages (w.r.t. perl core package from world file removal and updating perl virtuals).
• The next step following that suggestion was to ensure no perl-core packages were in your world file and to then update the perl virtuals. This should and seems to eliminate the blocker issues (for most of us).
• Once prior step was successful then run perl-cleaner --reallyall.
• Finally, if successful, resume emerge -avuND @world.
• If that succeeded, then a emerge -ac after (aka depclean).

It might be worth trying

Code: Select all

emerge -uNav world

(i.e. without the -D option). There might be a bug in portage triggered by -D.

[The_Great_Sephiroth]

Perl is really messing up right now, but John helped me resolve it this morning. I have a thread here about it. Something was wrong with the dependency resolver and there may be a portage tree issue. At least those are his suspicions.

*EDIT*

Here's a link to the second page, where we figured it all out. Note that this was on a new install and it was udev-init-scripts which was at fault. After updating it, then updating openrc, the Perl stuff disappeared.

Perl, Portage, and a possible solution

[carlosp]

Thanks quad. That worked here.

[CheerfulBoy]

Hi,

I've also had these problems when upgrading from 5.16 to 5.18, which I fought through much trial and error. I've just encountered the same issue upgrading from 5.18 to 5.20 and here's the command line that actually worked by itself without uninstalling anything:

Code: Select all

sudo emerge -va1D dev-lang/perl $(qlist -CI dev-perl/) $(qlist -CI virtual/perl)

Big thanks! Thats works for me.

[dilfridge]

Hi,

I've also had these problems when upgrading from 5.16 to 5.18, which I fought through much trial and error. I've just encountered the same issue upgrading from 5.18 to 5.20 and here's the command line that actually worked by itself without uninstalling anything:

Code: Select all

sudo emerge -va1D dev-lang/perl $(qlist -CI dev-perl/) $(qlist -CI virtual/perl)

Big thanks! Thats works for me.

Excellent. Brace yourself, Perl 5.22 is coming to ~arch soon...

[msst]

And it got me already. Huge amount of blocks all centering around perl 5.20 and 5.22 slot conflict.

Code: Select all

emerge -va1D dev-lang/perl $(qlist -CI dev-perl/) $(qlist -CI virtual/perl)

this time also does not work. So I unmerged the whole perl crap now with

emerge --unmerge $(qlist -CI dev-perl/) $(qlist -CI virtual/perl)

and hope to reconstruct it. Let us see, if that monster task works.

Really, something has to change with perl and portage...

[ct85711]

I will say, just blindly uninstalling stuff and not paying attention is a easy recipe to break your system.

[proteusx]

and hope to reconstruct it. Let us see, if that monster task works.

Any luck?

[Buffoon]

I backed up my old perl with quickpkg, then emerge -av1u --nodeps perl, followed by perl-cleaner --all and depclean. Seems everything is fine now.

[frostschutz]

It's 2015 and Gentoo is still Gentoo . Wheee!

[msst]

Any luck?

Yes, it took a while and was quite painful though. After unmerging quite a lot I did

1) First emerge -av package separately on everything that wasn't directly pulling perl in, so that the complexity of the emerge world go down

2) Then what finally did the trick was emerge --with-bdeps=y --backtrack=64 world. It needed the insane high backtrack (30 and also 48 failed) and took almost 20 minutes per try. Until this "magic combo" finally started to work. Huge recompile.

3) Followed by a crazy perl-updater and revdep-rebuild run.

Really, the complexity of the perl update interdependancies are getting close to kill the gentoo build system. Could some perl-metapackages help bringing that down perhaps?

[sebekk23]

Personally I'd just get what I needed in, so do something along the lines of:

Code: Select all

emerge -av -1 --no-deps =dev-lang/perl-5.18* $(eix '-I#' 'virtual/perl-*') dev-perl/extutils-pkgconfig
perl-cleaner --reallyall --  -av
emerge -avuDN world --with-bdeps=y

Thanks, steveL, that did it for me!

i'm grateful - really, on my old gento it helps me a lot with perl dependencies ...thx

[Naib]

this perl upgrade does appear to be a right mess... I have been trying for a couple of weeks w.r.t. perl 5.20 -> perl-5.22 and multiple slot conflicts keep causing issues (perl-cleaner is equally failing...)

2weeks later and the list of other packages that need updating is growing as well...

Code: Select all

perl-cleaner --reallyall 
 * Removing perl-core packages from world file
 *    emerge --deselect  perl-core/CPAN-Meta perl-core/Data-Dumper perl-core/Encode perl-core/ExtUtils-MakeMaker perl-core/ExtUtils-Manifest perl-core/File-Temp perl-core/libnet perl-core/Module-CoreList 
>>> No matching atoms found in "world" favorites file...
 * Updating installed Perl virtuals
 *    emerge -u1  virtual/perl-Archive-Tar virtual/perl-Carp virtual/perl-Compress-Raw-Bzip2 virtual/perl-Compress-Raw-Zlib virtual/perl-CPAN-Meta virtual/perl-CPAN-Meta-Requirements virtual/perl-CPAN-Meta-YAML virtual/perl-Data-Dumper virtual/perl-Digest virtual/perl-Digest-MD5 virtual/perl-Digest-SHA virtual/perl-Encode virtual/perl-Exporter virtual/perl-ExtUtils-CBuilder virtual/perl-ExtUtils-Command virtual/perl-ExtUtils-Install virtual/perl-ExtUtils-MakeMaker virtual/perl-ExtUtils-Manifest virtual/perl-ExtUtils-ParseXS virtual/perl-File-Path virtual/perl-File-Spec virtual/perl-File-Temp virtual/perl-Getopt-Long virtual/perl-IO virtual/perl-IO-Compress virtual/perl-JSON-PP virtual/perl-libnet virtual/perl-MIME-Base64 virtual/perl-Module-Build virtual/perl-Module-CoreList virtual/perl-Module-Metadata virtual/perl-Parse-CPAN-Meta virtual/perl-Perl-OSType virtual/perl-Storable virtual/perl-Test-Harness virtual/perl-Test-Simple virtual/perl-Text-ParseWords virtual/perl-Time-Local virtual/perl-version 

 * IMPORTANT: 3 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.

Calculating dependencies... done!
>>> Jobs: 0 of 0 complete                           Load avg: 2.20, 3.62, 3.64
>>> Auto-cleaning packages...

>>> No outdated packages were found on your system.

 * Beginning a clean up of .ph files
 * Excluding files for 0.0.0 and 0.0.0/x86_64-linux from cleaning

 * Locating ph files for removal

 * Updating ph files.
 * Ignore all "No such file..." messages!
Can't open machine/ansi.h: No such file or directory
Can't open sys/_types.h: No such file or directory
Can't open gnu/stubs-x32.h: No such file or directory
Can't open gnu/stubs-x32.h: No such file or directory
Can't open gnu/stubs-x32.h: No such file or directory
Can't open gnu/stubs-x32.h: No such file or directory

 * Locating packages for an update
 * Locating ebuilds linked against libperl
 *   Adding to list: net-fs/samba:0
 *   Adding to list: net-irc/pisg:0
 *   Adding to list: net-irc/irssi:0
 *   Adding to list: dev-vcs/gitolite:0
 *   Adding to list: dev-vcs/git:0
 *   Adding to list: perl-core/ExtUtils-Manifest:0
 *                   virtual/perl-ExtUtils-Manifest:0
 *   Adding to list: perl-core/CPAN-Meta:0
 *                   virtual/perl-CPAN-Meta:0
 *   Adding to list: perl-core/libnet:0
 *                   virtual/perl-libnet:0
 *   Adding to list: perl-core/Data-Dumper:0
 *                   virtual/perl-Data-Dumper:0
 *   Adding to list: perl-core/Encode:0
 *                   virtual/perl-Encode:0
 *   Adding to list: perl-core/ExtUtils-MakeMaker:0
 *                   virtual/perl-ExtUtils-MakeMaker:0
 *   Adding to list: perl-core/File-Temp:0
 *                   virtual/perl-File-Temp:0
 *   Adding to list: perl-core/Module-CoreList:0
 *                   virtual/perl-Module-CoreList:0
 *   Adding to list: x11-terms/rxvt-unicode:0
 *   Adding to list: dev-python/subunit:0
 *   Adding to list: dev-perl/XML-XPath:0
 *   Adding to list: dev-perl/XML-Twig:0
 *   Adding to list: dev-perl/IO-String:0
 *   Adding to list: dev-perl/ExtUtils-Depends:0
 *   Adding to list: dev-perl/Linux-DesktopFiles:0
 *   Adding to list: dev-perl/HTTP-Daemon:0
 *   Adding to list: dev-perl/OLE-StorageLite:0
 *   Adding to list: dev-perl/IO-stringy:0
 *   Adding to list: dev-perl/Crypt-PasswdMD5:0
 *   Adding to list: dev-perl/XML-NamespaceSupport:0
 *   Adding to list: dev-perl/File-BaseDir:0
 *   Adding to list: dev-perl/IO-Socket-SSL:0
 *   Adding to list: dev-perl/Net-DBus:0
 *   Adding to list: dev-perl/XML-Filter-BufferText:0
 *   Adding to list: dev-perl/File-MimeInfo:0
 *   Adding to list: dev-perl/Locale-gettext:0
 *   Adding to list: dev-perl/LWP-MediaTypes:0
 *   Adding to list: dev-perl/Encode-Locale:0
 *   Adding to list: dev-perl/SGMLSpm:0
 *   Adding to list: dev-perl/DateManip:0
 *   Adding to list: dev-perl/Text-Iconv:0
 *   Adding to list: dev-perl/HTML-Tagset:0
 *   Adding to list: dev-perl/JSON:0
 *   Adding to list: dev-perl/Data-Dump:0
 *   Adding to list: dev-perl/libxml-perl:0
 *   Adding to list: dev-perl/libwww-perl:0
 *   Adding to list: dev-perl/Authen-SASL:0
 *   Adding to list: dev-perl/Unicode-EastAsianWidth:0
 *   Adding to list: dev-perl/Archive-Zip:0
 *   Adding to list: dev-perl/XML-Simple:0
 *   Adding to list: dev-perl/Module-Build:0
 *   Adding to list: dev-perl/Unicode-Map:0
 *   Adding to list: dev-perl/HTTP-Date:0
 *   Adding to list: dev-perl/XML-Parser:0
 *   Adding to list: dev-perl/URI:0
 *   Adding to list: dev-perl/XML-LibXML:0
 *   Adding to list: dev-perl/Text-CSV_XS:0
 *   Adding to list: dev-perl/File-DesktopEntry:0
 *   Adding to list: dev-perl/XML-SAX-Base:0
 *   Adding to list: dev-perl/yaml:0
 *   Adding to list: dev-perl/HTTP-Negotiate:0
 *   Adding to list: dev-perl/Net-SSLeay:0
 *   Adding to list: dev-perl/extutils-pkgconfig:0
 *   Adding to list: dev-perl/WWW-RobotRules:0
 *   Adding to list: dev-perl/Text-Unidecode:0
 *   Adding to list: dev-perl/Crypt-RC4:0
 *   Adding to list: dev-perl/Digest-SHA1:0
 *   Adding to list: dev-perl/Digest-Perl-MD5:0
 *   Adding to list: dev-perl/libintl-perl:0
 *   Adding to list: dev-perl/XML-SAX:0
 *   Adding to list: dev-perl/HTTP-Message:0
 *   Adding to list: dev-perl/HTML-Parser:0
 *   Adding to list: dev-perl/IO-HTML:0
 *   Adding to list: dev-perl/Tie-IxHash:0
 *   Adding to list: dev-perl/Net-HTTP:0
 *   Adding to list: dev-perl/HTTP-Cookies:0
 *   Adding to list: dev-perl/LWP-Protocol-https:0
 *   Adding to list: dev-perl/Error:0
 *   Adding to list: dev-perl/Spreadsheet-ParseExcel:0
 *   Adding to list: dev-perl/File-Listing:0
 *   Adding to list: dev-perl/Digest-HMAC:0
 *   Adding to list: dev-perl/Net-SMTP-SSL:0
 *   Adding to list: dev-perl/Cairo:0
 *   Adding to list: dev-perl/XML-Handler-YAWriter:0
 *   Adding to list: dev-perl/XML-SAX-Writer:0
 * emerge -v1 --backtrack=200 net-fs/samba:0 net-irc/pisg:0 net-irc/irssi:0 dev-vcs/gitolite:0 dev-vcs/git:0 perl-core/ExtUtils-Manifest:0 virtual/perl-ExtUtils-Manifest:0 perl-core/CPAN-Meta:0 virtual/perl-CPAN-Meta:0 perl-core/libnet:0 virtual/perl-libnet:0 perl-core/Data-Dumper:0 virtual/perl-Data-Dumper:0 perl-core/Encode:0 virtual/perl-Encode:0 perl-core/ExtUtils-MakeMaker:0 virtual/perl-ExtUtils-MakeMaker:0 perl-core/File-Temp:0 virtual/perl-File-Temp:0 perl-core/Module-CoreList:0 virtual/perl-Module-CoreList:0 x11-terms/rxvt-unicode:0 dev-python/subunit:0 dev-perl/XML-XPath:0 dev-perl/XML-Twig:0 dev-perl/IO-String:0 dev-perl/ExtUtils-Depends:0 dev-perl/Linux-DesktopFiles:0 dev-perl/HTTP-Daemon:0 dev-perl/OLE-StorageLite:0 dev-perl/IO-stringy:0 dev-perl/Crypt-PasswdMD5:0 dev-perl/XML-NamespaceSupport:0 dev-perl/File-BaseDir:0 dev-perl/IO-Socket-SSL:0 dev-perl/Net-DBus:0 dev-perl/XML-Filter-BufferText:0 dev-perl/File-MimeInfo:0 dev-perl/Locale-gettext:0 dev-perl/LWP-MediaTypes:0 dev-perl/Encode-Locale:0 dev-perl/SGMLSpm:0 dev-perl/DateManip:0 dev-perl/Text-Iconv:0 dev-perl/HTML-Tagset:0 dev-perl/JSON:0 dev-perl/Data-Dump:0 dev-perl/libxml-perl:0 dev-perl/libwww-perl:0 dev-perl/Authen-SASL:0 dev-perl/Unicode-EastAsianWidth:0 dev-perl/Archive-Zip:0 dev-perl/XML-Simple:0 dev-perl/Module-Build:0 dev-perl/Unicode-Map:0 dev-perl/HTTP-Date:0 dev-perl/XML-Parser:0 dev-perl/URI:0 dev-perl/XML-LibXML:0 dev-perl/Text-CSV_XS:0 dev-perl/File-DesktopEntry:0 dev-perl/XML-SAX-Base:0 dev-perl/yaml:0 dev-perl/HTTP-Negotiate:0 dev-perl/Net-SSLeay:0 dev-perl/extutils-pkgconfig:0 dev-perl/WWW-RobotRules:0 dev-perl/Text-Unidecode:0 dev-perl/Crypt-RC4:0 dev-perl/Digest-SHA1:0 dev-perl/Digest-Perl-MD5:0 dev-perl/libintl-perl:0 dev-perl/XML-SAX:0 dev-perl/HTTP-Message:0 dev-perl/HTML-Parser:0 dev-perl/IO-HTML:0 dev-perl/Tie-IxHash:0 dev-perl/Net-HTTP:0 dev-perl/HTTP-Cookies:0 dev-perl/LWP-Protocol-https:0 dev-perl/Error:0 dev-perl/Spreadsheet-ParseExcel:0 dev-perl/File-Listing:0 dev-perl/Digest-HMAC:0 dev-perl/Net-SMTP-SSL:0 dev-perl/Cairo:0 dev-perl/XML-Handler-YAWriter:0 dev-perl/XML-SAX-Writer:0

 * IMPORTANT: 3 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.


These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R    ] virtual/perl-Data-Dumper-2.158.0::gentoo  0 KiB
[ebuild   R    ] perl-core/File-Temp-0.230.400-r1::gentoo  0 KiB
[ebuild   R    ] virtual/perl-ExtUtils-MakeMaker-7.40.100_rc::gentoo  0 KiB
[ebuild  N     ] virtual/perl-Scalar-List-Utils-1.410.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/XML-NamespaceSupport-1.110.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/XML-Parser-2.440.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/LWP-MediaTypes-6.20.0-r1::gentoo  0 KiB
[ebuild   R    ] virtual/perl-ExtUtils-Manifest-1.700.0-r1::gentoo  0 KiB
[ebuild   R    ] virtual/perl-libnet-3.50.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/Encode-Locale-1.30.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/Text-Iconv-1.700.0-r1::gentoo  0 KiB
[ebuild   R    ] perl-core/Encode-2.730.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/OLE-StorageLite-0.190.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/HTML-Tagset-3.200.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/Unicode-Map-0.112.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/XML-SAX-Base-1.80.0-r1::gentoo  0 KiB
[ebuild     U  ] dev-perl/Net-SSLeay-1.650.0-r1::gentoo [1.650.0::gentoo] 0 KiB
[ebuild   R    ] dev-perl/extutils-pkgconfig-1.150.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/Crypt-RC4-2.020.0-r1::gentoo  0 KiB
[ebuild   R    ] perl-core/ExtUtils-Manifest-1.700.0::gentoo  0 KiB
[ebuild   R    ] perl-core/Module-CoreList-5.201.505.200::gentoo  0 KiB
[ebuild   R    ] virtual/perl-Module-CoreList-5.201.505.200-r2::gentoo  0 KiB
[ebuild   R    ] dev-perl/IO-String-1.80.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/SGMLSpm-1.03-r7::gentoo  0 KiB
[ebuild   R    ] dev-perl/Data-Dump-1.230.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/libintl-perl-1.240.0::gentoo  0 KiB
[ebuild   R    ] virtual/perl-File-Temp-0.230.400-r3::gentoo  0 KiB
[ebuild   R    ] dev-perl/HTTP-Date-6.20.0-r1::gentoo  0 KiB
[ebuild   R    ] virtual/perl-Encode-2.730.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/URI-1.680.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] virtual/perl-CPAN-Meta-2.150.1::gentoo  0 KiB
[ebuild   R    ] dev-perl/IO-Socket-SSL-2.12.0::gentoo  USE="-idn" 0 KiB
[ebuild   R    ] dev-perl/XML-XPath-1.130.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/ExtUtils-Depends-0.404.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/IO-stringy-2.111.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/JSON-2.900.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/libxml-perl-0.80.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/Text-CSV_XS-1.190.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/Digest-Perl-MD5-1.900.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/HTML-Parser-3.710.0-r1::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/Digest-HMAC-1.30.0-r1::gentoo  0 KiB
[ebuild   R    ] net-irc/pisg-0.73-r1::gentoo  0 KiB
[ebuild   R    ] perl-core/CPAN-Meta-2.143.240::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] perl-core/libnet-1.270.0::gentoo  USE="-sasl" 0 KiB
[ebuild   R    ] perl-core/Data-Dumper-2.154.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/yaml-1.150.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/Text-Unidecode-1.230.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/Digest-SHA1-2.130.0-r1::gentoo  0 KiB
[ebuild     U  ] dev-perl/Module-Build-0.421.400::gentoo [0.420.500::gentoo] USE="{-test}" 298 KiB
[ebuild   R    ] dev-perl/Net-HTTP-6.60.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/Authen-SASL-2.160.0-r1::gentoo  USE="-kerberos" 0 KiB
[ebuild   R    ] dev-perl/WWW-RobotRules-6.20.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/IO-HTML-1.1.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/File-Listing-6.40.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/Net-SMTP-SSL-1.30.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/XML-Handler-YAWriter-0.230.0-r1::gentoo  0 KiB
[ebuild   R    ] perl-core/ExtUtils-MakeMaker-7.40.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/Archive-Zip-1.490.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/Spreadsheet-ParseExcel-0.650.0::gentoo  USE="unicode -cjk {-test}" 0 KiB
[ebuild   R    ] dev-perl/File-BaseDir-0.30.0-r1::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/HTTP-Message-6.60.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/Tie-IxHash-1.230.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/Error-0.170.240::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] net-irc/irssi-0.8.17::gentoo  USE="ipv6 perl proxy ssl (-selinux) -socks5" 0 KiB
[ebuild   R    ] x11-terms/rxvt-unicode-9.21::gentoo  USE="256-color fading-colors focused-urgency font-styles mousewheel perl startup-notification vanilla xft -alt-font-width -blink -buffer-on-clear -iso14755 -pixbuf -secondary-wheel -unicode3 -wcwidth" 0 KiB
[ebuild   R    ] dev-perl/Linux-DesktopFiles-0.90.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/Crypt-PasswdMD5-1.400.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/DateManip-6.490.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/File-DesktopEntry-0.40.0-r1::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/HTTP-Daemon-6.10.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/HTTP-Negotiate-6.0.1-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/HTTP-Cookies-6.0.1-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/libwww-perl-6.50.0::gentoo  USE="ssl" 0 KiB
[ebuild   R    ] dev-perl/LWP-Protocol-https-6.60.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/XML-SAX-0.990.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/File-MimeInfo-0.270.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/XML-Filter-BufferText-1.10.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/XML-LibXML-2.12.100::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/XML-SAX-Writer-0.560.0::gentoo  0 KiB
[ebuild   R    ] dev-perl/XML-Simple-2.200.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/XML-Twig-3.490.0::gentoo  USE="nls" 0 KiB
[ebuild   R    ] dev-python/mimeparse-0.1.4-r1::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3%" 0 KiB
[ebuild     U  ] dev-python/packaging-15.3-r1::gentoo [15.3::gentoo] USE="{-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/colorama-0.3.3::gentoo  USE="-examples" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3%" 0 KiB
[ebuild   R    ] dev-python/distlib-0.2.1::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-perl/Net-DBus-1.0.0-r1::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-perl/Locale-gettext-1.50.0-r1::gentoo  0 KiB
[ebuild   R    ] dev-perl/Cairo-1.105.0::gentoo  USE="{-test}" 0 KiB
[ebuild   R    ] dev-python/six-1.9.0-r1::gentoo  USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/extras-0.0.3::gentoo  USE="{-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3%" 0 KiB
[ebuild   R    ] dev-python/ipaddress-1.0.14::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/progress-1.2::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/chardet-2.3.0::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/requests-2.7.0::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/retrying-1.3.3::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/html5lib-0.999999::gentoo  USE="{-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild     U  ] dev-vcs/git-2.5.1::gentoo [2.5.0::gentoo] USE="blksha1 curl gpg gtk iconv nls pcre perl python threads tk webdav -cgi -cvs -doc -emacs -gnome-keyring -highlight -mediawiki (-ppcsha1) -subversion {-test} -xinetd" PYTHON_TARGETS="python2_7" 4,024 KiB
[ebuild   R    ] dev-vcs/gitolite-3.6.3::gentoo  USE="(-selinux) -tools -vim-syntax" 0 KiB
[ebuild     U  ] dev-python/pbr-1.6.0::gentoo [1.2.0::gentoo] USE="{-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy% -pypy3%" 98 KiB
[ebuild  N     ] dev-python/lockfile-0.10.2::gentoo  USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4 -pypy -pypy3" 0 KiB
[ebuild  N     ] dev-python/CacheControl-0.11.5::gentoo  USE="-redis {-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4 -pypy -pypy3" 0 KiB
[ebuild     U  ] dev-python/pip-7.1.2::gentoo [7.0.3::gentoo] PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild   R    ] dev-python/linecache2-1.0.0::gentoo  USE="{-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy% -pypy3%" 0 KiB
[ebuild   R    ] dev-python/traceback2-1.4.0::gentoo  PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy% -pypy3%" 0 KiB
[ebuild     U  ] dev-python/unittest2-1.1.0::gentoo [1.0.1-r1::gentoo] PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy% -pypy3%" 80 KiB
[ebuild     U  ] dev-python/testtools-1.8.0::gentoo [1.7.1::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy% -pypy3%" 204 KiB
[ebuild   R    ] dev-python/subunit-1.1.0::gentoo  USE="-static-libs {-test}" ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python2_7 python3_4* -pypy -pypy3% -python3_3*" 0 KiB
[ebuild   R    ] net-fs/samba-4.1.19::gentoo  USE="acl client cups fam winbind -addns -ads -aio -avahi -cluster -dmapi -gnutls -iprint -ldap -quota (-selinux) -syslog -systemd {-test}" PYTHON_TARGETS="python2_7" 0 KiB
[blocks B      ] <perl-core/ExtUtils-MakeMaker-7.40.100_rc ("<perl-core/ExtUtils-MakeMaker-7.40.100_rc" is blocking virtual/perl-ExtUtils-MakeMaker-7.40.100_rc)
[blocks B      ] <perl-core/libnet-3.50.0 ("<perl-core/libnet-3.50.0" is blocking virtual/perl-libnet-3.50.0)
[blocks B      ] <perl-core/Data-Dumper-2.158.0 ("<perl-core/Data-Dumper-2.158.0" is blocking virtual/perl-Data-Dumper-2.158.0)

Total: 109 packages (8 upgrades, 3 new, 98 reinstalls), Size of downloads: 4,702 KiB
Conflict: 3 blocks (3 unsatisfied)

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-perl/Module-Build:0

  (dev-perl/Module-Build-0.421.400:0/0::gentoo, ebuild scheduled for merge) pulled in by
    dev-perl/Module-Build:0 (Argument)

  (dev-perl/Module-Build-0.420.500:0/0::gentoo, installed) pulled in by
    ~dev-perl/Module-Build-0.420.500 required by (virtual/perl-Module-Build-0.420.500-r2:0/0::gentoo, installed)
    ^                      ^^^^^^^^^                                                                                                                                   


It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously.  If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.

For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.


 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (virtual/perl-libnet-3.50.0:0/0::gentoo, ebuild scheduled for merge) pulled in by
    virtual/perl-libnet:0
    virtual/perl-libnet required by (dev-perl/libwww-perl-6.50.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-libnet required by (dev-perl/Net-SMTP-SSL-1.30.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-libnet required by @selected

  (virtual/perl-ExtUtils-MakeMaker-7.40.100_rc:0/0::gentoo, ebuild scheduled for merge) pulled in by
    >=virtual/perl-ExtUtils-MakeMaker-6.56 required by (perl-core/CPAN-Meta-2.143.240:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/JSON-2.900.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Module-Build-0.421.400:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/IO-stringy-2.111.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker:0
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/LWP-Protocol-https-6.60.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/URI-1.680.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/IO-Socket-SSL-2.12.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Net-SMTP-SSL-1.30.0:0/0::gentoo, ebuild scheduled for merge)
    >=virtual/perl-ExtUtils-MakeMaker-6.300.0 required by (dev-perl/IO-HTML-1.1.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/ExtUtils-Depends-0.404.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/File-MimeInfo-0.270.0:0/0::gentoo, ebuild scheduled for merge)
    =virtual/perl-ExtUtils-MakeMaker-7.40.100_rc required by (dev-perl/Module-Build-0.421.400:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/yaml-1.150.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Archive-Zip-1.490.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Spreadsheet-ParseExcel-0.650.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Unicode-EastAsianWidth-1.330.0-r1:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Digest-Perl-MD5-1.900.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Cairo-1.105.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Text-CSV_XS-1.190.0:0/0::gentoo, ebuild scheduled for merge)
    virtual/perl-ExtUtils-MakeMaker required by (dev-perl/Text-Unidecode-1.230.0:0/0::gentoo, ebuild scheduled for merge)

  (perl-core/libnet-1.270.0:0/0::gentoo, ebuild scheduled for merge) pulled in by
    perl-core/libnet:0

  (perl-core/ExtUtils-MakeMaker-7.40.0-r1:0/0::gentoo, ebuild scheduled for merge) pulled in by
    perl-core/ExtUtils-MakeMaker:0

  (perl-core/Data-Dumper-2.154.0:0/0::gentoo, ebuild scheduled for merge) pulled in by
    perl-core/Data-Dumper:0

  (virtual/perl-Data-Dumper-2.158.0:0/0::gentoo, ebuild scheduled for merge) pulled in by
    virtual/perl-Data-Dumper required by (dev-perl/ExtUtils-Depends-0.404.0:0/0::gentoo, ebuild scheduled for merge)
    >=virtual/perl-Data-Dumper-2.154.0 required by (dev-lang/perl-5.22.0:0/5.22::gentoo, installed)
    =virtual/perl-Data-Dumper-2.158.0 required by (dev-perl/Module-Build-0.421.400:0/0::gentoo, ebuild scheduled for merge)
    =virtual/perl-Data-Dumper-2.158.0 required by (dev-perl/Module-Build-0.420.500:0/0::gentoo, installed)
    virtual/perl-Data-Dumper required by (dev-perl/Module-Build-0.421.400:0/0::gentoo, ebuild scheduled for merge)
    =virtual/perl-Data-Dumper-2.158.0 required by (dev-lang/perl-5.22.0:0/5.22::gentoo, installed)
    virtual/perl-Data-Dumper:0
    virtual/perl-Data-Dumper required by (dev-perl/Module-Build-0.420.500:0/0::gentoo, installed)


For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#Blocked_packages

 * perl-cleaner is stopping here:
 * Fix the problem and start perl-cleaner again.
 * 
 * 
 * Note that upgrading Perl with emerge option --ignore-built-slot-operator-deps=y is not supported.

Code: Select all

emerge -avuD @system --with-bdeps=y

 * IMPORTANT: 3 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.


These are the packages that would be merged, in order:

Calculating dependencies                                                                                          [ ok ]                                                                                                                           ... done!
[ebuild     U  ] dev-libs/expat-2.1.0-r5::gentoo [2.1.0-r4::gentoo] USE="unicode -examples -static-libs" ABI_X86="32 (64) (-x32)" 550 KiB
[ebuild     U  ] sys-libs/timezone-data-2015f::gentoo [2015e::gentoo] USE="nls -leaps_timezone" 469 KiB
[ebuild     U  ] dev-libs/lzo-2.09:2::gentoo [2.08-r1:2::gentoo] USE="-examples -static-libs" ABI_X86="32 (64) (-x32)" 581 KiB
[ebuild     U  ] sys-devel/binutils-config-4-r4::gentoo [4-r3::gentoo] 0 KiB
[ebuild     U  ] dev-libs/mpfr-3.1.3_p4::gentoo [3.1.3::gentoo] USE="-static-libs" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] sys-apps/debianutils-4.5.1::gentoo [4.4::gentoo] USE="-static" 148 KiB
[ebuild  r  U  ] net-firewall/iptables-1.4.21-r3:0/10::gentoo [1.4.21-r1:0/0::gentoo] USE="ipv6 -conntrack% -netlink -pcap% -static-libs" 535 KiB
[ebuild     U  ] dev-libs/libpcre-8.37-r2:3::gentoo [8.37-r1:3::gentoo] USE="bzip2 cxx jit pcre16 readline recursion-limit (unicode) zlib -libedit -pcre32 -static-libs" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] sys-devel/bc-1.06.95-r2::gentoo [1.06.95-r1::gentoo] USE="readline -libedit -static" 0 KiB
[ebuild     U  ] x11-proto/xproto-7.0.28::gentoo [7.0.27::gentoo] USE="-doc" ABI_X86="32 (64) (-x32)" 294 KiB
[ebuild     U  ] x11-proto/kbproto-1.0.7::gentoo [1.0.6-r1::gentoo] ABI_X86="32 (64) (-x32)" 245 KiB
[ebuild     U  ] x11-proto/randrproto-1.5.0::gentoo [1.4.1::gentoo] ABI_X86="32 (64) (-x32)" 139 KiB
[ebuild     U  ] dev-libs/nettle-3.1.1:0/6::gentoo [2.7.1-r4:0/4::gentoo] USE="gmp -doc (-neon) -static-libs {-test}" ABI_X86="32 (64) (-x32)" CPU_FLAGS_X86="-aes%" 1,809 KiB
[ebuild     U  ] x11-libs/libfontenc-1.1.3::gentoo [1.1.2::gentoo] USE="-static-libs" 295 KiB
[ebuild     U  ] x11-libs/libXrandr-1.5.0::gentoo [1.4.2::gentoo] USE="-static-libs" ABI_X86="32 (64) (-x32)" 308 KiB
[ebuild     U  ] app-misc/pax-utils-1.1.1::gentoo [1.0.3::gentoo] USE="python seccomp%* -caps -debug%" 613 KiB
[ebuild     U  ] virtual/perl-Text-ParseWords-3.300.0::gentoo [3.290.0-r1::gentoo] 0 KiB
[ebuild     U  ] virtual/perl-Test-Harness-3.350.0::gentoo [3.330.0::gentoo] 0 KiB
[ebuild     U  ] virtual/perl-Perl-OSType-1.8.0::gentoo [1.7.0::gentoo] 0 KiB
[ebuild     U  ] virtual/perl-Module-Metadata-1.0.26::gentoo [1.0.19::gentoo] 0 KiB
[ebuild     U  ] virtual/perl-JSON-PP-2.273.0::gentoo [2.272.30::gentoo] 0 KiB
[ebuild   R    ] x11-proto/xcb-proto-1.11::gentoo  ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python2_7 python3_3 python3_4*" 0 KiB
[ebuild     U  ] dev-python/packaging-15.3-r1::gentoo [15.3::gentoo] USE="{-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4* -pypy -pypy3" 0 KiB
[ebuild     U  ] dev-python/setuptools-18.2-r3::gentoo [18.2-r2::gentoo] USE="{-test}" PYTHON_TARGETS="python2_7 python3_3 python3_4 -pypy -pypy3" 0 KiB
[ebuild     U  ] sys-apps/portage-2.2.20.1::gentoo [2.2.20::gentoo] USE="(ipc) -build -doc -epydoc (-selinux) -xattr" LINGUAS="-ru" PYTHON_TARGETS="python3_3 python3_4* -pypy -python2_7" 0 KiB
[ebuild     U  ] app-eselect/eselect-java-0.1.0-r1::gentoo [0.1.0::gentoo] 15 KiB
[ebuild     U  ] sys-libs/cracklib-2.9.6::gentoo [2.9.4::gentoo] USE="nls python zlib -static-libs {-test}" ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="-python2_7*" 628 KiB
[ebuild     U  ] sys-libs/libcap-2.24-r2::gentoo [2.24-r1::gentoo] USE="pam -static-libs" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] media-libs/tiff-4.0.5::gentoo [4.0.3-r6::gentoo] USE="cxx jpeg zlib -jbig -lzma -static-libs {-test}" ABI_X86="32 (64) (-x32)" 2,086 KiB
[ebuild     U  ] dev-tcltk/blt-2.4z-r13::gentoo [2.4z-r12::gentoo] USE="X jpeg -static-libs" 0 KiB
[ebuild     U  ] x11-libs/libXt-1.1.5::gentoo [1.1.4::gentoo] USE="-static-libs" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] x11-libs/libXaw-1.0.13::gentoo [1.0.12::gentoo] USE="-deprecated -doc -static-libs" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] virtual/libusb-1-r2:1::gentoo [1-r1:1::gentoo] USE="udev" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild  N F   ] dev-java/oracle-jdk-bin-1.8.0.60:1.8::gentoo  USE="alsa awt cups fontconfig nsplugin -derby -doc -examples -javafx -jce -pax_kernel (-selinux) -source" 176,991 KiB
[ebuild  NS    ] virtual/jdk-1.8.0:1.8::gentoo [1.7.0:1.7::gentoo] 0 KiB
[ebuild  NS    ] virtual/jre-1.8.0:1.8::gentoo [1.7.0:1.7::gentoo] 0 KiB
[ebuild     U  ] sys-devel/gettext-0.19.5.1-r1::gentoo [0.19.4::gentoo] USE="acl cxx java ncurses nls openmp -cvs -doc -emacs -git -static-libs" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] sys-libs/db-6.0.35:6.0::gentoo [6.0.30-r1:6.0::gentoo] USE="cxx java -doc -examples -tcl {-test}" ABI_X86="32 (64) (-x32)" 35,677 KiB
[ebuild     U  ] media-libs/libjpeg-turbo-1.4.1::gentoo [1.4.0::gentoo] USE="java static-libs" ABI_X86="32 (64) (-x32)" 1,494 KiB
[ebuild     UD ] dev-lang/perl-5.20.2-r1:0/5.20::gentoo [5.22.0:0/5.22::gentoo] USE="berkdb gdbm -debug -doc -ithreads" 0 KiB
[ebuild     U  ] sys-libs/pam-1.2.1-r1::gentoo [1.2.0::gentoo] USE="berkdb cracklib filecaps%* nls pie -audit -debug -nis (-selinux) {-test} -vim-syntax" ABI_X86="32 (64) (-x32)" 1,250 KiB
[ebuild     U  ] net-dns/libidn-1.32::gentoo [1.30::gentoo] USE="java nls -doc -emacs -mono -static-libs" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild  rR    ] sys-apps/iproute2-4.1.1::gentoo  USE="berkdb iptables ipv6 -atm -minimal (-selinux)" 0 KiB
[ebuild     U  ] dev-libs/openssl-1.0.2d::gentoo [1.0.2c::gentoo] USE="asm tls-heartbeat zlib -bindist -gmp -kerberos -rfc3779 -sctp -static-libs {-test} -vanilla" ABI_X86="32 (64) (-x32)" CPU_FLAGS_X86="(sse2)" 5,172 KiB
[ebuild  rR    ] sys-apps/util-linux-2.26.2::gentoo  USE="cramfs ncurses nls pam python suid tty-helpers udev unicode -caps -fdformat (-selinux) -slang -static-libs -systemd {-test}" ABI_X86="32 (64) (-x32)" PYTHON_SINGLE_TARGET="python3_4 -python2_7 -python3_3" PYTHON_TARGETS="python3_4 -python2_7 -python3_3" 0 KiB
[ebuild     U  ] sys-apps/hwids-20150717-r1::gentoo [20150421::gentoo] USE="net pci udev usb" 0 KiB
[ebuild     U  ] sys-devel/llvm-3.6.2:0/3.6::gentoo [3.6.1:0/3.6::gentoo] USE="libffi ncurses python static-analyzer xml -clang -debug -doc -gold -libedit -multitarget -ocaml {-test}" ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python2_7 -pypy" VIDEO_CARDS="-radeon" 0 KiB
[ebuild     U  ] net-libs/gnutls-3.3.17.1::gentoo [3.3.15-r1::gentoo] USE="crywrap cxx nls openssl zlib -dane -doc -examples -guile -pkcs11 -static-libs {-test}" ABI_X86="32 (64) (-x32)" LINGUAS="en uk -cs -de -fi -fr -it -ms -nl -pl -sv -vi -zh_CN" 6,192 KiB
[ebuild     U  ] x11-libs/gdk-pixbuf-2.30.8-r1:2::gentoo [2.30.8:2::gentoo] USE="X introspection jpeg tiff -debug -jpeg2k {-test}" ABI_X86="32 (64) (-x32)" 1,306 KiB
[ebuild     U  ] dev-libs/atk-2.16.0-r1::gentoo [2.16.0::gentoo] USE="introspection nls {-test}" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] media-libs/mesa-11.0.0_rc2::gentoo [10.5.6::gentoo] USE="classic dri3 egl gallium gbm llvm nptl udev -bindist -d3d9 -debug -gles1 -gles2 -opencl -openmax -osmesa -pax_kernel -pic (-selinux) -vaapi -vdpau -wayland -xa -xvmc" ABI_X86="32 (64) (-x32)" VIDEO_CARDS="(-freedreno) -i915 -i965 -ilo -intel -nouveau -r100 -r200 -r300 -r600 -radeon -radeonsi -vmware" 7,082 KiB
[ebuild     U  ] media-libs/harfbuzz-0.9.41:0/0.9.18::gentoo [0.9.40:0/0.9.18::gentoo] USE="cairo glib graphite icu introspection truetype -fontconfig% -static-libs {-test}" ABI_X86="32 (64) (-x32)" 1,161 KiB
[ebuild     U  ] dev-util/intltool-0.51.0::gentoo [0.50.2-r1::gentoo] 0 KiB
[ebuild     U  ] sys-apps/texinfo-6.0::gentoo [5.2::gentoo] USE="nls -static" 3,991 KiB
[ebuild     U  ] net-misc/openssh-7.1_p1::gentoo [6.8_p1-r5::gentoo] USE="X hpn pam pie ssl -X509 -bindist -debug -kerberos -ldap -ldns -libedit -sctp (-selinux) -skey -ssh1* -static" 0 KiB
[ebuild     U  ] dev-util/gtk-update-icon-cache-3.16.4::gentoo [3.16.3::gentoo] 310 KiB
[ebuild     U  ] dev-util/cmake-3.3.1-r1::gentoo [3.2.3::gentoo] USE="ncurses qt4 -doc -emacs -qt5 -system-jsoncpp {-test}" 6,426 KiB
[ebuild  NS    ] dev-lang/spidermonkey-1.8.5-r4:0/mozjs185::gentoo [17.0.0-r3:17::gentoo, 24.2.0-r2:24::gentoo] USE="-debug -minimal -static-libs {-test}" 6,021 KiB
[ebuild     U  ] sys-auth/polkit-0.113::gentoo [0.112-r3::gentoo] USE="gtk introspection nls pam -examples -jit -kde (-selinux) -systemd {-test%}" 1,415 KiB
[ebuild     U  ] sys-apps/dbus-1.8.20::gentoo [1.8.16::gentoo] USE="X -debug -doc (-selinux) -static-libs -systemd {-test}" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] x11-misc/xdg-utils-1.1.0_rc3_p20150825::gentoo [1.1.0_rc3_p20150119::gentoo] USE="perl -doc" 257 KiB
[ebuild     U  ] net-print/cups-2.0.4::gentoo [2.0.2-r1::gentoo] USE="X acl dbus java pam python ssl threads usb -debug -kerberos -lprng-compat (-selinux) -static-libs -systemd -xinetd -zeroconf" ABI_X86="32 (64) (-x32)" LINGUAS="-ca -cs -de -es -fr -it -ja -pt_BR -ru" PYTHON_TARGETS="python2_7" 8,594 KiB
[ebuild     U  ] dev-libs/dbus-glib-0.104::gentoo [0.102::gentoo] USE="-debug -static-libs {-test} (-doc%)" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] x11-libs/gtk+-3.16.5:3::gentoo [3.16.3:3::gentoo] USE="X cups introspection (-aqua) -broadway -cloudprint -colord -debug -examples {-test} -vim-syntax -wayland -xinerama" ABI_X86="32 (64) (-x32)" 0 KiB

Total: 64 packages (56 upgrades, 1 downgrade, 1 new, 3 in new slots, 3 reinstalls), Size of downloads: 272,039 KiB
Fetch Restriction: 1 package (1 unsatisfied)

Fetch instructions for dev-java/oracle-jdk-bin-1.8.0.60:
 * 
 * Oracle requires you to download the needed files manually after
 * accepting their license through a javascript capable web browser.
 * 
 * Download the following files:
 *   jdk-8u60-linux-x64.tar.gz
 * at 'http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html'
 * and move them to '/usr/portage/distfiles'
 * 
 * If the above mentioned urls do not point to the correct version anymore,
 * please download the files from Oracle's java download archive:
 * 
 *    http://www.oracle.com/technetwork/java/javase/downloads/java-archive-javase8-2177648.html#jdk-8u60-oth-JPR
 * 

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-lang/perl:0

  (dev-lang/perl-5.22.0:0/5.22::gentoo, installed) pulled in by
    =dev-lang/perl-5.22* required by (virtual/perl-Carp-1.360.0:0/0::gentoo, installed)
    ^              ^^^^^                                                                                                                      
    dev-lang/perl:0/5.22=[-build(-)] required by (dev-perl/extutils-pkgconfig-1.150.0:0/0::gentoo, installed)
                 ^^^^^^^^                                                                                                                        
    (and 29 more with the same problems)

  (dev-lang/perl-5.20.2-r1:0/5.20::gentoo, ebuild scheduled for merge) pulled in by
    =dev-lang/perl-5.20* required by (virtual/perl-Test-Simple-1.1.2:0/0::gentoo, installed)
    ^              ^^^^^                                                                                                                           
    dev-lang/perl:0/5.20=[-build(-)] required by (dev-perl/libintl-perl-1.240.0:0/0::gentoo, installed)
                 ^^^^^^^^                                                                                                                  
    (and 74 more with the same problems)


It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously.  If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously. You may want to try a larger value of
the --backtrack option, such as --backtrack=30, in order to see if
that will solve this conflict automatically.

For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.

Time for an emerge -C dev-perl/* and attempt a reconstruction w.r.t. broken packages


--edit--
obmenu-generator and xrvt-unicode are now working ... what can be done to streamline perl's upgrade...