[overlay] unity-gentoo

Message

shiznix · Post by **shiznix** » Wed Nov 27, 2013 5:26 pm

Bluemerlin wrote:I'm having an issue with emerging unity-meta in that nux requires <media-libs/glew-1.8 however 1.9 is in stable portage and the overlay.
Code: Select all
emerge: there are no ebuilds to satisfy "<media-libs/glew-1.8".
(dependency required by "unity-base/nux-4.0.3_p0_p01::unity-gentoo" [ebuild])
(dependency required by "unity-base/unity-7.1.2_p0_p01-r3::unity-gentoo" [ebuild])
(dependency required by "unity-base/unity-meta-7.1.2::unity-gentoo" [ebuild])
(dependency required by "unity-meta" [argument])
What should I do?

Sync up, this should be fixed now.

denysonique · Post by **denysonique** » Wed Dec 11, 2013 8:10 am

Code: Select all

Total: 310 packages (17 upgrades, 12 downgrades, 228 new, 36 in new slots, 17 reinstalls), Size of downloads: 690,807 kB
Conflict: 5 blocks (3 unsatisfied)

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-libs/glib:2

  (dev-libs/glib-2.38.1_p0_p01-r1::unity-gentoo, ebuild scheduled for merge) pulled in by
    >=dev-libs/glib-2.36:2[utils] required by (x11-libs/gtk+-3.8.6_p0_p03::unity-gentoo, ebuild scheduled for merge)
    >=dev-libs/glib-2.38.1:2 required by (dev-util/gdbus-codegen-2.38.1::unity-gentoo, ebuild scheduled for merge)
    (and 4 more with the same problems)

  (dev-libs/glib-2.36.4-r1::gentoo, installed) pulled in by
    >=dev-libs/glib-2.22:2/2= required by (sys-auth/consolekit-0.4.6::gentoo, installed)

sys-devel/gettext:0

  (sys-devel/gettext-0.18.2::gentoo, ebuild scheduled for merge) pulled in by
    <sys-devel/gettext-0.18.3 required by (unity-base/gnome-control-center-unity-1.3_p0_p01-r1::unity-gentoo, ebuild scheduled for merge)

  (sys-devel/gettext-0.18.3.1-r1::gentoo, installed) pulled in by
    >=sys-devel/gettext-0.18.3:0 required by (media-video/vlc-2.1.1::gentoo, installed)

dev-libs/boost:0

  (dev-libs/boost-1.53.0::gentoo, installed) pulled in by
    >=dev-libs/boost-1.35.0-r5:0/1.53= required by (kde-base/kdepimlibs-4.11.4::gentoo, installed)
    dev-libs/boost:0/1.53= required by (kde-base/kdepim-runtime-4.11.4::gentoo, installed)
    dev-libs/boost:0/1.53= required by (app-office/akonadi-server-1.10.3::gentoo, installed)

  (dev-libs/boost-1.52.0-r6::gentoo, ebuild scheduled for merge) pulled in by
    dev-libs/boost:0/1.52 required by (unity-base/compiz-0.9.10_p0_p01-r7::unity-gentoo, ebuild scheduled for merge)

x11-base/xorg-server:0

  (x11-base/xorg-server-1.14.3_p3_p02::unity-gentoo, ebuild scheduled for merge) pulled in by
    x11-base/xorg-server[dmx] required by (unity-base/frame-2.5.0a_p0_p01::unity-gentoo, ebuild scheduled for merge)
    x11-base/xorg-server[dmx] required by (unity-base/unity-7.1.2_p0_p01-r4::unity-gentoo, ebuild scheduled for merge)
    x11-base/xorg-server[dmx] required by (unity-base/compiz-0.9.10_p0_p01-r7::unity-gentoo, ebuild scheduled for merge)

  (x11-base/xorg-server-1.14.99.903-r1::gentoo, installed) pulled in by
    x11-base/xorg-server:0/1.14.99.903= required by (x11-drivers/xf86-input-keyboard-1.7.0::gentoo, installed)
    x11-base/xorg-server:0/1.14.99.903= required by (x11-drivers/xf86-video-modesetting-0.8.1::gentoo, installed)
    x11-base/xorg-server:0/1.14.99.903= required by (x11-drivers/xf86-input-evdev-2.8.2::gentoo, installed)
    x11-base/xorg-server:0/1.14.99.903= required by (x11-drivers/xf86-video-vesa-2.3.3::gentoo, installed)
    x11-base/xorg-server:0/1.14.99.903= required by (x11-drivers/xf86-input-mouse-1.9.0::gentoo, installed)


It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously.  If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously. You may want to try a larger value of
the --backtrack option, such as --backtrack=30, in order to see if
that will solve this conflict automatically.

For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.


 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (media-libs/libpostproc-0.8.0.20121125::gentoo, installed) pulled in by
    media-libs/libpostproc required by @selected

  (media-video/ffmpeg-1.2.4::gentoo, ebuild scheduled for merge) pulled in by
    >=media-video/ffmpeg-1.0:0[X?,encode?,gsm?,jpeg2k?,mp3?,opus?,sdl?,speex?,theora?,threads?,truetype?,vaapi?,vdpau?,x264?] (>=media-video/ffmpeg-1.0:0[X,encode,mp3,sdl,threads,truetype,vaapi,x264]) required by (virtual/ffmpeg-9::gentoo, ebuild scheduled for merge)
    media-video/ffmpeg:0 required by (media-plugins/gst-plugins-ffmpeg-0.10.13_p201211-r1::gentoo, installed)
    >=media-video/ffmpeg-1.2:0= required by (media-video/vlc-2.1.1::gentoo, installed)

  (media-video/libav-0.8.6::dennis, installed) pulled in by
    media-video/libav required by @selected


For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked


The following mask changes are necessary to proceed:
 (see "package.unmask" in the portage(5) man page for more details)
# required by media-video/kdenlive-0.9.6
# required by @selected
# required by @world (argument)
# /etc/portage/package.mask/gentoo.pmask:
# only libav-0.8.6 can record my desktop with sound
=virtual/ffmpeg-9

NOTE: The --autounmask-keep-masks option will prevent emerge
      from creating package.unmask or ** keyword changes.

I am running ~amd64.

I think that /var/lib/layman/unity-gentoo/unity-portage.pmask should be updated to solve most of the problems, such as the Xorg stuff.

denysonique · Post by **denysonique** » Wed Dec 11, 2013 9:31 am

Uninstalling the conflicting x11-drivers/* helped.

Any idea why Portage didn't resolve that automatically, by simply resinstalling them?

shiznix · Post by **shiznix** » Thu Dec 12, 2013 2:40 am

denysonique wrote:Uninstalling the conflicting x11-drivers/* helped.

Any idea why Portage didn't resolve that automatically, by simply resinstalling them?

Not sure. Did you try the '--backtrack' option ?
Gettext and boost version limits have been resolved by upstream and fixed in overlay.

Thanks!

noclear2000 · Post by **noclear2000** » Thu Jan 02, 2014 1:16 pm

Hi

I have problem when updating:

Code: Select all


 * Succeeded:
 * ------
 * Successfully synchronized overlay "java".
 * Successfully synchronized overlay "owncloud-client".
 * Successfully synchronized overlay "qt".
 * Successfully synchronized overlay "steam".
 * Successfully synchronized overlay "sunrise".
 * Successfully synchronized overlay "unity-gentoo".
 * 

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild     U ~] app-admin/eselect-lightdm-0.2 [0.1]
[ebuild     UD~] dev-libs/libindicator-12.10.2_p0_p02 [12.10.2a_p0_p02]
[ebuild     U ~] dev-libs/check-0.9.11 [0.9.10] ABI_X86="(64%*) -32% (-x32)" 
[ebuild     UD~] dev-libs/libappindicator-12.10.1_p0_p02 [12.10.1a_p0_p02]
[ebuild     U ~] net-im/telepathy-mission-control-5.16.0_p1_p06 [5.16.0_p1_p05]
[ebuild     U ~] gnome-base/gnome-desktop-3.8.4_p0_p0101 [3.8.4_p0_p01]
[ebuild     U ~] x11-misc/lightdm-1.8.4_p0_p01 [1.8.2_p0_p01]
[ebuild     U  ] mail-client/thunderbird-24.2.0_p0_p0013101-r1 [24.2.0_p0_p0013101]
[ebuild     U ~] gnome-base/nautilus-3.8.2_p0_p0201 [3.8.2_p0_p02]
[ebuild     U ~] app-emulation/wine-1.7.9 [1.7.4] USE="-netapi%" 
[ebuild     U  ] gnome-base/gnome-shell-3.8.4-r2 [3.8.4-r1]

Would you like to merge these packages? [Yes/No] yes

>>> Verifying ebuild manifests

!!! A file listed in the Manifest could not be found: /var/lib/layman/unity-gentoo/x11-misc/lightdm/lightdm-1.8.2_p0_p01.ebuild
!!! A file is not listed in the Manifest: '/var/lib/layman/unity-gentoo/mail-client/thunderbird/files/icon/thunderbird.desktop_sav'

What can I do? Probably a problem on overlys's side or is it "my fault"?

Thanks!

renegart · Post by **renegart** » Thu Jan 02, 2014 2:57 pm

The issue is already fixed, please make an update of the overlay

noclear2000 · Post by **noclear2000** » Thu Jan 02, 2014 4:26 pm

hi renegart,

thanks a lo!

yes for lightdm, no for thunderbird:

Code: Select all

>>> Verifying ebuild manifests
!!! A file is not listed in the Manifest: '/var/lib/layman/unity-gentoo/mail-client/thunderbird/files/icon/thunderbird.desktop_sav'

renegart · Post by **renegart** » Thu Jan 02, 2014 4:32 pm

noclear2000 wrote:hi renegart,

thanks a lo!

yes for lightdm, no for thunderbird:
Code: Select all
>>> Verifying ebuild manifests
!!! A file is not listed in the Manifest: '/var/lib/layman/unity-gentoo/mail-client/thunderbird/files/icon/thunderbird.desktop_sav'

shiznix has pushed the commit (632e3eea5b) yesterday. please remove the file manually on your side.

noclear2000 · Post by **noclear2000** » Tue Apr 22, 2014 5:38 pm

hi

after a long time of no updates (due to lots of blockers and no time) i finally tried a deep world update. So I am on my way towards trusty (coming from saucy).

>400 packages to compile. Had lots of issues on the way but was able to resolve most of them. For the last ~100 packages I am currently stuck at compilatoin of "dev-qt/qt3d-5.0_p0_p05":

Code: Select all

t/qt3d-5.0_p0_p05/work/3rdparty/assimp/code -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/3rdparty/assimp/code/BoostWorkaround -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/3rdparty/assimp/include -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/3rdparty/assimp/include/Compiler -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/3rdparty/assimp/contrib/ConvertUTF -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/3rdparty/assimp/contrib/irrXML -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/3rdparty/assimp/contrib/unzip -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/scene_bezier -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/network -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/graphicsview -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/textures -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/surfaces -I/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/api -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui/5.3.0 -isystem /usr/include/qt5/QtGui/5.3.0/QtGui -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore/5.3.0 -isystem /usr/include/qt5/QtCore/5.3.0/QtCore -isystem /usr/include/qt5/QtCore -isystem /usr/include/qt5/QtNetwork -I.moc -I. -o .obj/qglpainter.o /var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/painting/qglpainter.cpp
/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/painting/qglpainter.cpp: In member function 'int QGLPainter::pickObject(int, int) const':
/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/src/threed/painting/qglpainter.cpp:2348:61: error: passing 'const QGLPainter' as 'this' argument of 'void QOpenGLFunctions::glReadPixels(GLint, GLint, GLsizei, GLsizei, GLenum, GLenum, GLvoid*)' discards qualifiers [-fpermissive]
     glReadPixels(x, y, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, data);
                                                             ^
make[2]: *** [.obj/qglpainter.o] Error 1
make[2]: Leaving directory `/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/qt3d-opensource-src-5.0_p0_p05/src/threed'
make[1]: *** [sub-threed-make_first-ordered] Error 2
make[1]: Leaving directory `/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/qt3d-opensource-src-5.0_p0_p05/src'
make: *** [sub-src-make_first] Error 2
 * ERROR: dev-qt/qt3d-5.0_p0_p05::unity-gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=dev-qt/qt3d-5.0_p0_p05::unity-gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-qt/qt3d-5.0_p0_p05::unity-gentoo'`.
 * The complete build log is located at '/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work/qt3d-opensource-src-5.0_p0_p05'
 * S: '/var/tmp/portage/dev-qt/qt3d-5.0_p0_p05/work'

>>> Failed to emerge dev-qt/qt3d-5.0_p0_p05, Log file:

Code: Select all

root@zenbook [~]# emerge --info '=dev-qt/qt3d-5.0_p0_p05::unity-gentoo'
Portage 2.2.10 (default/linux/amd64/13.0, gcc-4.8.2, glibc-2.17, 3.13.1-gentoo x86_64)
=================================================================
                         System Settings
=================================================================
System uname: Linux-3.13.1-gentoo-x86_64-Intel-R-_Core-TM-_i7-3517U_CPU_@_1.90GHz-with-gentoo-2.2
KiB Mem:     3485292 total,   1046480 free
KiB Swap:    4194300 total,   4120676 free
Timestamp of tree: Mon, 21 Apr 2014 10:00:01 +0000
ld GNU ld (GNU Binutils) 2.23.2
app-shells/bash:          4.2_p45
dev-java/java-config:     2.2.0
dev-lang/python:          2.7.5-r3, 3.3.3, 3.4.0
dev-util/cmake:           2.8.12.2
dev-util/pkgconfig:       0.28
sys-apps/baselayout:      2.2
sys-apps/openrc:          0.12.4
sys-apps/sandbox:         2.6-r1
sys-devel/autoconf:       2.13, 2.69
sys-devel/automake:       1.10.3, 1.11.6, 1.12.6, 1.13.4
sys-devel/binutils:       2.23.2
sys-devel/gcc:            4.8.2
sys-devel/gcc-config:     1.7.3
sys-devel/libtool:        2.4.2
sys-devel/make:           3.82-r4
sys-kernel/linux-headers: 3.9 (virtual/os-headers)
sys-libs/glibc:           2.17
Repositories: gentoo Lokal PlexOverlay sunrise steam-overlay java owncloud-client qt ROKO__ unity-gentoo
Installed sets: @steam
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="${EPREFIX}/etc/gconf /etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="de_DE"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage /usr/local/portage/PlexOverlay-master /var/lib/layman/sunrise /var/lib/layman/steam /var/lib/layman/java /var/lib/layman/owncloud-client /var/lib/layman/qt /var/lib/layman/ROKO__ /var/lib/layman/unity-gentoo"
USE="X a52 aac acl acpi acpid aio alsa amd64 autoipd avahi bacula-nodir berkdb bluetooth bonjour branding bzip2 cairo cd cdda cdr cleartype cli colord corefonts cracklib crypt cups cupsd curl cxx dbus ddate directfb dmx dri drm dts dvd dvdr eds egl emboss emotion encode evo exif fam fat fbcon fbcondecor firefox flac fontconfig fortran g3dvl gbm gd gdbm gif gimp git glade gnome gnome-keyring gnome-online-accounts gpm gstreamer gtk gtk3 hpcups hpn iconv icu idn introspection ipv6 java jce jpeg kvm laptop lcms libdrm libnotify libsecret lm_sensors lock logrotate mad mdnsresponder-compat mmx mng modules mp3 mp4 mpeg msn multilib mysql nautilus ncurses netlink network-cron networkmanager nls notebook nptl nsplugin ntp ogg opengl openmp opevn pam pango pcre pdf png policykit ppds pulseaudio qt3support raw readline samba sdl session sipim smp sna socialweb spell sse sse2 sse4_1 ssl ssse3 startup-notification subversion svg svn systemd tcpd threads thunar tiff timezone tools truetype udev udisks unicode upower urandom usb usb3 utilities v4l vaapi vala vdpau vim-syntax vorbis wifi wxwidgets x264 xcb xcomposite xine xinerama xml xprint xrandr xscreensaver xv xvid xvmc zeitgeist zeroconf zip zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev mouse keyboard synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LIGHTDM_GREETERS="unity" LINGUAS="de en" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, MAKEOPTS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, SYNC, USE_PYTHON

Any hints? Can s/o confirm success of compilation? Thanks a lot in advance!

EDIT:
Just in case s/o is having the the same problem(s) here is what it solved for me.
After doing the qt5 downgrade to the unity-overlay qt versoins qt3d and qtgui that failed to compile before did work out. (see very first post of this thread)

Only the upgrade from unity-base/signon-ui-0.15_p0_p01-r4 to unity-base/signon-ui-0.16_p0_p01-r2 keeps on failing

EDIT2: After a re-emerge of x11-libs/libaccounts-qt-1.11_p0_p01-r1 this also worked out.

kranaos · Post by **kranaos** » Sat May 17, 2014 9:33 am

Hi,

I'm having this error when I try to unlock in Time and Date settings panel:

Code: Select all

(unity-control-center:11620): Gtk-WARNING **: Error acquiring permission: Failed to acquire permission for action-id com.canonical.controlcenter.datetime.configure

The same issue appears in User Account Settings:

Code: Select all

(unity-control-center:11620): Gtk-WARNING **: Error acquiring permission: Failed to acquire permission for action-id com.canonical.controlcenter.user-accounts.administration

In dconf I have no schemas named controlcenter under com.cannonical.

Anyone having this ?

Sorry for my bad english
Best
Sylvain

shiznix · Post by **shiznix** » Sun May 18, 2014 10:37 am

kranaos wrote:Hi,

I'm having this error when I try to unlock in Time and Date settings panel:
Code: Select all
(unity-control-center:11620): Gtk-WARNING **: Error acquiring permission: Failed to acquire permission for action-id com.canonical.controlcenter.datetime.configure
The same issue appears in User Account Settings:
Code: Select all
(unity-control-center:11620): Gtk-WARNING **: Error acquiring permission: Failed to acquire permission for action-id com.canonical.controlcenter.user-accounts.administration
In dconf I have no schemas named controlcenter under com.cannonical.

Anyone having this ?

Hi kranaos,

These error lines are referring to polkit policies.
Ensure 'polkitd' and 'polkit-gnome-authentication-agent-1' processes are running.

When you click on 'Unlock' it should prompt for the root password to unlock admin privileges and be able to change that setting.

kranaos · Post by **kranaos** » Sun May 18, 2014 11:54 am

hi shiznix,

yes, polkitd and 'polkit-gnome-authentication-agent-1' processes are running.

When I click on 'Unlock, the root prompt disappear immediately after 1 second .The same issue occurs when I try to mount a drive in nautilus.

shiznix · Post by **shiznix** » Mon May 19, 2014 9:20 am

kranaos wrote:hi shiznix,

yes, polkitd and 'polkit-gnome-authentication-agent-1' processes are running.

When I click on 'Unlock, the root prompt disappear immediately after 1 second .The same issue occurs when I try to mount a drive in nautilus.

I wasn't able to initially reproduce this, but some Googling mentioned others with the same problem when /usr/lib/polkit-1/polkit-agent-helper-1 has not been setuid.
Was then able to reproduce by setting 'chmod -s /usr/lib/polkit-1/polkit-agent-helper-1', so you may just need to do 'chmod +s /usr/lib/polkit-1/polkit-agent-helper-1' as root.

If this does fix the problem, then it becomes a mystery how this would have been unset as this is set at installation of sys-auth/polkit.
You might also wish to re-emerge sys-auth/polkit as a catchall.

Hope that helps

kranaos · Post by **kranaos** » Mon May 19, 2014 7:37 pm

shiznix wrote:
kranaos wrote:hi shiznix,

yes, polkitd and 'polkit-gnome-authentication-agent-1' processes are running.

When I click on 'Unlock, the root prompt disappear immediately after 1 second .The same issue occurs when I try to mount a drive in nautilus.
I wasn't able to initially reproduce this, but some Googling mentioned others with the same problem when /usr/lib/polkit-1/polkit-agent-helper-1 has not been setuid.
Was then able to reproduce by setting 'chmod -s /usr/lib/polkit-1/polkit-agent-helper-1', so you may just need to do 'chmod +s /usr/lib/polkit-1/polkit-agent-helper-1' as root.

If this does fix the problem, then it becomes a mystery how this would have been unset as this is set at installation of sys-auth/polkit.
You might also wish to re-emerge sys-auth/polkit as a catchall.

Hope that helps

Setting the SUID fix the problem.

I've made some chown -R root:root to fix incorrect rights due to a backup restore just before switching to Unity

Thanks for your Help shiznix and your great work on Unity overlay

Best,
Sylvain

noclear2000 · Post by **noclear2000** » Mon Jun 16, 2014 9:11 am

hi again,

Install phase of

Code: Select all

=unity-base/compiz-0.9.11_p0_p01-r6

fails for me with the following error:

Code: Select all

Failed to create file '/usr/share/glib-2.0/schemas/gschemas.compiled.7QN6GX': Permission denied

With some more context:

Code: Select all

-- Set runtime path of "/var/tmp/portage/unity-base/compiz-0.9.11_p0_p01-r6/image//usr/lib64/compiz/libannotate.so" to "/usr/lib64/compiz"
-- Recompiling GSettings schemas in /usr/share/glib-2.0/schemas
warning: Schema 'com.canonical.notify-osd' has path '/apps/notify-osd/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'com.canonical.Unity.ApplicationsLens' has path '/desktop/unity/lenses/applications/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'com.canonical.Unity.Runner' has path '/desktop/unity/runner/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'com.canonical.Unity.FilesLens' has path '/desktop/unity/lenses/files/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'com.canonical.indicator.session' has path '/apps/indicator-session/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.freedesktop.Geoclue' has path '/apps/geoclue/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.freedesktop.Telepathy.Logger' has path '/apps/telepathy-logger/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.freedesktop.ibus' has path '/desktop/ibus/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.freedesktop.ibus.general' has path '/desktop/ibus/general/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.freedesktop.ibus.general.hotkey' has path '/desktop/ibus/general/hotkey/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.freedesktop.ibus.panel' has path '/desktop/ibus/panel/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.crypto.cache' has path '/desktop/gnome/crypto/cache/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.crypto.pgp' has path '/desktop/gnome/crypto/pgp/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.seahorse' has path '/apps/seahorse/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.seahorse.manager' has path '/apps/seahorse/listing/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.system.locale' has path '/system/locale/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.system.proxy' has path '/system/proxy/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.system.proxy.http' has path '/system/proxy/http/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.system.proxy.https' has path '/system/proxy/https/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.system.proxy.ftp' has path '/system/proxy/ftp/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
warning: Schema 'org.gnome.system.proxy.socks' has path '/system/proxy/socks/'.  Paths starting with '/apps/', '/desktop/' or '/system/' are deprecated.
Failed to create file '/usr/share/glib-2.0/schemas/gschemas.compiled.7QN6GX': Permission denied
/var/tmp/portage/unity-base/compiz-0.9.11_p0_p01-r6/work/compiz-0.9.11_p0_p01_build
/var/tmp/portage/unity-base/compiz-0.9.11_p0_p01-r6/work/compiz-0.9.11+14.04.20140423 /var/tmp/portage/unity-base/compiz-0.9.11_p0_p01-r6/work/compiz-0.9.11_p0_p01_build
/var/tmp/portage/unity-base/compiz-0.9.11_p0_p01-r6/work/compiz-0.9.11+14.04.20140423
/var/tmp/portage/unity-base/compiz-0.9.11_p0_p01-r6/temp/environment: line 6524: /usr/bin/update-gconf-defaults: No such file or directory
 * ERROR: unity-base/compiz-0.9.11_p0_p01-r6::unity-gentoo failed (install phase):
 *   (no error message)
 *
 * Call stack:
 *     ebuild.sh, line  93:  Called src_install
 *   environment, line 6524:  Called die
 * The specific snippet of code:
 *       /usr/bin/update-gconf-defaults --source="${D}usr/share/gconf/defaults" --destination="${D}etc/gconf/gconf.xml.unity" || die;
 *

Permission denied? Which user? root I assume...? The folder in question looks good (I temporarily did even set 777 to no avail):

Code: Select all

root@zenbook [~]# ll -d /usr/share/glib-2.0/schemas/ /usr/share/glib-2.0/ /usr/share/ /usr /
drwxr-xr-x  22 root root 4,0K  5. Jan  20:16 /
drwxr-xr-x  18 root root 4,0K 16. Mai  21:17 /usr
drwxr-xr-x 325 root root  12K 16. Mai  21:16 /usr/share/
drwxr-xr-x   4 root root 4,0K 28. Apr  14:35 /usr/share/glib-2.0/
drwxrwxrwx   2 root root  20K 16. Jun  11:02 /usr/share/glib-2.0/schemas/
root@zenbook [~]#

I can touch and delete files inside this directory as root. Does some other user need access? If yes, which/why?

Thanks for any pointers!

Cheers,

shiznix · Post by **shiznix** » Mon Jun 30, 2014 9:35 pm

Hi noclear2000,

You've probably already fixed this by now with a sync as was fixed a couple of weeks ago in https://github.com/shiznix/unity-gentoo ... 527dc8b9e9
But for reference, the failure is '/usr/bin/update-gconf-defaults: No such file or directory'

The glib schemas 'Permission denied' is normal and non-fatal.

jetboo · Post by **jetboo** » Tue Jul 08, 2014 2:17 pm

Hello there !

I am struggling to emerge unity from the overlay. Until here i always used minimalistic WM like awesome window manager, i want to give my old laptop to a old person who's used to unity.
What I did so far is to switch to the correct profile (i guess)

Code: Select all

 eselect profile list
Available profile symlink targets:
  [1]   default/linux/amd64/13.0
  [2]   default/linux/amd64/13.0/selinux
  [3]   default/linux/amd64/13.0/desktop
  [4]   default/linux/amd64/13.0/desktop/gnome
  [5]   default/linux/amd64/13.0/desktop/gnome/systemd
  [6]   default/linux/amd64/13.0/desktop/kde
  [7]   default/linux/amd64/13.0/desktop/kde/systemd
  [8]   default/linux/amd64/13.0/developer
  [9]   default/linux/amd64/13.0/no-multilib
  [10]  default/linux/amd64/13.0/x32
  [11]  hardened/linux/amd64
  [12]  hardened/linux/amd64/selinux
  [13]  hardened/linux/amd64/no-multilib
  [14]  hardened/linux/amd64/no-multilib/selinux
  [15]  hardened/linux/amd64/x32
  [16]  hardened/linux/uclibc/amd64
  [17]  hardened/linux/musl/amd64
  [18]  unity-gentoo:saucy/amd64 *
  [19]  unity-gentoo:trusty/amd64
  [20]  unity-gentoo:utopic/amd64

and

Code: Select all

emerge unity-build-env:0/saucy

Now when trying to

Code: Select all

 emerge unity-meta

i got a huge list of block that can be seen here : http://pastebin.com/zc4eT1WQ

Some packages are masked by the overlay itself (like gnome-3.10) so I don’t know if i have to unmask those manually ...

Any advices to how to tackle that list ??

jetboo · Post by **jetboo** » Tue Jul 08, 2014 4:23 pm

Fixed thx to shiznix on irc

Here are the steps if someone is in the same case
re-sync the overlay as Saucy has just been dropped and Trusty stabilised

Code: Select all

layman -S

then select the 'trusty' unity-gentoo profile :

Code: Select all

 eselect profile list
Available profile symlink targets:
  [1]   default/linux/amd64/13.0
  [2]   default/linux/amd64/13.0/selinux
  [3]   default/linux/amd64/13.0/desktop
  [4]   default/linux/amd64/13.0/desktop/gnome
  [5]   default/linux/amd64/13.0/desktop/gnome/systemd
  [6]   default/linux/amd64/13.0/desktop/kde
  [7]   default/linux/amd64/13.0/desktop/kde/systemd
  [8]   default/linux/amd64/13.0/developer
  [9]   default/linux/amd64/13.0/no-multilib
  [10]  default/linux/amd64/13.0/x32
  [11]  hardened/linux/amd64
  [12]  hardened/linux/amd64/selinux
  [13]  hardened/linux/amd64/no-multilib
  [14]  hardened/linux/amd64/no-multilib/selinux
  [15]  hardened/linux/amd64/x32
  [16]  hardened/linux/uclibc/amd64
  [17]  hardened/linux/musl/amd64
  [18]  unity-gentoo:trusty/amd64 *
  [19]  unity-gentoo:utopic/amd64

then

Code: Select all

emerge -aqv unity-build-env

to setup the correct package masking

once that's done :

Code: Select all

emerge -uDNvta unity-meta

Currently building on my 5 years old macbook :

Code: Select all

Emerging (23 of 535) dev-libs/jsoncpp-0.5.0-r1
>>> Installing (23 of 535) dev-libs/jsoncpp-0.5.0-r1
>>> Jobs: 16 of 535 complete, 2 running             Load avg: 2.78, 1.97, 1.17

Thanks all

noclear2000 · Post by **noclear2000** » Fri Oct 24, 2014 12:32 pm

Updating to Utopic I came across this problem:

Code: Select all

>>> Emerging (21 of 28) unity-base/unity-settings-daemon-14.04.0_p0_p01_p20141014::unity-gentoo
>>> Unpacking source...
 * bzr pull start -->
 *    repository: lp:~noskcaj/unity-settings-daemon/gnome-desktop-3.10c
You have not informed bzr of your Launchpad ID, and you must do this to
write to Launchpad or access private data.  See "bzr help launchpad-login".
http://bazaar.launchpad.net/~noskcaj/unity-settings-daemon/gnome-desktop-3.10c is permanently redirected to http://bazaar.launchpad.net/~noskcaj/unity-settings-daemon/gnome-desktop-3.10c/changes
You have not informed bzr of your Launchpad ID, and you must do this to
write to Launchpad or access private data.  See "bzr help launchpad-login".
bzr: ERROR: These branches have diverged. Use the missing command to see how.
Use the merge command to reconcile them.
 * ERROR: unity-base/unity-settings-daemon-14.04.0_p0_p01_p20141014::unity-gentoo failed (unpack phase):
 *   bzr.eclass: can't pull from lp:~noskcaj/unity-settings-daemon/gnome-desktop-3.10c
 *
 * Call stack:
 *     ebuild.sh, line   93:  Called src_unpack
 *   environment, line 4062:  Called bzr_src_unpack
 *   environment, line 1205:  Called bzr_fetch
 *   environment, line 1174:  Called bzr_update 'lp:~noskcaj/unity-settings-daemon/gnome-desktop-3.10c' '/usr/portage/distfiles/bzr-src/unity-settings-daemon'
 *   environment, line 1222:  Called die
 * The specific snippet of code:
 *           ${EBZR_UPDATE_CMD} ${EBZR_OPTIONS} "${repo_uri}" || die "${EBZR}: can't pull from ${repo_uri}";
 *
 * If you need support, post the output of `emerge --info '=unity-base/unity-settings-daemon-14.04.0_p0_p01_p20141014::unity-gentoo'`,
 * the complete build log and the output of `emerge -pqv '=unity-base/unity-settings-daemon-14.04.0_p0_p01_p20141014::unity-gentoo'`.
 * The complete build log is located at '/var/tmp/portage/unity-base/unity-settings-daemon-14.04.0_p0_p01_p20141014/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/unity-base/unity-settings-daemon-14.04.0_p0_p01_p20141014/temp/environment'.
 * Working directory: '/usr/portage/distfiles/bzr-src/unity-settings-daemon'
 * S: '/var/tmp/portage/unity-base/unity-settings-daemon-14.04.0_p0_p01_p20141014/work/unity-settings-daemon-14.04.0_p0_p01_p20141014'

Is there a new ebuild available that has a corrected branch location? (I just did a layman sync)

thanks a lot!

EDIT:

Code: Select all

rm -rf /usr/portage/distfiles/bzr-src/unity-settings-daemon

and the same for unity-controlcenter did the trick.

finnwiley · Post by **finnwiley** » Wed Aug 10, 2016 3:31 pm

While trying to install properties-cpp from the xenial branch, I am receiving the error "No rule to make target 'gmock/libs/gtest/libgtest.a', needed by 'tests/signals_test'. Stop." Any help or advice is greatly appreciated.

piotr5 · Post by **piotr5** » Fri Aug 12, 2016 12:32 pm

it would be nice if net-mail/gnubiff was added to that overlay. unless you use ./configure --disable-gnome the compilation requires libpanel-applet provided by gnome-panel which is only available in this overlay.

what I did test is adding the overlay, selecting some profile, building unity-base/unity-build-env and then gnome-panel. afterwards the version 2.2.17 from sourceforge did compile with gnome enabled, and it did run in plasma -- although I didn't notice much difference since kde isn't using gnome stuff. so at least it works. since nothing changed I'll undo the profile and revert @world. but maybe unity-users would get something out of it -- and be it just the fact that gnubiff is being maintained again, by the ubuntu-devs...

just for the record: gnubiff-2.2.15::gentoo crashes when changing mailbox-configuration, so it's useful only for the default file-based mailbox. I have a user-patch to fix it, and new versions have that bug fixed too. seems some string-related bug is fixed, probably the one that caused some headers to be unreadable. the repository also mentioned some race-condition being fixed -- those are rare bugs on multi-core systems. and as mentioned another change is the use of libpanel-applet-4 instead of the old libpanelapplet-2. seems the maintainer only fixes easy-to-fix stuff, and applies provided patches...

shiznix · Post by **shiznix** » Sun Aug 14, 2016 9:05 am

finnwiley wrote:While trying to install properties-cpp from the xenial branch, I am receiving the error "No rule to make target 'gmock/libs/gtest/libgtest.a', needed by 'tests/signals_test'. Stop." Any help or advice is greatly appreciated.

Hi finnwiley. Can you provide a pastebin of the complete build.log for dev-libs/properties-cpp?
Also feel free to open an issue on the overlay's github page.

Thanks!

shiznix · Post by **shiznix** » Sun Aug 14, 2016 10:04 am

piotr5 wrote:it would be nice if net-mail/gnubiff was added to that overlay. unless you use ./configure --disable-gnome the compilation requires libpanel-applet provided by gnome-panel which is only available in this overlay.

what I did test is adding the overlay, selecting some profile, building unity-base/unity-build-env and then gnome-panel. afterwards the version 2.2.17 from sourceforge did compile with gnome enabled, and it did run in plasma -- although I didn't notice much difference since kde isn't using gnome stuff. so at least it works. since nothing changed I'll undo the profile and revert @world. but maybe unity-users would get something out of it -- and be it just the fact that gnubiff is being maintained again, by the ubuntu-devs...

just for the record: gnubiff-2.2.15::gentoo crashes when changing mailbox-configuration, so it's useful only for the default file-based mailbox. I have a user-patch to fix it, and new versions have that bug fixed too. seems some string-related bug is fixed, probably the one that caused some headers to be unreadable. the repository also mentioned some race-condition being fixed -- those are rare bugs on multi-core systems. and as mentioned another change is the use of libpanel-applet-4 instead of the old libpanelapplet-2. seems the maintainer only fixes easy-to-fix stuff, and applies provided patches...

Thanks for your interest but we don't have any plans to start maintaining net-mail/gnubiff's Gnome support as it doesn't really fit with the unity-gentoo overlay's overall goal of providing just a Unity desktop.
We do provide some small extras packages in unity-extra/... but these again are specific to Unity desktop.

An alternative may be to maintain it yourself either in your local repo or start your own public overlay.

Cheers!

unheatedgarage · Post by **unheatedgarage** » Mon Sep 19, 2016 11:44 pm

Hello,

Been trying to install this overlay for a couple of days and keep getting this error when it tries to install shotwell:

Code: Select all

>>> Emerging (1 of 102) media-gfx/shotwell-0.22.0_p0_p01_p20160108::unity-gentoo
 * Fetching files in the background.
 * To view fetch progress, run in another terminal:
 * tail -f /var/log/emerge-fetch.log
 * shotwell_0.22.0.orig.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ...[ ok ]
 * shotwell_0.22.0+git20160108.r1.f2fb1f7-0ubuntu1.debian.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ...                                  [ ok ]
>>> Downloading 'http://pkgs.fedoraproject.org/cgit/shotwell.git/plain/shotwell.1'
--2016-09-19 18:23:06--  http://pkgs.fedoraproject.org/cgit/shotwell.git/plain/shotwell.1
Resolving pkgs.fedoraproject.org... 209.132.181.4
Connecting to pkgs.fedoraproject.org|209.132.181.4|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://pkgs.fedoraproject.org/cgit/rpms/shotwell.git/plain/shotwell.1 [following]
--2016-09-19 18:23:06--  http://pkgs.fedoraproject.org/cgit/rpms/shotwell.git/plain/shotwell.1
Reusing existing connection to pkgs.fedoraproject.org:80.
HTTP request sent, awaiting response... 404 Not found
2016-09-19 18:23:07 ERROR 404: Not found.

!!! Couldn't download 'shotwell.1'. Aborting.
 * Fetch failed for 'media-gfx/shotwell-0.22.0_p0_p01_p20160108', Log file:
 *  '/var/tmp/portage/media-gfx/shotwell-0.22.0_p0_p01_p20160108/temp/build.log'

>>> Failed to emerge media-gfx/shotwell-0.22.0_p0_p01_p20160108, Log file:

>>>  '/var/tmp/portage/media-gfx/shotwell-0.22.0_p0_p01_p20160108/temp/build.log'

 * Messages for package media-gfx/shotwell-0.22.0_p0_p01_p20160108:

 * Fetch failed for 'media-gfx/shotwell-0.22.0_p0_p01_p20160108', Log file:
 *  '/var/tmp/portage/media-gfx/shotwell-0.22.0_p0_p01_p20160108/temp/build.log'

Everything else has gone remarkably smoothly. This is a fresh installation. Systemd is working.

When I run emerge -av media-gfx/shotwell, I get:

Code: Select all

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N    ~] media-gfx/shotwell-0.22.0_p0_p01_p20160108::unity-gentoo  LINGUAS="-af -ar -as -ast -bg -bn -bn_IN -ca -cs -da -de -el -en_GB -eo -es -et -eu -fi -fr -gd -gl -gu -he -hi -hr -hu -ia -id -it -ja -kk -km -kn -ko -ky -lt -lv -mk -ml -mr -nb -nl -nn -or -pa -pl -pt -pt_BR -ro -ru -sk -sl -sr -sv -ta -te -th -tr -uk -vi -zh_CN -zh_HK -zh_TW" 2 KiB

Total: 1 package (1 new), Size of downloads: 2 KiB

Would you like to merge these packages? [Yes/No]

I've synced the portage tree and updated Layman. I'm at a loss what to do!

Post by **fedeliallalinea** » Tue Sep 20, 2016 8:11 am

The file shotwell.1 no longer exist on fedora url. Try to download this file manually from http://distfiles.gentoo.org/distfiles/shotwell.1 and move it on /usr/portage/distfiles/