Mam mały problem z distcc, właściwie to nie maly taki, dlatego postanowiłem zwrócić się do Was
Odpalam kompilację tak
Code: Select all
s1 linux-3.2.42-hardened-r1 # make CC="distcc gcc" -j5
make[1]: Nothing to be done for `relocs'.
CHK include/linux/version.h
CHK include/generated/utsrelease.h
CALL scripts/checksyscalls.sh
CHK include/generated/compile.h
CC arch/x86/platform/efi/efi_64.o
CC arch/x86/mm/hugetlbpage.o
distcc[15444] ERROR: compile arch/x86/platform/efi/efi_64.c on 192.168.2.11 failed
distcc[15444] (dcc_build_somewhere) Warning: remote compilation of 'arch/x86/platform/efi/efi_64.c' failed, retrying locally
distcc[15444] Warning: failed to distribute arch/x86/platform/efi/efi_64.c to 192.168.2.11, running locally instead
CC mm/readahead.o
CC kernel/sched.o
CC arch/x86/kernel/setup.o
^Cmake[1]: *** [mm/readahead.o] Interrupt
make[2]: *** [arch/x86/kernel/setup.o] Interrupt
make[2]: *** [arch/x86/mm/hugetlbpage.o] Interrupt
make[1]: *** [kernel/sched.o] Interrupt
make[1]: *** [arch/x86/kernel] Interrupt
make[1]: *** [arch/x86/mm] Interrupt
make: *** [kernel] Interrupt
make: *** [mm] Interrupt
make[3]: *** [arch/x86/platform/efi/efi_64.o] Interrupt
make[2]: *** [arch/x86/platform/efi] Interrupt
make[1]: *** [arch/x86/platform] Interrupt
make: *** [arch/x86] Interrupt
Maszyna na której chce kompilować
Code: Select all
s2 ~ # cat /etc/distcc/hosts
# --- /etc/distcc/hosts -----------------------
# See the "Hosts Specification" section of
# "man distcc" for the format of this file.
#
# By default, just test that it works in loopback mode.
#127.0.0.1 192.168.2.10
s2 ~ # cat /etc/conf.d/distccd
# /etc/conf.d/distccd: config file for /etc/init.d/distccd
DISTCCD_OPTS="'--verbose"
# this is the distccd executable
DISTCCD_EXEC="/usr/bin/distccd"
# this is where distccd will store its pid file
DISTCCD_PIDFILE="/var/run/distccd/distccd.pid"
# set this option to run distccd with extra parameters
# Default port is 3632. For most people the default is okay.
DISTCCD_OPTS="${DISTCCD_OPTS} --port 3632"
# Logging
# You can change some logging options here:
# --log-file FILE
# --log-level LEVEL [critical,error,warning, notice, info, debug]
#
# Leaving --log-file blank will log to syslog
# example: --log-file /dev/null --log-level warning
# example: --log-level critical
#DISTCCD_OPTS="${DISTCCD_OPTS} --log-level critical"
DISTCCD_OPTS="${DISTCCD_OPTS} --log-level info --log-file /tmp/dest"
# SECURITY NOTICE:
# It is HIGHLY recomended that you use the --listen option
# for increased security. You can specify an IP to permit connections
# from or a CIDR mask
# --listen accepts only a single IP
# --allow is now mandatory as of distcc-2.18.
# example: --allow 192.168.0.0/24
# example: --allow 192.168.0.5 --allow 192.168.0.150
# example: --listen 192.168.0.2
DISTCCD_OPTS="${DISTCCD_OPTS} --allow 192.168.2.0/24 --allow 127.0.0.1"
#DISTCCD_OPTS="${DISTCCD_OPTS} --listen 192.168.0.2"
# set this for niceness
# Default is 15
DISTCCD_OPTS="${DISTCCD_OPTS} -N 15"
s2 ~ # cat /etc/make.conf
CHOST="x86_64-pc-linux-gnu"
CFLAGS="-march=core2 -mtune=generic -O2 -pipe"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j3"
USE="bindist mmx sse sse2"
FEATURES="distcc"
GENTOO_MIRRORS="http://gentoo.mirror.pw.edu.pl/"
SYNC="rsync://rsync6.pl.gentoo.org/gentoo-portage"
Code: Select all
distccd[8025] (dcc_listen_by_addr) listening on 0.0.0.0:3632
distccd[8025] (dcc_standalone_server) 2 CPUs online on this server
distccd[8025] (dcc_standalone_server) allowing up to 4 active jobs
distccd[8026] (dcc_log_daemon_started) preforking daemon started (3.1 x86_64-pc-linux-gnu, built May 11 2013 10:02:14)
distccd[8027] (dcc_check_client) connection from 192.168.2.10:37584
distccd[8027] compile from sched.c to sched.o
distccd[8027] (dcc_r_file_timed) 2088225 bytes received in 0.177260s, rate 11504kB/s
distccd[8027] (dcc_collect_child) cc times: user 0.000000s, system 0.000000s, 0 minflt, 0 majflt
distccd[8027] gcc kernel/sched.c on localhost failed
distccd[8027] job complete
distccd[8027] (dcc_job_summary) client: 192.168.2.10:37584 COMPILE_ERROR exit:1 sig:0 core:0 ret:0 time:2247ms gcc kernel/sched.c
distccd[8030] (dcc_check_client) connection from 192.168.2.10:37612
distccd[8030] compile from efi_64.c to efi_64.o
distccd[8030] (dcc_r_file_timed) 981941 bytes received in 0.082510s, rate 11622kB/s
distccd[8030] (dcc_collect_child) cc times: user 0.000000s, system 0.000000s, 0 minflt, 0 majflt
distccd[8030] gcc arch/x86/platform/efi/efi_64.c on localhost failed
distccd[8030] job complete
distccd[8030] (dcc_job_summary) client: 192.168.2.10:37612 COMPILE_ERROR exit:1 sig:0 core:0 ret:0 time:1304ms gcc arch/x86/platform/efi/efi_64.c
Code: Select all
s1 # cat /etc/distcc/hosts
192.168.2.11 127.0.0.1
s1 # cat /etc/conf.d/distccd
# /etc/conf.d/distccd: config file for /etc/init.d/distccd
DISTCCD_OPTS=""
# this is the distccd executable
DISTCCD_EXEC="/usr/bin/distccd"
# this is where distccd will store its pid file
DISTCCD_PIDFILE="/var/run/distccd/distccd.pid"
# set this option to run distccd with extra parameters
# Default port is 3632. For most people the default is okay.
DISTCCD_OPTS="${DISTCCD_OPTS} --port 3632"
# Logging
# You can change some logging options here:
# --log-file FILE
# --log-level LEVEL [critical,error,warning, notice, info, debug]
#
# Leaving --log-file blank will log to syslog
# example: --log-file /dev/null --log-level warning
# example: --log-level critical
#DISTCCD_OPTS="${DISTCCD_OPTS} --log-level warning"
DISTCCD_OPTS="${DISTCCD_OPTS} --log-level info --log-file /tmp/dest"
# SECURITY NOTICE:
# It is HIGHLY recomended that you use the --listen option
# for increased security. You can specify an IP to permit connections
# from or a CIDR mask
# --listen accepts only a single IP
# --allow is now mandatory as of distcc-2.18.
# example: --allow 192.168.0.0/24
# example: --allow 192.168.0.5 --allow 192.168.0.150
# example: --listen 192.168.0.2
DISTCCD_OPTS="${DISTCCD_OPTS} --allow 192.168.2.0/24 --allow 127.0.0.1"
#DISTCCD_OPTS="${DISTCCD_OPTS} --listen 1"
# set this for niceness
# Default is 15
DISTCCD_OPTS="${DISTCCD_OPTS} -N 10"
s1 # cat /etc/make.conf
CFLAGS="-O2 -march=native -mfpmath=sse -mmmx -mssse3 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"
CHOST="x86_64-pc-linux-gnu"
MAKEOPTS="-j5"
GENTOO_MIRRORS="http://gentoo.mirror.pw.edu.pl/"
SYNC="rsync://rsync6.pl.gentoo.org/gentoo-portage"
USE="bindist mmx sse sse2 ipv6 -cups mysql cgi pam ssl xml mysqli pear mcrypt imagick"
FEATURES="distcc"Code: Select all
distccd[11160] (dcc_check_client) connection from 127.0.0.1:52660
distccd[11157] (dcc_check_client) connection from 127.0.0.1:52661
distccd[11236] (dcc_check_client) connection from 127.0.0.1:52662
distccd[11236] compile from readahead.c to readahead.o
distccd[11157] compile from setup.c to setup.o
distccd[11161] (dcc_collect_child) ERROR: Client fd disconnected, killing job
distccd[11161] gcc arch/x86/mm/hugetlbpage.c on localhost failed with exit code 107
distccd[11161] job complete
distccd[11160] compile from sched.c to sched.o
distccd[11160] (dcc_readx) ERROR: unexpected eof on fd5
distccd[11160] (dcc_r_token_int) ERROR: read failed while waiting for token "DOTI"
distccd[11157] (dcc_pump_readwrite) ERROR: unexpected eof on fd5
distccd[11161] (dcc_job_summary) client: 127.0.0.1:52659 CLI_DISCONN exit:107 sig:0 core:0 ret:0 time:1584ms
distccd[11160] (dcc_job_summary) client: 127.0.0.1:52660 OTHER exit:0 sig:0 core:0 ret:108 time:502ms
distccd[11157] (dcc_r_file_timed) 1296375 bytes received in 0.056630s, rate 22355kB/s
distccd[11157] (dcc_job_summary) client: 127.0.0.1:52661 CLI_DISCONN exit:0 sig:0 core:0 ret:107 time:311ms
distccd[11236] (dcc_r_file_timed) 979430 bytes received in 0.091208s, rate 10487kB/s
distccd[11236] (dcc_collect_child) ERROR: Client fd disconnected, killing job
distccd[11236] gcc mm/readahead.c on localhost failed with exit code 107
distccd[11236] job complete
distccd[11236] (dcc_job_summary) client: 127.0.0.1:52662 CLI_DISCONN exit:107 sig:0 core:0 ret:107 time:93
Z góry dziękuje za jakąkolwiek pomoc
Pozdrawiam
