Little help with bumblebee

[radubogdan]

I have installed

Code: Select all

bumblebee-3.0.1-r1  USE="bbswitch" VIDEO_CARDS="nvidia -nouveau"
nvidia-drivers-304.64  USE="X acpi (multilib) tools -pax_kernel"

Code: Select all

# /etc/init.d/vgl start && /etc/init.d/bumblebee start
 * Starting VirtualGL ...                                                                 [ ok ]
 * Starting BumbleBee Daemon ...                                                          [ ok ]

This i my bumblebee.conf: http://pastebin.com/DkaPaP3f
This i my xorg.conf.nvidia: http://pastebin.com/a6787MB7

The problem is when i try to run optirun glxspheres, there is 5-6 seconds delay, i can see the glxspheres window for <1s and then disappear. I also get this

Code: Select all

# optirun glxspheres
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: Gallium 0.4 on llvmpipe (LLVM 0x301)
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  72 (X_PutImage)
  Serial number of failed request:  33
  Current serial number in output stream:  49

I think is easy to fix but i can't see it. Please help me

edit: and foud this in dmesg

Code: Select all

pci 0000:01:00.0: Refused to change power state, currently in D0
pci 0000:01:00.0: power state changed by ACPI to D3

[megaflow]

dit u set opengl to nvidia or intel ?

Code: Select all

eselect opengl list

u also need to rebuild the nvidia-driver and =sys-power/bbswitch-0.5 afer a new kernel

my intel and mesa use flags looks like this

x11-drivers/xf86-video-intel-2.20.18 [topic=]USE="dri sna udev -glamor -uxa -xvmc[/topic]
media-libs/mesa-9.0.1 [topic=]USE="classic egl g3dvl gallium llvm nptl osmesa shared-glapi vdpau xorg VIDEO_CARDS="intel"[/topic]

[radubogdan]

I set nvidia to eselect opengl and now it works, but i have a very very very bad result:

Code: Select all

optirun glxspheres
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: GeForce GT 630M/PCIe/SSE2
55.405399 frames/sec - 49.465940 Mpixels/sec
50.499717 frames/sec - 45.086147 Mpixels/sec
54.361255 frames/sec - 48.533729 Mpixels/sec
38.188157 frames/sec - 33.421402 Mpixels/sec
59.456495 frames/sec - 47.172486 Mpixels/sec
56.426781 frames/sec - 44.768726 Mpixels/sec

Also i have erased options bbswitch load_state=-1 unload_state=-1 from /etc/modprobe.d/bbswitch, no that file is empty

[megaflow]

sorry whas not clear on the opengl part i have xorg-x11 as default

but yours bumblebee.conf is not corect

# colon-separated path to the nvidia libraries
LibraryPath=

and
# default Xorg modules path
XorgModulePath=

looks in my config like this

# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib64/opengl/nvidia/lib:/usr/lib32/opengl/nvidia/lib:/usr/lib/opengl/nvidia/lib

# default Xorg modules path
XorgModulePath=/usr/lib64/opengl/nvidia/lib,/usr/lib64/opengl/nvidia/extensions,/usr/lib64/xorg/modules/drivers,/usr/lib64/xorg/modules

[radubogdan]

it works like u said, but i don't think this is good for my card:

Code: Select all

OpenGL Renderer: GeForce GT 630M/PCIe/SSE2
57.322871 frames/sec - 46.699797 Mpixels/sec
57.378357 frames/sec - 46.745000 Mpixels/sec
57.982188 frames/sec - 47.236929 Mpixels/sec
34.461778 frames/sec - 27.601639 Mpixels/sec

I remember that i should have >150 frames/sec

[megaflow]

dit u edit bumblebee.conf ?

[radubogdan]

Yes, like u said

# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib64/opengl/nvidia/lib:/usr/lib32/opengl/nvidia/lib:/usr/lib/opengl/nvidia/lib

# default Xorg modules path
XorgModulePath=/usr/lib64/opengl/nvidia/lib,/usr/lib64/opengl/nvidia/extensions,/usr/lib64/xorg/modules/drivers,/usr/lib64/xorg/modules

[megaflow]

dit u restart X and bumblebee. or reboot ?

[radubogdan]

dit u restart X and bumblebee. or reboot ?

of course