[xorg] Problem z uruchomieniem po aktualizacji systemu

[spychu]

Witam,

Po aktualizacji systemu wraz z zależnościami mam problem z uruchomieniem serwera x.
Moduł do mojej karty jest załadowany (fglrx)
lspci:

Code: Select all

01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] 

lsmod:

Code: Select all

Module                  Size  Used by
snd_hda_codec_hdmi     21065  1 
snd_hda_codec_realtek    89031  1 
snd_hda_intel          18911  0 
snd_hda_codec          64356  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               4484  1 snd_hda_codec
snd_pcm                57920  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
arc4                    1046  2 
snd_timer              14407  1 snd_pcm
ath9k                  77728  0 
mac80211              288442  1 ath9k
ath9k_common            1430  1 ath9k
ath9k_hw              346497  2 ath9k,ath9k_common
fglrx                4641890  0 
snd                    40681  7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
ath                    12081  3 ath9k,ath9k_common,ath9k_hw
snd_page_alloc          5573  2 snd_hda_intel,snd_pcm
cfg80211              145616  3 ath9k,mac80211,ath

Xorg.0.log:

Code: Select all

X.Org X Server 1.13.0
Release Date: 2012-09-05
[  1088.333] X Protocol Version 11, Revision 0
[  1088.335] Build Operating System: Linux 3.3.8-gentoo i686 Gentoo
[  1088.336] Current Operating System: Linux gentoo 3.3.8-gentoo #1 SMP Mon Sep 3 22:14:11 CEST 2012 i686
[  1088.336] Kernel command line: root=/dev/sda6 video=vesafb:mtrr:3.ywrap vga=0x324 splash=silent,theme:powered_by_gentoo console=tty1
[  1088.339] Build Date: 28 November 2012  09:33:03PM
[  1088.341]  
[  1088.342] Current version of pixman: 0.28.0
[  1088.345] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1088.345] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1088.351] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec  1 17:47:02 2012
[  1088.351] (II) Loader magic: 0x8229620
[  1088.351] (II) Module ABI versions:
[  1088.351] 	X.Org ANSI C Emulation: 0.4
[  1088.351] 	X.Org Video Driver: 13.0
[  1088.351] 	X.Org XInput driver : 18.0
[  1088.351] 	X.Org Server Extension : 7.0
[  1088.353] (--) PCI:*(0:1:0:0) 1002:68c1:104d:9071 rev 0, Mem @ 0xe0000000/268435456, 0xf0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[  1088.355] List of video drivers:
[  1088.356] 	fglrx
[  1088.356] (II) LoadModule: "fglrx"
[  1088.356] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[  1088.367] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[  1088.367] 	compiled for 1.4.99.906, module version = 9.1.11
[  1088.367] 	Module class: X.Org Video Driver
[  1088.367] (II) Loading sub module "fglrxdrm"
[  1088.367] (II) LoadModule: "fglrxdrm"
[  1088.367] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  1088.368] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1088.368] 	compiled for 1.4.99.906, module version = 9.1.11
[  1088.368] (WW) Falling back to old probe method for fglrx
[  1088.374] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[  1088.376] No devices to configure.  Configuration failed. 

Przeinstalowanie ati-drivers emergem nie przyniosło żadnych zmian.
Konfiguracja xorg.conf również jest poprawna.

Nie mam zabardzo pomysłu jak to ruszyć, może ktoś nakieruje ?

Dzięki

[olejseba]

Wywal moduł rmmod, potem modprobe i daj co wywali dmesg. W międzyczasie przemegruj xorg'a i zobacz elesect'em opengl co masz ustawione.