usb printer not found

[gentoorockerfr]

Suddenly i cannot find my printer.
i have cups 1.5.3 libusb and i have removed usblp module.
dmesg

Code: Select all

.273670] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0004
[ 1419.273679] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001003 0  ACK POWER sig=se0 CSC CONNECT
[ 1419.273685] hub 4-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
[ 1419.299414] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001002 0  ACK POWER sig=se0 CSC
[ 1419.325338] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
[ 1419.429025] hub 4-0:1.0: debounce: port 2: total 150ms stable 100ms status 0x501
[ 1419.479910] ehci_hcd 0000:00:13.2: port 2 reset complete, port enabled
[ 1419.479914] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
[ 1419.530709] usb 4-2: new high-speed USB device number 2 using ehci_hcd
[ 1419.581581] ehci_hcd 0000:00:13.2: port 2 reset complete, port enabled
[ 1419.581585] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
[ 1419.645150] usb 4-2: default language 0x0409
[ 1419.645523] usb 4-2: udev 2, busnum 4, minor = 385
[ 1419.645525] usb 4-2: New USB device found, idVendor=04a9, idProduct=1730
[ 1419.645526] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1419.645528] usb 4-2: Product: MP540 series
[ 1419.645529] usb 4-2: Manufacturer: Canon
[ 1419.645530] usb 4-2: SerialNumber: 0096D0
[ 1419.645571] usb 4-2: usb_probe_device
[ 1419.645573] usb 4-2: configuration #1 chosen from 1 choice
[ 1419.645776] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[ 1419.645820] usb 4-2: adding 4-2:1.1 (config #1, interface 1)
[ 1419.645847] usb 4-2: adding 4-2:1.2 (config #1, interface 2)
[ 1419.645860] uas 4-2:1.2: usb_probe_interface
[ 1419.645862] uas 4-2:1.2: usb_probe_interface - got id
[ 1419.645869] libusual 4-2:1.2: usb_probe_interface
[ 1419.645872] libusual 4-2:1.2: usb_probe_interface - got id
[ 1419.645877] usb-storage 4-2:1.2: usb_probe_interface
[ 1419.645880] usb-storage 4-2:1.2: usb_probe_interface - got id
[ 1419.645937] scsi11 : usb-storage 4-2:1.2
[ 1419.645988] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0004
[ 1420.644452] scsi 11:0:0:0: Direct-Access     Canon    MP540 series     0102 PQ: 0 ANSI: 2
[ 1420.644548] sd 11:0:0:0: Attached scsi generic sg5 type 0
[ 1420.647681] sd 11:0:0:0: [sde] Attached SCSI removable disk

lsusb

Code: Select all

Bus 004 Device 002: ID 04a9:1730 Canon, Inc. 

how could i fix it?
thank you

[dE_logics]

You cannot 'find' your printer; did you remove it from CUPS or did it disappear?

[gentoorockerfr]

i removed it because printer did not print
it status was idle but no printing and the jobs seemed completed...
so i re emerged cups etc.... ,removed printer and tried to add it again
but suddenly there was not any printer at localhost:631 or printer-applet-kde

[dE_logics]

i removed it because printer did not print
it status was idle but no printing and the jobs seemed completed...
so i re emerged cups etc.... ,removed printer and tried to add it again
but suddenly there was not any printer at localhost:631 or printer-applet-kde

Did you notice anything in CUPS logs (/var/log/cups or syslog)?

If not try increasing it's verbosity (Loglevel debug)

[gentoorockerfr]

here are
http://www.sendspace.com/file/lrekef errors

http://www.sendspace.com/file/h2zoz5 access


is it normal?
1419.645988] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0004
[ 1420.644452] scsi 11:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
[ 1420.644548] sd 11:0:0:0: Attached scsi generic sg5 type 0
[ 1420.647681] sd 11:0:0:0: [sde] Attached SCSI removable disk

see my printer as a scsi removable disk????

[dE_logics]

here are
http://www.sendspace.com/file/lrekef errors

http://www.sendspace.com/file/h2zoz5 access


is it normal?
1419.645988] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0004
[ 1420.644452] scsi 11:0:0:0: Direct-Access Canon MP540 series 0102 PQ: 0 ANSI: 2
[ 1420.644548] sd 11:0:0:0: Attached scsi generic sg5 type 0
[ 1420.647681] sd 11:0:0:0: [sde] Attached SCSI removable disk

see my printer as a scsi removable disk????

Does it have a memory card reader?

Also I doubt the printer is working. Can you try it in another distro? Like Sabayon?

[galanom]

Just a question, regarding

Code: Select all

Unable to open listen socket for address [v1.::]:631 - Address family not supported by protocol.

You're trying to connect to cups with IPv6?
Have you compiled IPv6 support, including security modules?
Do you even get to the CUPS control panel? Please define better "I do not see the printer"

[gentoorockerfr]

You're trying to connect to cups with IPv6? ---> No
Have you compiled IPv6 support, including security modules? --> No

So what have i to do?