xdm starts but imediatly returns to login window after login

Message

kevstar31 · Post by **kevstar31** » Sat Oct 01, 2011 5:23 am

/var/log/Xorg.0.log

xdm info (pid 16076): Starting
xdm info (pid 16076): Starting X server on :0

X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-gentoo-r3 i686 Gentoo
Current Operating System: Linux localhost 2.6.39-gentoo-r3 #2 SMP Fri Sep 30 13:42:24 EDT 2011 i686
Kernel command line: root=/dev/sda2 
Build Date: 30 September 2011  04:34:27PM
 
Current version of pixman: 0.22.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 30 21:04:55 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
FATAL: Module nouveau not found.
(EE) [drm] failed to open device
(EE) open /dev/fb0: No such file or directory
xdm info (pid 16086): sourcing /usr/lib/X11/xdm/Xsetup_0
xdm info (pid 16086): sourcing /usr/lib/X11/xdm/GiveConsole
xdm info (pid 16095): executing session /usr/lib/X11/xdm/Xsession
xdm info (pid 16086): sourcing /usr/lib/X11/xdm/TakeConsole
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 162 requests (131 known processed) with 0 events remaining.
xdm info (pid 16076): Starting X server on :0
error setting MTRR (base = 0xf1000000, size = 0x00e00000, type = 1) Invalid argument (22)
2 XSELINUXs still allocated at reset
SCREEN: 0 objects of 132 bytes = 0 total bytes 0 private allocs
COLORMAP: 0 objects of 4 bytes = 0 total bytes 0 private allocs
DEVICE: 0 objects of 24 bytes = 0 total bytes 0 private allocs
CLIENT: 0 objects of 140 bytes = 0 total bytes 0 private allocs
WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
PIXMAP: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GC: 0 objects of 44 bytes = 0 total bytes 0 private allocs
CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
TOTAL: 1 objects, 8 bytes, 0 allocs
1 SELECTIONs still allocated at reset
WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
PIXMAP: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GC: 0 objects of 44 bytes = 0 total bytes 0 private allocs
CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
TOTAL: 1 objects, 8 bytes, 0 allocs
1 PIXMAPs still allocated at reset
PIXMAP: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GC: 0 objects of 44 bytes = 0 total bytes 0 private allocs
CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
TOTAL: 1 objects, 8 bytes, 0 allocs
xdm info (pid 16114): sourcing /usr/lib/X11/xdm/Xsetup_0
xdm info (pid 16076): Shutting down
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 162 requests (131 known processed) with 0 events remaining.
xdm info (pid 16076): display :0 is being disabled
xdm info (pid 16076): Exiting

/var/log/Xorg.0.log: http://pastebin.com/jMy5PuiQ

djinnZ · Post by **djinnZ** » Sat Oct 01, 2011 10:24 am

You have not rightly configured the graphics driver so, after the loggin, the wm (than require graphics acceleration) crash IMHO.

Refine the configuration in order to have the acceleration active (forget to use eselect, kernel module not loaded etc.)