[Processor] intel core i3 : which kernel option ? (solved)

[noobux]

Hi everyone,

I am looking for the right setting for 'processor family' in the kernel menuconfig, I want to have something more powerfull than generic x86_64, my processor is a :

Code: Select all

Processor	Intel(R) Core(TM) i3 CPU       M 350  @ 2.27GHz, 2266 MHz, 2 cores, 4 logical processors

(this was traducted from french)

So I don't know which option to take because I found nothing about the core Ix CPU.
Which option should I choose ?

Thanks everyone !and sorry for the english ... iam french .

[thalcave]

I have also Intel Core i3 (exactly 370M) and my make.conf contains:

Code: Select all

 
CFLAGS="-march=core2 -O2 -pipe -fomit-frame-pointer"
MAKEOPTS="-j5"

[noobux]

Ok right, but which option did you set in the kernel ( from menuconfig ), "-march=core2" did you mean you set the processor family to "Core 2 and newer Xeon"?

[Aquous]

Yep, that's the one.

[noobux]

Ok thank you ! My problem is solved !

[Bazra]

------------------
System Information
------------------
Time of this report: 10/27/2014, 16:42:57
Machine name: BAZRA
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Inspiron N4050
BIOS: BIOS Date: 11/14/11 10:19:57 Ver: 04.06.04
Processor: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (4 CPUs), ~2.3GHz
Memory: 2048MB RAM
Available OS Memory: 1950MB RAM
Page File: 1507MB used, 2392MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) HD Graphics Family
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_0116&SUBSYS_05021028&REV_09
Display Memory: 783 MB
Dedicated Memory: 64 MB
Shared Memory: 719 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: LGD02E9
Native Mode: 1366 x 768(p) (59.996Hz)
Output Type: Internal
Driver Name: igdumdx32.dll,igd10umd32.dll,igd10umd32.dll

------------------------
Disk & DVD/CD-ROM Drives
------------------------
Drive: C:
Free Space: 35.0 GB
Total Space: 76.8 GB
File System: NTFS
Model: WDC WD5000BPVT-75HXZT3 ATA Device

Drive: D:
Free Space: 73.7 GB
Total Space: 200.0 GB
File System: NTFS
Model: WDC WD5000BPVT-75HXZT3 ATA Device

Drive: E:
Free Space: 29.0 GB
Total Space: 200.0 GB
File System: NTFS
Model: WDC WD5000BPVT-75HXZT3 ATA Device

Drive: F:
Model: TSSTcorp DVD+-RW SN-208BB ATA Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), 11/21/2010 03:14:03, 108544 bytes

--------------
System Devices
--------------
Name: Standard Enhanced PCI to USB Host Controller
Device ID: PCI\VEN_8086&DEV_1C26&SUBSYS_05021028&REV_05\3&11583659&0&E8
Driver: C:\Windows\system32\drivers\usbehci.sys, 6.01.7601.18328 (English), 11/27/2013 06:58:41, 43520 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.01.7601.18328 (English), 11/27/2013 06:58:46, 284672 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.01.7601.18328 (English), 11/27/2013 06:59:25, 258560 bytes

Name: Intel(R) HD Graphics Family
Device ID: PCI\VEN_8086&DEV_0116&SUBSYS_05021028&REV_09\3&11583659&0&10

Please Help Me To Get With It !!!