Code: Select all
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
04:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
05:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
05:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
05:06.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
05:06.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
05:06.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Code: Select all
lsmod
Module Size Used by
ath9k 241844 0
mac80211 160072 1 ath9k
ath 10072 1 ath9k
cfg80211 100592 3 ath9k,mac80211,ath
I jeszcze dmesg
Code: Select all
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000b7c0d000 - 00000000b7cb8000
PM: Registered nosave memory: 00000000b7ced000 - 00000000b7cee000
PM: Registered nosave memory: 00000000b7d2e000 - 00000000b7d31000
PM: Registered nosave memory: 00000000b7dbb000 - 00000000b7dbf000
PM: Registered nosave memory: 00000000b7e85000 - 00000000b7ebf000
PM: Registered nosave memory: 00000000b7eef000 - 00000000b7eff000
Allocating PCI resources starting at b7f00000 (gap: b7f00000:3c100000)
NR_CPUS:5 nr_cpumask_bits:5 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 24 pages at ffff8800017e0000, static data 68000 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 742655
Kernel command line: root=/dev/sda6
PID hash table entries: 4096 (order: 12, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 3ef0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2953912k/3013632k available (4631k kernel code, 1400k absent, 57688k reserved, 2556k data, 384k init)
NR_IRQS:416
Fast TSC calibration using PIT
Detected 2194.301 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.60 BogoMIPS (lpj=21943010)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 00b7f00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4388.87 BogoMIPS (lpj=21944354)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 5 MCE banks
System has AMD C1E enabled
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8777.47 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
Switch to broadcast mode on CPU1
NET: Registered protocol family 16
Switch to broadcast mode on CPU0
TOM: 00000000c0000000 aka 3072M
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PFA1] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0x7038-0x703f]
pci 0000:00:12.0: reg 14 io port: [0x704c-0x704f]
pci 0000:00:12.0: reg 18 io port: [0x7030-0x7037]
pci 0000:00:12.0: reg 1c io port: [0x7048-0x704b]
pci 0000:00:12.0: reg 20 io port: [0x7010-0x701f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xce509000-0xce5093ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: reg 10 32bit mmio: [0xce508000-0xce508fff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xce507000-0xce507fff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xce506000-0xce506fff]
pci 0000:00:13.3: reg 10 32bit mmio: [0xce505000-0xce505fff]
pci 0000:00:13.4: reg 10 32bit mmio: [0xce504000-0xce504fff]
pci 0000:00:13.5: reg 10 32bit mmio: [0xce509400-0xce5094ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0x7000-0x700f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xce500000-0xce503fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:05.0: reg 10 64bit mmio: [0xc0000000-0xc7ffffff]
pci 0000:01:05.0: reg 18 64bit mmio: [0xce400000-0xce40ffff]
pci 0000:01:05.0: reg 20 io port: [0x6000-0x60ff]
pci 0000:01:05.0: reg 24 32bit mmio: [0xce300000-0xce3fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xce300000-0xce4fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xc7ffffff]
pci 0000:00:04.0: bridge io port: [0x5000-0x5fff]
pci 0000:00:04.0: bridge 32bit mmio: [0xcd300000-0xce2fffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xc8000000-0xc8ffffff]
pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:03:00.0: reg 18 64bit mmio: [0xc9010000-0xc9010fff]
pci 0000:03:00.0: reg 20 64bit mmio: [0xc9000000-0xc900ffff]
pci 0000:03:00.0: unsupported PM cap regs version (7)
pci 0000:00:05.0: bridge io port: [0x3000-0x4fff]
pci 0000:00:05.0: bridge 32bit mmio: [0xcc300000-0xcd2fffff]
pci 0000:00:05.0: bridge 64bit mmio pref: [0xc9000000-0xca0fffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xcb200000-0xcb20ffff]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:06.0: bridge 32bit mmio: [0xcb200000-0xcc2fffff]
pci 0000:00:06.0: bridge 64bit mmio pref: [0xca100000-0xcb0fffff]
pci 0000:05:06.0: reg 10 32bit mmio: [0xcb100000-0xcb1007ff]
pci 0000:05:06.0: supports D1 D2
pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:06.0: PME# disabled
pci 0000:05:06.1: reg 10 32bit mmio: [0xcb100b00-0xcb100bff]
pci 0000:05:06.1: supports D1 D2
pci 0000:05:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:06.1: PME# disabled
pci 0000:05:06.2: reg 10 32bit mmio: [0xcb100a00-0xcb100aff]
pci 0000:05:06.2: supports D1 D2
pci 0000:05:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:06.2: PME# disabled
pci 0000:05:06.3: reg 10 32bit mmio: [0xcb100900-0xcb1009ff]
pci 0000:05:06.3: supports D1 D2
pci 0000:05:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:06.3: PME# disabled
pci 0000:05:06.4: reg 10 32bit mmio: [0xcb100800-0xcb1008ff]
pci 0000:05:06.4: supports D1 D2
pci 0000:05:06.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:06.4: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0x1000-0x1fff]
pci 0000:00:14.4: bridge 32bit mmio: [0xcb100000-0xcb1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x400-0x4cf has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x4d6-0x4d6 has been reserved
system 00:07: ioport range 0x680-0x6ff has been reserved
system 00:07: ioport range 0x77a-0x77a has been reserved
system 00:07: ioport range 0xc00-0xc01 has been reserved
system 00:07: ioport range 0xc14-0xc14 has been reserved
system 00:07: ioport range 0xc50-0xc52 has been reserved
system 00:07: ioport range 0xc6c-0xc6c has been reserved
system 00:07: ioport range 0xc6f-0xc6f has been reserved
system 00:07: ioport range 0xcd0-0xcdb has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0xcdc-0xcdf has been reserved
system 00:07: iomem range 0xff800100-0xff80017f has been reserved
system 00:08: iomem range 0x0-0x9ffff could not be reserved
system 00:08: iomem range 0xec000-0xfffff could not be reserved
system 00:08: iomem range 0x100000-0xbfffffff could not be reserved
system 00:08: iomem range 0xf4000000-0xf7ffffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x6000-0x6fff
pci 0000:00:01.0: MEM window: 0xce300000-0xce4fffff
pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000c7ffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
pci 0000:00:04.0: IO window: 0x5000-0x5fff
pci 0000:00:04.0: MEM window: 0xcd300000-0xce2fffff
pci 0000:00:04.0: PREFETCH window: 0x000000c8000000-0x000000c8ffffff
pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
pci 0000:00:05.0: IO window: 0x3000-0x4fff
pci 0000:00:05.0: MEM window: 0xcc300000-0xcd2fffff
pci 0000:00:05.0: PREFETCH window: 0x000000c9000000-0x000000ca0fffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:04
pci 0000:00:06.0: IO window: 0x2000-0x2fff
pci 0000:00:06.0: MEM window: 0xcb200000-0xcc2fffff
pci 0000:00:06.0: PREFETCH window: 0x000000ca100000-0x000000cb0fffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: 0x1000-0x1fff
pci 0000:00:14.4: MEM window: 0xcb100000-0xcb1fffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:01: resource 1 mem: [0xce300000-0xce4fffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc7ffffff]
pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:08: resource 1 mem: [0xcd300000-0xce2fffff]
pci_bus 0000:08: resource 2 pref mem [0xc8000000-0xc8ffffff]
pci_bus 0000:03: resource 0 io: [0x3000-0x4fff]
pci_bus 0000:03: resource 1 mem: [0xcc300000-0xcd2fffff]
pci_bus 0000:03: resource 2 pref mem [0xc9000000-0xca0fffff]
pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:04: resource 1 mem: [0xcb200000-0xcc2fffff]
pci_bus 0000:04: resource 2 pref mem [0xca100000-0xcb0fffff]
pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:05: resource 1 mem: [0xcb100000-0xcb1fffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x44 set to 0x1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.12)
msgmni has been set to 5770
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:00:13.5: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:01:05.0: Boot video device
pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:05.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:05.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:06.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
ACPI: AC Adapter [ADP0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN1] (off)
ACPI: processor limited to max C-state 1
processor LNXCPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
processor LNXCPU:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THZN] (49 C)
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ACPI: Battery Slot [BAT0] (battery present)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x7000-0x7007
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-T40F, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xce509000 port 0xce509100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xce509000 port 0xce509180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xce509000 port 0xce509200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xce509000 port 0xce509280 irq 22
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 27 for MSI/MSI-X
eth0: RTL8102e at 0xffffc900000c8000, 00:1e:33:3d:4d:79, XID 34a00000 IRQ 27
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: setting latency timer to 64
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xce509400
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-gentoo-r10 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xce508000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-gentoo-r10 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: setting latency timer to 64
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xce507000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-gentoo-r10 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: setting latency timer to 64
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xce506000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-gentoo-r10 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: setting latency timer to 64
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xce505000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-gentoo-r10 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: setting latency timer to 64
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xce504000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-gentoo-r10 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbtmc
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: FUJITSU MHY2250BH, 0040020B, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2250B 0040 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
usb 1-8: new high speed USB device using ehci_hcd and address 3
sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-8: New USB device found, idVendor=04f2, idProduct=b008
usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-8: Product: Chicony USB 2.0 Camera
usb 1-8: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-8: SerialNumber: SN0001
usb 1-8: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usbtest
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Linux video capture interface: v2.00
usbcore: registered new interface driver stkwebcam
uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 3-1: new low speed USB device using ohci_hcd and address 2
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
No device for DAI AD73311
No device for DAI AK4535
Cirrus Logic CS4270 ALSA SoC Codec Driver
No device for DAI PCM3008 HiFi
No device for DAI SSM2602
No device for DAI tlv320aic23
No device for DAI tlv320aic3x
No device for DAI UDA134X
No device for DAI UDA1380
No device for DAI UDA1380
No device for DAI UDA1380
No device for DAI WM8510 HiFi
No device for DAI WM8728
No device for DAI WM8750
No device for DAI WM8971
No device for DAI WM8990 ADC/DAC Primary
ALSA device list:
#0: HDA ATI SB at 0xce500000 irq 16
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-64 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x12
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x13
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x14
powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x15
powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x1e
usb 3-1: New USB device found, idVendor=04f3, idProduct=02f0
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: 4-D G Laser Mouse
usb 3-1: configuration #1 chosen from 1 choice
input: 4-D G Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5
generic-usb 0003:04F3:02F0.0001: input: USB HID v1.11 Mouse [4-D G Laser Mouse] on usb-0000:00:13.1-1/input0
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda6: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 2796106
ext3_orphan_cleanup: deleting unreferenced inode 2812281
ext3_orphan_cleanup: deleting unreferenced inode 2812282
ext3_orphan_cleanup: deleting unreferenced inode 4030513
ext3_orphan_cleanup: deleting unreferenced inode 4030512
ext3_orphan_cleanup: deleting unreferenced inode 4030510
ext3_orphan_cleanup: deleting unreferenced inode 4030509
ext3_orphan_cleanup: deleting unreferenced inode 4030508
ext3_orphan_cleanup: deleting unreferenced inode 4030507
ext3_orphan_cleanup: deleting unreferenced inode 4030481
EXT3-fs: sda6: 10 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
Freeing unused kernel memory: 384k freed
Write protecting the kernel read-only data: 6416k
udev: starting version 149
cfg80211: Calling CRDA to update world regulatory domain
ath9k 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath9k 0000:04:00.0: setting latency timer to 64
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xffffc900000a0000, irq=18
EXT3 FS on sda6, internal journal
Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k
wlan0: authenticate with AP 00:24:01:56:57:7b
wlan0: authenticated
wlan0: associate with AP 00:24:01:56:57:7b
wlan0: RX AssocResp from 00:24:01:56:57:7b (capab=0x411 status=0 aid=4)
wlan0: associated
pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
Clocksource tsc unstable (delta = -125376265 ns)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
