Forums

Skip to content

Advanced search
  • Quick links
    • Unanswered topics
    • Active topics
    • Search
  • FAQ
  • Login
  • Register
  • Board index Assistance Networking & Security
  • Search

rtl8187b Authentication timed out.

Having problems getting connected to the internet or running a server? Wondering about securing your box? Ask here.
Post Reply
Advanced search
13 posts • Page 1 of 1
Author
Message
kevstar31
Guru
Guru
User avatar
Posts: 449
Joined: Wed Nov 22, 2006 6:03 pm
Location: Ohio

rtl8187b Authentication timed out.

  • Quote

Post by kevstar31 » Sat Jan 23, 2010 11:14 pm

Code: Select all

> <2>Authentication with 00:00:00:00:00:00 timed out.
<2>CTRL-EVENT-SCAN-RESULTS                           
<2>Trying to associate with 00:17:df:7e:f2:60 (SSID='xavierstudent' freq=2412 MHz)
<2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys                       
<2>Authentication with 00:00:00:00:00:00 timed out.                               
<2>CTRL-EVENT-SCAN-RESULTS                                                        
<2>Trying to associate with 00:17:df:7f:08:60 (SSID='xavierstudent' freq=2412 MHz)
<2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys                       
<2>Authentication with 00:00:00:00:00:00 timed out.                               
<2>CTRL-EVENT-SCAN-RESULTS                                                        
<2>Trying to associate with 00:17:df:7e:f2:60 (SSID='xavierstudent' freq=2412 MHz)
<2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys                       
<2>Authentication with 00:00:00:00:00:00 timed out.                               
<2>CTRL-EVENT-SCAN-RESULTS                                                        
<2>Trying to associate with 00:17:df:7e:f1:30 (SSID='xavierstudent' freq=2462 MHz)
<2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 

Code: Select all

Bus 001 Device 003: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter

Code: Select all

ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
network={
	ssid="xavierstudent"
	psk="XXXXXX"
	proto=RSN
	scan_ssid=1
}
network={
	ssid="dd-wrt"
	key_mgmt=NONE
}

Code: Select all

          Cell 32 - Address: 00:17:DF:7E:E8:10
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=43/70  Signal level=-67 dBm  
                    Encryption key:on
                    ESSID:"xavierstudent"
                    Bit Rates:5.5 Mb/s; 6 Mb/s; 9 Mb/s; 11 Mb/s; 12 Mb/s
                              18 Mb/s; 24 Mb/s; 36 Mb/s
                    Bit Rates:48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000015cf6f2e738
                    Extra: Last beacon: 251ms ago
                    IE: Unknown: 000D78617669657273747564656E74
                    IE: Unknown: 01088B0C129618243048
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706555320010B1A
                    IE: Unknown: 0B0502002E0000
                    IE: Unknown: 2A0106
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 3202606C
                    IE: Unknown: 9606004096001400
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD06004096010104
                    IE: Unknown: DD050040960305
                    IE: Unknown: DD050040960B09
                    IE: Unknown: DD050040961401
Last edited by kevstar31 on Sun Jan 31, 2010 12:35 am, edited 2 times in total.
while(true) std::cout << "Jesus I trust in you." << std::endl;
My Political Compass
Top
Telemin
l33t
l33t
User avatar
Posts: 753
Joined: Thu Aug 25, 2005 8:40 pm
Location: Glasgow, UK

  • Quote

Post by Telemin » Sun Jan 24, 2010 1:01 am

Usually means you have the wrong key or the AP is refusing your connection attempts, due to your trying to use the wrong encryption or your MAC address not being on a whitelist (or being on a blacklist :P)

Shalom

-Freestyling-
The Geek formerly known as -Freestyling-
When you feel your problem has been solved please add [Solved] to the topic title.
Please adopt an unanswered post
Top
kevstar31
Guru
Guru
User avatar
Posts: 449
Joined: Wed Nov 22, 2006 6:03 pm
Location: Ohio

  • Quote

Post by kevstar31 » Sun Jan 24, 2010 2:52 am

No i can get wireless to work using the same key when i am running the sabayon live cd. is there a way that i can find out what drivers and settings are used on the cd. Networkmanager is used so ican not find a wpa_supplicant.conf. so the key works but are the other parts of the wpa_supplicant.conf correct?
while(true) std::cout << "Jesus I trust in you." << std::endl;
My Political Compass
Top
cach0rr0
Bodhisattva
Bodhisattva
User avatar
Posts: 4123
Joined: Thu Nov 13, 2008 11:14 pm
Location: Houston, Republic of Texas

  • Quote

Post by cach0rr0 » Sun Jan 24, 2010 6:41 am

kevstar31 wrote:No i can get wireless to work using the same key when i am running the sabayon live cd. is there a way that i can find out what drivers and settings are used on the cd. Networkmanager is used so ican not find a wpa_supplicant.conf. so the key works but are the other parts of the wpa_supplicant.conf correct?
far as the drivers the CD uses, a lspci -k should show it

far as your wpa_supplicant.conf goes, I don't see anything glaringly wrong, though i just checked both `man wpa_supplicant.conf` and `man wpa_supplicant` and find no mention of proto.

I don't know if you've already considered this and ruled it out, but if you use WICD you don't have to fiddle around with any of this manual configuration bollocks. Of course that's a no-go if you don't have X on the box, but if you do WICD would save you the headache (unless you're looking for the educational experience as much as you're looking for a functional setup - I don't care about the educational experience, so I use WICD!)

Could be a kernel issue, but I highly doubt it - might chunk your .config on pastebin so we can have a look, but again I highly doubt it's in any way relevant (just wondering if maybe you're using LIB80211, when you should only typically use MAC80211)
Lost configuring your system?
dump lspci -n here | see Pappy's guide | Link Stash
Top
Telemin
l33t
l33t
User avatar
Posts: 753
Joined: Thu Aug 25, 2005 8:40 pm
Location: Glasgow, UK

  • Quote

Post by Telemin » Sun Jan 24, 2010 1:52 pm

May I suggest that you take the proto and ap_scan lines out of the wpa_supplicant config. I tend to find that wpa_supplicant can generally figure things out okay on its own, the only time you'd want to be specific is if you are on an AP which supports both old and new security and want to force the most secure protocol for your own connection.

-Freestyling-
The Geek formerly known as -Freestyling-
When you feel your problem has been solved please add [Solved] to the topic title.
Please adopt an unanswered post
Top
kevstar31
Guru
Guru
User avatar
Posts: 449
Joined: Wed Nov 22, 2006 6:03 pm
Location: Ohio

  • Quote

Post by kevstar31 » Sun Jan 24, 2010 7:04 pm

.config
freestyling wrote:May I suggest that you take the proto and ap_scan lines out of the wpa_supplicant config.
same problem after commenting out those lines
while(true) std::cout << "Jesus I trust in you." << std::endl;
My Political Compass
Top
Telemin
l33t
l33t
User avatar
Posts: 753
Joined: Thu Aug 25, 2005 8:40 pm
Location: Glasgow, UK

  • Quote

Post by Telemin » Sun Jan 24, 2010 7:19 pm

You could also try forcing the old wpa1 protocol for connection with the config:

Code: Select all


network={
   ssid="xavierstudent"
   psk="XXXXXX"
   proto=WPA
   key_mgmt=WPA-PSK
}

If it still doesn't like to associate then you could try calling wpa_supplicant with the option -dddt to get more detailed debugging output for what is going on.
The Geek formerly known as -Freestyling-
When you feel your problem has been solved please add [Solved] to the topic title.
Please adopt an unanswered post
Top
kevstar31
Guru
Guru
User avatar
Posts: 449
Joined: Wed Nov 22, 2006 6:03 pm
Location: Ohio

  • Quote

Post by kevstar31 » Sun Jan 24, 2010 7:38 pm

cach0rr0 wrote: far as the drivers the CD uses, a lspci -k should show it
it is a usb device

Code: Select all

# lsusb
Bus 001 Device 004: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
lsmod on livecd

Code: Select all

Module                  Size  Used by                                                                          
ipv6                  208560  16                                                                               
snd_seq_dummy           1584  0                                                                                
snd_seq_oss            20868  0                                                                                
snd_seq_midi_event      4084  1 snd_seq_oss                                                                    
snd_seq                34388  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event                                   
snd_seq_device          4432  3 snd_seq_dummy,snd_seq_oss,snd_seq                                              
snd_pcm_oss            28144  0                                                                                
snd_mixer_oss          10536  1 snd_pcm_oss                                                                    
i915                  158688  1                                                                                
drm                   106668  2 i915                                                                           
i2c_algo_bit            3992  1 i915                                                                           
rtl8187                42452  0                                                                                
mac80211              108988  1 rtl8187                                                                        
snd_hda_codec_realtek   156132  1                                                                              
uvcvideo               45632  0                                                                                
led_class               2644  1 rtl8187                                                                        
eeprom_93cx6            1304  1 rtl8187                                                                        
snd_hda_intel          17996  3                                                                                
snd_hda_codec          46920  2 snd_hda_codec_realtek,snd_hda_intel                                            
videodev               28064  1 uvcvideo                                                                       
v4l1_compat             9940  2 uvcvideo,videodev                                                              
snd_hwdep               5040  1 snd_hda_codec                                                                  
cfg80211               64160  2 rtl8187,mac80211                                                               
snd_pcm                48512  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec                                        
snd_timer              13624  2 snd_seq,snd_pcm                                                                
video                  14644  1 i915                                                                           
iTCO_wdt                7152  0
intel_agp              18952  1
i2c_i801                7020  0
snd                    36900  17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
iTCO_vendor_support     1912  1 iTCO_wdt
output                  1688  1 video
i2c_core               13860  5 i915,drm,i2c_algo_bit,videodev,i2c_i801
snd_page_alloc          6344  2 snd_hda_intel,snd_pcm
pcspkr                  1644  0
r8169                  22908  0
joydev                  7672  0
serio_raw               3716  0
ac                      2972  0
battery                 7920  0
tg3                    93964  0
e1000                 102088  0
dm_bbr                  9216  0
scsi_wait_scan          1048  0
sl811_hcd               9072  0
ohci_hcd               19244  0
uhci_hcd               18784  0
ehci_hcd               29596  0
sx8                    12944  0
imm                     8840  0
parport                30752  1 imm
pata_pcmcia            10688  0
pcmcia                 32152  1 pata_pcmcia

Code: Select all

*   Starting wpa_supplicant on wlan0 ...  
1264363647.308165: Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'                                                        
1264363647.308254: Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'                                                                            
1264363647.308274: Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'             
1264363647.308347: ctrl_interface='/var/run/wpa_supplicant'                                         
1264363647.308366: Line: 3 - start of a new network block                                           
1264363647.308394: ssid - hexdump_ascii(len=13):                                                    
     78 61 76 69 65 72 73 74 75 64 65 6e 74            xavierstudent                                
1264363647.308439: PSK (ASCII passphrase) - hexdump_ascii(len=13): [REMOVED]                        
1264363647.308459: proto: 0x1                                                                       
1264363647.308476: key_mgmt: 0x2                                                                    
1264363647.349699: PSK (from passphrase) - hexdump(len=32): [REMOVED]                               
1264363647.349843: Priority group 0                                                                 
1264363647.349861:    id=0 ssid='xavierstudent'                                                     
1264363647.349875: Initializing interface (2) 'wlan0'                                               
1264363647.350092: SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf                         
1264363647.350113:   capabilities: key_mgmt 0xf enc 0xf flags 0x0                                   
1264363647.352572: WEXT: Operstate: linkmode=1, operstate=5                                         
1264363647.354897: Own MAC address: 00:17:c4:91:bc:82                                               
1264363647.354937: wpa_driver_wext_set_wpa                                                          
1264363647.354973: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0            
1264363647.355022: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0            
1264363647.355153: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0            
1264363647.355198: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0            
1264363647.355238: wpa_driver_wext_set_countermeasures                                              
1264363647.355255: wpa_driver_wext_set_drop_unencrypted                                             
1264363647.355271: RSN: flushing PMKID list in the driver                                           
1264363647.355338: Setting scan request: 0 sec 100000 usec                                          
1264363647.357961: EAPOL: SUPP_PAE entering state DISCONNECTED                                      
1264363647.357993: EAPOL: KEY_RX entering state NO_KEY_RECEIVE                                      
1264363647.358009: EAPOL: SUPP_BE entering state INITIALIZE                                         
1264363647.358025: EAP: EAP entering state DISABLED                                                 
1264363647.360147: Added interface wlan0                                                            
1264363647.360196: Daemonize..                                                                [ ok ]
while(true) std::cout << "Jesus I trust in you." << std::endl;
My Political Compass
Top
kevstar31
Guru
Guru
User avatar
Posts: 449
Joined: Wed Nov 22, 2006 6:03 pm
Location: Ohio

  • Quote

Post by kevstar31 » Sat Jan 30, 2010 8:38 pm

I updated to the git kernel and now it just says Authentication with 00:00:00:00:00:00 timed out without CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys.
while(true) std::cout << "Jesus I trust in you." << std::endl;
My Political Compass
Top
Clad in Sky
l33t
l33t
User avatar
Posts: 900
Joined: Fri May 04, 2007 6:40 am
Location: Germany

  • Quote

Post by Clad in Sky » Sun Jan 31, 2010 12:27 pm

The driver is called rtl8187 and can be found in the kernel config (Device Drivers - Network Devices - Wireless or similar).
Works well here.

And cach0rr0 is right, WICD makes connecting so much easier.
Kali Ma
Now it's autumn of the aeons
Dance with your sword
Now it's time for the harvest
Top
yermandau
n00b
n00b
Posts: 6
Joined: Tue Nov 09, 2010 6:49 pm
Contact:
Contact yermandau
Website

  • Quote

Post by yermandau » Tue Nov 09, 2010 6:59 pm

Clad in Sky wrote:The driver is called rtl8187 and can be found in the kernel config (Device Drivers - Network Devices - Wireless or similar).
Works well here.

And cach0rr0 is right, WICD makes connecting so much easier.
i have the some card and the same problems that kevstar31

Clad in Sky, can you post your lsusb -vvv

Please tell us how you did it to connect, I tried several different ways to different forms, 4 mounths trying ...

:roll:
yermandu
Top
diablo465
Apprentice
Apprentice
Posts: 194
Joined: Tue Sep 10, 2013 11:00 am

  • Quote

Post by diablo465 » Tue Jun 10, 2014 10:45 am

I still have the same problem, anyone who have sort this out please shed some light. thanks very much..
Top
khayyam
Watchman
Watchman
User avatar
Posts: 6227
Joined: Thu Jun 07, 2012 2:45 am
Location: Room 101

  • Quote

Post by khayyam » Tue Jun 10, 2014 11:46 am

diablo465 wrote:I still have the same problem, anyone who have sort this out please shed some light. thanks very much..
diablo465 ... given the age of this thread, and the nature of the problem, it may not be the "same". Having no corrolative data also doesn't help ... you should probably start a new thread with the following:

The AP data ...

Code: Select all

# awk '{RS="Cell"}/NAME_OF_AP/' <(iwlist <interface_name> scan)
The wpa_supplicant.conf (sans 'psk'), the relevant sections of /etc/conf.d/net, the card/driver in use (and the section of dmesg when the card/driver is registered/loaded), kernel, driver, firmware, and wpa_supplicant versions, wpa_supplicant.log aquired via the '-d -f' switches, eg:

/etc/conf.d/net

Code: Select all

wpa_supplicant_wlan0="-Dnl80211 -d -f /var/log/wpa_supplicant.log"
You might also pastebin your kernel .config or post the relevant sections relating the the driver ...

best ... khay
Top
Post Reply

13 posts • Page 1 of 1

Return to “Networking & Security”

Jump to
  • Assistance
  • ↳   News & Announcements
  • ↳   Frequently Asked Questions
  • ↳   Installing Gentoo
  • ↳   Multimedia
  • ↳   Desktop Environments
  • ↳   Networking & Security
  • ↳   Kernel & Hardware
  • ↳   Portage & Programming
  • ↳   Gamers & Players
  • ↳   Other Things Gentoo
  • ↳   Unsupported Software
  • Discussion & Documentation
  • ↳   Documentation, Tips & Tricks
  • ↳   Gentoo Chat
  • ↳   Gentoo Forums Feedback
  • ↳   Duplicate Threads
  • International Gentoo Users
  • ↳   中文 (Chinese)
  • ↳   Dutch
  • ↳   Finnish
  • ↳   French
  • ↳   Deutsches Forum (German)
  • ↳   Diskussionsforum
  • ↳   Deutsche Dokumentation
  • ↳   Greek
  • ↳   Forum italiano (Italian)
  • ↳   Forum di discussione italiano
  • ↳   Risorse italiane (documentazione e tools)
  • ↳   Polskie forum (Polish)
  • ↳   Instalacja i sprzęt
  • ↳   Polish OTW
  • ↳   Portuguese
  • ↳   Documentação, Ferramentas e Dicas
  • ↳   Russian
  • ↳   Scandinavian
  • ↳   Spanish
  • ↳   Other Languages
  • Architectures & Platforms
  • ↳   Gentoo on ARM
  • ↳   Gentoo on PPC
  • ↳   Gentoo on Sparc
  • ↳   Gentoo on Alternative Architectures
  • ↳   Gentoo on AMD64
  • ↳   Gentoo for Mac OS X (Portage for Mac OS X)
  • Board index
  • All times are UTC
  • Delete cookies

© 2001–2026 Gentoo Foundation, Inc.

Powered by phpBB® Forum Software © phpBB Limited

Privacy Policy

 

 

magic