SCSI issue, lost interrupt hdc, slow boot process

[cirrus]

Hi folks,


Just installed the complete Gentoo thing again because my 3Ware-IDE-RAID controller and the ide-scsi emulation didn't cope another.. I installed completely from the beginning using initrd.

OK, now the scsi modules are loaded in the right sequence so that all devices are recognized. But the system is very very slow at the beginning.

Here is what dmesg says:

bash-2.05b$ dmesg
t 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3985, scsi0, channel 0, id 0, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 3985) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3986, scsi0, channel 0, id 0, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 3986) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3987, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3988, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 3988) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3989, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
SCSI host 0 abort (pid 3989) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3990, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdc: lost interrupt
sr0: scsi3-mmc drive: 263x/0x cartridge changer
scsi : aborting command due to timeout : pid 3991, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbd) 00 00 00 00 00 00 00 00 08 00 00
hdc: lost interrupt
scsi : aborting command due to timeout : pid 3991, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbd) 00 00 00 00 00 00 00 00 08 00 00
SCSI host 0 abort (pid 3991) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 4000, scsi0, channel 0, id 0, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdc: lost interrupt
scsi : aborting command due to timeout : pid 4007, scsi0, channel 0, id 0, lun 0 UNKNOWN(0x46) 00 00 00 00 00 00 00 08 00
hdc: lost interrupt
sr0: mmc-3 profile capable, current profile: 0h
scsi : aborting command due to timeout : pid 4012, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4020, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 4020) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 4021, scsi0, channel 0, id 1, lun 0 Mode Sense (10) 00 2a 00 00 00 00 00 18 00
SCSI host 0 abort (pid 4021) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: lost interrupt
scsi : aborting command due to timeout : pid 4031, scsi0, channel 0, id 1, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
hdd: lost interrupt
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
scsi : aborting command due to timeout : pid 4032, scsi0, channel 0, id 1, lun 0 UNKNOWN(0x46) 00 00 00 00 00 00 00 08 00
hdd: lost interrupt
hdd: lost interrupt
sr1: mmc-3 profile capable, current profile: 0h
bash-2.05b


I thinks that's the problem, but what can I do?


I load the following scsi-modules during boot in order:

scsi_mod
sd_mod
ide_scsi
3w-xxxx

the last two must be loaded in this order otherwise the ide-scsi emulation don't start at all.


Thanks for help,
Karsten.

[hbmartin]

What kernel are you using?

Harold

[cirrus]

I use Kernel 2.4.20-r8, XFree 4.3.99.14 , KDE 3.1.4

NVidia GF4-Ti4200
Athlon XP - 1800
3Ware RAID , 2x160GB Samsung
SBLive
K7S5APro

[cirrus]

Here's my Grub-Conf:

default 0
timeout 8
splashimage=(hd0,8)/boot/grub/splash.xpm.gz

title=Gentoo Linux mit Kernel 2.4.20 auf 3Ware RAID0
root (hd0,8)
kernel (hd0,8)/boot/bzImage root=/dev/sda11 apm=off hda=ide-cd hdc=ide-scsi hdd=ide-scsi
initrd (hd0,8)/boot/initrd

title=Windows XP auf 3Ware RAID0
root (hd0,0)
chainloader (hd0,0)+1

Initrd:

Includes the modules:
scsi_mod
sd_mod
ide-scsi
3w-xxxx

loading in this order.

[cirrus]

Any help here?
Thanks.

[cirrus]

Problem SOLVED !


It was no kernel problem, no module problem, no initrd problem - it was APIC !

The 3Ware Controller and the mobo's ide-controller together did't cope with APIC. I disabled it with the "noapic" option in grub.conf and now everything is fine!

Thanks for your help,
Karsten.