Information of kernel config (using genkernel):
some lines of .config:
Code: Select all
[...]
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
# CONFIG_SCx200_ACB is not set
[...]Code: Select all
[...]
i686-pc-linux-gnu-gcc -M -MG -I. -Ikernel/include -I/usr/src/linux/include -DSYSFS_SUPPORT -fpic -D_REENTRANT -Wall -O2 -O2 -march=k8 -fomit-frame-pointer -pipe -mmmx -msse -msse2 -m3dnow lib/general.c | \
sed -e 's@^\(.*\)\.o:@lib/general.ld lib/general.lo: Makefile '`dirname lib/general.ld`/Module.mk' @' > lib/general.ld
i686-pc-linux-gnu-gcc -M -MG -I. -Ikernel/include -I/usr/src/linux/include -DSYSFS_SUPPORT -fpic -D_REENTRANT -Wall -O2 -O2 -march=k8 -fomit-frame-pointer -pipe -mmmx -msse -msse2 -m3dnow lib/data.c | \
sed -e 's@^\(.*\)\.o:@lib/data.ld lib/data.lo: Makefile '`dirname lib/data.ld`/Module.mk' @' > lib/data.ld
( grep 'SENSORS SYSCTL START' /dev/null kernel/chips/*.c | \
sed -e 's/:.*//' -e 's#^#kernel/include/sensors.h: #' ) > kernel/include/sensors.hd
make: *** Keine Regel vorhanden, um das Target »asm/bitsperlong.h«,
benötigt von »prog/sensord/sensord.rd«, zu erstellen. Schluss.
*
* ERROR: sys-apps/lm_sensors-2.10.7 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3465: Called die
* The specific snippet of code:
* emake CC=$(tc-getCC) LINUX=${KV_DIR} I2C_HEADERS=${KV_DIR}/include user || die "emake user failed"
* The die message:
* emake user failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/sys-apps/lm_sensors-2.10.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/lm_sensors-2.10.7/temp/environment'.
*
* Messages for package sys-apps/lm_sensors-2.10.7:
*
* ERROR: sys-apps/lm_sensors-2.10.7 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3465: Called die
* The specific snippet of code:
* emake CC=$(tc-getCC) LINUX=${KV_DIR} I2C_HEADERS=${KV_DIR}/include user || die "emake user failed"
* The die message:
* emake user failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/sys-apps/lm_sensors-2.10.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/lm_sensors-2.10.7/temp/environment'.
Code: Select all
Portage 2.1.6.13 (default/linux/x86/10.0/desktop, gcc-4.3.4, glibc-2.9_p20081201-r2, 2.6.31-gentoo-r6 i686)
=================================================================
System uname: Linux-2.6.31-gentoo-r6-i686-AMD_Athlon-tm-_64_Processor_3200+-with-gentoo-1.12.13
Timestamp of tree: Sat, 09 Jan 2010 18:15:01 +0000
distcc 3.1 i686-pc-linux-gnu [disabled]
ccache version 2.4 [enabled]
app-shells/bash: 4.0_p35
dev-java/java-config: 2.1.9-r2
dev-lang/python: 2.6.4
dev-util/ccache: 2.4-r7
dev-util/cmake: 2.6.4-r3
sys-apps/baselayout: 1.12.13
sys-apps/sandbox: 1.6-r2
sys-devel/autoconf: 2.13, 2.63-r1
sys-devel/automake: 1.9.6-r2, 1.10.2
sys-devel/binutils: 2.18-r3
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6b
virtual/os-headers: 2.6.27-r2
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=k8 -fomit-frame-pointer -pipe -mmmx -msse -msse2 -m3dnow"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=k8 -fomit-frame-pointer -pipe -mmmx -msse -msse2 -m3dnow"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ ftp://de-mirror.org/distro/gentoo/ ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo ftp://ftp.ipv6.uni-muenster.de/pub/linux/distributions/gentoo "
LANG="de_DE.UTF-8"
LDFLAGS="-Wl,-O1"
LINGUAS="de"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext X a52 aac acl acpi ahci alsa amd apm avahi berkdb bluetooth branding bzip2 cairo cdda cddb cdr cli consolekit coolandquiet cpufreq cracklib crypt cups cupsd custom-optimization cxx dbus dhcpd dri dts dvb dvd dvdr dvdrw eds emboss encode evo exif fam firefox flac fortran fuse gdbm gif gnome gnome-keyring gphoto2 gpm gstreamer gtk gtk2 hal hddtemp hdparm httpd iconv id3tag ipv6 java jpeg jpeg2k ldap libass libnotify lirc live lm_sensors lua lzma mad matroska mikmod mmx mng modules mp3 mp4 mpeg mudflap mysql nautilus ncurses networkmanager nfs nls nptl nptlonly nsplugin nvida nvidia ogg opengl openmp pam pcre pdf perl png policykit ppds pppd python qt3support quicktime readline reflection remoteosd samba sata schroedinger sdl sensord session sis skins smb speekx spell spl sse sse2 ssl startup-notification stream svg sysfs syslog taglib tcpd theora thunar tiff truetype twolame unicode upnp usb vcdinfo vcdx vlm vorbis win32codecs x264 x86 xbc xinerama xml xorg xosd xulrunner xv xvid xvmc zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="de" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="apm nv nvidia"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LC_ALL, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAYUsed CPU: AMD64 3200+ (K8) @2000Mhz, 32bit gentoo
What can I do?[/i]
