Regards to the kded4 using 100% CPU I had the same problem, however after rebuilding kdelibs, pykde and all plasma stuff, the problem disappeared. Since kded4 is part of kdelibs, I think rebuilding kdelibs would suffice.Hwoarang wrote:Thanks for reporting this issue. I ll take a look as soon as possible
I am affraid I cant answer your question about kde4+100% cpu. You should ask guys on kde-testing topic -> http://forums.gentoo.org/viewtopic-t-722264.html
Code: Select all
/var/tmp/portage/x11-libs/qt-core-4.5.9999/work/qt-x11-opensource-src-4.5.9999/doc/src/examples/svgalib.qdoc:133: Unexpected '\snippet (//! [0])'
Could you please provide more details about that?drizzt wrote:Hello,
I just stumbled over this overlay and thought to give it a try. 2 things came up:
- qt-qt3support-4.5.0_rc1 doesn't compile with phonon use flag, because phonon use flags implies gstreamer and this one isn't found although I installed it to test
Hello,Hwoarang wrote:Could you please provide more details about that?drizzt wrote:Hello,
I just stumbled over this overlay and thought to give it a try. 2 things came up:
- qt-qt3support-4.5.0_rc1 doesn't compile with phonon use flag, because phonon use flags implies gstreamer and this one isn't found although I installed it to test
Give us an error log, and tell us if you use qt-phonon or media-sound phonon
Code: Select all
* media-sound/phonon
Latest version available: 4.3.0
Latest version installed: 4.3.0
Size of files: 552 kB
Homepage: http://phonon.kde.org
Description: KDE multimedia API
License: LGPL-2.1Code: Select all
>>> Emerging (1 of 1) x11-libs/qt-qt3support-4.5.0_rc1 from qting-edge
* qt-x11-opensource-src-4.5.0-rc1.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* The 4.5.0_rc1 version ebuilds install a pre-release from Nokia Qt Software
>>> Unpacking source...
tar xjpf /var/tmp/portage/x11-libs/qt-qt3support-4.5.0_rc1/distdir/qt-x11-opensource-src-4.5.0-rc1.tar.bz2 qt-x11-opensource-src-4.5.0-rc1/configure qt-x11-opensource-src-4.5.0-rc1/LICENSE.GPL2 qt-x11-opensource-src-4.5.0-rc1/LICENSE.GPL3 qt-x11-opensource-src-4.5.0-rc1/projects.pro qt-x11-opensource-src-4.5.0-rc1/src/qbase.pri qt-x11-opensource-src-4.5.0-rc1/src/qt_targets.pri qt-x11-opensource-src-4.5.0-rc1/src/qt_install.pri qt-x11-opensource-src-4.5.0-rc1/bin qt-x11-opensource-src-4.5.0-rc1/config.tests qt-x11-opensource-src-4.5.0-rc1/mkspecs qt-x11-opensource-src-4.5.0-rc1/qmake qt-x11-opensource-src-4.5.0-rc1/src/qt3support qt-x11-opensource-src-4.5.0-rc1/src/tools/uic3 qt-x11-opensource-src-4.5.0-rc1/tools/designer/src/plugins/widgets qt-x11-opensource-src-4.5.0-rc1/tools/qtconfig qt-x11-opensource-src-4.5.0-rc1/tools/porting qt-x11-opensource-src-4.5.0-rc1/src/ qt-x11-opensource-src-4.5.0-rc1/include/ qt-x11-opensource-src-4.5.0-rc1/tools/
>>> Source unpacked in /var/tmp/portage/x11-libs/qt-qt3support-4.5.0_rc1/work
>>> Configuring source in /var/tmp/portage/x11-libs/qt-qt3support-4.5.0_rc1/work/qt-x11-opensource-src-4.5.0-rc1 ...
./configure -L/usr/lib64 -pch -release -no-separate-debug-info -arch x86_64 -stl -verbose -largefile -confirm-license -no-rpath -prefix /usr -bindir /usr/bin -libdir /usr/lib64/qt4 -datadir /usr/share/qt4 -docdir /usr/share/doc/qt-4.5.0_rc1 -headerdir /usr/include/qt4 -plugindir /usr/lib64/qt4/plugins -sysconfdir /etc/qt4 -translationdir /usr/share/qt4/translations -examplesdir /usr/share/qt4/examples -demosdir /usr/share/qt4/demos -silent -fast -no-exceptions -reduce-relocations -nomake examples -nomake demos -qt3support -gstreamer -phonon -accessibility
This is the Qt/X11 Open Source Edition.
Determining system architecture... (Linux:2.6.28-gentoo-r1:x86_64)
64-bit AMD 80x86 (x86_64)
'x86_64' is supported
System architecture: 'x86_64'
Symbol visibility control enabled.
Symbolic function binding enabled.
You are licensed to use this software under the terms of
the GNU General Public License (GPL) versions 2 or 3.
You have already accepted the terms of the license.
floatmath auto-detection... ()
compiling floatmath.cpp
floatmath.cpp:3: Warnung: unbenutzter Parameter »argc«
floatmath.cpp:3: Warnung: unbenutzter Parameter »argv«
linking floatmath
floatmath enabled.
mmx auto-detection... ()
compiling mmx.cpp
linking mmx
mmx enabled.
3dnow auto-detection... ()
compiling 3dnow.cpp
linking 3dnow
3dnow enabled.
sse auto-detection... ()
compiling sse.cpp
linking sse
sse enabled.
sse2 auto-detection... ()
compiling sse2.cpp
linking sse2
sse2 enabled.
zlib auto-detection... ()
compiling zlib.cpp
linking zlib
zlib enabled.
libjpeg auto-detection... ()
compiling libjpeg.cpp
libjpeg.cpp: In function »int main(int, char**)«:
libjpeg.cpp:10: Warnung: »cinfo« wird in dieser Funktion uninitialisiert verwendet
linking libjpeg
libjpeg enabled.
libtiff auto-detection... ()
compiling libtiff.cpp
linking libtiff
libtiff enabled.
libmng auto-detection... ()
compiling libmng.cpp
linking libmng
libmng enabled.
libpng auto-detection... ()
compiling libpng.cpp
linking libpng
libpng enabled.
InterBase auto-detection... ()
compiling ibase.cpp
ibase.cpp:1:19: Fehler: ibase.h: Datei oder Verzeichnis nicht gefunden
make: *** [ibase.o] Fehler 1
InterBase disabled.
MySQL (thread-safe) auto-detection... ()
compiling ../mysql/mysql.cpp
linking mysql_r
MySQL (thread-safe) enabled.
ODBC auto-detection... ()
compiling odbc.cpp
linking odbc
ODBC enabled.
PostgreSQL auto-detection... ()
compiling psql.cpp
psql.cpp:1:22: Fehler: libpq-fe.h: Datei oder Verzeichnis nicht gefunden
psql.cpp: In function »int main(int, char**)«:
psql.cpp:5: Fehler: »PQescapeBytea« wurde in diesem Gültigkeitsbereich nicht definiert
psql.cpp:6: Fehler: »PQunescapeBytea« wurde in diesem Gültigkeitsbereich nicht definiert
make: *** [psql.o] Fehler 1
PostgreSQL disabled.
SQLite2 auto-detection... ()
compiling sqlite2.cpp
linking sqlite2
SQLite2 enabled.
NIS auto-detection... ()
compiling nis.cpp
linking nis
NIS enabled.
Cups auto-detection... ()
compiling cups.cpp
linking cups
Cups enabled.
POSIX iconv auto-detection... ()
compiling iconv.cpp
linking iconv
POSIX iconv enabled.
D-Bus auto-detection... ()
compiling dbus.cpp
linking dbus
D-Bus enabled.
Glib auto-detection... ()
compiling glib.cpp
glib.cpp: In function »int main(int, char**)«:
glib.cpp:14: Warnung: »pollfd« wird in dieser Funktion uninitialisiert verwendet
linking glib
Glib enabled.
GStreamer auto-detection... ()
compiling gstreamer.cpp
gstreamer.cpp:1:21: Fehler: gst/gst.h: Datei oder Verzeichnis nicht gefunden
gstreamer.cpp:2:42: Fehler: gst/interfaces/propertyprobe.h: Datei oder Verzeichnis nicht gefunden
gstreamer.cpp:3:37: Fehler: gst/interfaces/xoverlay.h: Datei oder Verzeichnis nicht gefunden
gstreamer.cpp:7:4: Fehler: #error "No GST_VERSION_* macros"
gstreamer.cpp:12: Warnung: unbenutzter Parameter »argc«
gstreamer.cpp:12: Warnung: unbenutzter Parameter »argv«
make: *** [gstreamer.o] Fehler 1
GStreamer disabled.
Gstreamer support cannot be enabled due to functionality tests!
Turn on verbose messaging (-v) to ./configure to see the final report.
If you believe this message is in error you may use the continue
switch (-continue) to ./configure to continue.Code: Select all
[ebuild R ] media-libs/gstreamer-0.10.21-r3 USE="nls -debug -test" 0 kB
drizzt wrote:Now after layman sync, qt-qt3support wants to pull in qt-phonon-4.5.0_rc1 which blocks media-sound/phonon. media-sound/phonon is required for kdelibs-4.2
Code: Select all
PDEPEND="phonon? (
|| ( ~x11-libs/qt-phonon-${PV}[debug=] media-sound/phonon[gstreamer] ) )"
I have USE="-gstreamer" and I'm using the xine backend instead. I'm getting the same blockage. Does this mean I have to re-emerge media-sound/phonon with gstreamer on?yngwin wrote:drizzt wrote:Now after layman sync, qt-qt3support wants to pull in qt-phonon-4.5.0_rc1 which blocks media-sound/phonon. media-sound/phonon is required for kdelibs-4.2Means it needs one or the other, if USE=phonon is set.Code: Select all
PDEPEND="phonon? ( || ( ~x11-libs/qt-phonon-${PV}[debug=] media-sound/phonon[gstreamer] ) )"
You have these choices:StringCheesian wrote:I have USE="-gstreamer" and I'm using the xine backend instead. I'm getting the same blockage. Does this mean I have to re-emerge media-sound/phonon with gstreamer on?
No. It's there for a reason. You can only get phonon support in Qt by using gstreamer.Would it work if I modified the ebuild to avoid gstreamer?
Code: Select all
-> emerge -v qt-creator
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] dev-util/qt-creator-9999 USE="-debug" 0 kB [1]
Total: 1 package (1 reinstall), Size of downloads: 0 kB
Portage tree and overlays:
[0] /usr/portage
[1] /usr/portage/local/layman/qting-edge
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) dev-util/qt-creator-9999
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
>>> Unpacking source...
* git update start -->
* repository: git://labs.trolltech.com/qt-creator
* local clone: /usr/portage/distfiles/git-src/qt-creator
* committish: master
>>> Unpacked to /var/tmp/portage/dev-util/qt-creator-9999/work/qt-creator-9999
>>> Source unpacked.
* Applying fix_headers_git.patch ...
* Failed Patch: fix_headers_git.patch !
* ( /usr/portage/local/layman/qting-edge/dev-util/qt-creator/files/fix_headers_git.patch )
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/dev-util/qt-creator-9999/temp/fix_headers_git.patch-19607.out
*
* ERROR: dev-util/qt-creator-9999 failed.
* Call stack:
* ebuild.sh, line 49: Called src_prepare
* environment, line 2481: Called qt4-edge_src_prepare
* environment, line 2426: Called base_src_prepare
* environment, line 266: Called base_src_util 'autopatch'
* environment, line 315: Called epatch '/usr/portage/local/layman/qting-edge/dev-util/qt-creator/files/fix_headers_git.patch'
* environment, line 1300: Called die
* The specific snippet of code:
* die "Failed Patch: ${patchname}!";
* The die message:
* Failed Patch: fix_headers_git.patch!
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/qt-creator-9999/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-util/qt-creator-9999/temp/environment'.
* It's very interesting - I ran into a similar problem. My fonts turned completely unreadable. Changing the hinting style did not help. But I fixed the issue by changing subpixel rendering from 'Vertical RGB' to 'RGB'. Do you think, we should file a bug? If so, where do I go: Gentoo, KDE, Nokia?no4b wrote:This problem is easy to solve. I changed hinting style from medium to slight and everything looks good again.no4b wrote:I tried Qt-4.5.0_rc1 from overlay and fonts look much worse compared to Qt-4.2.2 from portage. They are thin. Have you noticed something similar?
Well, khtml will work fine with flash, and is the same codebase as webkit, so it's pretty fast. You can also use kmplayer with npp to handle flash plugins, qt4.5 is supposed to have flash working in webkit though, without any hacks. And it does work for me. Check file assosiations for shockwave flash.gringo wrote:sorry if i´m going to say sth. stupid but i installed qt-4.5.0-r1 because i thought i had read somewhere that nsplugin support was there already.
All i need is a browser that knows what flash is, so i tried arora from your overlay and it apparently doesn´t work.
What am i doing wrong ? or am i using the wrong version ?
thanks in advance for any advice !
excuse my ignorance but where exactly do i look this up ? to be honest i haven´t digged into it seriously ... yet ...Check file assosiations for shockwave flash.
That'd be a kde setting, kcontrol panel -> advanced -> file assosiations, but I doubt that'd affect arora/midori. I just tested arora, and it works fine on my system, with flash. That's qt4.5 rc1 and latest flash from portage. Keep in mind if you've got an old running system that they might not check .mozilla/plugins for the flash plugin.gringo wrote:thanks for your answer neuron !
i´ve been using arora/midori for quite some time now ( but don´t use gnome or kde) and they worked quite well for me so far, specially arora looks more robust to me.
I just wanted to see how well the flash stuff works using one of these but I´m unable to get latest gtk-webkit stuff to compile so that i checked out latest arora.
excuse my ignorance but where exactly do i look this up ? to be honest i haven´t digged into it seriously ... yet ...Check file assosiations for shockwave flash.
thanks !
