xf86-video-ati X1400 NO DRI [SOLVED]

Message

lordkur · Post by **lordkur** » Sun Jan 11, 2009 10:32 pm

Hello Friends:

I am trying to move from the closed sources ati drivers to the new fresh xf86-video-ati . Til now X starts , I can log in, work , but no dri.

Code: Select all

e ~ # glxgears
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual

Code: Select all

e ~ # glxinfo
name of display: :0.0
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Segmentation fault

This is my xorg.conf

Code: Select all

cat /etc/X11/xorg.conf              
Section "ServerLayout"                            
        Identifier     "aticonfig-Layout[all]"    
        Screen 0       "aticonfig-Screen[0]" 0 0  
        #InputDevice    "Synaptics Touchpad" "AlwaysCore"
        Option          "AIGLX" "True"                   
EndSection                                               


Section "Module"
        Load  "ddc"
        Load  "vbe"
        Load  "GLcore"
        Load  "dbe"   
        Load  "dri"   
        Load  "extmod"
        Load  "glx"   
        Load  "bitmap"
        Load  "record"
        #Load  "xtrap"
        Load  "freetype"
        #Load  "type1"  
EndSection              


Section "InputDevice"
        Identifier  "Synaptics Touchpad"
        Driver      "synaptics"         
        Option      "CorePointer"       
        Option      "SendCoreEvents"    
        Option      "Device" "/dev/input/mouse0"
        Option      "Protocol" "auto-dev"       
        Option      "ZAxisMapping" "4 5 6 7"    
        Option      "HorizScrollDelta" "0"      
        Option      "SHMConfig" "1"             
        Option      "Emulate3Buttons" "true"    
EndSection                                      

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"                              
        Option      "ReducedBlanking"                          
EndSection                                                     

Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "ati"                
        Option      "XAANoOffscreenPixmaps" "true"
        Option      "TexturedXrender" "true"
        Option      "DRI" "true"
        #Option      "AGPMode" "4"
        #Option             "ColorTiling" "on"
        #Option             "AccelMethod" "EXA"
        #Option             "EnablePageFlip" "on"
        #Option             "AGPFastWrite" "yes"
        VendorName  "ATI Corp."
        BoardName   "X1400"
EndSection


Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
        #Group       "video"
        Mode         0666
EndSection


Section "Extensions"
        #Option     "XVideo" "enable"
        #Option "Composite" "enable"
EndSection

kernel

Code: Select all

# CONFIG_SONYPI is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
#CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m

Code: Select all

linux # lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
03:01.2 System peripheral: Ricoh Co Ltd Device 0843 (rev 01)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

Modules autoload

Code: Select all

 cat /etc/modules.autoload.d/kernel-2.6
#ieee80211_crypt_ccmp
#ieee80211_crypt_tkip
#ieee80211_crypt_wep
#deflate
arc4
sha512
sha256
sha1
md5
wp512
ieee80211
ieee80211_crypt
ieee80211_crypt_wep
ieee80211_crypt_tkip
ppp_generic
ppp_async
vboxdrv
radeon
#ipw3945
snd-hda-intel model=ref

I am checking my logs and I have this Xorg.0.log

Code: Select all

(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "extmod"

Am I working the right way? Any suggestion to see whats going on?

lordkur · Post by **lordkur** » Wed Jan 14, 2009 7:03 pm

No one?

96140 · Post by **96140** » Wed Jan 14, 2009 7:25 pm

lordkur · Post by **lordkur** » Wed Jan 14, 2009 8:07 pm

nightmorph wrote:Did you follow the DRI Guide? Did you remember to build xorg-server with the dri USE flag (if using xorg-server 1.3, the stable version)?

Hi friend!

Well, I just Followed that guide indeed. Actually this is the output of : equery uses xorg-server

Code: Select all

~ # equery uses xorg-server
[ Searching for packages matching xorg-server... ]
[ Colour Code : set unset ]                       
[ Legend : Left column  (U) - USE flags from make.conf              ]
[        : Right column (I) - USE flags packages was installed with ]
[ Found these USE variables for x11-base/xorg-server-1.4.0.90-r3 ]   
 U I                                                                 
 + + 3dfx                      : Enable support for Voodoo chipsets, also called as 3DFX and TDFX
 - - debug                     : Enable extra debug codepaths, like asserts and extra output. If you want to get meaningful backtraces see http://www.gentoo.org/proj/en/qa/backtraces.xml                                                                                                                                
 - - dmx                       : Build the Distributed Multiheaded X server                                                                                  
 + + dri                       : Enable direct rendering: used for accelerated 3D and some 2D, like DMA                                                      
 + + hal                       : Enable Hardware Abstraction Layer (HAL) support                                                                             
 - - input_devices_acecad      : <unknown>                                                                                                                   
 - - input_devices_aiptek      : <unknown>                                                                                                                   
 - - input_devices_calcomp     : <unknown>                                                                                                                   
 - - input_devices_citron      : <unknown>                                                                                                                   
 - - input_devices_digitaledge : <unknown>                                                                                                                   
 - - input_devices_dmc         : <unknown>                                                                                                                   
 - - input_devices_dynapro     : <unknown>                                                                                                                   
 - - input_devices_elo2300     : <unknown>                                                                                                                   
 - - input_devices_elographics : <unknown>                                                                                                                   
 - - input_devices_evdev       : <unknown>                                                                                                                   
 - - input_devices_fpit        : <unknown>                                                                                                                   
 - - input_devices_hyperpen    : <unknown>                                                                                                                   
 - - input_devices_jamstudio   : <unknown>                                                                                                                   
 - - input_devices_joystick    : <unknown>                                                                                                                   
 + + input_devices_keyboard    : <unknown>                                                                                                                   
 - - input_devices_magellan    : <unknown>                                                                                                                   
 - - input_devices_microtouch  : <unknown>                                                                                                                   
 + + input_devices_mouse       : <unknown>                                                                                                                   
 - - input_devices_mutouch     : <unknown>                                                                                                                   
 - - input_devices_palmax      : <unknown>                                                                                                                   
 - - input_devices_penmount    : <unknown>                                                                                                                   
 - - input_devices_spaceorb    : <unknown>                                                                                                                   
 - - input_devices_summa       : <unknown>                                                                                                                   
 + + input_devices_synaptics   : <unknown>                                                                                                                   
 - - input_devices_tek4957     : <unknown>                                                                                                                   
 - - input_devices_ur98        : <unknown>                                                                                                                   
 - - input_devices_vmmouse     : <unknown>                                                                                                                   
 - - input_devices_void        : <unknown>                                                                                                                   
 - - input_devices_wacom       : <unknown>                                                                                                                   
 - - ipv6                      : Adds support for IP version 6                                                                                               
 - - kdrive                    : Build the kdrive X servers                                                                                                  
 - - minimal                   : Install a very minimal build (disables, for example, plugins, fonts, most drivers, non-critical features)                   
 - - nptl                      : Enable support for Native POSIX Threads Library, the new threading module (requires linux-2.6 or better usually)            
 - - sdl                       : Adds support for Simple Direct Layer (media library)                                                                        
 - - video_cards_apm           : <unknown>                                                                                                                   
 - - video_cards_ark           : <unknown>                                                                                                                   
 - - video_cards_chips         : <unknown>                                                                                                                   
 - - video_cards_cirrus        : <unknown>                                                                                                                   
 - - video_cards_cyrix         : <unknown>                                                                                                                   
 - - video_cards_dummy         : <unknown>                                                                                                                   
 - - video_cards_epson         : <unknown>                                                                                                                   
 - - video_cards_fbdev         : <unknown>                                                                                                                   
 - + video_cards_fglrx         : <unknown>                                                                                                                   
 - - video_cards_geode         : <unknown>                                                                                                                   
 - - video_cards_glint         : <unknown>                                                                                                                   
 - - video_cards_i128          : <unknown>                                                                                                                   
 - - video_cards_i740          : <unknown>                                                                                                                   
 - - video_cards_i810          : <unknown>                                                                                                                   
 - - video_cards_impact        : <unknown>                                                                                                                   
 - - video_cards_imstt         : <unknown>                                                                                                                   
 - - video_cards_mach64        : <unknown>                                                                                                                   
 - - video_cards_mga           : <unknown>                                                                                                                   
 - - video_cards_neomagic      : <unknown>                                                                                                                   
 - - video_cards_newport       : <unknown>
 - - video_cards_nsc           : <unknown>
 - - video_cards_nv            : <unknown>
 - - video_cards_nvidia        : <unknown>
 - - video_cards_r128          : <unknown>
 + + video_cards_radeon        : <unknown>
 - - video_cards_rendition     : <unknown>
 - - video_cards_s3            : <unknown>
 - - video_cards_s3virge       : <unknown>
 - - video_cards_savage        : <unknown>
 - - video_cards_siliconmotion : <unknown>
 - - video_cards_sis           : <unknown>
 - - video_cards_sisusb        : <unknown>
 - - video_cards_sunbw2        : <unknown>
 - - video_cards_suncg14       : <unknown>
 - - video_cards_suncg3        : <unknown>
 - - video_cards_suncg6        : <unknown>
 - - video_cards_sunffb        : <unknown>
 - - video_cards_sunleo        : <unknown>
 - - video_cards_suntcx        : <unknown>
 - - video_cards_tdfx          : <unknown>
 - - video_cards_tga           : <unknown>
 - - video_cards_trident       : <unknown>
 - - video_cards_tseng         : <unknown>
 - - video_cards_v4l           : <unknown>
 - - video_cards_vermilion     : <unknown>
 - - video_cards_vesa          : <unknown>
 - - video_cards_vga           : <unknown>
 - - video_cards_via           : <unknown>
 - - video_cards_vmware        : <unknown>
 - - video_cards_voodoo        : <unknown>
 - - video_cards_xgi           : <unknown>
 + + xorg                      : Build the Xorg X server (HIGHLY RECOMMENDED)
 - - xprint                    : Support for xprint, http://www.mozilla.org/projects/xprint/

I have this version installed: x11-base/xorg-server-1.4.0.90-r3

Thanks for ur help!

lordkur · Post by **lordkur** » Thu Jan 29, 2009 4:23 pm

Anyone??

shrimp123 · Post by **shrimp123** » Sat Jan 31, 2009 9:36 am

same problem here. no dri. no glx.

S

lordkur · Post by **lordkur** » Mon Feb 02, 2009 9:05 pm

shrimp123 wrote:same problem here. no dri. no glx.

S

And You know whats worst, I just it on a Linux Mint liveCD and got it ALL working while I was using the livecd...

iGentoo900 · Post by **iGentoo900** » Mon Feb 02, 2009 11:59 pm

lordkur wrote:
shrimp123 wrote:same problem here. no dri. no glx.

S
And You know whats worst, I just it on a Linux Mint liveCD and got it ALL working while I was using the livecd...

Do you have the "dri" USE flag? Did you enable DRI support in your kernel?

lordkur · Post by **lordkur** » Tue Feb 03, 2009 4:34 am

iGentoo900 wrote:
lordkur wrote:
shrimp123 wrote:same problem here. no dri. no glx.

S
And You know whats worst, I just it on a Linux Mint liveCD and got it ALL working while I was using the livecd...

Do you have the "dri" USE flag? Did you enable DRI support in your kernel?

I have the dri USE flag On. This is what I got on my kernel

CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

Do I need anything else?

Thanks

fuzzythebear · Post by **fuzzythebear** » Tue Feb 03, 2009 11:25 am

you mention driver ati
how about changing that to radeon ?
your chip family might help .. if it's anywhere above or equal to r5XX family
i suggest you take a look at radeonhd.

If one don't work : try another is my motto.

Good day

lordkur · Post by **lordkur** » Tue Feb 03, 2009 2:39 pm

fuzzythebear wrote:you mention driver ati
how about changing that to radeon ?
your chip family might help .. if it's anywhere above or equal to r5XX family
i suggest you take a look at radeonhd.

If one don't work : try another is my motto.

Good day

Hello pal!

I am trying to use this one xf86-video-ati , My card is a radeon X1400 . I will keep on trying

Thanks

schwarzygesetzlos · Post by **schwarzygesetzlos** » Wed Feb 04, 2009 9:18 am

lordkur wrote: Hello pal!

I am trying to use this one xf86-video-ati , My card is a radeon X1400 . I will keep on trying

Thanks

What does your kernel say about the initialization of the drm module?

Please post the output of "dmesg | grep drm" and your /Var/log/Xorg.0.log

Did you use the ~x86 version of x11-drivers/xf86-video-ati ? 6.10.0 is newest.

lordkur · Post by **lordkur** » Wed Feb 04, 2009 2:29 pm

schwarzygesetzlos wrote:
lordkur wrote: Hello pal!

I am trying to use this one xf86-video-ati , My card is a radeon X1400 . I will keep on trying

Thanks
What does your kernel say about the initialization of the drm module?

Please post the output of "dmesg | grep drm" and your /Var/log/Xorg.0.log

Did you use the ~x86 version of x11-drivers/xf86-video-ati ? 6.10.0 is newest.

Hello Friend:

This is what my kernel says about the load of drm module :

Code: Select all

Feb  4 09:42:17 machine Linux agpgart interface v0.102 (c) Dave Jones
Feb  4 09:42:17 machine [drm] Initialized drm 1.1.0 20060810

This is the output

Code: Select all

machine ~ # dmesg |grep -i drm
[drm] Initialized drm 1.1.0 20060810

This is the most important stuff from Xorg.0.log

Code: Select all

abacinate Desktop # cat Xorg.0.log |egrep -i 'error|warn|fatal|not'
It is not supported in any way.
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Warning, couldn't open module dri
(EE) Failed to load module "dri" (module does not exist, 0)
(WW) Warning, couldn't open module glx
(EE) Failed to load module "glx" (module does not exist, 0)
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
Not using RMX
(WW) RADEON(0): Option "TexturedXrender" is not used
(WW) RADEON(0): Option "ModelName" is not used
(WW) RADEON(0): Option "ReducedBlanking" is not used

I can upload the whole log if necessary.

I will take a look to the newest version of the driver and see what happens!!!
Thanks for ur help friend!

schwarzygesetzlos · Post by **schwarzygesetzlos** » Wed Feb 04, 2009 7:35 pm

lordkur wrote:This is what my kernel says about the load of drm module :

Code: Select all

Feb  4 09:42:17 machine Linux agpgart interface v0.102 (c) Dave Jones
Feb  4 09:42:17 machine [drm] Initialized drm 1.1.0 20060810

This is the output

Code: Select all

machine ~ # dmesg |grep -i drm
[drm] Initialized drm 1.1.0 20060810

This is the most important stuff from Xorg.0.log

Code: Select all

abacinate Desktop # cat Xorg.0.log |egrep -i 'error|warn|fatal|not'
It is not supported in any way.
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Warning, couldn't open module dri
(EE) Failed to load module "dri" (module does not exist, 0)
(WW) Warning, couldn't open module glx
(EE) Failed to load module "glx" (module does not exist, 0)
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
Not using RMX
(WW) RADEON(0): Option "TexturedXrender" is not used
(WW) RADEON(0): Option "ModelName" is not used
(WW) RADEON(0): Option "ReducedBlanking" is not used

I can upload the whole log if necessary.

I will take a look to the newest version of the driver and see what happens!!!
Thanks for ur help friend!

The whole log would be interesting - especially why the modules DRI and GLX do not exist! If Xorg can't find these modules for some reason then it doesn't make much of a difference if the kernel drm module works or not.

Are you sure you do have VIDEO_CARDS="radeon" or (VIDEO_CARDS="fbdev radeonhd") set in your /etc/make.conf and compiled xorg + mesa with the DRI useflag?

In any case your card has an RV515 chip (see http://de.wikipedia.org/wiki/ATI-Mobili ... n-X1-Serie) which is supported in both opensource drivers. But not sure if DRI is working in both master branches...

If DRI is working you should get an dmesg output like alex.blackbit in this thread: http://forums.gentoo.org/viewtopic-t-73 ... ight-.html

lordkur · Post by **lordkur** » Wed Feb 04, 2009 7:49 pm

Hello schwarzygesetzlos

THis is my make.conf file:

Code: Select all

machine ~ # cat  /etc/make.conf
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j3"
ACCEPT_KEYWORDS="~x86"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dfx X a52 aac dri acpi aiglx alsa apache2 bash-completion dbus dri dts dvb
     dvd dvdr dvdread fastcgi ffmpeg fortran glib hal ipod jpeg kde
     kdeenablefinal lirc lzo mmxext mozilla moznopango mp3 mpeg mysql nsplugin
     ogg opengl oss pdf png posix python qt4 quicktime speex spell sse sse2
     truetype usb vorbis webkit win32codecs xcb xml xvid -ipv6"
INPUT_DEVICES="keyboard mouse synaptics"
VIDEO_CARDS="radeon"
ALSA_CARDS="hda-intel"
source /usr/local/portage/layman/make.conf
FEATURES="parallel-fetch -protect-owned -collision-detect"
PORTAGE_ECLASS_WARNING_ENABLE="0"

I have compiled Xorg and mesa with the DRI flag enabled as you see:

Code: Select all

machine ~ # equery uses x11-base/xorg-server
[ Searching for packages matching x11-base/xorg-server... ]
[ Colour Code : set unset ]                                
[ Legend : Left column  (U) - USE flags from make.conf              ]
[        : Right column (I) - USE flags packages was installed with ]
[ Found these USE variables for x11-base/xorg-server-1.4.0.90-r3 ]   
 U I                                                                 
 + + 3dfx                      : Enable support for Voodoo chipsets, also called as 3DFX and TDFX
 - - debug                     : Enable extra debug codepaths, like asserts and extra output. If you want to get meaningful backtraces see http://www.gentoo.org/proj/en/qa/backtraces.xml                                                                                                                                
 - - dmx                       : Build the Distributed Multiheaded X server                                                                                  
 + + dri                       : Enable direct rendering: used for accelerated 3D and some 2D, like DMA                                                      
 + + hal                       : Enable Hardware Abstraction Layer (HAL) support

Code: Select all

machine ~ # equery uses mesa
[ Searching for packages matching mesa... ]
[ Colour Code : set unset ]
[ Legend : Left column  (U) - USE flags from make.conf              ]
[        : Right column (I) - USE flags packages was installed with ]
[ Found these USE variables for media-libs/mesa-7.2 ]
 U I
 - - debug               : Enable extra debug codepaths, like asserts and extra output. If you want to get meaningful backtraces see http://www.gentoo.org/proj/en/qa/backtraces.xml
 - - doc                 : Adds extra documentation (API, Javadoc, etc)
 - - kernel_FreeBSD      : <unknown>
 - - motif               : Adds support for the Motif toolkit
 + - nptl                : Enable support for Native POSIX Threads Library, the new threading module (requires linux-2.6 or better usually)
 - - pic                 : <unknown>
 - - video_cards_intel   : <unknown>
 - - video_cards_mach64  : <unknown>
 - - video_cards_mga     : <unknown>
 - - video_cards_none    : <unknown>
 - - video_cards_r128    : <unknown>
 + + video_cards_radeon  : <unknown>
 - - video_cards_s3virge : <unknown>
 - - video_cards_savage  : <unknown>
 - - video_cards_sis     : <unknown>
 - - video_cards_sunffb  : <unknown>
 - - video_cards_tdfx    : <unknown>
 - - video_cards_trident : <unknown>
 - - video_cards_via     : <unknown>
 + + xcb                 : Support the X C-language Binding, a replacement for Xlib

I am very curious about why xorg couldnt open glx and dri modules, is there some sort of path issue??

This is whole Xorg.0.log

Code: Select all


X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.21-gentoo-r2 i686 
Current Operating System: Linux machine 2.6.21-gentoo-r2 #24 SMP Thu Jan 29 23:00:35 VET 2009 i686
Build Date: 01 June 2008  06:26:29PM

Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb  4 09:42:24 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig-Layout[all]"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]"
(**) Option "ReducedBlanking"
(**) |   |-->Device "aticonfig-Device[0]"
(**) Option "AIGLX" "True"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "XVideo" is enabled
(**) Extension "Composite" is enabled
(==) |-->Input Device "Synaptics Touchpad"
(II) No default mouse found, adding one
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
	Using the first core pointer device.
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81caa40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1028,01bd rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 1028,01bd rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1028,01bd rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1028,01bd rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1028,01bd rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1028,01bd rev 01 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1028,01bd rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,7145 card 1028,2003 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,01af rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0832 card 1028,01bd rev 00 class 0c,00,10 hdr 80
(II) PCI: 03:01:1: chip 1180,0822 card 1028,01bd rev 19 class 08,05,01 hdr 80
(II) PCI: 03:01:2: chip 1180,0843 card 1028,01bd rev 01 class 08,80,00 hdr 80
(II) PCI: 03:01:3: chip 1180,0592 card 1028,01bd rev 0a class 08,80,00 hdr 80
(II) PCI: 03:01:4: chip 1180,0852 card 1028,01bd rev 05 class 08,80,00 hdr 80
(II) PCI: 0b:00:0: chip 8086,4222 card 8086,1020 rev 02 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xefd00000 - 0xefefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:28:0), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 11 non-prefetchable memory range:
	[0] -1	0	0xefc00000 - 0xefcfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:3), (0,12,13), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 12 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 12 non-prefetchable memory range:
	[0] -1	0	0xefa00000 - 0xefbfffff (0x200000) MX[B]
(II) Bus 12 prefetchable memory range:
	[0] -1	0	0xe0000000 - 0xe01fffff (0x200000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0xef900000 - 0xef9fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xd0000000/28, 0xefdf0000/16, I/O @ 0xee00/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xefcff000 - 0xefcfffff (0x1000) MX[B]
	[1] -1	0	0xef9fd700 - 0xef9fd7ff (0x100) MX[B]
	[2] -1	0	0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
	[3] -1	0	0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
	[4] -1	0	0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
	[5] -1	0	0xef9fd800 - 0xef9fdfff (0x800) MX[B]
	[6] -1	0	0xef9fe000 - 0xef9fffff (0x2000) MX[B]
	[7] -1	0	0xffa80000 - 0xffa803ff (0x400) MX[B]
	[8] -1	0	0xefffc000 - 0xefffffff (0x4000) MX[B]
	[9] -1	0	0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
	[10] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[11] -1	0	0x000010c0 - 0x000010df (0x20) IX[B]
	[12] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[13] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[14] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[15] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[16] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[17] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[18] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[19] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[20] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[21] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xefcff000 - 0xefcfffff (0x1000) MX[B]
	[1] -1	0	0xef9fd700 - 0xef9fd7ff (0x100) MX[B]
	[2] -1	0	0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
	[3] -1	0	0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
	[4] -1	0	0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
	[5] -1	0	0xef9fd800 - 0xef9fdfff (0x800) MX[B]
	[6] -1	0	0xef9fe000 - 0xef9fffff (0x2000) MX[B]
	[7] -1	0	0xffa80000 - 0xffa803ff (0x400) MX[B]
	[8] -1	0	0xefffc000 - 0xefffffff (0x4000) MX[B]
	[9] -1	0	0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
	[10] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[11] -1	0	0x000010c0 - 0x000010df (0x20) IX[B]
	[12] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[13] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[14] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[15] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[16] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[17] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[18] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[19] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[20] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[21] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xefcff000 - 0xefcfffff (0x1000) MX[B]
	[5] -1	0	0xef9fd700 - 0xef9fd7ff (0x100) MX[B]
	[6] -1	0	0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
	[7] -1	0	0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
	[8] -1	0	0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
	[9] -1	0	0xef9fd800 - 0xef9fdfff (0x800) MX[B]
	[10] -1	0	0xef9fe000 - 0xef9fffff (0x2000) MX[B]
	[11] -1	0	0xffa80000 - 0xffa803ff (0x400) MX[B]
	[12] -1	0	0xefffc000 - 0xefffffff (0x4000) MX[B]
	[13] -1	0	0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
	[14] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x000010c0 - 0x000010df (0x20) IX[B]
	[18] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[19] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[20] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[21] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[23] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[24] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[25] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[26] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[27] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded by default.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.0.90, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 6.9.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 4.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Mobility Radeon X1400 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xefcff000 - 0xefcfffff (0x1000) MX[B]
	[5] -1	0	0xef9fd700 - 0xef9fd7ff (0x100) MX[B]
	[6] -1	0	0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
	[7] -1	0	0xef9fd500 - 0xef9fd5ff (0x100) MX[B]

(II) resource ranges after probing:
	IX[B]
	[27] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[28] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[29] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[30] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
	[31] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[32] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "DRI" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(WW) RADEON(0): R500 support is under development. Please report any issues to xorg-driver-ati@lists.x.org
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
	SubsystemVendorID: 0x1028 SubsystemID: 0x2003
	IOBaseAddress: 0xee00
	Filename: BR18652D.bin
	BIOS Bootup Message: 
M54P Dell Key largo A12 DDR2 BU BIOS 432e/396m Channel B                    

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 432000
(II) RADEON(0): Default Memory Clock: 396000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 432.000000, mclk: 396.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=110000; xclk=40000
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
(II) RADEON(0): Bios Connector table: 
(II) RADEON(0): Port0: DDCType-0x7e40, DACType-1, TMDSType-0, ConnectorType-1, hpd_mask-0x0
(II) RADEON(0): Port1: DDCType-0x7e30, DACType-0, TMDSType-0, ConnectorType-7, hpd_mask-0x0
(II) RADEON(0): Output VGA-0 using monitor section aticonfig-Monitor[0]
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71110
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- 0x7e40
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- 0x7e30
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC  Model: 0  Serial#: 0
(II) RADEON(0): Year: 2006  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(II) RADEON(0):  DF056154X3
(II) RADEON(0):  '@PZ°Ùÿ
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004ca3000000000000
(II) RADEON(0): 	00100103802115780a87f594574f8c27
(II) RADEON(0): 	27505400000001010101010101010101
(II) RADEON(0): 	010101010101c71b00a0502017303020
(II) RADEON(0): 	26004bcf100000190000000f00000000
(II) RADEON(0): 	00000000002387026400000000fe0044
(II) RADEON(0): 	463035360331353458330a20000000fe
(II) RADEON(0): 	002740505a81b0d9ff01010a2020009d
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC  Model: 0  Serial#: 0
(II) RADEON(0): Year: 2006  Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(II) RADEON(0):  DF056154X3
(II) RADEON(0):  '@PZ°Ùÿ
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004ca3000000000000
(II) RADEON(0): 	00100103802115780a87f594574f8c27
(II) RADEON(0): 	27505400000001010101010101010101
(II) RADEON(0): 	010101010101c71b00a0502017303020
(II) RADEON(0): 	26004bcf100000190000000f00000000
(II) RADEON(0): 	00000000002387026400000000fe0044
(II) RADEON(0): 	463035360331353458330a20000000fe
(II) RADEON(0): 	002740505a81b0d9ff01010a2020009d
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "SEC", prod id 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.2.0
	ABI class: X.Org Video Driver, version 2.0
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xefdf0000 - 0xefdfffff (0x10000) MX[B]
	[1] 0	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	
(II) RADEON(0): RADEONScreenInit d0000000 0 0
(==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
Output 68 disable success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1280x800 - 1440 823 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000 0xd7ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
freq: 71110000
best_freq: 71100000
best_feedback_div: 316
best_ref_div: 12
best_post_div: 10
(II) RADEON(0): crtc(0) Clock: mode 71110, PLL 71100
(II) RADEON(0): crtc(0) PLL  : refdiv 12, fbdiv 0x13C(316), pdiv 10
Set CRTC PLL success
Set CRTC Timing success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
Output LVDS setup success
Output 23 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output 68 disable success
Blank CRTC 1 success
Disable CRTC 1 success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num pipes is 1
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1282)
(II) RADEON(0): Using hardware cursor 1 (scanline 1285)
(II) RADEON(0): Largest offscreen area available: 1280 x 6902
(II) RADEON(0): Textured video requires CP on R5xx/IGP
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "TexturedXrender" is not used
(WW) RADEON(0): Option "ModelName" is not used
(WW) RADEON(0): Option "ReducedBlanking" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(**) Option "SHMConfig" "1"
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents"
(**) Option "CorePointer"
(**) Synaptics Touchpad: always reports core events
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "AlwaysCore"
(**) <default pointer>: doesn't report core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) evaluating device (<default keyboard>)
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (Synaptics Touchpad)
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(--) Synaptics Touchpad touchpad found
Enable CRTC 0 success
Unblank CRTC 0 success
Output 23 enable success
(II) Synaptics touchpad driver version 0.14.6 (1406)
SynPS/2 Synaptics TouchPad no synaptics event device found (checked 15 nodes)
(EE) xf86OpenSerial: No Device specified.
Synaptics driver unable to open device
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) evdev brain: Rescanning devices (1).
(**) AT Translated Set 2 keyboard-isa0060/serio0/input0: always reports core events
(**) Option "XkbModel" "evdev"
(**) Option "XkbLayout" "us"
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard-isa0060/serio0/input0" (type: KEYBOARD)
(II) AT Translated Set 2 keyboard-isa0060/serio0/input0: Init
(II) AT Translated Set 2 keyboard-isa0060/serio0/input0: On

Your help its been great friend.

Thanks!

ali3nx · Post by **ali3nx** » Wed Feb 04, 2009 7:51 pm

Code: Select all

#CONFIG_AGP_INTEL is not set

The video card may be an ati but your mainboard chipset is not

Also may be very helpful to include the agpgart main code in the kernel image and not as a module.

Code: Select all

CONFIG_AGP=y

lordkur · Post by **lordkur** » Wed Feb 04, 2009 7:57 pm

ali3nx wrote:
Code: Select all
#CONFIG_AGP_INTEL is not set
The video card may be an ati but your mainboard chipset is not

Also may be very helpful to include the agpgart main code in the kernel image and not as a module.
Code: Select all
CONFIG_AGP=y

Thanks for u comment, hopefully this will be the issue this time.

Thanks again

lordkur · Post by **lordkur** » Wed Feb 04, 2009 8:07 pm

ali3nx wrote:
Code: Select all
#CONFIG_AGP_INTEL is not set
The video card may be an ati but your mainboard chipset is not

Also may be very helpful to include the agpgart main code in the kernel image and not as a module.
Code: Select all
CONFIG_AGP=y

So, These are the new kernel settings:

Code: Select all

# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y

Is that right?

thanks

schwarzygesetzlos · Post by **schwarzygesetzlos** » Wed Feb 04, 2009 11:13 pm

@lordkur: You have an interesting state of your gentoo-system

gentoo-sources-2.6.21 are pretty outdated and x11-base/xorg-server-1.4.0.90-r3 is neither a stable nor a current release. I suggest you upgrade to latest stable 2.6.27 sources and xorg-7.4. By doing this there's a good chance to get your card running properly without using experimental git-sources.

Concerning acceleration & ati there are improvements over gentoo-stable xorg-7.2:
http://www.x.org/wiki/Releases/7.4

Your xorg-log says:

Code: Select all

(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled

Seems you have to use EXA to get the kind of acceleration you want. To do this add Option "AccelMethod" "EXA" to your xorg.con in the "Device" Section. Should look something like this:

Code: Select all

Section "Device"
	Identifier "Card0"
	Driver     "radeon"
#	Option     "NoAccel" "false"
	Option     "AccelMethod" "EXA"
EndSection

But if I were you I would emerge a more sane xorg-server first

lordkur · Post by **lordkur** » Thu Feb 05, 2009 2:00 am

schwarzygesetzlos wrote:@lordkur: You have an interesting state of your gentoo-system gentoo-sources-2.6.21 are pretty outdated and x11-base/xorg-server-1.4.0.90-r3 is neither a stable nor a current release. I suggest you upgrade to latest stable 2.6.27 sources and xorg-7.4. By doing this there's a good chance to get your card running properly without using experimental git-sources.

Concerning acceleration & ati there are improvements over gentoo-stable xorg-7.2:
http://www.x.org/wiki/Releases/7.4

Your xorg-log says:
Code: Select all
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled 
Seems you have to use EXA to get the kind of acceleration you want. To do this add Option "AccelMethod" "EXA" to your xorg.con in the "Device" Section. Should look something like this:
Code: Select all
Section "Device"
	Identifier "Card0"
	Driver     "radeon"
#	Option     "NoAccel" "false"
	Option     "AccelMethod" "EXA"
EndSection
But if I were you I would emerge a more sane xorg-server first

First and foremost, thanks for ur help schwarzygesetzlos .

I know my system is outdated due to lack of time

I will update the system and try out. And see what happens,
THANKS !

lordkur · Post by **lordkur** » Thu Feb 05, 2009 4:03 pm

schwarzygesetzlos wrote:@lordkur: You have an interesting state of your gentoo-system gentoo-sources-2.6.21 are pretty outdated and x11-base/xorg-server-1.4.0.90-r3 is neither a stable nor a current release. I suggest you upgrade to latest stable 2.6.27 sources and xorg-7.4. By doing this there's a good chance to get your card running properly without using experimental git-sources.

Concerning acceleration & ati there are improvements over gentoo-stable xorg-7.2:
http://www.x.org/wiki/Releases/7.4

Your xorg-log says:
Code: Select all
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled 
Seems you have to use EXA to get the kind of acceleration you want. To do this add Option "AccelMethod" "EXA" to your xorg.con in the "Device" Section. Should look something like this:
Code: Select all
Section "Device"
	Identifier "Card0"
	Driver     "radeon"
#	Option     "NoAccel" "false"
	Option     "AccelMethod" "EXA"
EndSection
But if I were you I would emerge a more sane xorg-server first

Hello I did the upgrades!!! I have 2 news one bad and one good, the good news is I got dri working as root, not as normal user.

The issue goes like this: I try to log into kde, when the splash screen is still running I got a blank screen, then everything goes dark , imposible to work like this.

If I manually log in as root (startx as root), enter kde 4.1 and everything goes smothly

this is my xorg.conf

Code: Select all

Section "ServerLayout"
        Identifier     "aticonfig-Layout[all]"
        Screen 0       "aticonfig-Screen[0]" 0 0
        Option          "AIGLX" "True"
EndSection


Section "Module"
        Load  "vbe"
        Load  "GLcore"
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "bitmap"
        Load  "record"
        Load  "freetype"
EndSection


Section "InputDevice"
        Identifier  "Synaptics Touchpad"
        Driver      "synaptics"
        Option      "CorePointer"
        Option      "SendCoreEvents"
        Option      "Device" "/dev/input/mouse0"
        Option      "Protocol" "auto-dev"
        Option      "ZAxisMapping" "4 5 6 7"
        Option      "HorizScrollDelta" "0"
        Option      "SHMConfig" "1"
        Option      "Emulate3Buttons" "true"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
        Option      "ReducedBlanking"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "radeon"
        Option      "XAANoOffscreenPixmaps" "true"
        Option      "TexturedXrender" "true"
        Option      "DRI" "true"
        Option      "AccelMethod" "EXA"
        VendorName  "ATI Corp."
        BoardName   "X1400"
EndSection


Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
        Group       "video"
        Mode         0666
EndSection


Section "Extensions"
        Option      "XVideo" "enable"
        #Option "Composite" "enable"
EndSection

Any help will be great!!!

thanks

codestation · Post by **codestation** » Thu Feb 05, 2009 4:59 pm

lordkur wrote: Hello I did the upgrades!!! I have 2 news one bad and one good, the good news is I got dri working as root, not as normal user.

The issue goes like this: I try to log into kde, when the splash screen is still running I got a blank screen, then everything goes dark , imposible to work like this.

If I manually log in as root (startx as root), enter kde 4.1 and everything goes smothly

You added your user to the "video" group?

lordkur · Post by **lordkur** » Thu Feb 05, 2009 5:01 pm

codestation wrote:
lordkur wrote: Hello I did the upgrades!!! I have 2 news one bad and one good, the good news is I got dri working as root, not as normal user.

The issue goes like this: I try to log into kde, when the splash screen is still running I got a blank screen, then everything goes dark , imposible to work like this.

If I manually log in as root (startx as root), enter kde 4.1 and everything goes smothly
You added your user to the "video" group?

Hello:

Now I solve it. The users were in the right group however I have enabled the kde desktop effects, thats was causing the issue.

Thanks

lordkur · Post by **lordkur** » Sun Feb 08, 2009 11:47 pm

Finally I got it all working. Take note:

kernel

Code: Select all

# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m

modules autoload , the order is very important drm BEFORE radeon

Code: Select all

machine linux # cat /etc/modules.autoload.d/kernel-2.6
vboxdrv
agpgart
intel-agp
ati-agp
drm
radeon
iwl3945
snd-hda-intel model=ref

xorg.conf

Code: Select all

abacinate linux # cat /etc/X11/xorg.conf
Section "ServerLayout"                  
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0     
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection                                       

Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "built-ins"            
EndSection                                  

Section "Module"
        Load  "glx"
        Load  "extmod"
        Load  "xtrap" 
        Load  "record"
        Load  "dbe"   
        Load  "dri"   
EndSection            

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"      
EndSection                     

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse" 
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"  
EndSection                                    

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "SEC"     
        ModelName    "0"       
EndSection                     

Section "Device"
        Identifier  "Card0"
        Driver      "radeonhd"
        VendorName  "ATI Technologies Inc"
        BoardName   "Radeon Mobility X1400"
        BusID       "PCI:1:0:0"            
        Option "AccelMethod" "XAA"         
        Option "AccelDFS"    "1"           
        Option "AGPMode" "1"               
        Option "AGPFastWrite" "1"          
        Option "GARTSize" "64"             
        Option "EnablePageFlip" "1"        
        Option "ColorTiling" "1"           
        Option "DRI" "on"                  
EndSection                                 

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
 Group        "video"
  Mode         0660
EndSection

Driver

Radeonhd
* x11-drivers/xf86-video-radeonhd
Latest version available: 1.2.4

Kernel linux-2.6.28-gentoo-r1

Xorg 7.4

THANKS

mr2600 · Post by **mr2600** » Tue Mar 17, 2009 7:12 pm

I'm using a similar setup but X will only start correctly as root

As a normal user X takes a *very* long time to get going and radeon_drv.so is taking up a large amount of cpu from oprofile

From the xorg.log

Code: Select all

(II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-1:ddc2" removed.
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0

Is repeated a few thousand times if I let it sit there for about 10 minutes.

Any ideas about this one?

xf86-video-ati X1400 NO DRI [SOLVED]

xf86-video-ati X1400 NO DRI [SOLVED]

Anyone?

Anyone?

avenue ?

Re: avenue ?

Re: avenue ?

Re: avenue ?

schwarzygesetzlos

Finally