Official thread: "zen-sources" - Part V

Message

Phlogiston · Post by **Phlogiston** » Sat Dec 20, 2008 10:32 am

  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-x86
  CALL    scripts/checksyscalls.sh
  CHK     include/linux/compile.h
/usr/src/zen-git-sources/drivers/net/wireless/madwifi/ath_rate/amrr/Makefile:49: drivers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc: No such file or directory
make[5]: *** No rule to make target `drivers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc'.  Stop.
make[4]: *** [drivers/net/wireless/madwifi/ath_rate/amrr] Error 2
make[3]: *** [drivers/net/wireless/madwifi] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

ponciarello · Post by **ponciarello** » Sat Dec 20, 2008 1:18 pm

ponciarello wrote:

Code: Select all

vers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc: No such file or directory
make[6]: *** No rule to make target `drivers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc'.  Stop.
make[5]: *** [drivers/net/wireless/madwifi/ath_rate/amrr] Error 2
make[4]: *** [drivers/net/wireless/madwifi] Error 2
make[3]: *** [drivers/net/wireless] Error 2
make[2]: *** [drivers/net] Error 2
make[1]: *** [_clean_drivers] Error 2
make[1]: Leaving directory `/usr/src/zen-sources'
make: *** [minimal_clean] Error 2

solved that with

Code: Select all

touch drivers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc

eight messages ago

Phlogiston · Post by **Phlogiston** » Sat Dec 20, 2008 6:32 pm

ponciarello wrote:

Code: Select all

vers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc: No such file or directory
make[6]: *** No rule to make target `drivers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc'.  Stop.
make[5]: *** [drivers/net/wireless/madwifi/ath_rate/amrr] Error 2
make[4]: *** [drivers/net/wireless/madwifi] Error 2
make[3]: *** [drivers/net/wireless] Error 2
make[2]: *** [drivers/net] Error 2
make[1]: *** [_clean_drivers] Error 2
make[1]: Leaving directory `/usr/src/zen-sources'
make: *** [minimal_clean] Error 2

solved that with

Code: Select all

touch drivers/net/wireless/madwifi/ath_rate/amrr/../../Makefile.inc

eight messages ago

Hehe I just used another algorithm

massimo · Post by **massimo** » Sun Dec 21, 2008 4:52 pm

JoKo wrote:Hi,

Where to find the latest patch?

e.g. http://zen-sources.org/kernels/2.6.28-r ... patch.lzma is not working.

Here too:

>>> Emerging (1 of 1) sys-kernel/zen-sources-2.6.28_rc3-r2 to /
>>> Resuming download...
>>> Downloading 'http://distfiles.gentoo.org/distfiles/2 ... patch.lzma'
--2008-12-21 17:49:41-- http://distfiles.gentoo.org/distfiles/2 ... patch.lzma
Resolving distfiles.gentoo.org... 216.165.129.135, 156.56.247.195, 140.211.166.134, ...
Connecting to distfiles.gentoo.org|216.165.129.135|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2008-12-21 17:49:41 ERROR 404: Not Found.

>>> Resuming download...
>>> Downloading 'http://distro.ibiblio.org/pub/linux/dis ... patch.lzma'
--2008-12-21 17:49:41-- http://distro.ibiblio.org/pub/linux/dis ... patch.lzma
Resolving distro.ibiblio.org... 152.46.7.109
Connecting to distro.ibiblio.org|152.46.7.109|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2008-12-21 17:49:43 ERROR 404: Not Found.

>>> Resuming download...
>>> Downloading 'http://zen-sources.org/kernels/2.6.28-r ... patch.lzma'
--2008-12-21 17:49:43-- http://zen-sources.org/kernels/2.6.28-r ... patch.lzma
Resolving zen-sources.org... 134.155.50.250
Connecting to zen-sources.org|134.155.50.250|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: `/usr/portage/distfiles/2.6.28-rc3-zen2.patch.lzma'

100%[=================================================================================================================>] 29,207 102K/s in 0.3s

2008-12-21 17:49:44 (102 KB/s) - `/usr/portage/distfiles/2.6.28-rc3-zen2.patch.lzma' saved [29207]

('Filesize does not match recorded size', 29207L, 6573453)
!!! Fetched file: 2.6.28-rc3-zen2.patch.lzma VERIFY FAILED!
!!! Reason: Filesize does not match recorded size
!!! Got: 29207
!!! Expected: 6573453

darklegion · Post by **darklegion** » Tue Dec 23, 2008 12:00 am

Website (and git) still down for me too.In the mean time, does anybody have a broken out reiser4 patch from zen-sources? I want to use 2.6.28-rc9 vanilla but I can't because the mm reiser4 patch (and the 2.6.27 patch) doesn't work with 2.6.28.

Phlogiston · Post by **Phlogiston** » Tue Dec 23, 2008 12:03 am

darklegion wrote:Website (and git) still down for me too.In the mean time, does anybody have a broken out reiser4 patch from zen-sources? I want to use 2.6.28-rc9 vanilla but I can't because the mm reiser4 patch (and the 2.6.27 patch) doesn't work with 2.6.28.

Website is up and running: http://git.zen-sources.org/

kernelOfTruth · Post by **kernelOfTruth** » Tue Dec 23, 2008 12:43 am

darklegion wrote:Website (and git) still down for me too.In the mean time, does anybody have a broken out reiser4 patch from zen-sources? I want to use 2.6.28-rc9 vanilla but I can't because the mm reiser4 patch (and the 2.6.27 patch) doesn't work with 2.6.28.

why don't you guys just RTFI (instruction

) ? http://forums.gentoo.org/viewtopic-p-51 ... ml#5185885

i've updated it some days ago and it still works

darklegion · Post by **darklegion** » Tue Dec 23, 2008 1:56 am

Yeah, that's the one I was using kerneloftruth.It was only down for a day or so, but it was down

Good to see it's back up again.

massimo · Post by **massimo** » Tue Dec 23, 2008 6:55 am

Installing the latest version from the overlay does definitely not work.

tranquilcool · Post by **tranquilcool** » Tue Dec 23, 2008 7:35 am

*** Unable to determine the target kernel version. ***

error with nvidia-drivers.

EDIT: it's an error with the nvidia-drivers-173.14.12-r2 ebuild from the zen-overlay.
so it's nvidia ebuild related.

rmh3093 · Post by **rmh3093** » Tue Dec 23, 2008 9:32 pm

kernelOfTruth wrote:
darklegion wrote:Website (and git) still down for me too.In the mean time, does anybody have a broken out reiser4 patch from zen-sources? I want to use 2.6.28-rc9 vanilla but I can't because the mm reiser4 patch (and the 2.6.27 patch) doesn't work with 2.6.28.
why don't you guys just RTFI (instruction ) ? http://forums.gentoo.org/viewtopic-p-51 ... ml#5185885

i've updated it some days ago and it still works

would you mind moving some or all this to the website somewhere, there in an install guide section that could use good "generic" git instructions and then some basic distro related (for gentoo that would be layman and ebuild info) info

Strowi · Post by **Strowi** » Thu Dec 25, 2008 1:16 pm

hi,

just noticed tp_smapi has been removed in git, does anyone know why?
Also i noticed: ide_piix does not work anymore on thinkpad x31, instead ata_piix should be used. If anyone wonders why new kernel is not bootable.

SlashBeast · Post by **SlashBeast** » Thu Dec 25, 2008 10:10 pm

Where is gone zen.git in git.zen-sources.org?

FallenWizard · Post by **FallenWizard** » Fri Dec 26, 2008 11:18 pm

SlashBeast wrote:Where is gone zen.git in git.zen-sources.org?

Quote from IRC:

<rmh3093> ocin: because people bitch that the they cant tell what in a zen kernel
<rmh3093> and they want an up2date website
<rmh3093> and i agree
<rmh3093> we need a better webpresense
<rmh3093> so until the website is to my satisfaction
<rmh3093> there will be no kernel
<rmh3093> so people should start working on the website

kernelOfTruth · Post by **kernelOfTruth** » Fri Dec 26, 2008 11:49 pm

rmh3093 wrote:
kernelOfTruth wrote:
darklegion wrote:Website (and git) still down for me too.In the mean time, does anybody have a broken out reiser4 patch from zen-sources? I want to use 2.6.28-rc9 vanilla but I can't because the mm reiser4 patch (and the 2.6.27 patch) doesn't work with 2.6.28.
why don't you guys just RTFI (instruction ) ? http://forums.gentoo.org/viewtopic-p-51 ... ml#5185885

i've updated it some days ago and it still works
would you mind moving some or all this to the website somewhere, there in an install guide section that could use good "generic" git instructions and then some basic distro related (for gentoo that would be layman and ebuild info) info

done in some way - it still needs some corrections (BBCode -> HTML-Code) but at the least the people can't bitch around about lacking installation instruction now

<rmh3093> we need a better webpresense
<rmh3093> so until the website is to my satisfaction
<rmh3093> there will be no kernel
<rmh3093> so people should start working on the website

is the zen-sources repo being removed the result of that discussion / announcement ?

prestige · Post by **prestige** » Fri Dec 26, 2008 11:54 pm

Well... putting zen website with higher priority than the zen sources itself does not make any sense to me. The most important thing to me as a zen-sources user is the git repository and the zen-sources itself and not the website! We need a good quality up do date sources and not a fancy website (refer to kernel.org for example). Please resolve the internal team issues people (I presume you are experienced such).

2.6.28-rc9-zen1 works very well.

Holysword · Post by **Holysword** » Sat Dec 27, 2008 12:58 am

prestige wrote:Well... putting zen website with higher priority than the zen sources itself does not make any sense to me. The most important thing to me as a zen-sources user is the git repository and the zen-sources itself and not the website! We need a good quality up do date sources and not a fancy website (refer to kernel.org for example). Please resolve the internal team issues people (I presume you are experienced such).

2.6.28-rc9-zen1 works very well.

I'm not really used to this linux world, but I'm afraid that it can have a bad end. Its sad 'cause those guys are doing a great job here.
BTW, where can I get 2.6.28-rc9?? My last version is rc8 =S

are · Post by **are** » Sat Dec 27, 2008 4:23 am

prestige wrote:Well... putting zen website with higher priority than the zen sources itself does not make any sense to me. The most important thing to me as a zen-sources user is the git repository and the zen-sources itself and not the website! We need a good quality up do date sources and not a fancy website (refer to kernel.org for example). Please resolve the internal team issues people (I presume you are experienced such).

2.6.28-rc9-zen1 works very well.

I can't tell how much I agree! I would like to ask for proper patches, not for any web-presence.

Guys, as I told you already: you messed zen-sources. I really miss Waninkokos kamikaze-sources! He has a much better feeling what's needed and what not.

Nevertheless: 2.6.28-rc9-zen1 works well and is much better then nothing. Have I to fork and set up a own overlay with ebuilds now?

Regards!

mbar · Post by **mbar** » Sat Dec 27, 2008 1:41 pm

are wrote:Nevertheless: 2.6.28-rc9-zen1 works well and is much better then nothing. Have I to fork and set up a own overlay with ebuilds now?

Regards!

Yes please!!! Because I fvcking hate live/git ebuilds, I like my kernel with a single file patch. And I mean it

Phlogiston · Post by **Phlogiston** » Sat Dec 27, 2008 5:47 pm

I don't understand it either. Updating the website to a minimum takes no time... Furthermore they changed things that much last two months, its just annoying.

mieszkoslusarczyk · Post by **mieszkoslusarczyk** » Sat Dec 27, 2008 7:39 pm

Code: Select all

* Digest verification failed:
 * /usr/portage/local/layman/THE/x11-base/xorg-server/xorg-server-9999.ebuild
 * Reason: Filesize does not match recorded size
 * Got: 14170
 * Expected: 14208

kowal · Post by **kowal** » Sat Dec 27, 2008 11:35 pm

Anyone else getting "fatal: The remote end hung up unexpectedly" when cloning zen-sources as outlined on the first page of this thread?
Solution: change repository location to git://repo.or.cz/linux-2.6/zen-sources.git

SlashBeast · Post by **SlashBeast** » Sun Dec 28, 2008 12:00 am

FallenWizard wrote:
<rmh3093> ocin: because people bitch that the they cant tell what in a zen kernel
<rmh3093> and they want an up2date website
<rmh3093> and i agree
<rmh3093> we need a better webpresense
<rmh3093> so until the website is to my satisfaction
<rmh3093> there will be no kernel
<rmh3093> so people should start working on the website

ROTFL'n'LOL... no website == no kernel? Funny.

mbar wrote:
are wrote:Nevertheless: 2.6.28-rc9-zen1 works well and is much better then nothing. Have I to fork and set up a own overlay with ebuilds now?

Regards!
Yes please!!! Because I fvcking hate live/git ebuilds, I like my kernel with a single file patch. And I mean it

+1

ponciarello · Post by **ponciarello** » Sun Dec 28, 2008 8:35 am

SlashBeast wrote:ROTFL'n'LOL

+1 lol

in the meantime (like Helmet sung), if someone needs latest version released, 2.6.28-rc9-zen1 (apply to 2.6.28-rc9), I've diffed the patch, it's here.

are · Post by **are** » Sun Dec 28, 2008 11:45 am

In order to give the zen-guys enough time to discuss their website issue:

I've raised kamikaze-sources-2.6.28_rc9-r1.ebuild from death.

disclaimer: it's just the work of the zen-guys plus some organization. I take no credits as all parts are shameless stolen...

special note: unfortunately the kernel-2.eclass does not support lzma so far and I have to use bz2. will send a patched kernel-2.eclass to the developpers soon.

Official thread: "zen-sources" - Part V

obtaining zen-sources