[SOLVED] Drukarka Brother DCP-135C

Message

ksitau · Post by **ksitau** » Wed Apr 23, 2008 4:32 pm

Jak zainstalowac pod gentoo Brother DCP-135C?

Pozdrawiam

SlashBeast · Post by **SlashBeast** » Wed Apr 23, 2008 4:50 pm

Normalnie, google + gentoo + cups.

ksitau · Post by **ksitau** » Wed Apr 23, 2008 5:42 pm

A tak, no ze tez nie pomyslalem

A jakies bardziej praktyczne porady? Bo wszystko co do tej pory widzialem w sieci nie pomoglo. Pod CUPS nie chodzilo, odinstalowalem i zainstalowalem LPR - tyz nic. Musze cos miec nie tak...

SlashBeast · Post by **SlashBeast** » Wed Apr 23, 2008 6:08 pm

Cups nie widział Ci drukarki wpiętej w port?

ksitau · Post by **ksitau** » Wed Apr 23, 2008 7:02 pm

CUPS widzi drukarke. Nie wiem tylko jak skorzystac z tych sterownikow brothera, bo sa przeciez pod LPR. Jest tez tam jakis wrapper CUPS, ale sa tam jakies 3 pliczki nie wiecej niz 300 bajtow kazdy. Nie wiele mowia mi.

Odinstalowalem wiec CUPSa i mam LPRng i teraz to juz nic nie mam.

Ale podstawowy problem to nie wiem jak ugryzc te sterowniki od brothera

ksitau · Post by **ksitau** » Sun May 18, 2008 4:00 pm

English follows..

Instalacja w linux drukarki Brother DCP-135C: Problem rozwiazany

1. Pobierz nastepujace pliki ze strony brothera (w miejscu gwiazdki jest numer wersji pliku):
dcp135ccupswrapper-*.rpm
dcp135clpr-*.rpm

2. Wrzuc te pliki do jednego katalogu
3. Otworz terminal i przejdz do tego katalogu komenda "cd"
4. Wykonaj polecenia:
su
emerge cups
/etc/init.d/cupsd start
rc-update add cupsd default
rpm2targz ./dcp135clpr-*.rpm
rpm2targz ./dcp135ccupswrapper-*.rpm
tar zxvf ./dcp135clpr-*.tar.gz -C /
tar zxvf ./dcp135ccupswrapper-*.tar.gz -C /
cd /usr/local/Brother/Printer/dcp135c/cupswrapper
cp ./cupswrapperdcp135c ./cupswrapperdcp135c.bak
/bin/sed 's/\/etc\/init.d\/cups\ restart/\/etc\/init.d\/cupsd\ restart/g' ./cupswrapperdcp135c.bak > ./cupswrapperdcp135c
mkdir /usr/lib/cups
mkdir /usr/lib/cups/filter
sh cupswrapperdcp135c -i
cp /usr/lib/cups/filter/brlpdwrapperdcp135c /usr/libexec/cups/filter
/etc/init.d/cupsd restart

5. Pod adresem http://localhost:631 mozesz wydrukowac strone testowa

U mnie na 64 bitach dziala

-------------------------------------------------------------------------------------

English version

Linux Gentoo printer installation Brother DCP-135C: Problem solved

1. Get files from Brother website (star means number of version):
Web: http://solutions.brother.com/linux/en_us/index.html
file 1: dcp135ccupswrapper-*.rpm
file 2: dcp135clpr-*.rpm

2. Put those files into one directory
3. Open terminal and change directory to where your downloaded files are located ("cd" command)
4. Run commands:
su
emerge cups
/etc/init.d/cupsd start
rc-update add cupsd default
rpm2targz ./dcp135clpr-*.rpm
rpm2targz ./dcp135ccupswrapper-*.rpm
tar zxvf ./dcp135clpr-*.tar.gz -C /
tar zxvf ./dcp135ccupswrapper-*.tar.gz -C /
cd /usr/local/Brother/Printer/dcp135c/cupswrapper
cp ./cupswrapperdcp135c ./cupswrapperdcp135c.bak
/bin/sed 's/\/etc\/init.d\/cups\ restart/\/etc\/init.d\/cupsd\ restart/g' ./cupswrapperdcp135c.bak > ./cupswrapperdcp135c
mkdir /usr/lib/cups
mkdir /usr/lib/cups/filter
sh cupswrapperdcp135c -i
cp /usr/lib/cups/filter/brlpdwrapperdcp135c /usr/libexec/cups/filter
/etc/init.d/cupsd restart

5. Now you should be able to print test page, just open web browser and go to this page: http://localhost:631

Works fine for me on my 64bit linux version

lazy_bum · Post by **lazy_bum** » Sun May 18, 2008 5:57 pm

@ksitau - to jeszcze popatrz na regulamin i zastosuj się do punktu mówiącego o "rozwiązanych" tematach.

ChrisJumper · Post by **ChrisJumper** » Sun Sep 08, 2019 11:27 pm

Dear Gentoo Community,

i am just a thread-gravedigger cause i got trouble with this printer in September 2019 with:

- net-print/cups-2.3.0
- cups-filters-1.25.4

Short Story:

For rc-init:

Code: Select all

English version

Linux Gentoo printer installation Brother DCP-135C: Problem solved

1. Get files from Brother website (star means number of version):
Web: http://solutions.brother.com/linux/en_us/index.html
file 1: dcp135ccupswrapper-*.rpm
file 2: dcp135clpr-*.rpm

2. Put those files into one directory
3. Open terminal and change directory to where your downloaded files are located ("cd" command)
4. Run commands:
su
emerge cups
/etc/init.d/cupsd start
rc-update add cupsd default
rpm2targz ./dcp135clpr-*.rpm
rpm2targz ./dcp135ccupswrapper-*.rpm
tar zxvf ./dcp135clpr-*.tar.gz -C /
tar zxvf ./dcp135ccupswrapper-*.tar.gz -C /
cd /usr/local/Brother/Printer/dcp135c/cupswrapper
cp ./cupswrapperdcp135c ./cupswrapperdcp135c.bak
/bin/sed 's/\/etc\/init.d\/cups\ restart/\/etc\/init.d\/cupsd\ restart/g' ./cupswrapperdcp135c.bak > ./cupswrapperdcp135c
/bin/sed -i 's/custom/Other/g' ./cupswrapperdcp135c
mkdir /usr/lib/cups
mkdir /usr/lib/cups/filter
sh cupswrapperdcp135c -i
cp /usr/lib/cups/filter/brlpdwrapperdcp135c /usr/libexec/cups/filter
/etc/init.d/cupsd restart

Or for Systemd:

Code: Select all

English version

Linux Gentoo printer installation Brother DCP-135C: Problem solved

1. Get files from Brother website (star means number of version):
Web: http://solutions.brother.com/linux/en_us/index.html
file 1: dcp135ccupswrapper-*.rpm
file 2: dcp135clpr-*.rpm

2. Put those files into one directory
3. Open terminal and change directory to where your downloaded files are located ("cd" command)
4. Run commands:
su
emerge cups
systemctl start cups
systemctl enable default
rpm2targz ./dcp135clpr-*.rpm
rpm2targz ./dcp135ccupswrapper-*.rpm
tar zxvf ./dcp135clpr-*.tar.gz -C /
tar zxvf ./dcp135ccupswrapper-*.tar.gz -C /
cd /usr/local/Brother/Printer/dcp135c/cupswrapper
cp ./cupswrapperdcp135c ./cupswrapperdcp135c.bak
/bin/sed 's/\/etc\/init.d\/cups\ restart/systemctl restart cups/g' ./cupswrapperdcp135c.bak > ./cupswrapperdcp135c
/bin/sed -i 's/custom/Other/g' ./cupswrapperdcp135c
mkdir /usr/lib/cups
mkdir /usr/lib/cups/filter
sh cupswrapperdcp135c -i
cp /usr/lib/cups/filter/brlpdwrapperdcp135c /usr/libexec/cups/filter
systemctl restart cups

Long Story - With Links and Errors for the Search Engines.

The Printer did not work, and i could not re-install the driver. Cups interface say: Could not copy ppd file. Reinstall the driver from rpm did not work.. like in the wiki.

Every time i try this:

Code: Select all

# rpm -i --nodeps --replacepkgs dcp135clpr-1.0.1-1.i386.rpm

all seem to work fine. But the cupswrapper don't.

Code: Select all

# rpm -i --nodeps --replacepkgs dcp135ccupswrapper-1.0.1-1.i386.rpm 
lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.
lpadmin: Öffnen der PPD "/tmp/077c45d7f27f0": Ungültige Option-Schlüsselwort-Zeichenkette in Zeile 229 nicht möglich.

With cupstestppd i got a german error message:

Code: Select all

 # cupstestppd /tmp/077c45d7f27f0 
/tmp/077c45d7f27f0: FAIL
      **FAIL**  Unable to open PPD file - Ungültige Option-Schlüsselwort-Zeichenkette on line 229.
                REF: Seite 19, Kap. 3.3.

The English Translation is:

Code: Select all

lpadmin: Unable to open PPD "/tmp/077c45d7f27f0": Illegal option keyword
string on line 229.

The Solution i found here.

smolny wrote:-edit your .ppd file, changing each? occurence of word "Custom" to
"Other", and save :)

However the rpm cupswrupper did not run through, but i got the same file in /usr/share/cups/model/brdcp135c.ppd (from lp driver?) where i change the line

*OpenGroup: Image Type
*%=== Document ================================
*OpenUI *BRDocument/ Image Type: PickOne
*OrderDependency: 21 AnySetup *BRDocument
*DefaultBRDocument: Photo
*BRDocument Photo/Photo: ""
*BRDocument Graphics/Graphics: ""
*BRDocument Other/Other: ""
*CloseUI: *BRDocument

From:
*BRDocument custom/custom: ""
to:
*BRDocument Other/Other: ""

It works. If i add the printer again through the Browsers administration http://localhost:631

Edit: 2019-10-03 Update:
Printer Works but a old issue appear again: On some Programs the Default PageSize was set to the US Papersize Format "Letter".
I try to edit the filter for this printer becaus other Discussions told me to do so...

/usr/share/cups/model/brdcp135c.ppd
/usr/share/ppd/brdcp135c.ppd
/usr/lib/cups/filter/cupswrapperdcp135c
/usr/libexec/cups/filter/cupswrapperdcp135c

..and set the Value from Letter to, in my case to A4.

*DefaultPageSize: A4
*DefaultPageRegion: A4
*DefaultImageableArea: A4

....which did not solve the issue. But after i changed one mone Setting it worked, the Letter-Paper-Format solved:

/usr/local/Brother/Printer/dcp135c/inf/brdcp135crc

a changing the PaperType=A4