Code: Select all
>>> Unpacking source...
>>> Unpacking psi-0.10.tar.bz2 to /var/tmp/portage/net-im/psi-0.10-r4/work
>>> Unpacking psi_pl-0.9.3-1.tar.bz2 to /var/tmp/portage/net-im/psi-0.10-r4/work
[32;01m*[0m Applying psi-pathfix2.patch ...
[A[72C [34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Applying psi-desktop2.patch ...
[A[72C [34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Applying psi-reverse_trayicon2.patch ...
[A[72C [34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Applying psi-0.10-gpg2.patch ...
[A[72C [34;01m[ [32;01mok[34;01m ][0m
[33;01m*[0m You are going to install the original psi version. You might want to
[33;01m*[0m try the version with extra unsuported patches by adding 'extras' to
[33;01m*[0m your use flags.
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/net-im/psi-0.10-r4/work/psi-0.10 ...
Configuring Psi ...
Verifying Qt 3.x Multithreaded (MT) build environment ... ok
Checking for Qt >= 3.1 ... yes
Checking for QCA 1.0 ... no
Error: need QCA 1.0!
ERROR: net-im/psi-0.10-r4 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 2464: Called die
The specific snippet of code:
./configure --prefix=/usr --with-qca-inc=/usr/include --with-qca-lib=/usr/lib ${myconf} || die "Configure failed";
The die message:
Configure failed
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/tmp/portage/net-im/psi-0.10-r4/temp/build.log'.
The ebuild environment file is located at '/var/tmp/portage/net-im/psi-0.10-r4/temp/environment'.
