Code: Select all
(EE) No Input driver matching `mouse'
(EE) No Input driver matching `kbd'
Code: Select all
INPUT_DEVICES="keyboard mouse"ik dnek helemaal niet dat het probleem bij de videokaart ligt. ik vermeldde het omdat er problemen zijn met de X server en ik dus nvidia-drivers gebruik..garo wrote:Staat er iets vreemd in de dmesg ?
Waarom vermoed je dat het probleem bij de videokaart ligt ?
Gebruik je nvidia-drivers ?
Code: Select all
emerge -pv xf86-input-keyboardhet was niet geinstalleerd.BlackEdder wrote:Is xf86-input-keyboard geinstalleerd?
, check voor de R (reinstall) niet een I (install)Code: Select all
emerge -pv xf86-input-keyboard
Code: Select all
*
* ERROR: x11-drivers/xf86-input-keyboard-1.1.1 failed.
* Call stack:
* ebuild.sh, line 1701: Called dyn_compile
* ebuild.sh, line 1039: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 1383: Called x-modular_src_compile
* x-modular.eclass, line 348: Called x-modular_src_make
* x-modular.eclass, line 343: Called die
* The specific snippet of code:
* emake || die "emake failed"
* The die message:
* emake failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-drivers/xf86-input-keyboard-1.1.1/temp/build.log'.
*
Code: Select all
checking bla bla .. de hele lijst ken je wel
checking for i686-pc-linux-gnu-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for XORG... yes
checking for ANSI C header files... (cached) yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: executing depfiles commands
make all-recursive
make[1]: Entering directory `/var/tmp/portage/x11-drivers/xf86-input-keyboard-1. 1.1/work/xf86-input-keyboard-1.1.1'
Making all in src
make[2]: Entering directory `/var/tmp/portage/x11-drivers/xf86-input-keyboard-1. 1.1/work/xf86-input-keyboard-1.1.1/src'
if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2 -mtune=i686 -pipe -march=pentium3 -fomit-frame-pointer -I/usr/include/xor g -I/usr/include/pixman-1 -I../src -MT kbd.lo -MD -MP -MF ".deps/kbd.Tpo" -c -o kbd.lo kbd.c; \
then mv -f ".deps/kbd.Tpo" ".deps/kbd.Plo"; else rm -f ".deps/kbd.Tpo"; exit 1; fi
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2 -mtune=i686 -pipe -march=pentium3 -fomit-f rame-pointer -I/usr/include/xorg -I/usr/include/pixman-1 -I../src -MT kbd.lo -MD -MP -MF .deps/kbd.Tpo -c kbd.c -fPIC -DPIC -o .libs/kbd.o
kbd.c:45:23: error: xf86OSKbd.h: No such file or directory
kbd.c: In function 'KbdPreInit':
kbd.c:220: error: 'KbdDevPtr' undeclared (first use in this function)
kbd.c:220: error: (Each undeclared identifier is reported only once
kbd.c:220: error: for each function it appears in.)
kbd.c:220: error: expected ';' before 'pKbd'
kbd.c:237: error: 'struct _LocalDeviceRec' has no member named 'motion_history_p roc'
kbd.c:256: error: 'pKbd' undeclared (first use in this function)
kbd.c:256: error: 'KbdDevRec' undeclared (first use in this function)
kbd.c: In function 'KbdBell':
kbd.c:364: error: 'KbdDevPtr' undeclared (first use in this function)
kbd.c:364: error: expected ';' before 'pKbd'
kbd.c:365: error: 'pKbd' undeclared (first use in this function)
kbd.c: In function 'UpdateLeds':
kbd.c:372: error: 'KbdDevPtr' undeclared (first use in this function)
kbd.c:372: error: expected ';' before 'pKbd'
kbd.c:375: error: 'pKbd' undeclared (first use in this function)
kbd.c: In function 'KbdCtrl':
kbd.c:390: error: 'KbdDevPtr' undeclared (first use in this function)
kbd.c:390: error: expected ';' before 'pKbd'
kbd.c:393: error: 'pKbd' undeclared (first use in this function)
kbd.c: In function 'InitKBD':
kbd.c:419: error: 'KbdDevPtr' undeclared (first use in this function)
kbd.c:419: error: expected ';' before 'pKbd'
kbd.c:457: error: 'pKbd' undeclared (first use in this function)
kbd.c: In function 'KbdProc':
kbd.c:481: error: 'KbdDevPtr' undeclared (first use in this function)
kbd.c:481: error: expected ';' before 'pKbd'
kbd.c:488: error: 'pKbd' undeclared (first use in this function)
kbd.c: In function 'PostKbdEvent':
kbd.c:561: error: 'KbdDevPtr' undeclared (first use in this function)
kbd.c:561: error: expected ';' before 'pKbd'
kbd.c:581: error: 'pKbd' undeclared (first use in this function)
kbd.c:602: error: 'TransMapPtr' undeclared (first use in this function)
kbd.c:602: error: expected ';' before 'map'
kbd.c:603: error: 'map' undeclared (first use in this function)
kbd.c:618: error: expected ';' before 'map'
make[2]: *** [kbd.lo] Error 1
make[2]: Leaving directory `/var/tmp/portage/x11-drivers/xf86-input-keyboard-1.1 .1/work/xf86-input-keyboard-1.1.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/x11-drivers/xf86-input-keyboard-1.1 .1/work/xf86-input-keyboard-1.1.1'
make: *** [all] Error 2
*
* ERROR: x11-drivers/xf86-input-keyboard-1.1.1 failed.
* Call stack:
* ebuild.sh, line 1701: Called dyn_compile
* ebuild.sh, line 1039: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 1383: Called x-modular_src_compile
* x-modular.eclass, line 348: Called x-modular_src_make
* x-modular.eclass, line 343: Called die
* The specific snippet of code:
* emake || die "emake failed"
* The die message:
* emake failed
*
* If you need support, post the topmost build error, and the call stack if rele vant.
* A complete build log is located at '/var/tmp/portage/x11-drivers/xf86-input-k eyboard-1.1.1/temp/build.log'.
*
Taipou wrote:Probeer altijd zoveel mogelijk informatie te verschaffen. Waar het ook aan zou kunnen liggen is je Xorg.conf configuratie. Post dus ook even je /etc/X11/xorg.conf , als je wil.
Code: Select all
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "be"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2" # PS/2 Mouse
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "NEC"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 82.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "mx440"
Driver "nvidia"
VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "mx440"
Monitor "NEC"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Code: Select all
$ qfile /usr/include/xorg/xf86OSKbd.h
x11-base/xorg-server (/usr/include/xorg/xf86OSKbd.h)