2.6.24-rc2-kamikaze1: "020618"

[Waninkoko]

· KAMIKAZE-SOURCES ::.
· 2.6.24-rc2-kamikaze1: "020618"



New version of "kamikaze-sources" !!

NOTE: I don't like to release "-rc" versions but .24-rc kernel is really really GREAT.

Links:

Homepage: http://kamikaze.waninkoko.info

Ebuild: kamikaze-sources-2.6.24_rc2-r1.ebuild
Patch: linux-2.6.24-rc2-kamikaze1.bz2
Broken-out: broken-out-2.6.24-rc2-kamikaze1.tar.bz2
Broken-Out patches:http://kamikaze.waninkoko.info/patches/2.6.24/kamikaze1/broken-out


Also on custom-kernels overlay!

What's new:

New kernel, many patches added/updated (genetic support for all three i/o schedulers).

Changes in this version:

"sched-cfs-boost" patch updated.
"sched-cfs-tunables" patch updated.
"genetic-deadline-sched" patch added.
"genetic-cfq-sched" patch added.
"ckpatches" patch updated.
"genpatches" patch updated.
"badram" patch added.
"tuxonice" patch updated.
"pm_qos" patch updated.
"thinkpad" patch updated.
"ext4-updates" patch updated.
"reiser4" patch updated.
"unionfs" patch updated.
"btrfs" patch updated.
"shadow-directories" patch updated.
"libata-async-scan" patch updated.
"cpu-support-rollup" patch updated.
"gspca" patch updated.
"ssb-pci-set-power-state" patch added.
"b44-power-down" patch updated.
"mac80211-power-management" patch added.
"ipw3945" patch updated.
"remove-duplicated-include-entry" patch added.

Patches:

# Completely Fair Scheduler patches
sched-cfs-boost-2.6.24.patch
sched-cfs-tunables-2.6.24.patch

# Genetic patches
genetic-lib-2.6.24.patch
genetic-io-sched-2.6.24.patch
genetic-as-sched-2.6.24.patch
genetic-deadline-sched-2.6.24.patch
genetic-cfq-sched-2.6.24.patch

# Con Kolivas patchset
ckpatches-2.6.24.patch

# gentoo-sources patchset
genpatches-2.6.24.patch

# 432/864 HZ kconfig
hz-432-kconfig-option.patch
hz-864-kconfig-option.patch

# BadRAM
badram-2.6.24.patch

# TuxOnIce
tuxonice-3.0-rc2-for-2.6.24.patch

# Linux-PHC
linux-phc-0.3.1-2.6.24.patch

# edac patches
edac-2.6.23-for-2.6.24.patch

realtime-lsm-2.6.24.patch

# Powersaving patches
powertop-2.6.24.patch
pm_qos-2.6.24.patch

# ACPI patches
acer-acpi-2.6.24.patch
fujitsu-laptop-extras-2.6.24.patch
thinkpad-2.6.24.patch

# Filesystems patches
ext4-updates-2.6.24.patch
reiser4-2.6.24.patch
squashfs-lzma-2.6.24.patch
unionfs-2.6.24.patch
aufs-cvs-0710115-2.6.24.patch
btrfs-0.8-2.6.24.patch
shadow-directories-2.6.24.patch

# Disk I/O patches
improve-relatime-2.6.24.patch

# ATA/SATA patches
libata-async-scan-2.6.24.patch

cpu-support-rollup-2.6.24.patch

# Video4Linux
gspca-20070508-2.6.24.patch

# Ethernet patches
ssb-pci-set-power-state-2.6.24.patch
b44-power-down-2.6.24.patch

# Wireless patches
mac80211-power-management-2.6.24.patch

# Wireless drivers
ipw3945-1.2.2-2.6.24.patch

# Misc patches
remove-duplicated-include-entry.patch
silence-deprecated-warnings-2.6.24.patch
colored-printk-output-2.6.24.patch
enable-4k-stacks-default-2.6.24.patch
build-id-sandbox-violation.patch
gcc-4.3.0-compilation-fix.patch
kamikaze-version.patch

Greetings.

[dodo1122]

Thank you! .24 is (by far) the best kernel release for a looong time imho .



dodo

[oRDeX]

Let's compile

[Dagger]

I start using your kernel-sources and I'm loving it!

Waninkoko is there any chance you could include some acpi4asus patches in next release please?

[wrc1944]

Compiles, boots, and runs great here, with no problems! Great job! Many thanks for getting a 2.6.24-rcx-kamikaze out so quick!

First subjective impression is that it's fast and responsive. The CFQ scheduler seems a little more responsive on my system than it had previously.

[dodo1122]

The only problem i have with .24 is that nvidia-drivers do not compile for me :/.

Code: Select all

>>> Emerging (1 of 1) x11-drivers/nvidia-drivers-100.14.23 to /
 * NVIDIA-Linux-x86-100.14.23-pkg0.run RMD160 SHA1 SHA256 size ;-) ...    [ ok ]
 * checking ebuild checksums ;-) ...                                      [ ok ]
 * checking auxfile checksums ;-) ...                                     [ ok ]
 * checking miscfile checksums ;-) ...                                    [ ok ]
 * checking NVIDIA-Linux-x86-100.14.23-pkg0.run ;-) ...                   [ ok ]
 * Active CFLAGS = -march=nocona -mtune=generic -O2 -pipe -fomit-frame-pointer
 * Active CXXFLAGS = -march=nocona -mtune=generic -O2 -pipe -fomit-frame-pointer -fvisibility-inlines-hidden
 * Active LDFLAGS = -Wl,-O1 -Wl,-z,now -Wl,--as-needed -Wl,--hash-style=gnu -Wl,--enable-new-dtags -Wl,--sort-common -s
 * Active FEATURES = distlocks metadata-transfer parallel-fetch sandbox sfperms strict unmerge-orphans userfetch
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found kernel object directory:
 *     /lib/modules/2.6.24-rc2-kamikaze1/build
 * Found sources for kernel version:
 *     2.6.24-rc2-kamikaze1
 * Checking for MTRR support ...                                          [ ok ]
>>> Unpacking source...
Creating directory NVIDIA-Linux-x86-100.14.23-pkg0
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86 100.14.23.............................................................................................................................
 * Applying NVIDIA_glx-defines.patch ...                                  [ ok ]
 * Applying NVIDIA_glx-glheader.patch ...                                 [ ok ]
 * Applying NVIDIA_i2c-hwmon.patch ...                                    [ ok ]
 * Converting Makefile.kbuild to use M= instead of SUBDIRS= ...           [ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/x11-drivers/nvidia-drivers-100.14.23/work/NVIDIA-Linux-x86-100.14.23-pkg0/usr/src/nv ...
 * Preparing nvidia module
sh ./conftest.sh "i686-pc-linux-gnu-gcc" "i686-pc-linux-gnu-gcc" /usr/src/linux /lib/modules/2.6.24-rc2-kamikaze1/build cc_sanity_check full_output
rm -f Makefile
sh ./conftest.sh "i686-pc-linux-gnu-gcc" "i686-pc-linux-gnu-gcc" /usr/src/linux /lib/modules/2.6.24-rc2-kamikaze1/build select_makefile full_output
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.

If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.

Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.

*** Unable to determine the target kernel version. ***

make: *** [select_makefile] Error 1
 * 
 * ERROR: x11-drivers/nvidia-drivers-100.14.23 failed.
 * Call stack:
 *                         ebuild.sh, line 1701:  Called dyn_compile
 *                         ebuild.sh, line 1039:  Called qa_call 'src_compile'
 *                         ebuild.sh, line   44:  Called src_compile
 *   nvidia-drivers-100.14.23.ebuild, line  212:  Called linux-mod_src_compile
 *                  linux-mod.eclass, line  518:  Called die
 * The specific snippet of code:
 *                      emake HOSTCC="$(tc-getBUILD_CC)" CC="$(get-KERNEL_CC)" LDFLAGS="$(get_abi_LDFLAGS)" \
 *                                ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} \
 *                              || die "Unable to make ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}."
 *  The die message:
 *   Unable to make  IGNORE_CC_MISMATCH=yes V=1 SYSSRC=/usr/src/linux SYSOUT=/lib/modules/2.6.24-rc2-kamikaze1/build clean module.
 * 
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-100.14.23/temp/build.log'.
 * 

Anyone knows how to fix it? It compiles with .23 kernel
The workaround i use for getting it to work is to change the kernel name in the Makefile (usually from -rc2-kamikaze1 to -kamikaze1 or something similar), so nvidia-drivers uses a clean /lib/modules dir, and then it compiles.

Any ideas?

dodo

[DocterD]

Is btrfs already useable?

[gimpel]

The only problem i have with .24 is that nvidia-drivers do not compile for me :/.

W.F.M.[tm] - 100.14.23 built w/o problems here against -rc2-kamikaze1.

The kernel works great! Genetics ftw!
Thanks once more!

[broch]

same problem (and the same error):
can't built nvidia drivers (100.14.23) with 2.6.24-rc2

I have seen also a report with similar issue on nvidia linux forum.
It seems related to whatever kernel changes not kamikaze patches of course.

[hirakendu]

ps : still couldn't decipher 020618 :p. hints?

[stalnation]

@Waninkoko:
iwlwifi is not ready for 2.6.24 yet?

@all:
did somebody test it with ati fglrx 8.42.3?

[gimpel]

Hm, I just realized that one of my cpu's cores is using constantly 100% cpu. Though top/htop/anything does not show a process causing this. The cpu load is pretty constantly 1.0 - no matter if X is running or not.

Kernel config is pretty much the same as with .23-kamikaze5, and I also haven't seen this on .24-rc1-preview1

How can I find out what causes that load, if it is not caused by a process?

[Waninkoko]

@Waninkoko:
iwlwifi is not ready for 2.6.24 yet?

Lastest iwlwifi doesn't work with .24 but I think I'll stay with iwlwifi kernel driver.

[Kollin]

A little problem here, heeeeeeeeeeeeeeeeeeeeelp

Code: Select all

patching file usbusx2yaudio.c
Hunk #10 succeeded at 1057 (offset -1 lines).
copying file alsa-kernel/usb/usx2y/usbusx2y.c
patching file usbusx2y.c
copying file alsa-kernel/usb/usx2y/usx2yhwdeppcm.c
patching file usx2yhwdeppcm.c
make[3]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/usb/usx2y'
make[2]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/usb'
make[2]: Entering directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia'
make[3]: Entering directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/pdaudiocf'
make[3]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/pdaudiocf'
make[3]: Entering directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/vx'
make[3]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/vx'
make[2]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia'
make[1]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15'
make -C /usr/src/linux M=/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15 O=/usr/src/linux CPP="x86_64-pc-linux-gnu-gcc -E" CC="x86_64-pc-linux-gnu-gcc" modules
make[1]: Entering directory `/usr/src/linux-2.6.24-rc2-kamikaze1'
Makefile:119: *** Output directory (O=...) specifies kernel src dir.  Stop.
make[1]: Leaving directory `/usr/src/linux-2.6.24-rc2-kamikaze1'
make: *** [compile] Error 2
 *
 * ERROR: media-sound/alsa-driver-1.0.15 failed.
 * Call stack:
 *                   ebuild.sh, line 1701:  Called dyn_compile
 *                   ebuild.sh, line 1039:  Called qa_call 'src_compile'
 *                   ebuild.sh, line   44:  Called src_compile
 *   alsa-driver-1.0.15.ebuild, line  143:  Called die
 * The specific snippet of code:
 *      emake LDFLAGS="$(raw-ldflags)" HOSTCC="$(tc-getBUILD_CC)" CC="$(tc-getCC)" || die "Make Failed"
 *  The die message:
 *   Make Failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/media-sound/alsa-driver-1.0.15/temp/build.log'.
 *

[dodo1122]

looks like another dreaded driver issue with .24 . Just use alsa in the kernel.


dodo

[broch]

easy fix for nvidia driver installation:
create softlink in
/usr/src/linux-2.6.24-rc2/include

ln -s asm-x86 asm-i386

next install nvidia driver

ref:
http://www.nvnews.net/vbulletin/showthr ... 1&t=101850



however, now, when I can boot to KDE:
ACPI panel is gone

[Waninkoko]

A little problem here, heeeeeeeeeeeeeeeeeeeeelp

Code: Select all

patching file usbusx2yaudio.c
Hunk #10 succeeded at 1057 (offset -1 lines).
copying file alsa-kernel/usb/usx2y/usbusx2y.c
patching file usbusx2y.c
copying file alsa-kernel/usb/usx2y/usx2yhwdeppcm.c
patching file usx2yhwdeppcm.c
make[3]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/usb/usx2y'
make[2]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/usb'
make[2]: Entering directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia'
make[3]: Entering directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/pdaudiocf'
make[3]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/pdaudiocf'
make[3]: Entering directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/vx'
make[3]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia/vx'
make[2]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15/pcmcia'
make[1]: Leaving directory `/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15'
make -C /usr/src/linux M=/var/tmp/portage/media-sound/alsa-driver-1.0.15/work/alsa-driver-1.0.15 O=/usr/src/linux CPP="x86_64-pc-linux-gnu-gcc -E" CC="x86_64-pc-linux-gnu-gcc" modules
make[1]: Entering directory `/usr/src/linux-2.6.24-rc2-kamikaze1'
Makefile:119: *** Output directory (O=...) specifies kernel src dir.  Stop.
make[1]: Leaving directory `/usr/src/linux-2.6.24-rc2-kamikaze1'
make: *** [compile] Error 2
 *
 * ERROR: media-sound/alsa-driver-1.0.15 failed.
 * Call stack:
 *                   ebuild.sh, line 1701:  Called dyn_compile
 *                   ebuild.sh, line 1039:  Called qa_call 'src_compile'
 *                   ebuild.sh, line   44:  Called src_compile
 *   alsa-driver-1.0.15.ebuild, line  143:  Called die
 * The specific snippet of code:
 *      emake LDFLAGS="$(raw-ldflags)" HOSTCC="$(tc-getBUILD_CC)" CC="$(tc-getCC)" || die "Make Failed"
 *  The die message:
 *   Make Failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/media-sound/alsa-driver-1.0.15/temp/build.log'.
 *

I think kernel's alsa is 1.0.15 or very similar (I had to drop my alsa patch).

[tallica]

Code: Select all

# soundon
Relinking OSS kernel modules for "2.6.24-rc2-kamikaze1 SMP preempt mod_unload CORE2 "
This may take few moments - please stand by...

OSS build environment set up for REGPARM kernels

Building module osscore
Failed to compile OSS
make -C /lib/modules/2.6.24-rc2-kamikaze1/build M=/usr/lib/oss/build modules
make[1]: Wejście do katalogu `/usr/src/linux-2.6.24-rc2-kamikaze1'
  CC [M]  /usr/lib/oss/build/osscore.o
/usr/lib/oss/build/osscore.c: In function ‘oss_register_interrupts’:
/usr/lib/oss/build/osscore.c:1633: error: ‘SA_SHIRQ’ undeclared (first use in this function)
/usr/lib/oss/build/osscore.c:1633: error: (Each undeclared identifier is reported only once
/usr/lib/oss/build/osscore.c:1633: error: for each function it appears in.)
make[2]: *** [/usr/lib/oss/build/osscore.o] Błąd 1
make[1]: *** [_module_/usr/lib/oss/build] Błąd 2
make[1]: Opuszczenie katalogu `/usr/src/linux-2.6.24-rc2-kamikaze1'
make: *** [default] Błąd 2

Relinking the OSS kernel modules failed

I guess its .24 kernel problem... ? So some patch for OSS4 is needed.

EDIT:

Fixed... I've replaced ‘SA_SHIRQ’ with ‘IRQF_SHARED’

[hoacker]

Error during kernel compile:

Code: Select all

  CC      mm/page_alloc.o
mm/page_alloc.c: In function 'badram_markpages':
mm/page_alloc.c:3056: error: 'mem_map' undeclared (first use in this function)
mm/page_alloc.c:3056: error: (Each undeclared identifier is reported only once
mm/page_alloc.c:3056: error: for each function it appears in.)
mm/page_alloc.c: In function 'badram_setup':
mm/page_alloc.c:3082: error: 'mem_map' undeclared (first use in this function)
mm/page_alloc.c:3086: warning: passing argument 3 of 'get_longoptions' from incompatible pointer type
make[1]: *** [mm/page_alloc.o] Error 1
make: *** [mm] Error 2

[dodo1122]

easy fix for nvidia driver installation:
create softlink in
/usr/src/linux-2.6.24-rc2/include

ln -s asm-x86 asm-i386

next install nvidia driver

ref:
http://www.nvnews.net/vbulletin/showthr ... 1&t=101850



however, now, when I can boot to KDE:
ACPI panel is gone

Thank you! it works now .

dodo

[Cobra78]

Compile Fine, even the nVidia Drivers but........i got a kernel panic: attempting to kill init at reboot

[jonnevers]

Code: Select all

user host ~ $ uname -a
Linux blue 2.6.24-rc2-kamikaze1 #1 SMP Wed Nov 7 18:38:46 EST 2007 x86_64 AMD Athlon(tm) 64 Processor 3700+ AuthenticAMD GNU/Linux

unified arch/x86!

colored kernel messages are neat too.

nvidia-drivers-100.14.19 working fine with the above asm-i386 -> asm-x86 soft link.

[ejs76]

Is btrfs already useable?

No, definitely not! For testing only...

From the project page http://oss.oracle.com/projects/btrfs/ :

The Btrfs disk format is not yet finalized, and it currently does not handle disk full conditions at all. Things are under heavy development, and Btrfs is not suitable for any uses other than benchmarking and review.

But IMHO it seems to be progressing faster then ext4...

You might want to keep an I on this thread: http://forums.gentoo.org/viewtopic-t-56 ... art-0.html

@Waninkoko: keep up the good work!

[sss123NEXT]

i have problem with virtualbox compilation (both 1.5.2 and svn ebuilds), here some compilation log:

Code: Select all

kBuild: Compiling RuntimeR0Drv - common/misc/sanity-c.c
kBuild: Compiling RuntimeR0Drv - r0drv/linux/alloc-r0drv-linux.c
In file included from /var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/include/iprt/types.h:73,
                 from /var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/src/VBox/Runtime/common/misc/sanity.h:20,
                 from /var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/src/VBox/Runtime/common/misc/sanity-c.c:19:
/lib/modules/2.6.24-rc2-kamikaze1-sss-test-build/build/include/linux/types.h:40: error: redefinition of typedef 'uintptr_t'
/var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/include/iprt/stdint.h:118: error: previous declaration of 'uintptr_t' was here
kmk[3]: *** 

..................................

/var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/out/linux.x86/release/obj/src/VBox/Runtime/RuntimeR0Drv/r0drv/linux/alloc-r0drv-linux.o /var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/src/VBox/Runtime/r0drv/linux/alloc-r0drv-linux.c
kmk[3]: Leaving directory `/var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/src/VBox/Runtime'
kmk[2]: *** [pass_libraries_before] Error 2
kmk[2]: Leaving directory `/var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/src/VBox'
kmk[1]: *** [pass_libraries_before] Error 2
kmk[1]: Leaving directory `/var/tmp/paludis/app-emulation/virtualbox-9999/work/virtualbox-9999/src'
kmk: *** [pass_libraries_before] Error 2

!!! ERROR in app-emulation/virtualbox-9999:
!!! In src_compile at line 4633
!!! kmk failed

!!! Call stack:
!!!    * src_compile (/var/tmp/paludis/app-emulation/virtualbox-9999/temp/loadsaveenv:4633)
!!!    * ebuild_f_compile (/usr/libexec/paludis/src_compile.bash:51)
!!!    * ebuild_main (/usr/libexec/paludis/ebuild.bash:429)
!!!    * main (/usr/libexec/paludis/ebuild.bash:447)

diefunc: making ebuild PID 17362 exit with error
die trap: exiting with error.

Install error:
  * In program paludis -i virtualbox:
  * When performing install action from command line:
  * When executing install task:
  * When installing 'app-emulation/virtualbox-9999:0::gentoo':
  * Install error: Install failed for 'app-emulation/virtualbox-9999:0::gentoo'

when i have big errors log, and can post it somewhere if it helps ...., here just begin and end

[rada]

odd, grub throws error 24: Attempt to access block outside partition, when i try to boot this kernel, 2.6.23-kamikaze5 works fine..