[X11] GMA950 / monitor analogowy

Message

Ravak · Post by **Ravak** » Thu Jun 07, 2007 1:11 pm

Mam laptopa MAXDATA, a w środku:

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 11)
07:01.0 CardBus bridge: Texas Instruments Unknown device 8039
07:01.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a
07:01.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
07:01.3 Generic system peripheral [0805]: Texas Instruments Unknown device 803c

Po całonocnych bojach, udało mi się skonfigurować większość urządzeń. Pozostał tylko xorg i grafika. Skorzystałem z Xorg -configure + poprawianie. Relutat:

Code: Select all

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen         "Screen0"
        Screen         "Screen1"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/share/X11/rgb"
        ModulePath   "/usr/lib64/xorg/modules"
        FontPath     "/usr/share/fonts/misc/"
        FontPath     "/usr/share/fonts/TTF/"
        FontPath     "/usr/share/fonts/OTF"
        FontPath     "/usr/share/fonts/Type1/"
        FontPath     "/usr/share/fonts/100dpi/"
        FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
        Load  "xtrap"
        Load  "dri"
        Load  "GLcore"
        Load  "record"
        Load  "glx"
        Load  "extmod"
        Load  "dbe"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbRules"  "xorg"
        Option      "XkbLayout" "pl"
        Option      "XkbModel"  "pc105"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Maxwell"
        ModelName    "Laptop"
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Samsung"
        ModelName    "913N"
        #Option       "DPMS"
        #HorizSync    30-81
        #VertRefresh  56-75
        #HorizSync     28-50
        #VertRefresh   43-75
        HorizSync      30-82
        VertRefresh    40-60
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "i810"
        VendorName  "Intel Corporation"
        BoardName   "Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Device"
        Identifier  "Card1"
        Driver      "i810"
        VendorName  "Intel Corporation"
        BoardName   "Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"
        BusID       "PCI:0:2:1"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Depth     16
                Modes     "1280x800" "1280x1024" 
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes     "1280x800" "1280x1024"
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Card1"
        Monitor    "Monitor1"
        SubSection "Display"
                Depth    16
                Modes    "1280x1024" "1024x786"
        EndSubSection
        SubSection "Display"
                Depth    24
                Modes    "1280x1024" "1024x786"
        EndSubSection
EndSection

Niestety, nie działa to jak oczekiwałem. Załączany jest tylko ekran w laptopie - monitor (wyjście cyfrowe z karty -> przejściówka na analog) - albo nic nie wyświetla albo pionowy pasek po prawej stronie (wygląda na niską rozdzielczość). Jednakże randr -s 0 włącza monitor (Samsung 913N), rozdzielczość 1024x786 wyłączając ekran laptopa (nie da się powrócić na niego).

xranrd zwraca:

Code: Select all

Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1280 x 1280
VGA connected 1024x768+0+0 (normal left inverted right) 0mm x 0mm
   1024x768       60.0* 
   800x600        60.3  
   640x480        59.9  
LVDS connected (normal left inverted right)
   1280x800       59.9 +
   1024x768       60.0  
   800x600        60.3  
   640x480        59.9  
TMDS-1 connected (normal left inverted right)
   1024x768       60.0  
   800x600        60.3  
   640x480        59.9  
TV disconnected (normal left inverted right)

Zapewne mam bałagan i opatrznie coś zrozumiałem podczas googlania. Byłbym wdzięczny, za pomoc w uporządkowaniu / poprawieniu konfiguracji. Zależy mi na niewłączaniu wbudowanego ekranu (konsola pracuje na framebuferze w rozdzielczości 1280x1024) i uzyskaniu rozdzielczości 1280x1024.

Ps. Jeszcze jakby grub przy uruchamianiu automatycznie przełączał z wbudowanego na zewnętrzny ekran...