x11-proto/kbproto-1.0.2 MD5 checksum fails

Message

Paapaa · Post by **Paapaa** » Fri Jun 30, 2006 6:12 pm

Emerging the new modular (stable) xorg-x11 fails because kbproto-1.0.2 doesn't pass MD5 verification. I can't paste the actual error message as I can't access WWW with Gentoo now. I tried "emerge --sync" but it didn't help. I also tried "--fetchonly" with no lock. What might be the problem here?

Norbie Landers · Post by **Norbie Landers** » Fri Jun 30, 2006 6:22 pm

Same problem here.

Code: Select all

>>> Emerging (1 of 120) x11-proto/kbproto-1.0.2 to /
>>> checking ebuild checksums ;-)
>>> checking auxfile checksums ;-)
>>> checking miscfile checksums ;-)
>>> checking kbproto-1.0.2.tar.bz2
!!! Digest verification failed:
!!! /usr/portage/distfiles/kbproto-1.0.2.tar.bz2
!!! Reason: Failed on MD5 verification
!!! Got: 3ae193c317a3621966c3c53d83a254f4
!!! Expected: 77d889b21a827409f8dd40f8bfc68a12

I tried fixing the digest but then I got a similar problem with x11-proto/xextproto-7.0.2.

morphal · Post by **morphal** » Fri Jun 30, 2006 6:42 pm

Add another person with a problem to the list. I have the same problem, exact same md5 sums as well, but that's to be expected.

Additionally though, I already rm-ed the file and re-synced, which failed. I noticed that it was downloading from distfiles.gentoo.org so I rm-ed it again and grabbed the file from OSU and ibiblio, with the same results both times. Dare I blame it on Portage again? Something's up though.

Kaddy · Post by **Kaddy** » Fri Jun 30, 2006 7:02 pm

I managed to fix this problem. it was fairly simple, but a pain the the ass because you have to do it a few times

Code: Select all

ebuild /usr/portage/x11-proto/kbproto/kbproto-1.0.2.ebuild digest && emerge --resume

that should do the trick for you

afaik, this is a problem with several of the packages in the xorg-x11-7 update

as an added side note, you'll have to do this AFTER you download the file itself, not before, the MD5 verification WILL fail.... again

ctrawick · Post by **ctrawick** » Fri Jun 30, 2006 7:46 pm

Continuing from another thread, so this info doesn't get buried.

Check out [bug=135715]this old annoyance.[/bug] Looks like freedesktop.org did it again. I've also been bit by this on the following packages (will post more as I work through the digests):

media-fonts/encodings
x11-proto/fontcacheproto
x11-apps/bdftopcf
x11-proto/xf86rushproto
x11-proto/xf86vidmodeproto
x11-proto/evieext
x11-misc/makedepend (!!!) See below
x11-proto/printproto
x11-libs/libXp
x11-proto/randrproto
media-fonts/font-bh-type1

The workaround is to "ebuild <ebuildfile> digest" for each of these packages. For example:

Code: Select all

ebuild /usr/portage/x11-apps/bdftopcf/bdftopcf-1.0.0.ebuild digest

NOTE THAT THIS IS NOT A FIX!! Forcing digests using ebuild defeats the purpose of having digests in the first place. If I were you, I'd just skip the packages if possible until the package maintainers certify that the sources are still good. For all we know, freedesktop.org has been compromised again.

If it's not stupid coder tricks, then the digests will have to be redone and distributed. Probably have to file a new bug and/or reopen the [bug=135715]old one[/bug].

(!!!) I was having trouble digesting x11-misc/makedepend. It kept saying that it couldn't be downloaded. I ended up putting it in my portage overlay and digesting it there instead. Not sure what the difference is, but that's the fix.

tane_stelzer · Post by **tane_stelzer** » Fri Jun 30, 2006 8:05 pm

OK did what u said and now i get this error

Code: Select all

100%[=====================>] 36,750      56.49K/s
20:43:41 (56.27KB/s) '/usr/portage/distfiles/xcmiscproto-1.1.2.tar.bz2' saved [36750/36750]
!!! Couldn't download xcmiscproto-1.1.2.tar.bz2 Aborting

Man this is annoying cos i dont have xorg now nth works....
Can someone help me
Tane

morphal · Post by **morphal** » Fri Jun 30, 2006 8:09 pm

Skipping kbproto got seven more packages compiled before emerge failed because of the missing package. Skipping that one immediately caused the next one to fail. Skipping didn't really help. =/

As you said, there are workarounds but I always hate mucking up digests that I know were put there on purpose. Rather fantastic that we had this little hiccough just as modular X got stable.

Edit: I also can't emerge NAIM because the file sizes don't match. This, combined with the other guy's inability to download the source for a file and the obvious issues with kbproto ... I'd say there's a larger problem at work here. =)

tane_stelzer · Post by **tane_stelzer** » Fri Jun 30, 2006 8:20 pm

well i tried the tip by Kaddy and it works but i have to do it nearly every 2nd package....
tane

slaterson · Post by **slaterson** » Fri Jun 30, 2006 8:23 pm

tane_stelzer wrote:OK did what u said and now i get this error
Code: Select all
100%[=====================>] 36,750      56.49K/s
20:43:41 (56.27KB/s) '/usr/portage/distfiles/xcmiscproto-1.1.2.tar.bz2' saved [36750/36750]
!!! Couldn't download xcmiscproto-1.1.2.tar.bz2 Aborting
Man this is annoying cos i dont have xorg now nth works....
Can someone help me
Tane

i am getting the exact same problem with encodings-1.0.0. the funny thing is, that the file downloaded just fine, i watched it and then checked /usr/portage/distfiles, and it's there. trying to emerge it again, after it downloaded, produces this output:

Code: Select all

# emerge encodings
Calculating dependencies... done!
>>> Emerging (1 of 1) media-fonts/encodings-1.0.0 to /
>>> Resuming download...
>>> Downloading http://xorg.freedesktop.org/releases/individual/font/encodings-1.0.0.tar.bz2
--13:22:43--  http://xorg.freedesktop.org/releases/individual/font/encodings-1.0.0.tar.bz2
           => `/usr/portage/distfiles/encodings-1.0.0.tar.bz2'
Resolving xorg.freedesktop.org... 131.252.208.36
Connecting to xorg.freedesktop.org|131.252.208.36|:80... connected.
HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable

    The file is already fully retrieved; nothing to do.

!!! Couldn't download encodings-1.0.0.tar.bz2. Aborting.

looky here, portage tells me the file is fully retrieved, and then the next message says it can't be downloaded. crazy... why is this stable, again?

Kaddy · Post by **Kaddy** » Fri Jun 30, 2006 8:27 pm

I know
I'll try and throw something together tonight so that there isn't this HUGE issue with it for every one

on a little different note, I know that there is a failure in finding virtual/x11 after the kbproto
you might have to do it a little unorthodoxly in the sense that you'll have to do something like 'emerge --nodeps x11' and then the other packages.

tane_stelzer · Post by **tane_stelzer** » Fri Jun 30, 2006 8:28 pm

try what kaddy said

Code: Select all

ebuild /usr/portage/x11-proto/kbproto/kbproto-1.0.2.ebuild digest && emerge --resume

of course edit this command and whenever you get an error about md5sum or that download error do this. It worked great for me
Tane

JofCore · Post by **JofCore** » Fri Jun 30, 2006 8:34 pm

Same problem here (just happened to pick today to try to go to modular X -- go figure

).

I'm a little wary about using the ebuild command to rebuild the digest tho.... that kind of defeats the purpose of the digest. Does anyone w/developer ties over @ freedesktop.org know if/when this issue would be fixed? Or is it an issue w/the hashes in portage that have not being updated yet..? Has anyone confirmed that this was a mistake, and not a compromise of the freedesktop.org servers...?

thx!

Norbie Landers · Post by **Norbie Landers** » Fri Jun 30, 2006 8:34 pm

It seems to be fixed in portage now.

slaterson · Post by **slaterson** » Fri Jun 30, 2006 8:39 pm

ok, so remaking the digest fixes not only the md5sum/filesize problems but also the 'Couldn't download' problem. just tried it and it appears to work.

thanks! 31 packages to go...

morphal · Post by **morphal** » Fri Jun 30, 2006 9:02 pm

Yeah, everything seems to be working now and I didn't alter any digests or any of that. I did rm -r /usr/portage but that's just because I'm impatient and easily annoyed. =)

JofCore · Post by **JofCore** » Fri Jun 30, 2006 9:05 pm

Norbie Landers wrote:It seems to be fixed in portage now.

why yes, yes it does

Thanks to whoever fixed it!

(emerging now... package 11 of 99....)

morphal · Post by **morphal** » Fri Jun 30, 2006 9:14 pm

And for those of you that did go around mucking with your ebuild digests, it probably would be a fair idea to clean out all of that and re-sync to make sure everything is on the level.

dantecl · Post by **dantecl** » Fri Jun 30, 2006 11:15 pm

ok guys.... seems that almost every package beneath /usr/portage/x11-proto/ is broken... either it fails MD5 and every subsequent hash or it gives that "couldn't download" message...

no SYNC or portage upgrade fixes this as of now.

Norbie Landers · Post by **Norbie Landers** » Fri Jun 30, 2006 11:22 pm

dantecl wrote:ok guys.... seems that almost every package beneath /usr/portage/x11-proto/ is broken... either it fails MD5 and every subsequent hash or it gives that "couldn't download" message...

no SYNC or portage upgrade fixes this as of now.

That sounds like the same problem, but it really has been fixed in portage. Try SYNCing from a different mirror.

dantecl · Post by **dantecl** » Fri Jun 30, 2006 11:23 pm

what mirrors are known to have this working? I'm in USA

Norbie Landers · Post by **Norbie Landers** » Fri Jun 30, 2006 11:34 pm

rsync://132.229.67.201/gentoo-portage

Edit: That's a european mirror by the way (from rsync.europe.gentoo.org)

dantecl · Post by **dantecl** » Fri Jun 30, 2006 11:49 pm

Norbie Landers wrote:rsync://132.229.67.201/gentoo-portage

Edit: That's a european mirror by the way (from rsync.europe.gentoo.org)

noticed that...

willistg · Post by **willistg** » Sat Jul 01, 2006 1:54 am

tried the euro mirror. Still fuxored.....

>>> Emerging (1 of 112) x11-libs/libX11-1.0.1-r1 to /
>>> checking ebuild checksums
!!! Digest verification failed:
!!! /usr/portage/x11-libs/libX11/libX11-1.0.3.ebuild
!!! Reason: Filesize does not match recorded size
!!! Got: 995
!!! Expected: 1001

I am destined to not have wobbly windows I suppose

willistg · Post by **willistg** » Sat Jul 01, 2006 1:55 am

sorry all the thread merging makes my head spin. I meant to post in another thread.

instance · Post by **instance** » Sat Jul 01, 2006 2:01 am

willistg wrote:tried the euro mirror. Still fuxored.....

>>> Emerging (1 of 112) x11-libs/libX11-1.0.1-r1 to /
>>> checking ebuild checksums
!!! Digest verification failed:
!!! /usr/portage/x11-libs/libX11/libX11-1.0.3.ebuild
!!! Reason: Filesize does not match recorded size
!!! Got: 995
!!! Expected: 1001

I am destined to not have wobbly windows I suppose

I have the same problem... note the discrepancy:

Emerging (1 of 112) x11-libs/libX11-1.0.1-r1

Then:

!!! /usr/portage/x11-libs/libX11/libX11-1.0.3.ebuild

No surprise 1.0.1-r1 doesn't want to play with 1.0.3. Guess we wait for a wile, re-sync and try again. And this is the stable tree? yipes.