XGL (Part 4)

[coutts99]

I've started having a rather odd problem. I run KDE on xgl, but recently some of my kde startup programs have been crashing xgl (ie. the windows all stop responding, but I can still go onto the console and kill everything manually), which means I can't start kde normally through startkde. (ie. I have to launch a console and run kicker and kdesktop manually). I have so far detected amarok and kmix to be causing the problem. I initially looked at artsd, but that's not causing a problem as noatun seems to run fine and plays music with no problem. Any ideas?

edit: It appears I'm getting some "ERROR unlocking pcie memory" stuff in my logs, nothing in the xorg logs. It looks like that only happens when I start xlg though...

I have the exact same problem.

Where are you seeing 'ERROR unlocking pcie memory'?

[piwacet]

Thought I'd have a go at the new compiz-quinstorm #13:

Code: Select all

checking for xgettext... /usr/bin/xgettext
checking whether byte ordering is bigendian... no
checking for x86_64-pc-linux-gnu-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for COMPIZ... configure: error: Package requirements (libpng        xco                                                             mposite                  xfixes                  xdamage                 xrandr                                                                               ice                     sm                  dbus-1          xin                                                             erama            libstartup-notification-1.0 >= 0.7) were not met:

No package 'dbus-1' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables COMPIZ_CFLAGS
and COMPIZ_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


!!! Please attach the following file when filing a report to bugs.gentoo.org:
!!! /var/tmp/portage/compiz-quinnstorm-0.0.13.0/work/compiz-0.0.13/config.log

!!! ERROR: x11-wm/compiz-quinnstorm-0.0.13.0 failed.
Call stack:
  ebuild.sh, line 1539:   Called dyn_compile
  ebuild.sh, line 939:   Called src_compile
  compiz-quinnstorm-0.0.13.0.ebuild, line 51:   Called gnome2_src_compile '--wit                                                             h-gl-libs=-Wl,-R/usr/lib64/opengl/xorg-x11/lib/ -L/usr/lib64/opengl/xorg-x11/lib                                                             / -lGL' '--enable-gnome' '--enable-libsvg-cairo' '--disable-kde'
  gnome2.eclass, line 57:   Called gnome2_src_configure '--with-gl-libs=-Wl,-R/u                                                             sr/lib64/opengl/xorg-x11/lib/ -L/usr/lib64/opengl/xorg-x11/lib/ -lGL' '--enable-                                                             gnome' '--enable-libsvg-cairo' '--disable-kde'
  gnome2.eclass, line 53:   Called econf '--with-gl-libs=-Wl,-R/usr/lib64/opengl                                                             /xorg-x11/lib/ -L/usr/lib64/opengl/xorg-x11/lib/ -lGL' '--enable-gnome' '--enabl                                                             e-libsvg-cairo' '--disable-kde' '--disable-gtk-doc'
  ebuild.sh, line 541:   Called die

!!! econf failed
!!! If you need support, post the topmost build error, and the call stack if rel                                                             evant.

Heh, Oh well, 11.2 was pretty good, I can stick with that for a while.

[nesl247]

piwacet: svn up. I just added the dbus dependency.. It isn't optional as it isn't in ./configure so.

[piwacet]

Thanks, will do.

[BlackBelt]

make all-recursive
make[1]: Entering directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13'
Making all in include
make[2]: Entering directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13/include'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13/include'
Making all in src
make[2]: Entering directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13/src'
make[2]: *** No rule to make target `../debian/changelog', needed by `quinn.h'. Stop.
make[2]: Leaving directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13'
make: *** [all] Error 2

!!! ERROR: x11-wm/compiz-quinnstorm-0.0.13.0-r1 failed.
Call stack:
ebuild.sh, line 1539: Called dyn_compile
ebuild.sh, line 939: Called src_compile
compiz-quinnstorm-0.0.13.0-r1.ebuild, line 52: Called gnome2_src_compile '--with-gl-libs=-Wl,-R/usr/lib64/opengl/xorg-x11/lib/ -L/usr/lib64/opengl/xorg-x11/lib/ -lGL' '--enable-gnome' '--enable-libsvg-cairo' '--disable-kde'
gnome2.eclass, line 58: Called die

!!! compile failure
!!! If you need support, post the topmost build error, and the call stack if relevant.

with compiz-0.0.13-r1

how can I fix it?
thanks

[Xamindar]

I'm getting a block while trying to do a recent upgrade. Does anyone else get this?

Code: Select all

[blocks B     ] >=x11-base/xorg-server-1.0.99 (is blocking media-video/nvidia-glx-1.0.8762)

The thing is, I don't have that version of xorg-server installed, I have bersion 1.1.0.

Just look into the Desktop forum, it's a sticky thread...

thanks for that info, I hadn't noticed. I don't know what the big fuss is though as I have already emerged the latest xorg-server and do not have any problems with my nvidia card working. Whatever I guess. For now I will just work around it.

[Admiral_Trigger_Happy]

I too am getting errors with the latest update.
It is below, any ideas??

Code: Select all

make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/
compiz-0.0.13/include'
Making all in src
make[2]: Entering directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work
/compiz-0.0.13/src'
make[2]: *** No rule to make target `../debian/changelog', needed by `quinn.h'. 
 Stop.
make[2]: Leaving directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/
compiz-0.0.13/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/
compiz-0.0.13'
make: *** [all] Error 2

!!! ERROR: x11-wm/compiz-quinnstorm-0.0.13.0-r1 failed.
Call stack:
  ebuild.sh, line 1539:   Called dyn_compile
  ebuild.sh, line 939:   Called src_compile
  compiz-quinnstorm-0.0.13.0-r1.ebuild, line 52:   Called gnome2_src_compile '--
with-gl-libs=-Wl,-R/usr/lib/opengl/xorg-x11/lib/ -L/usr/lib/opengl/xorg-x11/lib/
 -lGL' '--enable-gnome' '--enable-libsvg-cairo' '--disable-kde'
  gnome2.eclass, line 62:   Called die

!!! compile failure
!!! If you need support, post the topmost build error, and the call stack if rel
evant.


ERROR: emerge... [FAIL]

Please examine the output above for explanation on failed emerge

[BlackBelt]

Can somebody tell me what does

/usr/bin/compiz: Couldn't load plugin 'lib/usr/bin/compiz.so'

mean?

thanks

[ftranschel]

I'm recieving the very same error, Admiral_Trigger_Happy.

[sternklang]

Same build error here as well.

[zombi]

Same build error here as well.

At least, I'm not alone with it

[faugusztin]

Same build error here as well.

At least, I'm not alone with it

I think there is no need to confirm this issue so many times .

[roderick]

I think there is no need to confirm this issue so many times .

I confirm that. Oh wait, was that too many

As for the error, have you tried re-emerge of gtk+, pango? Sometimes these need to be rebuild and are not properly picked up by a revdep-rebuild. Once this is done, try emerge cairo again.

[faugusztin]

I think there is no need to confirm this issue so many times .

I confirm that. Oh wait, was that too many

As for the error, have you tried re-emerge of gtk+, pango? Sometimes these need to be rebuild and are not properly picked up by a revdep-rebuild. Once this is done, try emerge cairo again.

I don't think this bug has anything with gtk or pango.

Code: Select all

make[2]: Entering directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13/src'
make[2]: *** No rule to make target `../debian/changelog', needed by `quinn.h'. Stop. 

Target ../debian/changelog ?

[roderick]

I don't think this bug has anything with gtk or pango.

Code: Select all

make[2]: Entering directory `/var/tmp/portage/compiz-quinnstorm-0.0.13.0-r1/work/compiz-0.0.13/src'
make[2]: *** No rule to make target `../debian/changelog', needed by `quinn.h'. Stop. 

Target ../debian/changelog ?

Oops, I missed that. You're right. Looks like the snapshop is snafu'd. Use an earler one until a new snapshop appears.

[kodi]

Hi guys,

I have a strange problem regarding to alt keys. After pressing the alt key (doesn't matter left or right) im getting the gnome screenshot application. Wheel on my mouse is working ok, but it seems like "windows" key is pressed (windows zooming all the time). Could anyone explain to me what's wrong?

[Jupiter1TX]

well strange rev indeed

i just updated rev 231 and install went great
however decoration problems still there with kxdocker
dock still causes opacity problems with open window

AND compiz crashes when closing a open window


EDIT: removed the dock plugin and compiz no
longer crashes when closing a window

[The_P]

I think compiz-quinnstorm-9999 ebuild should have a dependency on sys-apps/dbus. I got a compile error that some thing with dbus is missing so I added this dependency to the ebuild and now it works. I just thougt I tell you this.

[nesl247]

Hello there. People with the problems with debian/changelog quinn.h bit.. This problem is known, but I guess the way I package the tarball up doesn't include it. I will try and fix it, so just give me a little while.

I added sys-apps/dbus to compiz-quinnstorm-9999 also as I forgot to.. Guess I need to stop staying up so late.

[Admiral_Trigger_Happy]

nesl247 keep up the good work.
No all of us have the skills to keep up with what you do, but we are here to find the bugs and help those who develop, package etc.
We are doing this to make the world a better place too bad the rest of the world will never no.

Thanks

I'm about to try the new changes.

[Zhen85]

Hi all:
I'm trying out Xgl and the compile went great, but unforuntaly i have problems running it.
When i type in

Code: Select all

Xgl :1 -ac -accel glx:pbuffer -accel xv:pbuffer

I get a window with a grey background and the mouse cursor is an "X"
after that, i type in

Code: Select all

LD_LIBRARY_PATH=/usr/lib/opengl/xorg-x11/lib/ DISPLAY=:1 compiz gconf

into another terminal and then the Xgl window turns black with a pointer for the mouse coursor, nothing ever happens
not so sure if this is correct behaviour or not and i don't even know where to type

Code: Select all

gconf-editor

I'm using xorg7.0-rc1 and xorg-server-1.0.2-rc4
i have a radeon x800xl using latest ati drivers (8.25)
xgl overlay is rev 233
plz help, and if more info is needed, just let me know, thanx
Zhen

[Admiral_Trigger_Happy]

Just tried compiz-quinnstorm-9999 and it segfaults because of an issue with dbus.

when I try and run compiz i get the following error

Code: Select all

compiz: Connection Error (Unable to determine the address of the message bus)
compiz: Couldn't initiate D-BUS connection
compiz: Disabling D-BUS Service
Finishing dbus
Segmentation fault

I currently have dbus-0.61-r1 installed and I have rebuilt it and compiz a couple of times but no luck yet.

[nesl247]

Have you /etc/init.d/dbus start and rc-update add dbus default?

[Admiral_Trigger_Happy]

Have you /etc/init.d/dbus start and rc-update add dbus default?

Yes, I just rebooted and it did nothing to fix it either.
I have the following line in the output of ps so I guess dbus is running

Code: Select all

101      14504  0.0  0.1   3776   884 ?        Ss   11:02   0:00 /usr/bin/dbus-daemon --system

[/gwn]

Also I can't find anything in any logs to suggest a problem with dbus, although I do have this line reported by revdep rebuild.

Code: Select all

broken /usr/lib/libIvmConfig.so.0.0.0 (requires libhal.so.0 libdbus-glib-1.so.0 libdbus-1.so.0) 

but I fiqured that one out, I have reemerged dbus and ivman twice now so I have no idea whats doing that.

[nesl247]

Try this: dbus-launch --auto-syntax --exit-with-session

Then try and start compiz.