Attributo SMART Hardware_ECC_Recovered

Message

comio · Post by **comio** » Sat Jun 03, 2006 12:39 am

Ciao a tutti, vorrei porvi all'attenzione i valori smart del mio disco, in particolare il Hardware_ECC_Recovered. Secondo voi devo preoccuparmi? tale attributo aumenta e diminuisce in continuazione... lasciandomi perplesso.
Io inizio a fare i backup in ogni caso...

Code: Select all

SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   252   252   063    Pre-fail  Always       -       1544
  4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       10
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   247   246   187    Pre-fail  Always       -       40244
  9 Power_On_Hours          0x0032   253   253   000    Old_age   Always       -       60
 10 Spin_Retry_Count        0x002b   252   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   252   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   253   253   000    Old_age   Always       -       17
189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always       -       0
190 Unknown_Attribute       0x0022   065   059   000    Old_age   Always       -       656539683
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   038   253   000    Old_age   Always       -       35
[b]195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       700[/b]
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   252   000    Old_age   Always       -       0
202 TA_Increase_Count       0x000a   253   252   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       0
204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   252   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   252   252   000    Old_age   Always       -       0
210 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
211 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
212 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0

grazie a chiunque vorrà darmi un parere.

luigi

fctk · Post by **fctk** » Sat Jun 03, 2006 9:04 am

ti consiglio di chiedere sulla mailing list di smartmontools.