kernel hangs when I enable support for Intel SATA [solved]

[odioworks_com]

Weird problem, kernel hangs at boot when I compile in support (using genkernel) for the intel SATA drivers:

Code: Select all

 Device Drivers  --->  SCSI device support  ---> SCSI low-level drivers  --->  Intel PIIX/ICH SATA support 

However, when I don't have support for the intel drivers, then MD doesn't detect my raid partitions and I still can't boot (Lilo loads, but can't enter root directory)

Here's the output of lspci:

Code: Select all

00:00.0 Host bridge: Intel Corporation E7220/E7221 Memory Controller Hub (rev 04) 
00:01.0 PCI bridge: Intel Corporation E7220/E7221 PCI Express Root Port (rev 04) 
00:02.0 VGA compatible controller: Intel Corporation E7221 Integrated Graphics Controller (rev 04) 
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) 
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) 
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) 
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 
00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03) 
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) 
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 
04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 
04:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

[odioworks_com]

solved:

apparently after re-compiling your kernel through genkernel you have to run the following line or else gnetoo won't boot:

/sbin/lilo -F