xorg-x11 6.9.0 with compose cache ebuild [OBSOLETE]

Message

roderick · Post by **roderick** » Fri Jan 13, 2006 2:35 pm

CoronaLover wrote:or just cd ${WORKDIR}/xc/programs/Xserver/hw/xfree86/drivers/i810/
before the epatch

Oh.

Never thought about that.

I'll give that a try.

npc · Post by **npc** » Fri Jan 20, 2006 9:55 pm

Hey guys. Could somebody point me out a howto on setting up the tvout functionality of a i810 compatible card with this version of Xorg? I have a i900gml intel card, read the man pages, tried so many kinds of setup but still all i get from my tv i a little flicker when i hit fn+CRT/LCD.

Thank you. Keep up the good work.

PS.: Is the project ever going to be updated again since the modular Xorg 7 is out already?

nxsty · Post by **nxsty** » Sun Jan 22, 2006 7:03 pm

npc wrote:Hey guys. Could somebody point me out a howto on setting up the tvout functionality of a i810 compatible card with this version of Xorg? I have a i900gml intel card, read the man pages, tried so many kinds of setup but still all i get from my tv i a little flicker when i hit fn+CRT/LCD.

Thank you. Keep up the good work.

PS.: Is the project ever going to be updated again since the modular Xorg 7 is out already?

I don't know, I've never used TV-out in linux. But I guess it shouldn't be to hard if it's supported. Google turns up quite a few results on a search.

I'll probably at least port the compose cache patch to 7.0 when I migrate myself. But 6.9 is running nicely so I don't have any plans to do that currently. The other changes are not that exciting.

Anyway I updated the overlay. Not much is new except for a updated compose cache patch from suse 10.1 beta1 and a repacked patch tarball.

dmvianna · Post by **dmvianna** » Sun Jan 22, 2006 8:31 pm

linux4ever wrote:The savage dri-drivers (kernel 2.6.14, x11-drm or binary snapshots) don't work yet.
(the x11-drm drivers don't even load, (unresolved symbol pci_pretty_name or somethin like that)), but the result (without dri) is the same! So it should come from X itself)

Can you do something to work with this X version if you have a savage chipset? Can anybody help? The 'stable' X don't support savage-dri...

I had xorg-x11 6.9 (from the overlay in the first post) with a working savage drm until I compiled a new kernel yesterday. I was using the 20050411 savage snapshot from dri.freedesktop.org. Then I tried today's snapshot, to no avail (look at my post here: http://forums.gentoo.org/viewtopic-t-14 ... t-225.html). So it seems that the old snapshots worked with 6.9, but the new snapshots don't. I will try to downgrade my module with an older snapshot, let's see if it will work again.

[EDIT] 20050411 will not compile.

[EDIT] 20051220 produces an error when modprobing (dmesg: savage: Unknown symbol drm_addmap)
[EDIT] 20050718 produces: savage: Unknown symbol pci_pretty_name; Unknown symbol drm_addmap

[EDIT] Kernel that worked: 2.6.13-gentoo-r3; kernel that didn't: 2.6.14-suspend2-r7

ViRgiLiO · Post by **ViRgiLiO** » Mon Jan 23, 2006 9:14 pm

I see in your repository a patch for qt-3.3.5. I'm curious. Could you explain us what are the improvements in this patch? And, how can we use it? Could you create a new qt overlay ebuild (it would be really great)? Thanks in advance.

nxsty · Post by **nxsty** » Tue Jan 24, 2006 11:27 am

ViRgiLiO wrote:I see in your repository a patch for qt-3.3.5. I'm curious. Could you explain us what are the improvements in this patch? And, how can we use it? Could you create a new qt overlay ebuild (it would be really great)? Thanks in advance.

It's a snapshot of qt-copy from KDE SVN. It's a qt enhanced with various fixed and optimizations by the KDE devs, usually meant to be sent upstream. Qt needs to be patched anyway to allow KDE to be compiled with symbol visibilty enabled so I thought why not tweak this thing too.

I'll announce it here soon along with some other KDE performance tips.

ViRgiLiO · Post by **ViRgiLiO** » Wed Jan 25, 2006 6:38 am

This could be another overlay serie from nxsty

.

ViRgiLiO · Post by **ViRgiLiO** » Wed Jan 25, 2006 8:50 pm

You did it. Your are great, man.

Xake · Post by **Xake** » Sun Jan 29, 2006 10:31 am

Anyone using Gnome and have had problems with gconfd failing to start when using mousedriver evdev?

infirit · Post by **infirit** » Sun Jan 29, 2006 12:30 pm

Xake wrote:Anyone using Gnome and have had problems with gconfd failing to start when using mousedriver evdev?

Yes, see bug 116195, it has a patch to fix it.

cholzsc1 · Post by **cholzsc1** » Sun Jan 29, 2006 3:21 pm

I put =x11-base/xorg-x11-6.9* -* to your /etc/portage/package.keywords and when i tyoe emerge -pv xorg-x11
I get only version x11-base/xorg-x11-6.8.2-r6.

I put untarred files in /usr/local/portage/xorg-x11 am i missing something?

dmvianna · Post by **dmvianna** » Sun Jan 29, 2006 3:35 pm

cholzsc1 wrote:I put =x11-base/xorg-x11-6.9* -* to your /etc/portage/package.keywords and when i tyoe emerge -pv xorg-x11
I get only version x11-base/xorg-x11-6.8.2-r6.

Did you include "~x86" or your architecture, like

Code: Select all

=x11-base/xorg-x11-6.9* -* ~x86

in your package.keywords?

cholzsc1 · Post by **cholzsc1** » Sun Jan 29, 2006 3:40 pm

Nah i got it a mess up on my behave lol and it was amd64 no worries ty

gnomen · Post by **gnomen** » Mon Jan 30, 2006 7:27 pm

cholzsc1 wrote:I put untarred files in /usr/local/portage/xorg-x11 am i missing something?

Yes, you are missing something

Put the files in /usr/local/portage/x11-base

RoundsToZero · Post by **RoundsToZero** » Thu Feb 02, 2006 2:19 pm

I just installed the 6.9.0 ebuild and am having some strange behavior. I am using the radeon open source driver even though I have a Radeon 9600. I'm using MergedFB if that matters. When I have the AccelMethod set to EXA, dragging is unusably slow. Using the default XAA is fine.

Where it gets interesting is that as long as I'm using the Composite extension, EXA is fine. I can have translucent windows with shadows that I can drag around faster than when I'm not using Composite, even though I'm using EXA in both cases. Of course, Composite with XAA is still slow, but I think that's expected.

It's not like I need to be using EXA, but it is the direction things are moving in so I thought I'd ask this question.

marciojc · Post by **marciojc** » Fri Feb 10, 2006 11:13 am

And how about Novell XGL extension?

http://www.novell.com/linux/xglrelease/

ktech · Post by **ktech** » Fri Feb 10, 2006 5:20 pm

Following the gentoo howto about xgl, it seems we need to migrate to modular X, so... How's that effort to migrate compose patches to modular? Hasn't Suse done that?

Psycho Dad · Post by **Psycho Dad** » Sun Feb 12, 2006 2:59 pm

Hello,

Installed the new ebuild from 9th february yesterday with the benh-radeon-fixes patches enabled.
First it did not compile with this error:

Code: Select all

radeon_cursor.c:35: Fehler: Fehler beim Parsen vor »/«-Zeichen
radeon_cursor.c:35: Fehler: Syntaxfehler beim Token »#«
make[7]: *** [radeon_cursor.o] Fehler 1
make[7]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver/hw/xfree86/drivers/ati'
make[6]: *** [all] Fehler 2
make[6]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver/hw/xfree86/drivers'
make[5]: *** [all] Fehler 2
make[5]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver/hw/xfree86'
make[4]: *** [hw/xfree86] Fehler 2
make[4]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver'
make[3]: *** [all] Fehler 2
make[3]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs'
make[2]: *** [all] Fehler 2
make[2]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc'
make[1]: *** [World] Fehler 2
make[1]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc'
make: *** [World] Fehler 2

!!! ERROR: x11-base/xorg-x11-6.9.0-r1 failed.
!!! Function build, Line 939, Exitcode 2
!!! make World failed

After changing line 35 in the mentioned file from

//#define RADEONCTRACE(x) RADEONTRACE(x)

to

/* #define RADEONCTRACE(x) RADEONTRACE(x) */

and commenting it out this way it compiled fine. Dont know if it comes from the patch.
There are no differences to the situation without the two patches, same performance, no failures in the picture on every 3D-application I tested (ppracer, Q3...).
But there is an issue with glxgears: Some parts of the desktop "tremble" while running this benchmark.
The shown FPS is the same like before.
If you or Ben is interested in some tests, logfiles, etc just ask.

Some details to my system that might be important:

Amilo A 7600 with Radeon IGP 320M
Kernel 2.6.15-gentoo-r5
KDE 3.5.1

Greets

Thomas

PS: Can it be that some parts of this thread disappeared, especially the part where you anounced the ebuild from 9th of
february?

nxsty · Post by **nxsty** » Sun Feb 12, 2006 4:00 pm

Psycho Dad wrote:Hello,

Installed the new ebuild from 9th february yesterday with the benh-radeon-fixes patches enabled.
First it did not compile with this error:

I updated the patchset and link in the first post to the latest radeon patches. See if it works better for you. Otherwise I'm sure benh would like to hear about it!

Iluminatus · Post by **Iluminatus** » Sun Feb 12, 2006 4:16 pm

It' a known issue, already disscussed in dri devel mailing list. Just edit the patch and in patch file radeon cursor change '//' C++ style comment to /**/ c comment type.

I didn't knew that this ebuild has the patch, but i added to my tar patchset and it appears to work great here. Just a little of copy paste in th patch file and you are ready to go. If you notest in your Xorg.log you'll see that some memory allocations are relocated....

The speed is the same, but i'll try to do a little hackish and see if now i can enable VideoRam to support 256MB, it doesn't appear to be difficult...

Psycho Dad · Post by **Psycho Dad** » Sun Feb 12, 2006 10:08 pm

Compiled the overlay from today, absolutely no differences to the one from 3 days ago (the compile error still has to be fixed manually too).
Of course, some things in Xorg.0.log changed with Benhs Radeon fix.

Without patch:

Code: Select all

(II) RADEON(0): [drm] loaded kernel module for "radeon" driver
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:05.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xddd1c000
(II) RADEON(0): [drm] mapped SAREA 0xddd1c000 to 0xb7920000
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x0f000217 [AGP 0x1002/0xcab0; Card 0x1002/0x4336]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xec000000
(II) RADEON(0): [agp] Ring mapped at 0xb36e9000
(II) RADEON(0): [agp] ring read ptr handle = 0xec101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f79000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xec102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb34e9000
(II) RADEON(0): [agp] GART texture map handle = 0xec302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb3009000
(II) RADEON(0): [drm] register handle = 0xe8500000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): BIOS HotKeys Enabled
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Will use back buffer at offset 0x600000
(II) RADEON(0): Will use depth buffer at offset 0x780000
(II) RADEON(0): Will use 56320 kb for textures at offset 0x900000
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7413
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Option "Rotate" is not used
(WW) RADEON(0): Option "CalcAlgorithm" is not used
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 3
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION  was: 0x1fff1c00 is: 0x1fff1c00
(WW) RADEON(0): MC_AGP_LOCATION was: 0x203f2000 is: 0x207f2000
(II) RADEON(0): Direct rendering enabled

With patch:

Code: Select all

(II) RADEON(0): [drm] loaded kernel module for "radeon" driver
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:05.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xddc86000
(II) RADEON(0): [drm] mapped SAREA 0xddc86000 to 0xb78d3000
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x0f000217 [AGP 0x1002/0xcab0; Card 0x1002/0x4336]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xec000000
(II) RADEON(0): [agp] Ring mapped at 0xb369c000
(II) RADEON(0): [agp] ring read ptr handle = 0xec101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f2c000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xec102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb349c000
(II) RADEON(0): [agp] GART texture map handle = 0xec302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb2fbc000
(II) RADEON(0): [drm] register handle = 0xe8500000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): BIOS HotKeys Enabled
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Will use back buffer at offset 0x600000
(II) RADEON(0): Will use depth buffer at offset 0x780000
(II) RADEON(0): Will use 56320 kb for textures at offset 0x900000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): [drm] failed to enable new memory map
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 3
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x1fff1c00 is: 0x1fff1c00
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0x207f2000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7413
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Option "Rotate" is not used
(WW) RADEON(0): Option "CalcAlgorithm" is not used

If it is important: I use the dri-snapshot from 6th february for compiling the kernel modules (drm.ko and radeon.ko), as it gives a huge performance boost together with enabling Hyperz-Support via driconf.

zietbukuel · Post by **zietbukuel** » Mon Feb 13, 2006 7:23 am

I have this error when compiling:

Code: Select all

x86_64-pc-linux-gnu-gcc -mtune=athlon64 -O2 -pipe -fomit-frame-pointer -fno-strict-aliasing -ansi -Wno-return-type -w  -fPIC  -I. -I../i2c -I../../../../../../programs/Xserver/hw/xfree86/common -I../../../../../../programs/Xserver/hw/xfree86/os-support -I../../../../../../programs/Xserver/hw/xfree86            -I../../../../../../programs/Xserver/hw/xfree86/vbe -I../../../../../../programs/Xserver/hw/xfree86/int10    -I../../../../../../programs/Xserver/hw/xfree86/ddc -I../../../../../../programs/Xserver/hw/xfree86/i2c            -I../../../../../../programs/Xserver/hw/xfree86/rac -I../../../../../../programs/Xserver/hw/xfree86/ramdac            -I../../../../../../programs/Xserver/hw/xfree86/shadowfb -I../../../../../../programs/Xserver/hw/xfree86/xaa -I../../../../../../programs/Xserver/hw/xfree86/exa            -I../../../../../../programs/Xserver/hw/xfree86/xf4bpp -I../../../../../../programs/Xserver/hw/xfree86/xf1bpp            -I../../../../../../programs/Xserver/hw/xfree86/vgahw -I../../../../../../programs/Xserver/hw/xfree86/fbdevhw            -I../../../../../../programs/Xserver/mfb -I../../../../../../programs/Xserver/fb -I../../../../../../programs/Xserver/mi            -I../../../../../../programs/Xserver/miext/shadow            -I../../../../../../programs/Xserver/render -I../../../../../../programs/Xserver/Xext -I../../../../../../programs/Xserver/include            -I../../../../../../programs/Xserver/GL/dri -I../../../../../../lib/GL/dri -I../../../../../../include               -I../../../../../../extras/drm/shared-core -I../../../../../../include/fonts -I../../../../../../include/extensions -I../../../../../../exports/include/X11  -I../../../../../.. -I../../../../../../exports/include   -Dlinux -D__amd64__ -D_POSIX_C_SOURCE=199309L                            -D_POSIX_SOURCE -D_XOPEN_SOURCE                               -D_BSD_SOURCE -D_SVID_SOURCE                                 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE                            -DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP       -DXCSECURITY -DTOGCUP   -DXF86BIGFONT -DDPMSExtension -DPANORAMIX      -DRENDER -DRANDR       -DXFIXES -DDAMAGE -DCOMPOSITE -DXEVIE    -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH       -DXFreeXDGA -DXvExtension                                -DXFree86LOADER -DDLOPEN_HACK -DXFree86Server                           -DXF86VIDMODE-DXvMCExtension                          -DSMART_SCHEDULE                                 -DXResExtension                                -DX_BYTE_ORDER=X_LITTLE_ENDIAN                                -DXORG_VERSION_CURRENT="(((6) * 10000000) + ((9) * 100000) + ((0) * 1000) + 0)" -D_XSERVER64 -DNDEBUG   -DFUNCPROTO=15 -DNARROWPROTO  -DIN_MODULE -DXFree86Module    -DGLXEXT -DXF86DRI -DGLX_DIRECT_RENDERING -DGLX_USE_DLOPEN -DGLX_USE_MESA -D__GLX_ALIGN64         -DWITH_VGAHW -DUSE_EXA -DUSE_XAA   -c radeon_cursor.c
radeon_cursor.c:35: error: syntax error before '/' token
radeon_cursor.c:35: error: syntax error at '#' token
make[7]: *** [radeon_cursor.o] Error 1
make[7]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver/hw/xfree86/drivers/ati'
make[6]: *** [all] Error 2
make[6]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver/hw/xfree86/drivers'
make[5]: *** [all] Error 2
make[5]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver/hw/xfree86'
make[4]: *** [hw/xfree86] Error 2
make[4]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs/Xserver'
make[3]: *** [all] Error 2
make[3]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc/programs'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc'
make[1]: *** [World] Error 2
make[1]: Leaving directory `/var/tmp/portage/xorg-x11-6.9.0-r1/work/xc'
make: *** [World] Error 2

!!! ERROR: x11-base/xorg-x11-6.9.0-r1 failed.
Call stack:
  ebuild.sh, line 1894:   Called dyn_compile
  ebuild.sh, line 941:   Called src_compile
  xorg-x11-6.9.0-r1.ebuild, line 162:   Called build

!!! make World failed
!!! If you need support, post the topmost build error, and the call stack if relevant.

Iluminatus · Post by **Iluminatus** » Mon Feb 13, 2006 7:56 am

New snapshot, try it again....

but if still fail, just edit the patch 8020 bens memory patch, search for radeon_cursor.c, and edit the comment //#define.....
to /*#define....*/

Save patch. Update tarball, delete digest, ebuild digest with new patch, emerge...

zietbukuel · Post by **zietbukuel** » Mon Feb 13, 2006 2:58 pm

Thank you, it worked! but now i want to activate Direct Rendering and but can't

UPDATE: Nervermind, got it working

Psycho Dad · Post by **Psycho Dad** » Tue Feb 14, 2006 12:16 am

Do you have this flickering with glxgears too if you have a radeon?

xorg-x11 6.9.0 with compose cache ebuild [OBSOLETE]

Findings: Qt patch

Re: Findings: Qt patch

:)