XMMS2 ebuilds

Message

jxn · Post by **jxn** » Sun Jul 03, 2005 2:38 pm

plbe wrote:hrm so did this ebuild work ok for anyone else?

...haven't tried it because I've been successfully using the ycarus ebuilds for the last month and a half... there's one for xmms2 from snapshot and a new one for xmms2 from git (which I haven't tried yet)... you could give those a shot if you haven't had any success with this ebuild...

plbe · Post by **plbe** » Sun Jul 03, 2005 2:59 pm

jxn wrote:
plbe wrote:hrm so did this ebuild work ok for anyone else?
...haven't tried it because I've been successfully using the ycarus ebuilds for the last month and a half... there's one for xmms2 from snapshot and a new one for xmms2 from git (which I haven't tried yet)... you could give those a shot if you haven't had any success with this ebuild...

I have xmms2 installed already was just curious at the success rate of these ebuilds......would be nice if they would make there way into portage so I could keep everything up to date ala gentoo way......hrm this git ebuild is quite interesting, I'll give it a try.

Ycarus · Post by **Ycarus** » Sun Jul 03, 2005 6:45 pm

The git ebuild use a eclass I made for git and should work...
You are free to send me a mail if you have any problems

plbe · Post by **plbe** » Sun Jul 03, 2005 6:53 pm

Ycarus wrote:The git ebuild use a eclass I made for git and should work...
You are free to send me a mail if you have any problems

You should submit it to bugs.gentoo.org so we can get it into portage....nice work btw

Ycarus · Post by **Ycarus** » Sun Jul 03, 2005 7:01 pm

I want to test it and to make it better before

drakos7 · Post by **drakos7** » Mon Jul 04, 2005 1:16 am

works for me!

plbe · Post by **plbe** » Mon Jul 04, 2005 12:42 pm

drakos7 wrote:works for me!

indeed it does

plbe · Post by **plbe** » Mon Jul 04, 2005 1:49 pm

Ycarus wrote:I want to test it and to make it better before

xmms2 dev checked out your ebuild and wanted me to pass this along to you(straight from irc conversation)..........

09:43 | tru : I should write packaging guidelines.
09:43 | tru : that does some things I feel scared about

09:43 | sacarasc : lol
09:43 || plb : lol
09:44 || plb : such as?
09:44 | tru : he runs scons and then scons with diffrent flags.
09:44 | tru : why?
09:44 | tru : and then he doesn't use scons install command.
09:44 | tru : and neglects to install the samplefile.
09:45 | tru : which I don't like since it will be refered by the first
playlist.
09:45 || plb : tell me what to say and I'll pass it along to him in the
forums ;]
09:46 | tru : just copy the above.
09:46 || plb : ok
09:47 | tru : if he has any problems with scons install, please contact us.
we could sort it out.

Ycarus · Post by **Ycarus** » Mon Jul 04, 2005 3:57 pm

Ok, I think the ebuild is better now

This part come from my first ebuild, and I had some problem with scons... Now all seems to work fine

plbe · Post by **plbe** » Mon Jul 04, 2005 6:29 pm

Ycarus wrote:Ok, I think the ebuild is better now
This part come from my first ebuild, and I had some problem with scons... Now all seems to work fine

ok, I'll ask him to check out your new ebuild....erm or perhaps you should just join #xmms2 on freenode

plbe · Post by **plbe** » Mon Jul 04, 2005 7:52 pm

Ycarus wrote:Ok, I think the ebuild is better now
This part come from my first ebuild, and I had some problem with scons... Now all seems to work fine

yep he said much better now

Pithlit · Post by **Pithlit** » Mon Jul 04, 2005 10:31 pm

I have a little problem here (and I believe it's something not directly related to xmms2)... maybe someone could help me out:

Code: Select all

xmms2 add /home/media/128/Animatrix/The\ Animatrix\ -\ 01\ -\ Peace\ Orchestra\ -\ Who\ Am\ I\ \(Animatrix\ Edit\).mp3 
something went wrong when adding it to the playlist

And here's what xmms2d has to say about it:

xmms2d wrote:2005-07-05 00:28 DEBUG: src/xmms/ipc.c:541: Client connect?!
2005-07-05 00:28 DEBUG: src/xmms/main.c:231: Client XMMS2 CLI with protocol version 1 sent hello!
2005-07-05 00:28 Error in query! (1) - no such table: Media
2005-07-05 00:28 Error in query! (1) - no such table: Media
2005-07-05 00:28 DEBUG: src/xmms/ipc.c:426: disconnect was true!
2005-07-05 00:28 DEBUG: src/xmms/ipc.c:463: Destroying client!

I do believe I'm missing something...

*edit* other than that - every ebuild posted here seems to work fine.

Cinder6 · Post by **Cinder6** » Tue Jul 05, 2005 1:23 am

Pithlit wrote:
xmms2d wrote:2005-07-05 00:28 DEBUG: src/xmms/ipc.c:541: Client connect?!
2005-07-05 00:28 DEBUG: src/xmms/main.c:231: Client XMMS2 CLI with protocol version 1 sent hello!
2005-07-05 00:28 Error in query! (1) - no such table: Media
2005-07-05 00:28 Error in query! (1) - no such table: Media
2005-07-05 00:28 DEBUG: src/xmms/ipc.c:426: disconnect was true!
2005-07-05 00:28 DEBUG: src/xmms/ipc.c:463: Destroying client!
I do believe I'm missing something...

Well, at least it sounds happy about its problems and about destroying itself

plbe · Post by **plbe** » Tue Jul 05, 2005 2:06 am

if you guys are having problems with xmms2 itself you should ask one of the devs in #xmms2 on freenode, they are quite helpful.

plbe · Post by **plbe** » Thu Jul 07, 2005 11:24 am

Ycarus wrote:Ok, I think the ebuild is better now
This part come from my first ebuild, and I had some problem with scons... Now all seems to work fine

hrm I think its about time you submit this ebuild to b.g.o, seems to work nicely

MetalGod · Post by **MetalGod** » Tue Oct 25, 2005 2:40 am

submit one for the current xmms2-0.1DR2.2 then i will review. I'm working on an ebuild too.

trevorj · Post by **trevorj** » Sun Nov 06, 2005 1:42 am

Can someone post ycarus's git.eclass? His site states he had a disk crash, and I get 404s when trying to download them.

Thanks

96140 · Post by **96140** » Sun Nov 06, 2005 5:55 am

mirko_3 wrote:Just because it works for you, it doesn't mean that it wont blow up my computer, kill me, start a fire, burn the nearby power station and exterminate the rest of humanity...

Heck, that happens from time to time even with stable packages.

DarkWeaver · Post by **DarkWeaver** » Mon Nov 21, 2005 1:01 pm

Hi there!

I think I'm posting this in the right place. I'm having a bit of a problem with xmms2 and ycarus' (git version) ebuild. OK, so the build works just fine, and xmms2 will work OK after installation. The stumbling point comes when I try and use the rc script supplied.

I've looked around, the problem is the fact that xmms2d does not accept the -d option anymore, they've added a program called xmms2-launcher to daemonise xmms2. So, I think to myself, not too difficult, just edit the script. So I did that, changed xmms2d to xmms2-launcher and removed the -d option.
And I had some success. But, it seems I don't quite know what start-stop-daemon does; it seems to close the program it just started: xmms2 starts, then promptly stops.

Can anyone give me an alternative command to use? xmms2-launcher still has to be run as the user I believe, and that's the bit that I can't figure out. Doing something silly like su'ing to my user will of course stop the boot sequence (yep, I tried it!).

Cheers for any help, DarkWeaver.

Schmokin · Post by **Schmokin** » Tue Nov 22, 2005 12:55 am

Updated gxmms2-Makefile-gentoo for Ycarus gxmms2-git ebuild

Code: Select all

# Makefile for gxmms2

#Installation directory
INSTALLPATH=/usr/bin

# Path to XMMS2 header files
XMMS2_INCLUDE_DIR=/usr/include/xmms2

ALLFILES=*.c *.h *.xpm Makefile README COPYING

GTK_INCLUDE = `pkg-config gtk+-2.0 --cflags`
GTK_LIB = `pkg-config gtk+-2.0 --libs`

FLAGS = -O2 -Wall -fPIC $(GTK_INCLUDE) -I${XMMS2_INCLUDE_DIR}
LIBS = $(GTK_LIB) -lxmmsclient -lxmmsclient-glib

LFLAGS =

CC = gcc $(CFLAGS) $(FLAGS)

OBJS = gxmms2src/gxmms2.o gxmms2src/statusdisplay.o gxmms2src/wejpconfig.o gxmms2src/wejpscroller.o xmms2ctrl/xmms2ctrl.o gtrackinfo/trackinfo.o gtrackinfo/gtrackinfo.o gmedialib/gmlplaylist.o gmedialib/gmladdfiles.o gmedialib/gmedialib.o gmedialib/gmlbrowser.o gmedialib/gmlsearch.o gmedialib/gmlplaylists.o sdecode/sdecode.o

projname := gxmms2-$(shell awk '/define VERSION_NUMBER/ { print $$3 }' gxmms2src/gxmms2.c )

gxmms2: $(OBJS)
	$(CC) $(OBJS) -o gxmms2 $(LFLAGS) $(LIBS)

dist: $(ALLFILES)
	-rm -rf $(projname)
	mkdir $(projname)
	cp -rl --parents $(ALLFILES) $(projname)
	tar chfz $(projname).tar.gz $(projname)
	-rm -rf $(projname)

clean:
	rm -f *.o core *.so* *.bak *~

gxmms2.o: gxmms2.c
trackinfo.o: trackinfo.c
xmms2ctrl.o: xmms2ctrl.c
gtrackinfo.o: gtrackinfo.c
gmedialib.o: gmedialib.c
gmlplaylist.o: gmlplaylist.c
gmlbrowser.o: gmlbrowser.c
gmlsearch.o: gmlsearch.c

install:
	install -D gxmms2 $(INSTALLPATH)/gxmms2

uninstall:
	-rm $(INSTALLPATH)/gxmms2

The latest git versions include subdirs for the different files is all. Oh yeah, I'm sure there was a better way to do that, I'm just not up to speed on the whole Makefile bit, made it work for me though.