KDE CVS/Subversion Split Ebuilds (Replies Part 1)

Message

ktech · Post by **ktech** » Wed Oct 12, 2005 1:47 pm

I seems there is a problem with kmobile ebuild:

[...]
config.status: creating config.h
config.status: executing depfiles commands

Good - your configure finished. Start make now

/usr/local/portage-bmg/eclass/kde-meta.eclass: line 494: pushd: /var/tmp/portage/kmobile-7/work/branches/KDE/3.5/kdepim/doc/kmobile: No existe el fichero o el directorio

!!! ERROR: kde-base/kmobile-7 failed.
!!! Function kde-meta_src_compile, Line 494, Exitcode 1
!!! kde-meta_src_compile: unable to change directory to {S}/doc/kmobile
!!! If you need support, post the topmost build error, NOT this status message.

Bonkie · Post by **Bonkie** » Wed Oct 12, 2005 2:28 pm

sync and try again.

ps: you can post bugs here rather then in this thread.

Merlin-TC · Post by **Merlin-TC** » Wed Oct 12, 2005 4:05 pm

Bonkie wrote:sync and try again.

ps: you can post bugs here rather then in this thread.

Actually ktech knows that doesn't he?

*wink*

@Bonkie: I found this app to have a voice converstaion and it seems to be really nice. Uses the open speex codec and can also be encrypted, supports alsa too.

I am trying to force some friends to compile it now

http://ihu.sourceforge.net/

Maybe we can add it to kde-live?
Would be nice

ktech · Post by **ktech** » Wed Oct 12, 2005 4:16 pm

Yeah, it's only that I forgot that...

I have just filled a new bugreport about kmobile.

Thanks a lot!!

cracki · Post by **cracki** » Wed Oct 12, 2005 7:05 pm

Dont know if this is a bug, or does this only happen to me?

stable

>>> Source unpacked.
/usr/lib/portage/bin/ebuild.sh: line 7953: portageq: readonly function
/usr/lib/portage/bin/ebuild.sh: line 8518: speak: readonly function
>>> Compiling source ...
*** YOU'RE USING UNSERMAKE.
*** GOOD LUCK!!

*** Creating acinclude.m4
*** Creating aclocal.m4
aclocal: `configure.ac' or `configure.in' is required
make: *** [cvs] Error 1

!!! ERROR: kde-base/arts-7-r1 failed.
!!! Function kde_src_compile, Line 7182, Exitcode 1
!!! no configure script found, generation unsuccessful

Bonkie · Post by **Bonkie** » Wed Oct 12, 2005 7:13 pm

Does that happen only for arts ??

Merlin-TC · Post by **Merlin-TC** » Wed Oct 12, 2005 8:31 pm

For me arts fails too but I guess we can wait until tomorrow if it gets fixed, maybe it's just a problem in svn right now.

mario · Post by **mario** » Thu Oct 13, 2005 3:37 pm

It was related to my qt-4 installation, it works when I unmerge qt-4.0.0

mario wrote:I can't compile dbus with qt-7, not sure why.

mario · Post by **mario** » Thu Oct 13, 2005 6:28 pm

It seems they have unmasked hal-0.5 and now kde's media:// protocol doesn't work. Also /etc/hal/device.d is now missing after the ebuild asked me to remove it before emerging and the tips for pmount can no longer apply.

Anyone give an advice on how to fix this?

alinv · Post by **alinv** » Thu Oct 13, 2005 6:46 pm

mario wrote:It seems they have unmasked hal-0.5 and now kde's media:// protocol doesn't work. Also /etc/hal/device.d is now missing after the ebuild asked me to remove it before emerging and the tips for pmount can no longer apply.

Anyone give an advice on how to fix this?

I have hal-0.5.4 and media:/ works fine after recompiling kdelibs and kioslaves.

mario · Post by **mario** » Thu Oct 13, 2005 7:16 pm

alinv wrote:
I have hal-0.5.4 and media:/ works fine after recompiling kdelibs and kioslaves.

Thanks, kioslaves recompile sufficed. Hope all is well in Romania with the bird flu...

alinv · Post by **alinv** » Thu Oct 13, 2005 7:58 pm

mario wrote:Hope all is well in Romania with the bird flu...

OT> Looks like a media bubble to me. No confirmed case so far, but they are acting like half of us are already gone

chetan13 · Post by **chetan13** » Fri Oct 14, 2005 2:34 am

Can we use kdeenablefinal now? is there any (dis)advantage?

Also, is kanagram in the repository now?(i am not able to sync)

Bonkie · Post by **Bonkie** » Fri Oct 14, 2005 3:47 pm

mario wrote:
alinv wrote:
I have hal-0.5.4 and media:/ works fine after recompiling kdelibs and kioslaves.
Thanks, kioslaves recompile sufficed.

U might wanna recompile k3b as well, it also depends on dbus/hal libraries. I usually run revdep-rebuild after a library update

Merlin-TC · Post by **Merlin-TC** » Fri Oct 14, 2005 3:56 pm

Is anyone here using Kaffeine with the gstreamer backend?
I am trying to get it work but I can't use alsasink as output, only oss which I don't want to use.

tgurr · Post by **tgurr** » Fri Oct 14, 2005 5:21 pm

Crashed for me the last time I tried to use the gstreamer backend with it. I guess it's not supported very well yet and in an really early stage.

superstoned · Post by **superstoned** » Mon Oct 17, 2005 10:07 am

is there someting wrong with the repository? several packages (kdelibs for example) seem to be missing...

Merlin-TC · Post by **Merlin-TC** » Mon Oct 17, 2005 10:14 am

I think lots of stuff is missing, was deleted when I did a gensync just now.
I guess we just have to wait

Bonkie · Post by **Bonkie** » Mon Oct 17, 2005 11:49 am

should be fixed now, my bad

superstoned · Post by **superstoned** » Mon Oct 17, 2005 12:07 pm

thanx for fixin'

saturas · Post by **saturas** » Mon Oct 17, 2005 3:19 pm

hi i've done the gensync kde-live thing and everything worked fine. the problem is that when i try to emerge --update world (to get the svn version of kde), it tryes to make download to 5.2 version of kde programs insted of the svn

saturas · Post by **saturas** » Mon Oct 17, 2005 4:41 pm

problem solved 10x to alinv

i had to change the path in make.conf

from

PORTDIR_OVERLAY="/usr/local/portage"
to
PORTDIR_OVERLAY="/usr/local/portage /usr/local/portage/kde-live"

convoi · Post by **convoi** » Wed Oct 19, 2005 6:43 am

when will genKDEsvn switch to kde 4? with kde3.5 beta2 being out, there's less and less reason for me to use the svn tree, when there's no possibility to circumvent the fix on branch/3.5

i found hints in the eclasses that you might already be preparing for a switch (ebuildname-8.0.ebuild e.g. would be using branches/KDE/4.0, ebuildname-8.1.ebuild should use /trunk/KDE)...

Bonkie · Post by **Bonkie** » Wed Oct 19, 2005 8:58 am

convoi wrote:when will genKDEsvn switch to kde 4? with kde3.5 beta2 being out, there's less and less reason for me to use the svn tree, when there's no possibility to circumvent the fix on branch/3.5

i found hints in the eclasses that you might already be preparing for a switch (ebuildname-8.0.ebuild e.g. would be using branches/KDE/4.0, ebuildname-8.1.ebuild should use /trunk/KDE)...

When kde3.5 IS released, and yes we are preparing for kde4 although nothing's concrete yet.

Bonkie · Post by **Bonkie** » Sun Nov 13, 2005 3:02 pm

the crashes related to invisibility in gcc-4.0.2 seem to be related to broken libstdc++, so try upgrading to gcc-4.1 ... (or downgrading)

http://bugs.kde.org/show_bug.cgi?id=111115

I've upgraded to gcc-4.1_beta and the crashes seem to have disappeared.

KDE CVS/Subversion Split Ebuilds (Replies Part 1)

HAL + pmount

Re: HAL + pmount

Re: HAL + pmount

Re: HAL + pmount

Re: HAL + pmount