slapd.conf
Code: Select all
# $OpenLDAP: pkg/ldap/servers/slapd/slapd.conf,v 1.23.2.8 2003/05/24 23:19:14 kurt Exp $
#
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/samba.schema
include /etc/openldap/schema/extension.schema
# Use md5 to hash the passwords
password-hash {md5}
# Define global ACLs to disable default read access.
# Do not enable referrals until AFTER you have a working directory
# service AND an understanding of referrals.
#referral ldap://root.openldap.org
pidfile /var/run/openldap/slapd.pid
argsfile /var/run/openldap/slapd.args
# Define SSL and TLS properties (optional)
TLSCertificateFile /etc/ssl/ldap.pem
TLSCertificateKeyFile /etc/openldap/ssl/ldap.pem
TLSCACertificateFile /etc/ssl/ldap.pem
# Load dynamic backend modules:
# modulepath /usr/lib/openldap/openldap
# moduleload back_bdb.la
# moduleload back_ldap.la
# moduleload back_ldbm.la
# moduleload back_passwd.la
# moduleload back_shell.la
# Sample security restrictions
# Require integrity protection (prevent hijacking)
# Require 112-bit (3DES or better) encryption for updates
# Require 63-bit encryption for simple bind
# security ssf=1 update_ssf=112 simple_bind=64
# Sample access control policy:
# Root DSE: allow anyone to read it
# Subschema (sub)entry DSE: allow anyone to read it
# Other DSEs:
# Allow self write access
# Allow authenticated users read access
# Allow anonymous users to authenticate
# Directives needed to implement policy:
# access to dn.base="" by * read
# access to dn.base="cn=Subschema" by * read
# access to *
# by self write
# by users read
# by anonymous auth
#
# if no access controls are present, the default policy is:
# Allow read by all
#
# rootdn can always write!
#access to attrs=userPassword,sambaLMPassword,sambaNTPassword
# by self write
# by anonymous auth
# by * none
# access to *
# by * read
#######################################################################
# ldbm database definitions
#######################################################################
database ldbm
#checkpoint 32 30 # <kbyte> <min>
suffix "dc=my-domain,dc=com"
rootdn "cn=Manager,dc=my-domain,dc=com"
# Cleartext passwords, especially for the rootdn, should
# be avoid. See slappasswd(8) and slapd.conf(5) for details.
# Use of strong authentication encouraged.
rootpw {MD5}qMKu9pNBWW6S8eJNsh5KsA==
# The database directory MUST exist prior to running slapd AND
# should only be accessible by the slapd and slap tools.
# Mode 700 recommended.
directory /var/lib/openldap-ldbm
# Indices to maintain
#index objectClass eq
index objectClass,uidNumber,gidNumber eq
index cn,sn,uid,displayName pres,sub,eq
index memberUid,mail,givenname eq,subinitial
index sambaSID,sambaPrimaryGroupSID,sambaDomainName eq
ldap.conf
Code: Select all
# $OpenLDAP: pkg/ldap/libraries/libldap/ldap.conf,v 1.9 2000/09/04 19:57:01 kurt Exp $
#
# LDAP Defaults
#
# See ldap.conf(5) for details
# This file should be world readable but not world writable.
BASE dc=my-domain, dc=com
URI ldaps://servername.my-domain.com:636/
TLS_REQCERT allow
#SIZELIMIT 12
#TIMELIMIT 15
#DEREF never
slapd
Code: Select all
# conf.d file for the openldap-2.1 series
#
# To enable both the standard unciphered server and the ssl encrypted
# one uncomment this line or set any other server starting options
# you may desire.
#
# OPTS="-h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
#OPTS="-h 'ldaps:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
OPTS="-h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
system-auth
Code: Select all
#%PAM-1.0
auth required /lib/security/pam_env.so
auth sufficient /lib/security/pam_unix.so likeauth nullok shadow
auth sufficient /lib/security/pam_ldap.so use_first_pass
auth required /lib/security/pam_deny.so
account required /lib/security/pam_unix.so
account sufficient /lib/security/pam_ldap.so
#account required /lib/security/pam_deny.so
password required /lib/security/pam_cracklib.so retry=3
password sufficient /lib/security/pam_unix.so nullok use_authtok shadow md5
#password sufficient /lib/security/pam_unix.so nullok md5 shadow use_authtok
password sufficient /lib/security/pam_ldap.so use_authtok
password required /lib/security/pam_deny.so
session required /lib/security/pam_limits.so
session required /lib/security/pam_unix.so
#session required /lib/security/pam_mkhomedir.so skel=/etc/skel/ umask=0
session optional /lib/security/pam_ldap.so
# If you want to enable pam_console, uncomment the following line
# and read carefully README.pam_console in /usr/share/doc/pam*
#session optional /lib/security/pam_console.so
nsswitch.conf
Code: Select all
# /etc/nsswitch.conf:
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/nsswitch.conf,v 1.4 2002/11/18 19:39:22 azarah Exp $
#passwd: compat
#shadow: compat
#group: compat
passwd: files ldap
group: files ldap
shadow: files ldap
# passwd: db files nis
# shadow: db files nis
# group: db files nis
hosts: files dns wins
networks: files dns
services: db files
protocols: db files
rpc: db files
ethers: db files
netmasks: files
netgroup: files
bootparams: files
automount: files
aliases: files
smb.conf
Code: Select all
#======================= Global Settings =====================================
[global]
# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = My-Domain
# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
netbios name = servername
# server string is the equivalent of the NT Description field
server string = Home Server %v
# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s
# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = cups
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
printing = cups
# Samba 3.x supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to
# enable it below.
# printer admin = @<group> <user>
printer admin = @adm
# This should work well for winbind:
; printer admin = @"Domain Admins"
# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 500
# Set the log (verbosity) level (0 <= log level <= 10)
log level = 1
syslog = 0
# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
; hosts allow = 192.168.1. 192.168.2. 127.
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
guest account = nobody
# Allow users to map to guest:
map to guest = bad user
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server or security = domain
# When using security = domain, you should use password server = *
; password server = <NT-Server-Name>
; password server = *
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
time server = Yes
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT domain
# The smbpasswd file is only required by a server doing authentication, thus
# members of a domain do not need one.
; encrypt passwords = yes
; smb passwd file = /etc/samba/private/smbpasswd
# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
# You either need to setup a passwd program and passwd chat, or
# enable pam password change
; pam password change = yes
; passwd program = /usr/bin/passwd %u
; passwd program = /var/lib/samba/sbin/ldapsync.pl -o %u
; passwd chat = *New*password* %n\n *Retype*new*password* %n\n *modifying*
; passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n \
;*passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's
# and gid's. winbind uid and winbind gid are the only required parameters.
#
# winbind uid is the range of uid's winbind can use when mapping RIDs to uid's
; winbind uid = 10000-20000
#
# winbind gid is the range of uid's winbind can use when mapping RIDs to gid's
; winbind gid = 10000-20000
#
# winbind separator is the character a user must use between their domain
# name and username, defaults to "\"
; winbind separator = +
#
# winbind use default domain allows you to have winbind return usernames
# in the form user instead of DOMAIN+user for the domain listed in the
# workgroup parameter.
; winbind use default domain = yes
#
# template homedir determines the home directory for winbind users, with
# %D expanding to their domain name and %U expanding to their username:
; template homedir = /home/%D/%U
# When using winbind, you may want to have samba create home directories
# on the fly for authenticated users. Ensure that /etc/pam.d/samba is
# using 'service=system-auth-winbind' in pam_stack modules, and then
# enable obedience of pam restrictions below:
obey pam restrictions = yes
#
# template shell determines the shell users authenticated by winbind get
; template shell = /bin/bash
# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
interfaces = eth0, lo
bind interfaces only = Yes
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
remote announce = 192.168.1.255
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
os level = 65
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
logon script = %U.bat
; logon script = logon.bat
# Where to store roaming profiles for WinNT and Win2k
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Where to store roaming profiles for Win9x. Be careful with this as it also
# impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile
# The add user script is used by a domain member to add local user accounts
# that have been authenticated by the domain controller, or when adding
# users via the Windows NT Tools (ie User Manager for Domains).
# Scripts for file (passwd, smbpasswd) backend:
; add user script = /usr/sbin/useradd -s /bin/false '%u'
; delete user script = /usr/sbin/userdel '%s'
; add user to group script = /usr/bin/gpasswd -a '%u' '%g'
; delete user from group script = /usr/bin/gpasswd -d '%u' '%g'
; set primary group script = /usr/sbin/usermod -g '%g' '%u'
; add group script = /usr/sbin/groupadd %g && getent group '%g'|awk -F: '{print $3}'
; delete group script = /usr/sbin/groupdel '%g'
# Scripts for LDAP backend (assumes nss_ldap is in use on the domain controller.
# Needs IDEALX scripts, and configuration in smbldap_conf.pm.
# This assumes you've installed the IDEALX scripts into /usr/share/samba/scripts...
add user script = /var/lib/samba/sbin/smbldap-useradd.pl '%u'
delete user script = /var/lib/samba/sbin/smbldap-userdel.pl '%u'
add user to group script = /var/lib/samba/sbin/smbldap-groupmod.pl -m '%u' '%g'
delete user from group script = /var/lib/samba/sbin/smbldap-groupmod.pl -x '%u' '%g'
set primary group script = /var/lib/samba/sbin/smbldap-usermod.pl -g '%g' '%u'
add group script = /var/lib/samba/sbin/smbldap-groupadd.pl '%g' && /var/lib/samba/sbin/smbldap-groupshow.pl %g|
awk '/^gidNumber:/ {print $2}'
delete group script = /var/lib/samba/sbin/smbldap-userdel.pl '%g'
# The add machine script is use by a samba server configured as a domain
# controller to add local machine accounts when adding machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a group.
# Script for domain controller for adding machines:
; add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M %u
; add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null %u
# Script for domain controller with LDAP backend for adding machines (You need
# the IDEALX scripts, and to configure the smbldap_conf.pm first):
add machine script = /var/lib/samba/sbin/smbldap-useradd.pl -w -d /dev/null -s /bin/false %u
hide files = /desktop.ini/
# Domain groups:
# Domain groups are now configured by using the 'net groupmap' tool
# Samba Password Database configuration:
# Samba now has runtime-configurable password database backends. Multiple
# passdb backends may be used, but users will only be added to the first one
# Default:
; passdb backend = smbpasswd guest
# TDB backen with fallback to smbpasswd and guest
; passdb backend = tdbsam smbpasswd guest
# LDAP with fallback to smbpasswd guest
# Enable SSL by using an ldaps url, or enable tls with 'ldap ssl' below.
; passdb backend = ldapsam:ldaps://servername.my-domain.com smbpasswd guest
passdb backend = ldapsam:ldap://servername.my-domain.com
# Use the samba2 LDAP schema:
; passdb backend = ldapsam_compat:ldaps://ldap.mydomain.com smbpasswd guest
# idmap uid account range:
# This is a range of unix user-id's that samba will map non-unix RIDs to,
# such as when using Winbind
# idmap backend = ldap:ldap://servername.my-domain.com
idmap uid = 10000-20000
idmap gid = 10000-20000
map acl inherit = Yes
# LDAP configuration for Domain Controlling:
# The account (dn) that samba uses to access the LDAP server
# This account needs to have write access to the LDAP tree
# You will need to give samba the password for this dn, by
# running 'smbpasswd -w mypassword'
ldap admin dn = cn=Manager,dc=my-domain,dc=com
# ldap ssl = start_tls
# start_tls should run on 389, but samba defaults incorrectly to 636
; ldap port = 389
ldap suffix = dc=my-domain,dc=com
; ldap server = servername.my-domain.com
# Seperate suffixes are available for machines, users, groups, and idmap, if
# ldap suffix appears first, it is appended to the specific suffix.
# Example for a unix-ish directory layout:
ldap machine suffix = ou=People
ldap user suffix = ou=People
ldap group suffix = ou=Group
ldap idmap suffix = ou=People
ldap passwd sync = yes
ldap delete dn = Yes
# Example for AD-ish layout:
; ldap machine suffix = cn=Computers
; ldap user suffix = cn=Users
; ldap group suffix = cn=Groups
; ldap idmap suffix = cn=Idmap
# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
name resolve order = wins bcast hosts lmhosts
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = Yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Czech), 861 (???), 932 (Japanese),
# 936 (Simplified Chin.), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# More detail about code page is in
# "http://www.microsoft.com/globaldev/reference/oslocversion.mspx"
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
; dos charset = 850
; unix charset = ISO8859-1
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# You can enable VFS recycle bin on a per share basis:
# Uncomment the next 2 lines (make sure you create a
# .recycle folder in the base of the share and ensure
# all users will have write access to it. See
# examples/VFS/recycle/REAME in the samba docs for details
; vfs object = /usr/lib/samba/vfs/recycle.so
# Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
guest ok = yes
writable = no
locking = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
[Profiles]
path = /var/lib/samba/profiles
browseable = no
guest ok = yes
create mask = 0600
directory mask = 0700
profile acls = yes
read only = no
writable = yes
# This script can be enabled to create profile directories on the fly
# You may want to turn off guest acces if you enable this, as it
# hasn't been thoroughly tested.
;root preexec = PROFILE=/var/lib/samba/profiles/%u; if [ ! -e $PROFILE ]; \
; then mkdir -pm700 $PROFILE; chown %u:%g $PROFILE;fi
# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to swap the 'print command' line below with the commented one.
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# to allow user 'guest account' to print.
guest ok = yes
writable = no
printable = yes
create mode = 0700
# =====================================
# print command: see above for details.
# =====================================
print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
; print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
; lpq command = lpq -P %p
; lprm command = cancel %p-%j
# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/Samba-HOWTO-Collection.pdf
[print$]
path = /var/lib/samba/printers
browseable = yes
read only = yes
write list = @adm root
guest ok = yes
