Forums

Skip to content

Advanced search
  • Quick links
    • Unanswered topics
    • Active topics
    • Search
  • FAQ
  • Login
  • Register
  • Board index Assistance Kernel & Hardware
  • Search

vanilla-sources 2.6.12-rc4 warning [SOLVED] in 2.6.12-rc5

Kernel not recognizing your hardware? Problems with power management or PCMCIA? What hardware is compatible with Gentoo? See here. (Only for kernels supported by Gentoo.)
Post Reply
Advanced search
9 posts • Page 1 of 1
Author
Message
Cintra
Advocate
Advocate
User avatar
Posts: 2111
Joined: Sat Apr 03, 2004 3:49 pm
Location: Norway

vanilla-sources 2.6.12-rc4 warning [SOLVED] in 2.6.12-rc5

  • Quote

Post by Cintra » Sun May 08, 2005 7:54 am

Anyone thinking of trying this soon should make sure of a good backup first.

I tried it first on my jfs gentoo partition, did my usual make oldconfig, answered the one or two differences between -rc4 and -rc3 config and tried it.

Lots of printouts during boot, logged in to kde OK, but none of my usual partitions had mounted or were mountable. Compared rc4's .config with rc3 and they were identical but for a new printk= and bug= option in Kernel hacking.

Tried to reboot.. no go, had to reset. Rebooted to console only this time.

Restored partition!

Mvh
Last edited by Cintra on Sat May 28, 2005 9:17 am, edited 2 times in total.
"I am not bound to please thee with my answers" W.S.
Top
codergeek42
Bodhisattva
Bodhisattva
Posts: 5142
Joined: Mon Apr 05, 2004 4:44 am
Location: Anaheim, CA (USA)
Contact:
Contact codergeek42
Website

  • Quote

Post by codergeek42 » Sun May 08, 2005 8:03 am

I had a few Ext3 journal issues too. For some reason something tried to mount /home and /usr readonly while they were in heavy use. A reboot+fsck fixed that though. Very odd. *shrug*
~~ Peter: Programmer, Mathematician, STEM & Free Software Advocate, Enlightened Agent, Transhumanist, Fedora contributor
Who am I? :: EFF & FSF
Top
Cintra
Advocate
Advocate
User avatar
Posts: 2111
Joined: Sat Apr 03, 2004 3:49 pm
Location: Norway

  • Quote

Post by Cintra » Sun May 08, 2005 8:57 am

I was unable to use rc3 after the above, thats why a restore was made. At least I know my jfs backup restores OK now ;-)

Am in the process of updating rc3 again with -uD world and will try again when that checks OK, and has been backed up..
mvh

Edit: Ok, I re-emerged 2.6.12-rc4 and tried again - the following is the error from dmesg.. hopefully it will mean something to someone.
Btw just to emphasise, this happens on a JFS partition. Haven't tried one of my reiser partitions yet..

Code: Select all

May  8 13:25:25 p4pe syslog-ng[8007]: syslog-ng version 1.6.5 starting
May  8 13:25:25 p4pe syslog-ng[8007]: Changing permissions on special file /dev/tty12
May  8 13:25:25 p4pe rc4)
May  8 13:25:25 p4pe EIP is at reiserfs_panic+0x51/0x76
May  8 13:25:25 p4pe eax: 000000fb   ebx: c04082af   ecx: 000029f2   edx: c04ba801
May  8 13:25:25 p4pe esi: 00000000   edi: 00000140   ebp: ee8b1d78   esp: ee8b1bcc
May  8 13:25:25 p4pe ds: 007b   es: 007b   ss: 0068
May  8 13:25:25 p4pe Process mount (pid: 4541, threadinfo=ee8b0000 task=eee20590)
May  8 13:25:25 p4pe Stack: c0413bc0 c04082af c0553fa0 ffffffff ffffffff c03f2d8d c01ba03f 00000000
May  8 13:25:25 p4pe c0418760 000011bd 000002ad c03f2e0c 00000000 00000001 ee8b1d7c c01b8b0b
May  8 13:25:25 p4pe ef128000 ffffffff 00000000 ee8b0000 ee8b0000 ee8b0000 ee8b0000 ee8b0000
May  8 13:25:25 p4pe Call Trace:
May  8 13:25:25 p4pe [<c01ba03f>] search_by_key+0x148a/0x1c44
May  8 13:25:25 p4pe [<c01b8b0b>] is_tree_node+0x6c/0x71
May  8 13:25:25 p4pe [<c013ecf8>] __alloc_pages+0x173/0x3d8
May  8 13:25:25 p4pe [<c011a0a6>] call_console_drivers+0x67/0x13b
May  8 13:25:25 p4pe [<c01ad201>] finish_unfinished+0x9f/0x3a2
May  8 13:25:25 p4pe [<c012e1a5>] autoremove_wake_function+0x0/0x57
May  8 13:25:25 p4pe [<c01c516f>] do_journal_end+0x800/0x973
May  8 13:25:25 p4pe [<c02600c7>] vsprintf+0x27/0x2b
May  8 13:25:25 p4pe [<c01af96d>] reiserfs_fill_super+0x6c6/0x77e
May  8 13:25:25 p4pe [<c01a1591>] reiserfs_init_locked_inode+0x0/0x16
May  8 13:25:25 p4pe [<c015f82e>] sb_set_blocksize+0x2e/0x5e
May  8 13:25:25 p4pe [<c015f1f8>] get_sb_bdev+0xe0/0x145
May  8 13:25:25 p4pe [<c01742dc>] alloc_vfsmnt+0x9c/0xd1
May  8 13:25:25 p4pe [<c01afa91>] get_super_block+0x2f/0x36
May  8 13:25:25 p4pe [<c01af2a7>] reiserfs_fill_super+0x0/0x77e
May  8 13:25:25 p4pe [<c015f46c>] do_kern_mount+0x63/0xe9
May  8 13:25:25 p4pe [<c0175437>] do_new_mount+0x9e/0xf7
May  8 13:25:25 p4pe [<c0175b27>] do_mount+0x19d/0x1bb
May  8 13:25:25 p4pe [<c0175933>] copy_mount_options+0x60/0xb7
May  8 13:25:25 p4pe [<c0175ef4>] sys_mount+0x9f/0xd7
May  8 13:25:25 p4pe [<c0102a27>] sysenter_past_esp+0x54/0x75
May  8 13:25:25 p4pe Code: 24 8d be 40 01 00 00 e8 e2 fc ff ff 85 f6 89 d8 c7 44 24 08 a0 3f 55 c0 c7 04 24 c0 3b 41 c0 0f 45 c7 89 44 24 04 e8 9e 9a f6 ff <0f> 0b 6a 01 72 88 40 c0 85 f6 c7 44 24 08 a0 3f 55 c0 c7 04 24
May  8 13:25:25 p4pe <6>USB Universal Host Controller Interface driver v2.2
May  8 13:25:25 p4pe PCI: Found IRQ 4 for device 0000:00:1d.0
May  8 13:25:25 p4pe PCI: Sharing IRQ 4 with 0000:01:00.0
May  8 13:25:25 p4pe PCI: Setting latency timer of device 0000:00:1d.0 to 64
After the errors, the system loads KDE OK, but reiser partitions are unmountable.
Rebooting, doesn't :-(
But fsck -t jfs /dev/hdb3 works OK..
...
"I am not bound to please thee with my answers" W.S.
Top
Cintra
Advocate
Advocate
User avatar
Posts: 2111
Joined: Sat Apr 03, 2004 3:49 pm
Location: Norway

  • Quote

Post by Cintra » Sun May 08, 2005 12:15 pm

codergeek42 wrote:I had a few Ext3 journal issues too. For some reason something tried to mount /home and /usr readonly while they were in heavy use. A reboot+fsck fixed that though. Very odd. *shrug*
Do you have any reiserfs partitions?
mvh
"I am not bound to please thee with my answers" W.S.
Top
codergeek42
Bodhisattva
Bodhisattva
Posts: 5142
Joined: Mon Apr 05, 2004 4:44 am
Location: Anaheim, CA (USA)
Contact:
Contact codergeek42
Website

  • Quote

Post by codergeek42 » Sun May 08, 2005 2:49 pm

Cintra wrote:Do you have any reiserfs partitions?mvh
Nope. All eight of my partitions are Ext3. Perhaps this a ReiserFS-specific occurence?
~~ Peter: Programmer, Mathematician, STEM & Free Software Advocate, Enlightened Agent, Transhumanist, Fedora contributor
Who am I? :: EFF & FSF
Top
Cintra
Advocate
Advocate
User avatar
Posts: 2111
Joined: Sat Apr 03, 2004 3:49 pm
Location: Norway

  • Quote

Post by Cintra » Sun May 08, 2005 7:27 pm

Third time lucky..

Looking through dmesg I decided to turn off the following which were set:

Code: Select all

# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
At the same time I unmerged cryptsetup and device-mapper which I no longer saw a need for, and this time 2.6.12-rc4 came straight up.

I'll take some time tomorrow to find out which of these was the real cause..
Mvh

Edit: 1) re-emerged cryptsetup and device-mapper, rebooted, no problem, removed them again.
2) CONFIG_REISERFS_CHECK=y was compiled in again, and the same problem returned <<
[Bug 91968] http://bugs.gentoo.org/show_bug.cgi?id=91968

Edit 3: Added to the above bug ..on 2.6.12-rc4 when

Code: Select all

CONFIG_SND_USB_AUDIO=y 
my voip handset no longer works, however, using

Code: Select all

CONFIG_SND_USB_AUDIO=m
all is well.

NB! 2.6.12-rc3 works OK with =y
"I am not bound to please thee with my answers" W.S.
Top
Dr. Z
n00b
n00b
Posts: 30
Joined: Fri Nov 19, 2004 2:56 am

  • Quote

Post by Dr. Z » Wed May 11, 2005 4:11 am

Thanks Cintra, I had a ReiserFS 3 root partition which would not mount and this worked for me. As soon as I unset ReiserFS debugging everything started fine.
Top
Cintra
Advocate
Advocate
User avatar
Posts: 2111
Joined: Sat Apr 03, 2004 3:49 pm
Location: Norway

  • Quote

Post by Cintra » Wed May 11, 2005 4:18 am

Dr. Z wrote:Thanks Cintra, I had a ReiserFS 3 root partition which would not mount and this worked for me. As soon as I unset ReiserFS debugging everything started fine.
Thanks for the feedback Dr. Z..
I haven't tried with debug on my reiser root partitions yet, fearing worse than I experienced on my JFS root partition. Good to hear it wasn't a catastrophe
Mvh
"I am not bound to please thee with my answers" W.S.
Top
Cintra
Advocate
Advocate
User avatar
Posts: 2111
Joined: Sat Apr 03, 2004 3:49 pm
Location: Norway

  • Quote

Post by Cintra » Sat May 28, 2005 9:16 am

vanilla-sources-2.6.12-rc5 has fixed the above problem
I'm running with CONFIG_REISERFS_CHECK=y again OK
Mvh
"I am not bound to please thee with my answers" W.S.
Top
Post Reply

9 posts • Page 1 of 1

Return to “Kernel & Hardware”

Jump to
  • Assistance
  • ↳   News & Announcements
  • ↳   Frequently Asked Questions
  • ↳   Installing Gentoo
  • ↳   Multimedia
  • ↳   Desktop Environments
  • ↳   Networking & Security
  • ↳   Kernel & Hardware
  • ↳   Portage & Programming
  • ↳   Gamers & Players
  • ↳   Other Things Gentoo
  • ↳   Unsupported Software
  • Discussion & Documentation
  • ↳   Documentation, Tips & Tricks
  • ↳   Gentoo Chat
  • ↳   Gentoo Forums Feedback
  • ↳   Duplicate Threads
  • International Gentoo Users
  • ↳   中文 (Chinese)
  • ↳   Dutch
  • ↳   Finnish
  • ↳   French
  • ↳   Deutsches Forum (German)
  • ↳   Diskussionsforum
  • ↳   Deutsche Dokumentation
  • ↳   Greek
  • ↳   Forum italiano (Italian)
  • ↳   Forum di discussione italiano
  • ↳   Risorse italiane (documentazione e tools)
  • ↳   Polskie forum (Polish)
  • ↳   Instalacja i sprzęt
  • ↳   Polish OTW
  • ↳   Portuguese
  • ↳   Documentação, Ferramentas e Dicas
  • ↳   Russian
  • ↳   Scandinavian
  • ↳   Spanish
  • ↳   Other Languages
  • Architectures & Platforms
  • ↳   Gentoo on ARM
  • ↳   Gentoo on PPC
  • ↳   Gentoo on Sparc
  • ↳   Gentoo on Alternative Architectures
  • ↳   Gentoo on AMD64
  • ↳   Gentoo for Mac OS X (Portage for Mac OS X)
  • Board index
  • All times are UTC
  • Delete cookies

© 2001–2026 Gentoo Foundation, Inc.

Powered by phpBB® Forum Software © phpBB Limited

Privacy Policy

 

 

magic